Search

Abstract Here we describe the data obtained by a successful proof-of-concept initiative to launch the first ocean color imager on board a CubeSat satellite and collect research-grade imagery at severalfold higher spatial resolution than any other ocean color satellite mission. The 3U CubeSat, named SeaHawk, flew at a nominal altitude of 585 km. Its ocean color sensor, HawkEye, collected 7,471 research-grade push-broom images of 230 × 780 km2 at best-in-class 130 × 130 m2 per pixel. The sensor is built with comparatively low-cost commercial off-the-shelf optoelectronics and was designed to match NASA SeaWiFS ocean color specifications, including wavelengths, bandwidths, and signal-to-noise ratios. HawkEye’s design for ocean color remote sensing combined with its high spatial resolution make the imagery especially well-suited for coastal, estuarine, and limnological applications. Ultimately, the successful mission provided open access to a rich global dataset of calibrated and quality-controlled imagery for use in aquatic ecology and environmental change studies.

The role of phytoplankton as ocean primary producers and their influence on global biogeochemical cycles makes them arguably the most important living organisms in the sea. Like plants on land, phytoplankton exhibit seasonal cycles that are controlled by physical, chemical, and biological processes. Nearshore coastal waters often contain the highest levels of phytoplankton biomass. Yet, owing to difficulties in sampling this dynamic region, less is known about the seasonality of phytoplankton in the nearshore (e.g., surf zone) compared to offshore coastal, shelf and open ocean waters. Here, we analyse an annual dataset of chlorophyll-a concentration—a proxy of phytoplankton biomass—and sea surface temperature (SST) collected by a surfer at Bovisand Beach in Plymouth, UK on a near weekly basis between September 2017 and September 2018. By comparing this dataset with a complementary in-situ dataset collected 7 km offshore from the coastline (11 km from Bovisand Beach) at Station L4 of the Western Channel Observatory, and guided by satellite observations of light availability, we investigated differences in phytoplankton seasonal cycles between nearshore and offshore coastal waters. Whereas similarities in phytoplankton biomass were observed in autumn, winter and spring, we observed significant differences between sites during the summer months of July and August. Offshore (Station L4) chlorophyll-a concentrations dropped dramatically, whereas chlorophyll-a concentrations in the nearshore (Bovsiand Beach) remained high. We found chlorophyll-a in the nearshore to be significantly positively correlated with SST and PAR over the seasonal cycle, but no significant correlations were observed at the offshore location. However, offshore correlation coefficients were found to be more consistent with those observed in the nearshore when summer data (June–August 2018) were removed. Analysis of physical (temperature and density) and chemical variables (nutrients) suggest that the offshore site (Station L4) becomes stratified and nutrient limited at the surface during the summer, in contrast to the nearshore. However, we acknowledge that additional experiments are needed to verify this hypothesis. Considering predicted changes in ocean stratification, our findings may help understand how the spatial distribution of phytoplankton phenology within temperate coastal seas could be impacted by climate change. Additionally, this study emphasises the potential for using marine citizen science as a platform for acquiring environmental data in otherwise challenging regions of the ocean, for understanding ecological indicators such as phytoplankton abundance and phenology. We discuss the limitations of our study and future work needed to explore nearshore phytoplankton dynamics.

Ocean acidification, the decrease in seawater pH as a result of increasing carbon dioxide, has been shown to be an important driver of oyster mortality in West Coast shellfisheries [1]. Yet carbon chemistry is only sparsely measured, especially relative to its high variability in coastal ecosystems, due to the complexity and cost of appropriate sensors and their maintenance. Worse, data are rarely communicated in real time to water quality or aquacultural managers. In the Agua Hedionda Lagoon (AHL) in Carlsbad, CA, researchers from Scripps Institution of Oceanography and industry representatives from the Carlsbad Aquafarm have come together through a NOAA-facilitated project to alleviate this data shortage using a combination of cutting-edge research technology alongside off-the-shelf and easy-to-implement IoT communications packages. Keywords: Water quality, Internet of things, Ocean acidification, Aquaculture

Background: Pediatric flatfoot is a common deformity. Unfortunately, the common opinion has been that most children with this faulty foot structure will simply out-grow it, despite no radiographic evidence to support this claim. Every step on a deformed foot leads to excessive tissue strain and further joint damage. Many forms of conservative and surgical treatments have been offered. This study was aimed at investigating the effectiveness of non-surgical and surgical treatment options.Main Text: faulty-foot structure is the leading cause of many secondary orthopedic deformities. A wide range of treatments for pediatric flatfeet have been recommended from the “do-nothing” approach, observation, to irreversible reconstructive surgery. Most forms of conservative care lack evidence of osseous realignment and stability. A conservative surgical option of extra-osseous talotarsal joint stabilization provides patients an effective form of treatment without the complications associated with other irreversible surgical procedures.Conclusion: Pediatric flatfeet should not be ignored or downplayed. The sooner effective treatment is prescribed, the less damage will occur to other parts of the body. When possible, a more conservative corrective procedure should be performed prior to irreversible, joint destructive options.

The accuracy and precision of satellite sea surface temperature (SST) products in nearshore coastal waters are not well known, owing to a lack of in-situ data available for validation. It has been suggested that recreational watersports enthusiasts, who immerse themselves in nearshore coastal waters, be used as a platform to improve sampling and fill this gap. One tool that has been used worldwide by surfers is the Smartfin, which contains a temperature sensor integrated into a surfboard fin. If tools such as the Smartfin are to be considered for satellite validation work, they must be carefully evaluated against state-of-the-art techniques to quantify data quality. In this study, we developed a Simple Oceanographic floating Device (SOD), designed to float on the ocean surface, and deployed it during the 28th Atlantic Meridional Transect (AMT28) research cruise (September and October 2018). We attached a Smartfin to the underside of the SOD, which measured temperature at a depth of ∼0.1 m, in a manner consistent with how it collects data on a surfboard. Additional temperature sensors (an iButton and a TidbiT v2), shaded and positioned a depth of ∼1 m, were also attached to the SOD at some of the stations. Four laboratory comparisons of the SOD sensors (Smartfin, iButton and TidbiT v2) with an accurate temperature probe (±0.0043 K over a range of 273.15 to 323.15 K) were also conducted during the AMT28 voyage, over a temperature range of 290–309 K in a recirculating water bath. Mean differences (δ), referenced to the temperature probe, were removed from the iButton (δ=0.292 K) and a TidbiT v2 sensors (δ=0.089 K), but not from the Smartfin, as it was found to be in excellent agreement with the temperature probe (δ=0.005 K). The SOD was deployed for 20 min periods at 62 stations (predawn and noon) spanning 100 degrees latitude and a gradient in SST of 19 K. Simultaneous measurements of skin SST were collected using an Infrared Sea surface temperature Autonomous Radiometer (ISAR), a state-of-the-art instrument used for satellite validation. Additionally, we extracted simultaneous SST measurements, collected at slightly different depths, from an underway conductivity, temperature and depth (CTD) system. Over all 62 stations, the mean difference (δ) and mean absolute difference (ϵ) between Smartfin and the underway CTD were −0.01 and 0.06 K respectively (similar results obtained from comparisons between Smartfin and iButton and Smartfin and TidbiT v2), and the δ and ϵ between Smartfin and ISAR were 0.09 and 0.12 K respectively. In both comparisons, statistics varied between noon and predawn stations, with differences related to environmental variability (wind speed and sea-air temperature differences) and depth of sampling. Our results add confidence to the use of Smartfin as a citizen science tool for evaluating satellite SST data, and data collected using the SOD and ISAR were shown to be useful for quantifying near-surface temperature gradients.

Accurate observations of the Earth system are required to understand how our planet is changing and to help manage its resources. The aquatic environment—including lakes, rivers, wetlands, estuaries, coastal and open oceans—is a fundamental component of the Earth system controlling key physical, biological, and chemical processes that allow life to flourish. Yet, this environment is critically undersampled in both time and space. New and cost-effective sampling solutions are urgently needed. Here, we highlight the potential to improve aquatic sampling by tapping into recreation. We draw attention to the vast number of participants that engage in aquatic recreational activities and argue, based on current technological developments and recent research, that the time is right to employ recreational citizens to improve large-scale aquatic sampling efforts. We discuss the challenges that need to be addressed for this strategy to be successful (e.g., sensor integration, data quality, and citizen motivation), the steps needed to realize its potential, and additional societal benefits that arise when engaging citizens in scientific sampling.

Research assessing the biological impacts of global ocean change often requires a burdensome characterization of seawater carbonate chemistry. For laboratory-based ocean acidification research, this impedes the scope of experimental design. Honeywell Durafet® III pH electrodes provide precise and continuous seawater pH measurements. In addition to use in oceanographic sensor packages, Durafets can also be used in the laboratory to track and control seawater treatments via Honeywell Universal Dual Analyzers (UDAs). Here we provide performance data, instructions, and step-by-step recommendations for use of multiple UDA-Durafets. Durafet pH measurements were within ±0.005 units pHT of spectrophotometric measurements and agreement among eight Durafets was better than ±0.005 units pHT. These results indicate equal performance to Durafets in oceanographic sensor packages, but methods for calibration and quality control differ. Use of UDA-Durafets vastly improves time-course documentation of experimental conditions and reduces person-hours dedicated to this activity. Due to the versatility of integrating Durafets in laboratory seawater systems, this technology opens the door to advance the scale of questions that the ocean acidification research community aims to address.