Search

This paper presents the synthesis and characterization of graphene–polymer composites, focusing on their mechanical and antibacterial properties. Graphene flakes were obtained via an electrochemical method and integrated into polyamide 6 (PA6) matrices using melt intercalation. Various characterization techniques confirmed the quality of the graphene flakes, including X-ray diffraction (XRD), Raman spectroscopy, and infrared (IR) spectroscopy, as well as scanning and transmission electron microscopy (SEM and TEM) imaging. Mechanical tests showed an increase in the elastic modulus with graphene incorporation, while the impact strength decreased. The SEM analysis highlighted the dispersion of the graphene flakes within the composites and their impact on fracture behavior. Antimicrobial tests demonstrated significant antibacterial properties of the composites, attributed to both oxidative stress and mechanical damage induced by the graphene flakes. The results suggest promising applications for graphene–polymer composites in advanced antimicrobial materials. [ABSTRACT FROM AUTHOR]

Aluminum garnets display exceptional adaptability in incorporating mismatching elements, thereby facilitating the synthesis of novel materials with tailored properties. This study explored Ce3+-doped Tb3Al5−xScxO12 crystals (where x ranges from 0.5 to 3.0), revealing a novel approach to control luminescence and photoconversion through atomic size mismatch engineering. Raman spectroscopy confirmed the coexistence of garnet and perovskite phases, with Sc substitution significantly influencing the garnet lattice and induced A1g mode softening up to Sc concentration x = 2.0. The Sc atoms controlled sub-eutectic inclusion formation, creating efficient light scattering centers and unveiling a compositional threshold for octahedral site saturation. This modulation enabled the control of energy transfer dynamics between Ce3+ and Tb3+ ions, enhancing luminescence and mitigating quenching. The Sc admixing process regulated luminous efficacy (LE), color rendering index (CRI), and correlated color temperature (CCT), with adjustments in CRI from 68 to 84 and CCT from 3545 K to 12,958 K. The Ce3+-doped Tb3Al5−xScxO12 crystal (where x = 2.0) achieved the highest LE of 114.6 lm/W and emitted light at a CCT of 4942 K, similar to daylight white. This approach enables the design and development of functional materials with tailored optical properties applicable to lighting technology, persistent phosphors, scintillators, and storage phosphors. [ABSTRACT FROM AUTHOR]

Silver phosphate and its composites have been attracting extensive interest as photocatalysts potentially effective against pathogenic microorganisms. The purpose of the present study was to investigate the mechanism of bactericidal action on cells of opportunistic pathogens. The Ag3PO4/P25 (AGP/P25) and Ag3PO4/HA (HA/AGP) powders were prepared via a co-precipitation method. Thereafter, their antimicrobial properties against Enterococcus faecalis, Staphylococcus epidermidis, and Staphylococcus aureus (clinical and reference strains) were analyzed in the dark and after exposure to visible light (VIS). The mechanism leading to cell death was investigated by the leakage of metabolites and potassium ions, oxidative stress, and ROS production. Morphological changes of the bacterial cells were visualized by transmission electron microscopy (TEM) and scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy (SEM EDS) analysis. It has been shown that Ag3PO4-based composites are highly effective agents that can eradicate 100% of bacterial populations during the 60 min photocatalytic inactivation. Their action is mainly due to the production of hydroxyl radicals and photogenerated holes which lead to oxidative stress in cells. The strong affinity to the bacterial cell wall, as well as the well-known biocidal properties of silver itself, increase undoubtedly the antimicrobial potential of the Ag3PO4-based composites. [ABSTRACT FROM AUTHOR]

In this study, graphene flakes were obtained using an electrolytic method and characterized using X-ray diffraction (XRD), Raman and FTIR spectroscopy, scanning and transmission electron microscopy (SEM/TEM). Graphene-based composites with varying concentrations of 0.5%, 1% and 3% by weight were prepared with acrylic paint, enamel and varnish matrices. The mechanical properties were evaluated using micro-hardness testing, while wettability and antimicrobial activity against three pathogens (Staphylococcus aureus 33591, Pseudomonas aeruginosa 15442, Candida albicans 10231) were also examined. The results indicate that the addition of graphene flakes significantly enhances both the mechanical and antimicrobial properties of the coatings. [ABSTRACT FROM AUTHOR]

Four highly bioactive glasses in a binary SiO2–CaO system are prepared following a sol−gel method using Ca(OH)2 as a calcium precursor. In the synthesis of glass according to the modified Stöber method, Ca(OH)2 suspended in polyethylene glycol allows the elimination of the presence of calcite and the increase of ammonia concentration causes formation of spherical particles with different sizes in the range of 26–266 nm. The relation among the size and properties, including bioactivity, of the glass particles is evaluated. New glasses that vary in composition (10–25 wt% CaO), porosity (15–113 m2 g−1), and hydroxyl groups content greatly enhance the formation process of hydroxyapatite (HA) in simulated physiological fluids. For all glasses, superior apatite‐mineralization ability in time as short as 2 h in the physiological‐like buffer is achieved, thus exceeding the bioactivity of the known bioactive glasses, including 45S5 glass (Bioglass). The assessment of the safety and toxicity profile of the obtained glasses is verified in a wide range of concentrations (1–1000 µg mL−1) against human dermal fibroblasts and MC3T3 mouse osteoblast precursors, but also to human erythrocytes by determining hemocompatibility. Two glasses of different sizes, 73 and 266 nm, are promising and warrant further research. [ABSTRACT FROM AUTHOR]

Catalytic combustion of hazardous particulate matter (soot) generated by automobile engines is a primary method of their elimination. Ruthenium-based catalysts are a promising alternative for traditional noble metal (Pt, Pd) based systems; however, their relatively poor thermal stability hinders wide applications. In this study, we synthesized a novel, highly active, and stable catalyst for soot oxidation containing bimetallic RuRe nanoparticles supported on TiO2. The RuRe NPs were synthesized by colloidal, microwave-assisted polyol method and deposited on rutile or anatase TiO2. The effect of rhenium content and the nature of TiO2 support on the performance of RuRe nanoparticles (NPs) in the soot oxidation under air atmosphere was investigated. Bimetallic RuRe/TiO2 nanocatalysts exhibited higher activity in the soot oxidation than Ru/TiO2 systems, and the rutile supported 2 wt% Ru–0.4 wt% Re nanocatalyst (Ru/Re atomic ratio of 9:1) showed the best catalytic performance (T50 = 340 °C and T90 < 400 °C). All studied nanocatalysts were stable under reaction conditions in the consecutive catalytic tests. The exceptional catalytic performance of bimetallic RuRe NPs is explained by the synergy effect between ruthenium, rhenium, and TiO2. [ABSTRACT FROM AUTHOR]

We report on the magnetocaloric and thermoelectric properties of CeCrGe3. The compound crystallizes in the BaNiO3-type crystal structure (space group P63/mmc, no. 194, hP10) and undergoes paramagnetic to ferromagnetic phase transition at 70 K, close to the temperature of nitrogen condensation. The transition is found to be second order in nature as evidenced from the Arrott plot analysis. The reversible magnetocaloric effect was observed at low temperature with the magnetic entropy change reaching ΔSm = −2.2 J/(kg K) around 70 K in a magnetic field change of 5 T, with the relative cooling power of RCP = 57 J/kg and the adiabatic temperature change of ΔTad = 0.8 K. The electrical resistivity of CeCrGe3 shows a metalliclike behavior up to 900 K. The Seebeck coefficient remains positive from 2 K up to 900 K and reveals a broad maximum with Smax = 18 μV/K at 300 K. The thermal conductivity near room temperature is of the order of 5.3 W/(m K), resulting in a small value of thermoelectric figure of merit ZT = 0.005. [ABSTRACT FROM AUTHOR]

Amyloid fibrils are widely studied both as target in conformational disorders and as basis for the development of protein-based functional materials. The three Zr phthalocyanines bearing dehydroacetic acid residue (PcZr(L1)2) and its condensed derivatives (PcZr(L2)2 and PcZr(L3)2) as out-of-plane ligands were synthesized and their influence on insulin fibril formation was studied by amyloid-sensitive fluorescent dye based assay, scanning electron microscopy, fluorescent and absorption spectroscopies. The presence of Zr phthalocyanines was shown to modify the fibril formation. The morphology of fibrils formed in the presence of the Zr phthalocyanines differs from that of free insulin and depends on the structure of out-of-plane ligands. It is shown that free insulin mostly forms fibril clusters with the length of about 0.3–2.1 μm. The presence of Zr phthalocyanines leads to the formation of individual 0.4–2.8 μm-long fibrils with a reduced tendency to lateral aggregation and cluster formation (PcZr(L1)2), shorter 0.2–1.5 μm-long fibrils with the tendency to lateral aggregation without clusters (PcZr(L2)2), and fibril-like 0.2–1.0 μm-long structures (PcZr(L3)2). The strongest influence on fibrils morphology made by PcZr(L3)2 could be explained by the additional stacking of phenyl moiety of the ligand with aromatic amino acids in protein. The evidences of binding of studied Zr phthalocyanines to mature fibrils were shown by absorption spectroscopy (for PcZr(L1)2 and PcZr(L2)2) and fluorescent spectroscopy (for PcZr(L3)2). These complexes could be potentially used as external tools allowing the development of functional materials on protein fibrils basis. [ABSTRACT FROM AUTHOR]

Abstract: Single crystals of α-Sm3+:Na3Y(VO4)2 have been grown by the flux growth method. The absorption (300K) fluorescence (4.2 and 300K) and excitation (7 and 300K) spectra as well as the fluorescence dynamics of the Sm3+-doped title crystals are presented and analyzed in detail. The energy transfer between Sm3+–Sm3+ as well as from VO4 3− to Sm3+ were studied in detail. A Judd–Ofelt intensity analysis of the absorption (300K) spectrum has been applied for determination of Ω λ parameters which in turn have been used in calculation of the radiative transition probability factor (A), fluorescence branching ratios (β), natural (radiative) lifetime of the 4G(4)5/2 level of Sm3+ and emission cross-section (σ em ). For the first time very large lifetimes of the Sm3+ fluorescence level have been observed. [Copyright &y& Elsevier]

The influence of the calcination process on the physicochemical properties and catalytic behavior of the Co/Mg/La catalysts for ammonia synthesis has been investigated. The catalysts were prepared using the different thermal pre-treatment methods prior to the activation, i.e., drying and calcination, and the respective activities for ammonia synthesis were assessed. It was found out that changing from air calcination prior to activation to direct activation of the co-precipitated species led to the different catalytic performances. The most favorable catalytic performance was achieved with Co/Mg/La prepared by calcination in air. Detailed characterization methods, employing e.g., XRPD, H2-TPD, N2-TPD, CO2-TPD, SEM, and TEM, showed that the superior catalytic behavior of this catalyst was attributed to its strong basicity and favorable adsorption properties toward hydrogen and nitrogen. [ABSTRACT FROM AUTHOR]

Looking for upconverting biocompatible nanoparticles, we have prepared by the sol–gel method, silica–calcia glass nanopowders doped with different concentration of Tm3+ and Yb3+ ions (Tm3+ from 0.15 mol% up to 0.5 mol% and Yb3+ from 1 mol% up to 4 mol%) and characterized their structure, morphology, and optical properties. X-ray diffraction patterns indicated an amorphous phase of the silica-based glass with partial crystallization of samples with a higher content of lanthanides ions. Transmission electron microscopy images showed that the average size of particles decreased with increasing lanthanides content. The upconversion (UC) emission spectra and fluorescence lifetimes were registered under near infrared excitation (980 nm) at room temperature to study the energy transfer between Yb3+ and Tm3+ at various active ions concentrations. Characteristic emission bands of Tm3+ ions in the range of 350 nm to 850 nm were observed. To understand the mechanism of Yb3+–Tm3+ UC energy transfer in the SiO2–CaO powders, the kinetics of luminescence decays were studied. [ABSTRACT FROM AUTHOR]

Ni-rich layered oxides, i.e., LiNi0.6Mn0.2Co0.2O2 (NMC622) and LiNiO2 (LNO), were prepared using the two-step calcination procedure. The samples obtained at different calcination temperatures (750–950 °C for the NMC622 and 650–850 °C for the LNO cathode materials) were characterized using nitrogen physisorption, PXRD, SEM and DLS methods. The correlation of the calcination temperature, structural properties and electrochemical performance of the studied Ni-rich layered cathode materials was thoroughly investigated and discussed. It was determined that the optimal calcination temperature is dependent on the chemical composition of the cathode materials. With increasing nickel content, the optimal calcination temperature shifts towards lower temperatures. The NMC-900 calcined at 900 °C and the LNO-700 calcined at 700 °C showed the most favorable electrochemical performances. Despite their well-ordered structure, the materials calcined at higher temperatures were characterized by a stronger sintering effect, adverse particle growth, and higher Ni2+/Li+ cation mixing, thus deteriorating their electrochemical properties. The importance of a careful selection of the heat treatment (calcination) temperature for each individual cathode material was emphasized. [ABSTRACT FROM AUTHOR]

Thermoelectric properties of the half-Heusler phase ScNiSb (space group F 4 ¯ 3m) were studied on a polycrystalline single-phase sample obtained by arc-melting and spark-plasma-sintering techniques. Measurements of the thermopower, electrical resistivity, and thermal conductivity were performed in the wide temperature range 2–950 K. The material appeared as a p-type conductor, with a fairly large, positive Seebeck coefficient of about 240 μV K−1 near 450 K. Nevertheless, the measured electrical resistivity values were relatively high (83 μΩm at 350 K), resulting in a rather small magnitude of the power factor (less than 1 × 10−3 W m−1 K−2) in the temperature range examined. Furthermore, the thermal conductivity was high, with a local minimum of about 6 W m−1 K−1 occurring near 600 K. As a result, the dimensionless thermoelectric figure of merit showed a maximum of 0.1 at 810 K. This work suggests that ScNiSb could be a promising base compound for obtaining thermoelectric materials for energy conversion at high temperatures. [ABSTRACT FROM AUTHOR]

We report on the magnetocaloric and thermoelectric properties of CeCrGe3. The compound crystallizes in the BaNiO3-type crystal structure (space group P63/mmc, no. 194, hP10) and undergoes paramagnetic to ferromagnetic phase transition at 70 K, close to the temperature of nitrogen condensation. The transition is found to be second order in nature as evidenced from the Arrott plot analysis. The reversible magnetocaloric effect was observed at low temperature with the magnetic entropy change reaching ΔSm = −2.2 J/(kg K) around 70 K in a magnetic field change of 5 T, with the relative cooling power of RCP = 57 J/kg and the adiabatic temperature change of ΔTad = 0.8 K. The electrical resistivity of CeCrGe3 shows a metalliclike behavior up to 900 K. The Seebeck coefficient remains positive from 2 K up to 900 K and reveals a broad maximum with Smax = 18 μV/K at 300 K. The thermal conductivity near room temperature is of the order of 5.3 W/(m K), resulting in a small value of thermoelectric figure of merit ZT = 0.005. [ABSTRACT FROM AUTHOR]