Search

The signal level and shape of induced polarization responses are significantly affected by the current pulse duration and waveform. If not accounted for, this data dependency on the current will propagate trough the inversion to results rendering unquantifiable subsurface models. While this problem has been addressed in full-response induced polarization modelling, questions remain as to how to accurately retrieve quantitative induced polarization inversion models from the types of apparent integral chargeability data often used in data interpretation. Although several methodologies have been proposed for handling and inverting apparent resistivity and integral chargeability, these cannot compensate for the data dependency on the current waveform and pulse duration. This paper presents a novel inversion method for such data. The method considers current waveform and receiver transfer functions for retrieving quantitative IP models unbiased by transmitter waveform. The method uses the constant phase angle model, expressed in terms of the medium resistivity and phase. Specifically, four field data sets for the same profile but with different 100 per cent duty cycle pulse durations (4, 2, 1 and 0.5 s) serve as examples of data sets giving models dependant on current waveform when inverted with standard approaches. The novel inversion method presented here gives quantifiable models independent on the current waveform and pulse duration. These results resemble models retrieved with existing, full-response induced polarization inversions. The results still contain some degree of uncertainty in relation to underlying assumptions and parametrizations. Managing this source of uncertainty is considered in terms of full-response induced polarization inversions with constant phase angle and maximum phase angle inversions.

There is an increasing demand for trustworthy engineering geological conceptual models in urban areas due to an increasing trend in the underground infrastructure construction. Good-quality site investigations can reduce the risk of encountering unexpected geological conditions during construction. Geoelectrical measurements can be used as a tool for providing an overview of the site conditions and serve as a base for planning a geotechnical drilling program and for integration of the results. Geophysical surveys in urban environments may encounter problems due to strict logistical constraints and may be severely affected by electric and electromagnetic noise. Careful processing of the data is necessary to obtain a reliable estimation of the electrical properties of the ground, both electrical resistivity and chargeability. A large three-dimensional dataset was acquired in the suburban area of Stockholm (Sweden), with the aim of investigating a weak zone in the crystalline bedrock, which had been pointed out by prior geological and geotechnical surveys. Full waveforms of potential dipoles were recorded and processed for removing harmonic noise and background drift. Moreover, a statistical algorithm for handling the quality of the full-waveform shapes has been proposed. The goodness-of-fit test identifies full waveforms with noise that derives from direct current injections, caused by grounding spots of the adjacent metro line. The processed dataset is inverted for electrical resistivity and integral chargeability. The results image a large three-dimensional volume of the underground. The inverted distribution of geophysical quantities marks out the presence of a wide zone of weak rock, which was not identified by geotechnical probing in the site investigation but documented during the construction phase. Such zones can potentially cause severe problems during the construction of underground infrastructure.

The extraction of spectral information in the inversion process of time-domain (TD) induced polarization (IP) data is changing the use of the TDIP method. Data interpretation is evolving from a qualitative description of the subsurface, able only to discriminate the presence of contrasts in chargeability parameters, towards a quantitative analysis of the investigated media, which allows for detailed soil- and rock-type characterization. Two major limitations restrict the extraction of the spectral information of TDIP data in the field: i) the difficulty of acquiring reliable early-time measurements, in the millisecond range and ii) the self-potential drift in the measured potentials distorting the shape of the late time IP responses, in the second range. Recent developments in TDIP acquisition equipment have given access to full waveform recordings of measured potentials and transmitted current, opening a breakthrough for data processing. For measuring at early times, we developed a new method for removing the significant noise from powerlines contained in the data through a model-based approach, localizing the fundamental frequency of the powerline signal in the full-waveform IP recordings. By this, we cancel both the fundamental signal and its harmonics. Furthermore, a novel and efficient processing scheme for identifying and removing spikes TDIP data is developed. The noise cancellation and the de-spiking allow the use of earlier and narrower gates, down to a few milliseconds after the current turn-off. Furthermore, tapered windows are used in the final gating of IP data, allowing the use of wider and overlapping gates for higher noise suppression without signal distortion. For measuring at late times, we have developed an algorithm for removal of the self-potential drift. Usually constant or linear drift-removal algorithms are used, but these algorithms fail in removing the background potentials due to the polarization of the electrodes previously used for current injection. We developed a drift-removal scheme that model the polarization effect and efficiently allows for preserving the shape of the IP responses at late times. Uncertainty estimates are essential in the inversion of IP data. Therefore, in the final step of the data processing, we estimate the data standard deviation based on the data variability within the IP gates and the misfit of the background drift removal Overall, the removal of harmonic noise, spikes, self-potential drift, tapered windowing and the uncertainty estimation allows for doubling the usable range of TDIP data to almost four decades in time (corresponding to four responses in frequency), and will significantly advance the science and the applicability of the IP method. (Less)

Combined resistivity and time-domain direct current induced polarization (DCIP) measurements are traditionally carried out with a 50\% duty cycle current waveform, taking the resistivity measurements during the on-time and the IP measurements during the off-time. One drawback with this method is that only half of the acquisition time is available for resistivity and IP measurements, respectively. In this paper, this limitation is solved by using a current injection with 100\% duty cycle and also taking the IP measurements in the on-time. With numerical modelling of current waveforms with 50\% and 100\% duty cycles we show that the waveforms have comparable sensitivity for the spectral Cole–Cole parameters and that signal level is increased up to a factor of 2 if the 100\% duty cycle waveform is used. The inversion of field data acquired with both waveforms confirms the modelling results and shows that it is possible to retrieve similar inversion models with either of the waveforms when inverting for the spectral Cole–Cole parameters with the waveform of the injected current included in the forward computations. Consequently, our results show that on-time measurements of IP can reduce the acquisition time by up to 50\% and increase the signal-to-noise ratio by up to 100\% almost without information loss. Our findings can contribute and have a large impact for DCIP surveys in general and especially for surveys where time and reliable data quality are important factors. Specifically, the findings are of value for DCIP surveys conducted in urban areas where anthropogenic noise is an issue and the heterogeneous subsurface demands time-consuming 3D acquisitions. (Less)