Search

The recovery of carbon fibres from waste and end-of-life carbon fibre reinforced plastic materials is both economically lucrative and environmentally necessary. Here, we characterise the physical and mechanical properties of recycled carbon fibre reinforced plastics (rCFRPs) composed of random and oriented non-woven recycled carbon fibre mats that were impregnated with liquid epoxy matrices using a vacuum-infusion set-up. The low areal density and poor compactability of the non-woven mats implied that press-moulding upon impregnation was essential to control laminate thickness and improve fibre content; this may limit the applications of the resulting rCFRPs. Moreover, the press consolidation process is thought to degrade fibre length, and is a likely cause for the lower-than-expected tensile properties of the rCFRPs. Expectedly, the oriented rCFRPs exhibited better tensile and compressive properties than the random rCFRPs. Notably, while the tensile strength of the rCFRPs was only up to 2.5 times better than the matrix, the tensile modulus was 4–10 times enhanced. Through a comparative literature survey, we found that the liquid composite moulded rCFRPs were outperformed by rCFRPs fabricated through other manufacturing processes (e.g. prepregging), particularly those employing high compaction pressures, and utilising long fibres recovered through pyrolysis and chemical processes, rather than the fluidised-bed process. [ABSTRACT FROM AUTHOR]

This article evaluates the mechanical properties of vacuum-infused unidirectional plant fiber composites (PFRPs), composing of bast fiber yarns and thermoset matrices. PFRPs are found to have lower fiber volume fractions than E-glass composites (GFRPs). Apart from the expected (30–40%) lower density of PFRPs, they have 60–80% lower tensile strength, 30–60% lower tensile stiffness, 5–10 times lower impact strength, and 20–30% lower interlaminar shear strength than GFRPs. Importantly, critical fiber lengths are of the same order (0.2–0.5 mm). Composites reinforced with flax rovings exhibit exceptional fiber tensile modulus of 65–75 GPa and fiber tensile strength of about 800 MPa. [ABSTRACT FROM PUBLISHER]

The structural potential of plant fibres as reinforcing agents can only be realized when the highest reinforcement efficiency is employed. Hence, aligned plant fibre composites are of interest. However, due to the short length of technical plant fibres, the reinforcement needs to be in the form of staple fibre yarns, which have a twisted structure. Although twist facilitates yarn processability, it has several detrimental effects on the composites produced from such twisted yarn reinforcements; one of which is fibre obliquity and misalignment. This results in a drastic drop in composite mechanical properties. No analytical model currently exists to accurately predict the effect of yarn twist on aligned plant fibre composite tensile strength. In this paper, a novel mathematical model is developed. The model is based on (i) a modified rule of mixtures for plant fibre composites, (ii) well-defined structure-property relationships in an idealised twisted staple fibre yarn and (iii) the Krenchel orientation efficiency factor. The developed model includes a corrected orientation efficiency factor of cos2(2α), where α is the yarn surface twist angle. The model is validated with extensive experimental data from Goutianos and Peijs (Goutianos S, Peijs T (2003) Adv Compos Lett 12(6):237) and is found to be a near-perfect fit (R2 = 0.960). Experimental data from other studies are also used for further verification. [ABSTRACT FROM AUTHOR]

Composites in load-bearing applications are often exposed to off-axis loads. For plant fiber composites (PFCs) to be seriously and readily considered in structural applications, knowledge and reliable prediction of their response to off-axis loads is critical. This article (i) characterizes the stress-strain response, (ii) investigates the tensile properties, and (iii) analyses the fracture modes, of unidirectional flax-polyester composites subjected to off-axis tensile loading. A key finding of this study is that due to the nonlinear stress-strain response of PFCs, the apparent stiffness of the composite reduces by ∼30% in the strain range of 0.05 to 0.25%. In addition, through cyclic tests on the composites, the elastic strain limit is found to be only ∼0.15%. This has major implications on the strain range to be used for the determination of the composite elastic Young's modulus. Consequently, it is proposed that the tensile modulus for PFCs should be measured in the strain range of 0.025 to 0.100%. Through comparison with experimental data, conventional composite micromechanical models are found to be adequate in quantitatively describing the tensile behavior of off-axis loaded PFCs. The application of such models has also enabled the determination of, otherwise difficult to measure, material properties, such as fiber shear and transverse modulus. Off-axis loaded PFCs fail by three distinct fracture modes in three different off-axis ranges; each fracture mode produces a unique fracture surface. POLYM. COMPOS. 2012. © 2012 Society of Plastics Engineers [ABSTRACT FROM AUTHOR]

A detailed review of the current state-of-art for wind turbine blade design is presented, including theoretical maximum efficiency, propulsion, practical efficiency, HAWT blade design, and blade loads. The review provides a complete picture of wind turbine blade design and shows the dominance of modern turbines almost exclusive use of horizontal axis rotors. The aerodynamic design principles for a modern wind turbine blade are detailed, including blade plan shape/quantity, aerofoil selection and optimal attack angles. A detailed review of design loads on wind turbine blades is offered, describing aerodynamic, gravitational, centrifugal, gyroscopic and operational conditions. [ABSTRACT FROM AUTHOR]