Search

In recent years, polyelectrolytes have been successfully used as an alternative to non-collagenous proteins to promote interfibrillar biomineralization, to reproduce the spatial intercalation of mineral phases among collagen fibrils, and to design bioinspired scaffolds for hard tissue regeneration. Herein, hybrid nanofibers were fabricated via electrospinning, by using a mixture of Poly ɛ-caprolactone (PCL) and cationic cellulose derivatives, i.e., cellulose-bearing imidazolium tosylate (CIMD). The obtained fibers were self-assembled with Sodium Alginate (SA) by polyelectrolyte interactions with CIMD onto the fiber surface and, then, treated with simulated body fluid (SBF) to promote the precipitation of calcium phosphate (CaP) deposits. FTIR analysis confirmed the presence of SA and CaP, while SEM equipped with EDX analysis mapped the calcium phosphate constituent elements, estimating an average Ca/P ratio of about 1.33—falling in the range of biological apatites. Moreover, in vitro studies have confirmed the good response of mesenchymal cells (hMSCs) on biomineralized samples, since day 3, with a significant improvement in the presence of SA, due to the interaction of SA with CaP deposits. More interestingly, after a decay of metabolic activity on day 7, a relevant increase in cell proliferation can be recognized, in agreement with the beginning of the differentiation phase, confirmed by ALP results. Antibacterial tests performed by using different bacteria populations confirmed that nanofibers with an SA-CIMD complex show an optimal inhibitory response against S. mutans, S. aureus, and E. coli, with no significant decay due to the effect of CaP, in comparison with non-biomineralized controls. All these data suggest a promising use of these biomineralized fibers as bioinspired membranes with efficient antimicrobial and osteoconductive cues suitable to support bone healing/regeneration. [ABSTRACT FROM AUTHOR]

The current study aims to prepare carbohydrate nanocomposite based on 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidized cellulose nanofibers (CNFs) /chitosan chloride (Ch) decorated with silver nanoparticles (Ag-NPs) and designed as (TEMPO/CNF/Ch/Ag-NPs) that was investigated as antimicrobial materials and applied as efficient sorbent. CNF was prepared from cellulose through TEMPO oxidation-mechanical defibrillation technique. Anionic CNF and Ch were ironically interacted to prepare novel sustainable ionic nanofibers films. Ag-NPs having approximately 20 nm were prepared in situ to decorate the ionic fibers. The effects of experimental parameters including media pH (3.0–8.0), contact time (10–120 min), and initial methylene blue (MB) concentration (50–800 ppm) on the adsorption behavior of MB onto nanocomposite films were evaluated. The results exhibited similar and fast adsorption kinetic, as illustrated by the pseudo-second-order model. The adsorption results were best suited by the Langmuir isotherm model, and the maximum adsorption capacity for the TEMPO/CNF/Ch and TEMPO/CNF/Ch/Ag-NPs nanocomposite was 369 and 432 mg/g, respectively, at the optimized media pH of 7 with a contact time of 60 min at 88 to 90 mg/g of MB. In kinetic studies, the pseudo-second-order model for nanocomposite films provided the best fit (R2 = 0.98), than pseudo-first-order model (R2 = 0.82 and 0.77). The TEMPO/CNF/Ch and TEMPO/CNF/Ch/Ag-NPs nanocomposite retains 73 and 69% of its initial adsorption performance towards MB after five consecutive runs. The formed nanocomposite showed excellent efficacy against Escherichia coli (14.3 ± 0.57 mm), followed by Candida albicans (12 ± 1 mm), Staphylococcus aureus (11.3 ± 1.15 mm), and Streptococcus mutans (10.6 ± 1.15 mm), and their antimicrobial activity was enhanced by the incorporation of Ag-NPs. The formed nanocomposite might find applications in industrial and biomedical fields. [ABSTRACT FROM AUTHOR]

The use of polyelectrolytes is emerging as a fascinating strategy for the functionalization of biomedical membranes, due to their ability to enhance biological responses using the interaction effect of charged groups on multiple interface properties. Herein, two different polyelectrolytes were used to improve the antibacterial properties of polycaprolactone (PCL) nanofibers fabricated via electrospinning. First, a new cationic cellulose derivative, cellulose-bearing imidazolium tosylate (CIMD), was prepared via the nucleophilic substitution of the tosyl group using 1-methylimidazole, as confirmed by NMR analyses, and loaded into the PCL nanofibers. Secondly, sodium alginate (SA) was used to uniformly coat the fibers' surface via self-assembly, as remarked through SEM-EDX analyses. Polyelectrolyte interactions between the CIMD and the SA, initially detected using a FTIR analysis, were confirmed via Z potential measurements: the formation of a CMID/SA complex promoted a substantial charge neutralization of the fibers' surfaces with effects on the physical properties of the membrane in terms of water adsorption and in vitro degradation. Moreover, the presence of SA contributed to the in vitro response of human mesenchymal stem cells (hMSCs), as confirmed by a significant increase in the cells' viability after 7 days in the case of the PCL/CMID/SA complex with respect to the PCL and PCL/CMID membranes. Contrariwise, SA did not nullify the antibacterial effect of CMID, as confirmed by the comparable resistance exhibited by S. mutans, S. aureus, and E. coli to the PCL/CIMD and PCL/CIMD/SA membranes. All the reported results corroborate the idea that the CIMD/SA functionalization of PCL nanofibers has a great potential for the fabrication of efficient antimicrobial membranes for wound healing. [ABSTRACT FROM AUTHOR]

In biomedical applications, bacterial cellulose (BC) is widely used because of its cytocompatibility, high mechanical properties, and ultrafine nanofibrillar structure. However, biomedical use of neat BC is often limited due to its lack of antimicrobial properties. In the current article, we proposed a novel technique for preparing cationic BC hydrogel through in situ incorporation of cationic water-soluble cellulose derivative, cellulose bearing imidazolium tosylate function group (Cell-IMD), in the media used for BC preparation. Different concentrations of cationic cellulose derivative (2, 4, and 6%) were embedded into a highly inter-twined BC nanofibrillar network through the in situ biosynthesis until forming cationic cellulose gels. Cationic functionalization was deeply examined by the Fourier transform infrared (FT–IR), NMR spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) methods. In vitro studies with L929 cells confirmed a good cytocompatibility of BC/cationic cellulose derivatives, and a significant increase in cell proliferation after 7 days, in the case of BC/Cell-IMD3 groups. Finally, antimicrobial assessment against Staphylococcus aureus, Streptococcus mutans, and Candida albicans was assessed, recording a good sensitivity in the case of the higher concentration of the cationic cellulose derivative. All the results suggest a promising use of cationic hybrid materials for biomedical and bio-sustainable applications (i.e., food packaging). [ABSTRACT FROM AUTHOR]

This study investigated bioethanol production from rice straw (RS) and sugarcane bagasse (SCB) which containing 72.8 and 73.2% holocellulose, 56.8 and 58.6% α-cellulose, and 14.9 and 25.1% lignin for RS and SCB, respectively. To eliminate the lignin content, different pretreatment conditions, such as hot water, dilute acid, and acid-alkali, were designed. Acid-alkali was characterized as the best pretreatment for removing ∼79 and 70% of lignin, α-cellulose increased 91.4 and 91%, and holocellulose reached 90.8 and 90% for RS and SCB, respectively. The results revealed that acid-alkali was highly efficient than other pretreatment used for both RS and SCB. After enzymatic hydrolysis of acid-alkali-treated RS and SCB with cellulase, glucose concentrations reached 45 and 42 g/l, respectively. Pichia occidentalis AS.2 was isolated and identified based on 18S rRNA sequencing as a bioethanol producer. Maximization of bioethanol production by P. occidentalis AS.2 using the resulting glucose as a carbon source from RS and SCB was studied using an experimental design. The pH, incubation period, and inoculum size were optimized using Box-Behnken designs (BBD), the final conditions for bioethanol production used 100 g/l acid-alkali-treated fibers, 10 ml cellulase enzyme at 50°C for 5 days at 75 rpm for enzymatic hydrolysis. After time consumed and adjusting the pH to 6, the mixture was inoculated with 2.5% P. occidentalis AS.2 and incubated at 35°C for 24 h at 200 rpm to increase the bioethanol yield by 1.39-fold to 23.7 and 21.4 g/l compared to initial production (17 and 15.3 g/l) between RS and SCB, respectively. [ABSTRACT FROM AUTHOR]

Bacterial cellulose (BC), a promising polysaccharide of microbial origin, is usually produced through synthetic (chemically defined) or natural media comprising of various environmental wastes (with exact composition unknown), through low-cost and readily available means. Various agricultural, industrial, and food processing wastes have been explored for sustainable BC production. Both conventional (using one variable at a time) and statistical approaches have been used for BC optimization, either during the static fermentation to obtain BC membranes (pellicle) or agitated fermentation that yields suspended fibers (pellets). Multiple studies have addressed BC production, however, the strategies applied in utilizing various wastes for BC production have not been fully covered. The present study reviews the nutritional requirements for maximal BC production including different optimization strategies for the cultivation conditions. Furthermore, commonly-used applications of BC, in various fields, including recent developments, and our current understanding have also been summarized. [ABSTRACT FROM AUTHOR]

New cationic derivatives of starch are attractive targets for biomedical applications due to their propensity for electrostatically binding with anionic biomolecules, such as nucleic acids and certain proteins. In the first step, 1‐Butyl‐3‐methylimidazolium chloride [BMIM]Cl is used as a solvent to prepare tosyl starch from starch and tosyl chloride. The reaction between 1‐methylimidazole and tosyl starch produced cationic starch salt. Starch derivatives are characterized using elemental analysis, FT‐IR spectroscopy, 13C NMR, 1H NMR, and SEM analysis. The cationic starch derivative has an antimicrobial effect on all organisms tested and the minimal inhibitory concentration (MIC) recorded different values depending on what species is tested. The prepared cationic starch bearing substantial permanent positive charge exhibited high water solubility and can bind strongly with anionic surface, supporting their potential for a variety of applications such as antimicrobial surfaces. The cationic starch derivatives may be promising candidates for biomedical applications. [ABSTRACT FROM AUTHOR]

Novel and sustainable chitosan (CS)/activated charcoal (AC) composites were prepared by cross-linking with epichlorohydrin (ECH) to form a porous structure. Different titanium dioxide nanoparticle (TiO2 NPs) concentrations (0, 0.2, 0.4, and 0.8% w/w) were added to enhance the photocatalytic, antibacterial, larvicidal, and pupicidal activities' efficiency toward Rose Bengal (RB) dye and the Culex pipiens. The composites were characterized by FT-IR, XRD, XPS, BET and SEM. The SEM images revealed the porous structure of CS/AC and TiO2 nanoparticles were uniformly distributed in the CS/AC matrix. The degradation of RB dye was used to test the photocatalytic behavior of the composites. Supporting TiO2 on a CS/AC matrix resulted in a significant increase in photocatalytic performance. The antibacterial activities supported by CS/AC/TiO2 NPs were evaluated by bacterial growth inhibition against B. subtilis, S. aureus, E. coli, and P. aeruginosa. The results showed that CS/AC/TiO2 NPs composite has an inhibitory effect and therefore considered antibacterial agents. CS/AC/0.4%TiO2 NPs showed maximum efficacy against larvicidal activity and pupicidal of mosquito vector which recorded 99.00 ± 1.14, 95.00 ± 1.43, and 92.20 ± 2.64 for the first, second, and third larval instars and 66.00 ± 2.39 for pupal mortality, while the repellent activity reported high protection at 82.95 ± 2.99 with 3.24 mg/cm2 dose compared to control DEET. [ABSTRACT FROM AUTHOR]

A novel nanocomposite films of native and modified starch/polyvinyl alcohol (PVA)/sorbitol/cardanol oil with in situ synthesis of silver nanoparticles were prepared. The surface morphology of modified starch was found to be more homogenous than native starch with a good distribution of silver nanoparticles. This result indicated to boost in plasticization after starch modification as observed by scanning electron microscope. Transmission electron microscope confirms the formation of silver nanoparticles with diameters ranging from 50 to 80 nm with homogenously distributed. Moreover, modified starch showed lower water vapor permeability compared to unmodified starch at 39%. The addition of cardanol oil at 0.2% showed significant increases in the elongation of modified starch films by 280.9% compared to the unmodified starch films. However, the film elongation was increased by 421.7% with 2 mmol silver nanoparticles and 0.2% cardanol oil, while it decreased by 14.2 in the modified starch film. Also, cardanol oil reduces transmittance in the UV region for native and modified starch films by 56.2% and 56.5%, respectively. The nanocomposite films demonstrated good antimicrobial activity against gram‐positive and gram‐negative bacteria and yeast. These films can be a potential candidate for application such as food packaging materials. [ABSTRACT FROM AUTHOR]

Enzymes have played a crucial role in mankind's challenges to use different types of biological systems for a diversity of applications. They are proteins that break down and convert complicated compounds to produce simple products. Fungal enzymes are compatible, efficient, and proper products for many uses in medicinal requests, industrial processing, bioremediation purposes, and agricultural applications. Fungal enzymes have appropriate stability to give manufactured products suitable shelf life, affordable cost, and approved demands. Fungal enzymes have been used from ancient times to today in many industries, including baking, brewing, cheese making, antibiotics production, and commodities manufacturing, such as linen and leather. Furthermore, they also are used in other fields such as paper production, detergent, the textile industry, and in drinks and food technology in products manufacturing ranging from tea and coffee to fruit juice and wine. Recently, fungi have been used for the production of more than 50% of the needed enzymes. Fungi can produce different types of enzymes extracellularly, which gives a great chance for producing in large amounts with low cost and easy viability in purified forms using simple purification methods. In the present review, a comprehensive trial has been advanced to elaborate on the different types and structures of fungal enzymes as well as the current status of the uses of fungal enzymes in various applications. [ABSTRACT FROM AUTHOR]

College students without ADHD may feign symptoms of ADHD to gain access to stimulant medications and academic accommodations. Unfortunately, research has shown that it can be difficult to discriminate malingered from genuine ADHD symptomatology, especially when evaluations are based only on self-report questionnaires. The present study investigated whether nonclinical college students given no additional information could feign ADHD as successfully as those who were coached on symptoms of the disorder. Similar to Jasinski et al. (2011) and other research on feigned ADHD, a battery of neuropsychological, performance validity, and self-report tests was administered. Undergraduates with no history of ADHD or other psychiatric disorders were randomly assigned to 1 of 2 simulator groups: a coached group that was given information about ADHD symptoms, or a noncoached group that was given no such information. Both simulator groups were asked to feign ADHD. Their performance was compared to a genuine ADHD group and a nonclinical group asked to respond honestly. Self-report, neuropsychological, and performance validity test data are discussed in the context of the effect of coaching and its implications for ADHD evaluations. Symptom coaching did not have a significant effect on feigning success. Performance validity tests were moderately effective at detecting feigned ADHD. (PsycINFO Database Record [ABSTRACT FROM AUTHOR]