Search

A transparent, conductive, smooth, and temperature sensitive thin films was fabricated and characterized in this paper. Silk fibroin could be processed into transparent thin films, which can act as ideal opto-electronic substrates. As pure silk fibroin film is nonconductive, ultra-long silver nanowires coating and platinum sputtering were used to strengthen its conductivity. Ultra-long nanowires were used to reduce the junctions between wires, and platinum was to improve the conductivity of the film. The new nanowire-metal-organic composite film possesses excellent conductivity and good transmittance. The composite films containing different silver nanowires exhibit conductivities of as low as 6.9 Ω/sq, and transmittance of 60–80% in the visible light range. The films also showed potentials in practical applications as their resistance is almost linearly temperature-dependent. It also can transfer power to electrical devices. The new composite films could be expected to function in wearable electronics or implantable devices and sensors. [ABSTRACT FROM AUTHOR]

ZnO nanomaterials have been widely used in micro/nano devices and structure due to special mechanical/electrical properties, and its characterization is still deficient and challenging. In this paper, ZnO nanomaterials, including nanorod and nanowire are characterized by atomic force microscope (AFM) and nanomanipulator embedded in scanning electron microscope (SEM) respectively, which can manipulate and observe simultaneously, and is efficient and cost effective. Surface morphology and mechanical properties were observed by AFM. Results showed that the average Young's modulus of ZnO nanorods is 1.40 MPa and the average spring rate is 0.08 N/m. Electrical properties were characterized with nanomanipulator, which showed that the ZnO nanomaterial have cut-off characteristics and good schottky contact with the tungsten probes. A two-probe strategy was proposed for piezoelectric property measurement, which is easy to operate and adaptable to multiple nanomaterials. Experiments showed maximum voltage of a single ZnO nanowire is around 0.74 mV. Experiment criteria for ZnO manipulation and characterization were also studied, such as acceleration voltage, operation duration, sample preparation. Our work provides useful references for nanomaterial characterization and also theoretical basis for nanomaterials application. [ABSTRACT FROM AUTHOR]

A portable capacitive sensor was designed to assess frying oil degradation by measuring the changes in electrical capacitance. An interdigital electrode (IDE) was designed to be implemented as the testing probe (as IDEs are resistive to parasitic capacitance), together with an adjacent capacitive chip Pcap01 and a further microprocessor STM32, which were used as the data-processing elements. Experimental results demonstrated that viscosity could be a useful frying oil quality indicator, and also proved a preliminary correlation between IDE capacitance and oils' total polar materials. This implies that IDE capacitance could be a suitable metric for conveniently assessing frying oil degradation. The designed capacitance sensor is light in weight, cost effective, and has excellent potential for simple, inexpensive, on-the-spot testing of the current quality of frying oil. [ABSTRACT FROM AUTHOR]

Micro/nano-manipulation is the fabrication of particular constructs on devices at the micro/nano-scale. Precise manipulation of microparticles is one of the key technological difficulties in manufacturing micro/nano-scale components. Based on scanning electron microscopy and nanomanipulator, this paper adopts a direct push method to operate randomly distributed microparticles into ordered structures. A two-probe interaction strategy is proposed to enable microparticle movements in all directions efficiently and avoid scratching the substrate surface. To overcome the uncertainties in micromanipulation, a virtual nano-hand strategy was also implemented: long-range advance of each microparticle is realized by multiple single-step pushes, whose trajectory is theoretically analyzed. The pushes are well programmed to imitate effects of a more powerful and determined hand. Experimental results show that the theoretical single-step motion trajectory is in line with actual operation, and the proposed strategy can ensure precise operation of the microparticles in all directions and improve reliability and effectiveness of operation. [ABSTRACT FROM AUTHOR]

Pediatric acute myeloid leukemia (AML) is a complex and heterogeneous disease. Several studies have shown the regulatory functions of microRNAs (miRNAs) in pediatric AML progression, and in this study, we aimed to evaluate the biological role of miR-206 in pediatric AML. The results demonstrated that miR-206 expression levels in the bone marrow and serum of pediatric AML patients were remarkably decreased than those in normal controls, and low serum miR-206 expression was closely associated with the unfavorable clinicopathological characteristics and prognosis of pediatric AML patients. In addition, in vitro functional experiments revealed that overexpression of miR-206 significantly inhibited AML cell proliferation partly through induction of cell cycle arrest. Further studies showed that Cyclin D1 might be a direct target of miR-206 in AML cells, and the impaired proliferation ability of miR-206-overexpressing AML cells was notably rescued by Cyclin D1 restoration. Accordingly, the findings of our study suggested that miR-206 might serve as a promising prognostic marker and a potential therapy target for patients with pediatric AML. [ABSTRACT FROM AUTHOR]