Search

Engineering of materials is crucial for the advanced detection of bio‐molecules, particularly in laser desorption/ionization mass spectrometry (LDI‐MS). However, effective screening with enhanced LDI performance remains challenging due to the lack of engineered substrate materials. Herein, thermally engineered ferric yolk‐shells are designed for enhanced metabolic screening of cervical cancer (CC) using vaginal secretion. A facile thermal engineering strategy is developed to prepare amorphous ferric yolk‐shells with integrated properties. Notably, the amorphous mesoporous yolk‐shells offer signal amplification up to orders of magnitude in LDI‐MS for standard metabolites and diverse bio‐samples. High‐performance CC screening (including identification of human papillomavirus (HPV) infection, high‐grade squamous intraepithelial lesion (HSIL), and CC) is achieved, with the areas under the curve of 0.842–0.963. Finally, a metabolic panel for CC screening, covering the stages of HPV, HSIL, and CC, is established. This work elucidates the LDI‐MS mechanism for enhanced metabolic detection and highlights potential applications in cancer screening. [ABSTRACT FROM AUTHOR]

It is a challenge to polish the interior surface of a small bent pipe with complex structures and sizes less than 0.5 mm. This is because of the fact that traditional polishing methods could destroy, block, or break the small complex structures. For a small bent pipe made of aluminum alloy produced using additive manufacturing, the defects, such as adhered powders and spatters, are easy to jam the pipe without polishing, possibly resulting in catastrophic failure for aerospace applications. To overcome this challenge, a novel water jet polisher was developed using soft polymethyl methacrylate (PMMA) abrasives. After polishing a specific area, the adhered powders on the interior surface were reduced from over 140 to 2, 3, and 6 by the soft abrasives with mesh sizes of 200, 400, and 600, respectively. The surface roughness Sa was decreased from 3.41 to 0.92 μm after polishing using PMMA abrasives with a mesh size of 200. In comparison, silica abrasives were also employed to polish the small bent pipes, leading to the bent part of pipes breaking. However, this kind of failure was absent when using soft abrasives. Computational fluid dynamics calculations elucidate that a peak erosion rate of silica abrasives for a bent pipe with a turn angle of 30° is 2.18 kg/(m2·s), which is 17 times that of soft abrasives. This is why the small bent pipe was broken using silica abrasives, whereas it remained intact when polished with soft abrasives. In addition, water jet polishing has a lower erosion rate, a relatively smooth erosion curve, and less erosion energy, leaving the bent parts intact. The developed soft abrasive water jet polisher and the findings of this study suggest new possibilities for cleaning the adhered powders and spatters and polishing the interior surface of small bent pipes with complex structures. [ABSTRACT FROM AUTHOR]

Engineering the surface structure of semiconductor is one of the most promising strategies for improving the separation and transfer efficiency of charge, which is a key issue in photocatalysis. Here, we designed and fabricated the C decorated hollow TiO2 photocatalysts (C–TiO2), in which 3-aminophenol-formaldehyde resin (APF) spheres were used as template and carbon precursor. It was determined that the C content can be easily controlled by calcinating the APF spheres with different time. Moreover, the synergetic effort between the optimal C content and the formed Ti–O–C bonds in C–TiO2 were determined to increase the light absorption and greatly promote the separation and transfer of charge in the photocatalytic reaction, which is verified from UV–vis, PL, photocurrent, and EIS characterizations. Remarkably, the activity of the C–TiO2 is 5.5-fold higher than that of TiO2 in H2 evolution. A feasible strategy for rational design and construction of surface-engineered hollow photocatalysts to improve the photocatalytic performance was provided in this study. [ABSTRACT FROM AUTHOR]

Quartz glass shows superior physicochemical properties and is used in modern high technology. Due to its hard and brittle characteristics, traditional polishing slurry mostly uses strong acid, strong alkali, and potent corrosive additives, which cause environmental pollution. Furthermore, the degree of damage reduces service performance of the parts due to the excessive corrosion. Therefore, a novel quartz glass green and efficient non-damaging chemical mechanical polishing slurry was developed, consisting of cerium oxide (CeO2), Lanthanum oxyfluoride (LaOF), potassium pyrophosphate (K4P2O7), sodium N-lauroyl sarcosinate (SNLS), and sodium polyacrylate (PAAS). Among them, LaOF abrasive showed hexahedral morphology, which increased the cutting sites and uniformed the load. The polishing slurry was maintained by two anionic dispersants, namely SNLS and PAAS, to maintain the suspension stability of the slurry, which makes the abrasive in the slurry have a more uniform particle size and a smoother sample surface after polishing. After the orthogonal test, a surface roughness (Sa) of 0.23 nm was obtained in the range of 50 × 50 μm2, which was lower than the current industry rating of 0.9 nm, and obtained a material removal rate (MRR) of 530.52 nm/min. [ABSTRACT FROM AUTHOR]

Single-atom non-precious metal oxygen reduction reaction (ORR) catalysts have attracted much attention due to their low cost, high selectivity, and high activity. Herein, we successfully prepared iron single atoms anchored on nitrogen-doped carbon matrix/nanotube hybrid supports (FeSA-NC/CNTs) by the pyrolysis of Fe-doped zeolitic imidazolate frameworks. The nitrogen-doped carbon matrix/carbon nanotube hybrid supports exhibit a specific surface area of 1626.814 m2 g−1, which may facilitate electron transfer and oxygen mass transport within the catalyst and be beneficial to ORR performance. Further electrochemical results revealed that our FeSA-NC/CNTs catalyst exhibited excellent ORR activity (half-wave potential: 0.86 V; kinetic current density: 39.3 mA cm−2 at 0.8 V), superior to that of commercial Pt/C catalyst (half-wave potential: 0.846 V; kinetic current density: 14.4 mA cm−2 at 0.8 V). It also has a great stability, which makes it possible to be a valuable non-noble metal electrode material that may replace the latest commercial Pt/C catalyst in the future. [ABSTRACT FROM AUTHOR]

Fenofibrate is widely used in clinical therapy to effectively ameliorate the development of non-alcoholic fatty liver disease (NAFLD); however, its specific molecular mechanism of action remains largely unknown. MicroRNAs (miRNAs) are key mediators in regulating endoplasmic reticulum (ER) stress during NAFLD, and the deregulation of miRNAs has been demonstrated in NAFLD pathophysiology. The present study aimed to identify whether fenofibrate could influence miRNA expression in NAFLD and investigate the specific mechanism of action of fenofibrate in lipid metabolism disorder-associated diseases. We found that fenofibrate alleviated ER stress and increased the levels of SERCA2b, which serves as a regulator of ER stress. Additionally, the levels of let-7 miRNA were regulated by fenofibrate; let-7 was found to target the 3′ untranslated region of SERCA2b. The present data suggest that the protective effects of fenofibrate against insulin resistance and its suppressive activity against excessive hepatic lipid accumulation may be related to the alteration of the let-7/SERCA2b axis and alleviation of ER stress. [ABSTRACT FROM AUTHOR]

Nonalcoholic fatty liver disease (NAFLD) results from an abnormal accumulation of lipids within hepatocytes, and is commonly associated with obesity, insulin resistance, and hyperlipidemia. Metformin is commonly used to treat type 2 diabetes mellitus and, in recent years, it was found to play a potential role in the amelioration of NAFLD. However, the mechanisms underlying the protective effect of metformin against NAFLD remain largely unknown. Transcription factor EB (TFEB) is a master transcriptional regulator of lysosomal biogenesis and autophagy and, when activated, is effective against disorders of lipid metabolism. However, the role of TFEB in hepatic steatosis is not well understood. In this report, we demonstrate that the activity of TFEB is reduced in the liver of mice fed a high-fat diet. Metformin treatment significantly reverses the activity of TFEB, and the protective effect of metformin against hepatic steatosis and insulin resistance is dependent on TFEB. We show that metformin-induced autophagy is regulated by TFEB, and our findings reveal that TFEB acts as a mediator, linking metformin with autophagy to reverse NAFLD, and highlight that TFEB may be a promising molecular target for the treatment of NAFLD. [ABSTRACT FROM AUTHOR]

Janus structures that include different functional compartments have attracted significant attention due to their specific properties in a diverse range of applications. However, it remains challenge to develop an effective strategy for achieving strong interfacial interaction. Herein, a Janus nanoreactor consisting of TiO2 2D nanocrystals integrated with Prussian blue analog (PBA) single crystals is proposed and synthesized by mimicking the planting process. In situ etching of PBA particles induces nucleation and growth of TiO2 nanoflakes onto the concave surface of PBA particles, and thus enhances the interlayer interaction. The anisotropic PBA–TiO2 Janus nanoreactor demonstrates enhanced photocatalytic activities for both water reduction and oxidation reactions compared with TiO2 and PBA alone. As far as it is known, this is the first PBA‐based composite that serves as a bifunctional photocatalyst for solar water splitting. The interfacial structure between two materials is vital for charge separation and transfer based on the spectroscopic studies. These results shed light on the elaborate construction of Janus nanoreactor, highlighting the important role of interfacial design at the microscale level. [ABSTRACT FROM AUTHOR]

Auto-switchable power supply systems on the basis of Prussian blue (PB) coordination polymers can smartly tackle both high energy and high power electricity requirements in seawater. To adapt to the complex underwater conditions, it is very important to make the coordination polymer electrode flexible. In this study, we succesfully grew a PB film on a carbon felt. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) confirmed that the PB layer was about 500 ± 50 nm in thickness. The electrochemical modification of the carbon felt guaranteed a strong coating of the PB layer. The obtained electrode worked effectively under bending and in vigorously flowing water. This PB coating was not detached during working under mechanical deformation. Both high-energy and high-power modes were realized in this system even when the PB electrode was deformed, permitting this seawater energy extraction system to support several electronic devices. [ABSTRACT FROM AUTHOR]

A class of general weakly nonlinear perturbation equations is studied. The nonhomogeneous term of the equation is expressed as Fourier series. The uniformly valid asymptotic solutions are obtained using the direct expansion method, the renormalization method, the multiple scale method, respectively for three different cases. The expression of the solution of a special weakly nonlinear perturbation equation in the related reference is given concretely and exactly by the result with the Fourier coefficients. For the first two cases, the results are consistent with the those in the reference, and the nature of the solution is revealed with a higher point of view. For the third case, the asymptotic solution with first-order is obtained, which was not discussed in the references. [ABSTRACT FROM AUTHOR]