Search

The international community has approved the 2030 Agenda for Sustainable Development as a common roadmap to face the global challenges of poverty, inequity and the sustainable management of the planet’s natural resources. For this Agenda to succeed, all countries must adopt the Policy Coherence for Development (PCD) approach as the guiding and crosscutting principle of all domestic and foreign policies during the next 15 years. National parliaments are going to be key players to urge Governments to make the ambitious and long-term commitments that the 2030 Agenda requires. Proyecto Avizor —a Spanish Parliament Monitoring Organization (PMO)— has monitored the activity of the Spanish Parliament during the 2011-2016 period, analyzing the contribution that the parliamentarian activity has had to promote the Government’s commitment in the fight against global poverty, inequality and in favor of sustainable development and human rights. With the information provided by Proyecto Avizor, this article has aimed to find if, in the current Spanish political context, the political initiatives that will be needed to fulfill the 2030 Agenda’s goals, face extra obstacles and burdens during their approval procedures compared withthe rest of initiatives. The results of the analysis show that the inclusion of the PCD approach in a political initiative decreases its chances of being successfully processed at the Parliament. On the other hand, the analysis has found no evidences that a stronger presence of the PCD approach in the political mandates approved by theParliament hampers its chances of being accomplished by the Government.Being solidarity one of the values on which the European Union is founded, the European regional framework becomes the most suitable level to increase the effectiveness of European aid, assuming responsibility for coordination and management of policy coherence.

Copyright of Espacio, Tiempo y Forma: Serie II, Historia Antigua is the property of Editorial UNED and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In sexually reproducing organisms, the specific combinations of parental alleles can have important consequences on offspring viability and fitness. Accordingly, genetic relationship between mates can be used as a criterion for mate choice. Here, we used microsatellite genetic markers to estimate the genetic relationship between mating pairs in the wild boar, Sus scrofa. Males, females and foetuses proceeding from Portugal, Spain and Hungary were genotyped using 14 microsatellite markers. The genetic relationship between mates was estimated using different measures of foetus heterozygosity. We found that the observed heterozygosity of foetuses was lower than that expected under random mating. This result occurred mainly when Sd 2 (relatedness of parental genomes) was used as the heterozygosity measure. After simulations, we concluded that the observed low heterozygosity was possibly due to outbreeding avoidance. Outbreeding avoidance based on genetically different genomes might play an important role in species evolution and its genetic conservation. [ABSTRACT FROM AUTHOR]

The slip velocity and frictional or slip heating of linear-low density polyethylene with a fluoropolymer processing aid in capillary flow were measured by rheo-particle image velocimetry and thermal imaging. The pure polymer did not show slip before the stick-slip regime but exhibited strong slip when blended with the processing additive. However, for shear stresses beyond the stick-slip regime, the pure polymer and the blend exhibited the same flow behavior with slip. The slip velocity increased with the shear stress at two different rates before and after the stick-slip and the contribution of slip to the total flow rate exhibited a minimum. Significant rises in temperature were measured under slip and no slip conditions, being these much higher than the values predicted by the adiabatic flow assumption. Clear difference was made between viscous and frictional heating before the stick-slip regime, even though they could not be distinguished from one another at higher stresses. Overall, in the presence of slip, frictional and viscous heating act synergistically producing higher temperature rises in the melt. Finally, in contrast to predictions by numerical simulations of viscous heating, measured velocity profiles did not evidence the heating effects in the shear stress range analyzed in this work. POLYM. ENG. SCI., 56:837-845, 2016. © 2016 Society of Plastics Engineers [ABSTRACT FROM AUTHOR]

Starch isolated from macho banana was oxidized by using 2.5% and 3.5% (w/w) of sodium hypochlorite. Native and oxidized starches with glycerol were processed using a conical twin screw extruder to obtain thermoplastic laminates or sheets, which were partially characterized. Oxidized banana starches presented higher moisture and total starch but lower ash, protein, lipids, and apparent amylose content than the native starch. Micrographs of sheets from oxidized starches showed wrinkles and cavities presumably caused by the plasticizer, but with less free glycerol and unplasticized starch granules than those from native starch. Sheets from oxidized starch showed a notorious increase in all thermal parameters (To, Tp, and ΔH), mechanical properties (tensile strength, elongation at break, and elasticity), and solubility. Banana starch X-ray diffraction patterns corresponded to a mixture of the A- and B-type polymorphs, with apparently slightly higher crystallinity in oxidized specimens than in native starch. A similar trend was observed in the corresponding sheets. Practical Application: Due to the pollution problem caused by the conventional plastics, there has been a renewed interest in biodegradable sheets, because they may have the potential to replace conventional packaging materials. Banana starch might be an interesting raw material to be used as edible sheet, coating or in food packaging, and preservation, because it is biodegradable, cheap, innocuous, and abundant. [ABSTRACT FROM AUTHOR]

Offspring quality may benefit from genetic dissimilarity between parents. However, genetic dissimilarity may trade-off with additive genetic benefits. We hypothesized that when sexual selection produces sex-specific selective scenarios, the relative benefits of additive genetic vs. dissimilarity may differ for sons and daughters. Here we study a sample of 666 red deer ( Cervus elaphus) microsatellite genotypes, including males, females and their foetuses, from 20 wild populations in Spain (the main analyses are based on 241 different foetuses and 190 mother-foetus pairs). We found that parental lineages were more dissimilar in daughters than in sons. On average, every mother was less related to her mate than to the sample of fathers in the population when producing daughters not sons. Male foetuses conceived early in the rutting season were much more inbred than any other foetuses. These differences maintained through gestation length, ruling out intrauterine mortality as a cause for the results, and indicating that the potential mechanism producing the association between parents’ dissimilarity and offspring sex should operate close to mating or conception time. Our findings highlight the relevance of considering the sex of offspring when studying genetic similarity between parents. [ABSTRACT FROM AUTHOR]

Sex-biased dispersal is a common phenomenon in birds and mammals. Competition for mates has been argued to be an important selective pressure favouring dispersal. Sexual differences in the level of intrasexual competition may produce asymmetries in the costs-benefits balance of dispersal and philopatry for males and females, which may favour male-biased dispersal in polygynous species such as most mammals. This being the case, condition-dependent dispersal predicts that male-bias should decrease if mating competition relaxes. We test this expectation for red deer, where male-biased dispersal is the norm. In southwestern Spain, red deer populations located in nonfenced hunting estates presented altered structures with sex ratio strongly biased to females and high proportion of young males. As a consequence, mate competition in these populations was lower than in other, most typical red deer populations. We found that, under such conditions of altered population structure, dispersal was female-biased rather than male-biased. Additionally, mate competition positively related to male dispersal but negatively to female dispersal. Other factors such as resource competition, age of individuals and sex ratio were not related to male or female dispersal. Males may not disperse if intrasexual competition is low and then females may disperse as a response to male philopatry. We propose hypotheses related to female mate choice to explain female dispersal under male philopatry. The shift of the sex-biased dispersal pattern along the gradient of mate competition highlights its condition-dependence as well as the interaction between male and female dispersal in the evolution of sex-biased dispersal. [ABSTRACT FROM AUTHOR]

Polygyny is expected to erode genetic variability by reducing the diversity of genetic contribution of males to the next generation, although empirical evidence shows that genetic variability in polygynous populations is not lost as rapidly as expected. We used microsatellite markers to study the genetic variability transmitted by mothers and fathers to offspring during a reproductive season in wild populations of a polygynous mammal, the red deer. Contrary to expectations, we found that males contributed more genetic diversity than females. Also, we compared study populations with different degrees of polygyny to find that polygyny was not related to a decrease in genetic diversity contributed by males. On the contrary, when population genetic diversity was relatively low, polygyny associated with higher genetic diversity of paternal lineage. Our results show that sexual selection, by favouring heterozygote individuals, may compensate the potential reduction of effective population size caused by polygyny, thus contributing to explain why genetic diversity is not depleted in polygynous systems. [ABSTRACT FROM AUTHOR]

An efficient transformation system for the fungus Trichoderma longibrachiatum has been developed. Transformation was obtained both by electroporation and polyethyleneglycol treatment, using a plasmid carrying the Escherichia coli hygromycin B phosphotransferase gene as a dominant selectable marker. The transformation frequency was 0.5 to 5 transformants /μg plasmid DNA. Transformation normally occurred by tandem integration of the transforming DNA. A high percentage of the transformants were mitotically unstable. The efficiency of co-transformation was very high (around 90%), and several co-transformants containing multiple copies of the egll gene encoding a β-(1,4)-endoglucanase were obtained. Some of them secrete increased levels of endoglucanase to the culture medium. In addition, the E. coli lacZ gene was expressed in an active form under control of the Aspergillus nidulans gpdA gene promoter. [ABSTRACT FROM AUTHOR]

Polypropylene (PP) nanocomposites with multi-walled carbon nanotubes (MWCNT) alone or combined with carbon nanofibers (CNF) at different loadings have been fabricated by melt mixing with a focus on their mechanical properties and corrosion resistance for bipolar plates applications in proton exchange membrane fuel cells (PEMFCs). The incorporation of up to 20 wt% MWCNT in the PP matrix produces enhancements of 71, 47, 56, and 30% in microhardness, elastic modulus, and tensile and flexural strength, respectively. Combined additions of MWCNT and CNF allow producing hybrid nanocomposites with increased strength than when neat MWCNT as reinforcement, preserving their processability even at a total filler content of up to 30 wt%. The measured values of i corr in both PP/MWCNT and PP/MWCNT/CNF suggest a slow degradation rate in the PEMFC environment. Based on the US Department of Energy (DOE) targets, PP/20MWCNT, PP/21.5MWCNT, and PP/15MWCNT/15CNF nanocomposites are good candidates to produce bipolar plates for PEMFCs. [Display omitted] • PP/MWCNT and PP/MWCNT/CNF blends are evaluated for potential use in bipolar plates. • Hybrid composites reach 45.3 MPa in flexural strength and 0.046 μA cm−2 in i corr. • PP/MWCNT/CNF blends meet most of the targets set by the US DOE for bipolar plates. [ABSTRACT FROM AUTHOR]

A methodology for the determination of clenbuterol in bovine liver by high performance liquid chromatography was developed. Extraction was performed with acetonitrile and isopropanol. The extract was analyzed using a reverse phase column C18, a UV detection at 214 nm, and NaH2PO4 0.05M (pH 3.0)/ acetonitrile (85:15, v/v) as the mobile phase. The retention time for clenbuterol was 24.82 min. The best-fit line of the standard calibration curve was y = 1340.8563x - 1539.7319, and r²=0.9997 (p<0.05). The detection and quantification limits showed values of 0.9 and 1.8 ng/mL, respectively. The mean recovery of clenbuterol were 111.7, 82.0 and 84.8%, for the concentration levels prepared (26.2, 104.9 and 209.8 ng/mL, respectively), which are considered suitable for the proposed method. The method accuracy was measured by the relative standard deviation, which was less than 4.74%. Seventeen liver samples purchased in public markets of México City were analyzed, of which 11 of them had concentrations above the MRL for clenbuterol with a median of 17.68ppb. This method is accurate and reliable due to its limit of detection, chromatographic separation efficiency, precision, accuracy, sensitivity and stability. [ABSTRACT FROM AUTHOR]

Objectives: To analyse the effect of zinc supplementation in growth and nutritional status of a homogeneous group of newborns with intra uterine growth retardation and asymmetric growth. The effect of changes of zinc status on growth and leptin serum concentrations was also analysed. Population and methods: A double blind, randomised clinical trial was designed in order to detect differences in growth between zinc and placebo groups during the first 6 months of life. 31 infants were included either to the zinc group (n = 14) (38.8 ± 1.4 weeks GA, 2,171 ± 253 g body weight) or the placebo group (n = 17) (38.9 ± 1.1 weeks GA, 2,249 ± 220 g body weight). The zinc group received a supplement of 3 mg elemental zinc per day (as zinc sulphate). Results: There were not significant differences between groups for anthropometric measurements through the study period. We found a significant effect of the study group, in hair zinc concentrations, but not in serum zinc concentrations; post-hoc comparisons for hair zinc revealed that there were significant differences between groups at 1, 2, and 6 months of age. Changes in serum and hair zinc concentrations from baseline to 6 months, showed significant correlations with changes in weight/age and length/age z-scores, in the supplement group. Changes in leptin serum concentrations during follow-up, showed significant correlations with changes in sum of 4 skinfolds and weight/age z-score, in the placebo group. Changes in hair zinc concentration through the study period showed significant correlations with changes in leptin serum concentrations from baseline to 6 months of follow-up. Conclusions: In a homogeneous group of intra uterine growth retardation infants with asymmetric growth, 3 mg/day zinc supplementation do not show significant improvements in weight and length growth. Changes in zinc status were related with changes in weight and length during the first 6 months of life. Changes in leptin serum concentrations were related with changes in the anthropometric indices of body fat accretion. [ABSTRACT FROM AUTHOR]