Search

Shape‐memory elastomer composite (SMEC) sheets, made of a honeycomb structured electrospun poly(ε‐caprolactone) (PCL) fiber mat embedded in a silicone (PDMS) elastomer, fold on themselves upon uniaxial traction. The self‐folding of the composite sheet originates from a bi‐layered structure obtained by a simple one‐step impregnation process. Indeed, the impregnation of a structured PCL fiber mat by oily PDMS in a flat Teflon mold leads, after curing, to an asymmetric composite sheet made of one PDMS flat thin layer on the mold side and one rough PDMS/PCL composite layer on the other side due to specific affinities between the three polymers involved. The self‐folded shape of such structured single sheet obtained upon uniaxial stretching and stress release is controlled by the honeycomb pattern orientation versus stretching direction, by the pattern size and by the applied uniaxial stretching stress. High shape recovery and robust shape memory cycling are also demonstrated by dynamic mechanical analysis. This innovative process based on the mat structuration allows a straightforward one‐step fabrication of shape memory sheets, with a wide scope of tunable self‐folded curvatures exhibiting efficient temperature shape recovery. [ABSTRACT FROM AUTHOR]

Introduction: We hypothesised that the active targeting of αvβ3 integrin overexpressed in neoangiogenic blood vessels and glioblastoma (GBM) cells combined with magnetic targeting of paclitaxel- and SPIO-loaded PLGA-based nanoparticles could improve accumulation of nanoparticles in the tumour and therefore improve the treatment of GBM. Methods: PTX/SPIO PLGA nanoparticles with or without RGD-grafting were characterised. Their in vitro cellular uptake and cytotoxicity was evaluated by fluorospectroscopy and MTT assay. In vivo safety and anti-tumour efficacy of different targeting strategies were evaluated in orthotopic U87MG tumour model over multiple intravenous injections. Results: The nanoparticles of 250 nm were negatively charged. RGD targeted nanoparticles showed a specific and higher cellular uptake than untargeted nanoparticles by activated U87MG and HUVEC cells. In vitro IC50 of PTX after 48 h was ∼1 ng/mL for all the PTX-loaded nanoparticles. The median survival time of the mice treated with magnetic targeted nanoparticles was higher than the control (saline) mice or mice treated with other evaluated strategies. The 6 doses of PTX did not induce any detectable toxic effects on liver, kidney and heart when compared to Taxol. Conclusion: The magnetic targeting strategy resulted in a better therapeutic effect than the other targeting strategies (passive, active). [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Sulindac loaded poly(HEMA) cross-linked microparticles were synthesized via one-pot free-radical dispersion polymerisation in supercritical carbon dioxide (scCO 2 ) in presence of photocleavable diblock stabilisers based on polyethylene oxide (PEO) and poly(heptadecafluorodecyl acrylate) (PFDA) bearing a o-nitrobenzyl photosensitive junction ( hv ) (PEO- hv -PFDA), and ethylene glycol dimethacrylate (EGDMA) as cross-linker. Poly(HEMA) cross-linked microparticles either empty or sulindac loaded were obtained with well-defined spherical morphology with the sizes between 250 and 350 nm. Additionally, upon UV-photolysis the stabiliser on the surface was cleaved which permits to microparticles to be redispersed in water leading to water swollen microgels about 2.1–3.6 µm. Moreover, the release behaviour from obtained microgels indicated the sustained release of sulindac over 10 days. Besides, the surface modification after UV-photolysis was studied and proved that the particles can be functionalised with further chemistries. [ABSTRACT FROM AUTHOR]

A chemically cross-linked but remarkably (re)processable shape-memory polymer (SMP) is designed by cross-linking poly(ε-caprolactone) (PCL) stars via the efficient triazolinedione click chemistry, based on the very fast and reversible Alder-ene reaction of 1,2,4-triazoline-3,5-dione (TAD) with indole compounds. Typically, a six-arm star-shaped PCL functionalized by indole moieties at the chain ends is melt-blended with a bisfunctional TAD, directly resulting in a cross-linked PCL-based SMP without the need of post-curing treatment. As demonstrated by the stress relaxation measurement, the labile character of the TAD-indole adducts under stress allows for the solid-state plasticity reprocessing of the permanent shape at will by compression molding of the raw cross-linked material, while keeping excellent shape-memory properties. [ABSTRACT FROM AUTHOR]

In previous works, poly(D,L-lactide-co-εCL-poly(ethylene glycol) (poly(D,L-La-co-αPEGεCL) amphiphilic graftcopolymers were successfully synthesized according to a copper azide-alkyne cycloaddition (CuAAC) strategy. This paper aims at reporting on the behavior of this amphiphilic copolymer in water, which was not studied in the previous paper. Moreover, the ability of the copolymer to stabilize a PLA nanoparticles aqueous suspension is presented. For this purpose, dynamic light scattering (DLS) and transmission electron microscopy (TEM) are proposed to characterize the nanoparticles in solution. Otherwise, the strategy developed for the synthesis of the amphiphilic copolymers was adapted and extended to the synthesis of PLA-based degradable hydrogel, potentially applicable as drug-loaded degradable polymer implant. [ABSTRACT FROM AUTHOR]

This article reports on the synthesis of a new pH-sensitive amphiphilic A2B mikto-arm star-shaped aliphatic copolyester [with A = poly(ε-caprolactone) and B = tertiary amine-bearing poly(ε-caprolactone)] with two hydrophobic arms and one hydrophilic arm when protonated at pH = 5.5. First, the ring-opening polymerization of ε-caprolactone (εCL) was initiated by an aliphatic diol substituted by an alkyne. The copper(I) catalyzed azide-alkyne cycloaddition (CuAAC) was use to convert the alkyne into a hydroxyl group prone to initiate the ring-opening copolymerization of γ-bromo-ε-caprolactone (γBrεCL) and εCL. After the substitution of the bromide atoms into azide functions, the N,N-dimethylprop-2-yn-1-amine was grafted onto the azide bearing PCL arm by CuAAC, with the purpose to make the B arm hydrophilic at low pH. The precursors of the A2B copolymers were characterized by 1H NMR, SEC, and MALDI-TOF. As expected, the A2B copolyester was soluble into water at pH = 5. The formation of polymersomes in water at pH 5 was assessed by DLS and TEM analyses. The effects of the architecture and the molecular weight of the A2B copolymers on the formation of polymersomes were investigated. Moreover, the versatility of our approach was demonstrated by the synthesis of an AB2 star-shaped copolyester. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 [ABSTRACT FROM AUTHOR]

Poly(ethylene glycol)-b-polyphosphoester (PEG-b-PPE) block copolymer nanoparticles are promising carriers for poorly water soluble drugs. To enhance the drug loading capacity and efficiency of such micelles, a strategy was investigated for increasing the lipophilicity of the PPE block of these PEG-b-PPE amphiphilic copolymers. A PEG-b-PPE copolymer bearing pendant vinyl groups along the PPE block was synthesized and then modified by thiol-ene click reaction with thiols bearing either a long linear alkyl chain (dodecyl) or a tocopherol moiety. Ketoconazole was used as model for hydrophobic drugs. Comparison of the drug loading with PEG-b-PPE bearing shorter pendant groups is reported evidencing the key role of the structure of the pendant group on the PPE backbone. Finally, a first evidence of the biocompatibility of these novel PEG-b-PPE copolymers was achieved by performing cytotoxicity tests. The PEG-b-PPE derived by tocopherol was evidenced as particularly promising as delivery system of poorly water-soluble drugs. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Antimicrobial peptide loaded poly(2-hydroxyethyl methacrylate) particles were synthesized in supercritical carbon dioxide via one-pot free-radical dispersion polymerisation of 2-hydroxyethyl methacrylate and a cross-linker. Discrete particles with a well-defined spherical morphology and a diameter as low as 450 nm have been obtained in mild conditions. The encapsulation and release of the peptide were confirmed by antimicrobial tests that demonstrated for the first time a sustained release of the peptide from poly(2-hydroxyethyl methacrylate) microgels prepared by one-pot dispersion polymerization in supercritical carbon dioxide and then dispersed in water. [ABSTRACT FROM AUTHOR]