Search

Background: The purpose of this study was to compare complication rates and clinical outcomes at 1 year or until death based on the surgical approach for total hip replacement in femoral neck fractures. Methods: This retrospective study was performed on 101 patients with displaced femoral neck fractures at our institution between 2005 and 2022. All surgeries were performed by fellowship-trained arthroplasty surgeons via either a posterior Kocher-Langenbeck approach, an abductor sparing anterolateral approach, or a direct anterior approach. Demographics were collected, as well as intraoperative characteristics, discharge information, and complications. Results: Thirty-seven patients underwent a direct anterior approach, 42 underwent an abductor sparing anterolateral approach, and 22 underwent a posterior approach, with no significant difference in demographics between the groups. Of patients, 43.3% were able to be discharged home, while 55.4% of patients went to subacute rehab or other nursing home facility. There was a 30.6% complication rate, a 7% reoperation rate, and a 0.9% dislocation rate. The posterior group was more likely to be discharged to rehab instead of home (82.0% compared to 48.6%, P = .0054) and had a significant increase in complication rate (P = .04). There was a 36.3% rate of transfusion in the posterior group compared to a 5.0% rate in the anterior group (P < .0001). Conclusions: Anterior-based total hip arthroplasty for femoral neck fractures in our series demonstrated a significantly lower rate of postoperative complications, a lower rate of transfusion, and a significantly higher rate of being discharged home. Level of Evidence: Level III.

Background: Robotic-assisted total knee arthroplasty (RA-TKA) allows surgeons to perform intraoperative soft tissue laxity assessments prior to bone resections and is used to alter resections to achieve gap balance. This study compared 2 techniques for flexion gap laxity assessment during RA-TKA. Methods: A prospective study of 50 primary RA-TKAs performed by a single surgeon was conducted between February and October 2023. Following full exposure, anterior tibial dislocation, and osteophyte removal, maximal medial and lateral compartment flexion laxity was quantified to the nearest 0.5 mm by the robotic system using a dynamic, surgeon-applied stress (SURGEON). This data was used to plan a balanced flexion gap by adjusting the femoral component size, rotation, and anterior-posterior translation. Flexion laxity was quantified again after distal femoral and proximal tibial resections using a ligament tensor instrument (TENSOR). These new data were used to plan for the same desired flexion gap using the same variables. Paired-samples t-tests and a simple linear regression were used for analysis. Results: Both methods produced near-identical recommendations for femoral component sizing (mean deviation 0.06 sizes, range −1 to +1 size; P = .569), rotation (deviation mean 1.0°, range −3.0° to +3.0°; P = .741), and anterior-posterior translation (deviation mean 0.13 mm, range −0.5 to +0.5 mm, P = .785). SURGEON femoral component rotation predicted TENSOR rotation (R2 = 0.157; 95% confidence interval = 0.124, 0.633; P = .004). Conclusions: Assessing flexion laxity with a surgeon-applied stress vs a ligament tensor produced near-identical laxity data in RA-TKA, suggesting surgeons may comfortably choose either technique as a reliable method. Level of Evidence: Level III.

Background: Under-represented minorities and those with noncommercial insurance have higher medical comorbidities and complications following elective total joint arthroplasty (TJA). In an effort to bridge this gap, our center implemented a preoperative optimization protocol for TJA in a Medicaid Clinic (Clinic). The purpose of this study is to assess the effectiveness of that protocol and highlight challenges associated with caring for this patient population. Methods: This retrospective analysis included 117 patients undergoing TJA between January 2015 and January 2020. In 2015, the protocol was implemented as a mandatory practice prior to TJA. A contemporary control cohort from the private office was also analyzed. Patient demographics, American Society of Anesthesiologists score, and postoperative complications were collected. Results: Within the clinic group, 52.5% (62) patients identified as Hispanic with 46.6% (55) Spanish-speaking as primary language, compared to 9.3% (11) and 8.5% (10) in the office group (P = .0001), respectively. Clinic group patients were significantly more likely to experience a complication compared to office patients (20 vs 7, respectively). There was no difference in complication or reoperation rate between clinic patients who underwent the optimization protocol and those who did not. Conclusions: The findings from this study highlight the demographic and comorbidities profile of an underserved population, and report on results of a quality improvement initiative among that population, which failed to improve postoperative outcomes. These results underscore the need for further study in this population to improve outcomes and health equity.

Background: Spinopelvic immobility has been reported to increase dislocation risk following total hip arthroplasty. Surgically placing acetabular components in a functional orientation has been shown to mitigate risk. The aim of this study was to evaluate the validity and reliability of novel surgical planning software to generate clinically recommended cup targets. Methods: Hip-spine assessments were performed retrospectively on 40 patients. Five reviewers, including 3 arthroplasty-trained surgical fellows and 2 clinical research scientists performed the assessments. Hip-spine assessments consisted of measuring anterior pelvic plane tilt, sacral slope, pelvic incidence, and lumbar lordosis on standing anteroposterior pelvis and lateral standing and seated hip-spine images. Generated cup targets and a control group (40°/20° relative to the anterior pelvic plane) were compared to clinically recommended cup targets. Agreement was defined as a cup position within the recommended range or within 3° of a specific target (eg, 40° inclination) when no range was provided. Intraclass correlation coefficients were used to assess interrater and intrarater reliability, and McNemar’s chi-square test was used to measure success relative to the control group. Results: The intraclass correlation coefficient was 0.88 for delta sacral slope and 0.92 for pelvic incidence-lumbar lordosis mismatch. For patients with spinopelvic risk factors, the generated targets matched the clinical recommendations in 81% of patients compared to only 16% in the control group. Conclusions: Excellent interrater and intrarater reliability was achieved using the novel surgical planning software. The resultant target values agreed with clinical recommendations to a greater extent than the control group.

Background: The choice of anesthesia plays a significant role in the success of total joint arthroplasty (TJA). Isobaric bupivacaine spinal anesthesia is often used. However, dosing of bupivacaine has not been extensively studied and is usually at the discretion of the treating anesthesiologist and surgeon. The goal of this study was to determine what, if any, effect the dose of bupivacaine spinal anesthesia had on perioperative outcomes in TJA. Methods: A total of 761 TJAs performed with bupivacaine spinal anesthesia by arthroplasty surgeons were retrospectively reviewed. Perioperative outcomes evaluated were operation duration, estimated blood loss, length of stay (LOS) in the postanesthesia care unit, hospital LOS, discharge disposition, episodes of intraoperative hypotension, postoperative nausea and vomiting, and missed physical therapy sessions because of postoperative symptoms of hypotension. A Student’s t-test was used for continuous variables, and a chi-squared test was used for categorical variables. Results: Of the 761 patients, 499 (65.6%) received 15 mg isobaric bupivacaine while 262 (34.4%) received

Background: Robot-assisted surgery was developed to improve accuracy and outcomes in total knee arthroplasty (TKA). One important determinant of TKA success is a well-balanced knee throughout the range of motion. The purpose of this study is to determine if robot-assisted TKA (RA-TKA) results in improved intracompartmental ligament balance compared with conventional jig-based instrumentation (CM-TKA). Methods: This retrospective cohort study included 2 cohorts—a CM-TKA (n = 49) vs RA-TKA (n = 37) cohort. Demographic and intraoperative data, including intraoperative compartment loads, were measured after final implant implantation in extension (10°), mid-flexion (45°), and full flexion (90°), using an intraoperative compartment pressure sensor. An a priori power analysis revealed our study exhibited >80% power in detecting a 5-pound (lb) difference in compartment loads in the 2 cohorts. Results: There was no difference between medial and lateral compartment loads in extension, mid-flexion, and full flexion for the conventional (15.1 lbs, 15.9 lbs, and 13.4 lbs, respectively) vs RA-TKA (14.2 lbs, 15.1 lbs, and 10.3 lbs, respectively). The percentage of patients with high load compartment pressure in flexion (>40 lbs) by the conclusion of the surgery was significantly greater for the conventional (18%) vs the robotic TKA cohort (3%, P = .025). The percentage of patients with unbalanced knees (>20 lbs differential between medial and lateral compartments) in flexion was significantly greater in the conventional (24%) vs robotic TKA cohort (5%, P = .018). Conclusions: In this series, RA-TKA resulted in improved intraoperative compartment balancing in flexion with no observed difference in mid-flexion and extension compared with CM-TKA.

Background: Spinal anesthetic choice plays an underappreciated role in total hip arthroplasty (THA). Chloroprocaine, a short-acting local anesthetic, has been limited to short-duration ambulatory procedures and has not been studied in THA. We compare perioperative outcomes of patients undergoing fast-track THA using chloroprocaine spinal anesthesia with those who have surgery with a longer-acting agent (bupivacaine). Methods: A total of 143 THAs performed under spinal anesthesia by 3 arthroplasty surgeons between November 2018 and July 2019 were retrospectively reviewed. Patients receiving chloroprocaine were matched 1:1 by demographics to patients receiving bupivacaine. Ultimately, 74 patients were included (37 chloroprocaine and 37 bupivacaine). The primary outcome was hospital length of stay (LOS). Other perioperative outcomes were also evaluated. Results: A total of 37 patients (50%) received chloroprocaine (60 mg), whereas 37 (50%) received bupivacaine (median 10 mg, range 8-15 mg). Among the matched groups, chloroprocaine use was associated with shorter hospital LOS (0.9 vs 1.2 days; P = .03), shorter operative time (68.2 vs 83.6 minutes, P = .03), lower estimated blood loss (184.7 vs 218.9 mL, P = .02), shorter postanesthesia care unit LOS (139.4 vs 194.9 minutes; P = .04), and less intraoperative hypotension (59.5% vs 83.8%, P = .02). Patients receiving chloroprocaine were also more commonly discharged home (100% vs 89.2%; P = .04). Conclusions: Chloroprocaine is a safe and reliable option for patients to mobilize rapidly and leave the hospital sooner after THA. Compared with bupivacaine, it is associated with shorter hospital LOS and higher likelihood for discharge to home.

Background: New dressings purport to reduce surgical wound complications after total hip arthroplasty (THA). This study compared delayed wound healing rates and reoperations between 2 increasingly popular dressings: a silver-impregnated occlusive (standard) dressing and a 2-octyl cyanoacrylate adhesive with polyester mesh. Methods: This retrospective cohort study reviewed 431 consecutive THAs performed by 2 surgeons between January 2017 and May 2019. One hundred and eight were excluded for not using standard or mesh dressings. A final 323 cases were separated into 2 cohorts: mesh (n = 186) and standard dressings (n = 137). Standard dressings were removed at 1 week. Mesh persisted until nonadherent, approximately 3-4 weeks. The surgeon assessed delayed wound healing at the 2-week postoperative visit. Secondary outcomes include deep infection and return to the operating room for a wound-related diagnosis. Differences were determined using the chi-square test. Results: There were no demographic, comorbidity, or surgical differences between groups. There were 22 total cases of delayed wound healing with 7 (3.8%) in the mesh group and 15 (10.9%) in the standard dressing group (P = .01). There were no significant differences in reoperations (2 [1.1%] vs 2 [1.5%], P = .76) or deep infections (2 [1.1%] vs 1 [0.7%], P = .75). Conclusions: Mesh dressings are a safe and reliable dressing type for THA and were associated with a decrease in early wound healing complications when compared with standard, silver-impregnated occlusive dressings in this retrospective series. The mesh tension sharing properties and longer duration of occlusive protection may explain this difference. Level of Evidence: Level III.

Background: Anterior-based approaches to primary total hip arthroplasty (THA) are being used more frequently, and several variations have been described. The supine direct anterior (DA) approach has been widely studied, but few studies have compared it with the mini-anterolateral (mini-AL) approach (abductor-sparing, Watson-Jones approach) in the lateral decubitus position. This study aims to compare early perioperative complications and outcomes between these 2 approaches. Methods: This study retrospectively reviewed 340 consecutive THAs (n = 170 DA, n = 170 mini-AL) performed by 3 arthroplasty surgeons at a single institution between January 2017 and May 2018. The primary outcome was reoperation for any reason within 1 year. Secondary outcomes included wound-healing complications and several perioperative factors. A Student’s t-test was used for continuous variables, and a chi-squared test was used for categorical variables. Results: In this cohort, 6 patients (4%) from the mini-AL group required reoperation within 1 year, compared with 2 patients (1%) from the DA group (P = .024). However, the DA group had 13 patients (8%) with wound-healing complications compared with 6 patients (4%) in the mini-AL group 4% (P = .036). Perioperative outcomes were similar for operative time, distance walked with physical therapy, morphine milligram equivalent consumed, length of stay, and discharge disposition. Pain scores during index hospitalization were also similar. Conclusions: Patients who underwent THA using the supine DA approach had fewer reoperations within 1 year, but more wound-healing complications compared with the mini-AL approach in the lateral decubitus position. For surgeons performing primary THA using an anterior-based approach, relative risks and benefits of these approaches must be understood. Level of Evidence: Level III.

A 56-year-old male laborer with severe superior and medial acetabular protusio was treated with a cementless left total hip arthroplasty (THA) using an inexpensive technique that preserved the incarcerated femoral head in situ. The head was never dislocated, so the ligamentum was not disrupted. Wires stabilized the femoral head while reaming to prevent it from spinning, and multiple screws united the cup, autograft, and pelvis. At 2-year follow-up, the patient has pain-free hip function, radiographic union, and no component loosening or graft resorption. Keywords: Total hip arthroplasty, Acetabular protrusio, Femoral head bone autograft, Acetabular augment

Background: The utilization of the S2 Alar-Iliac (S2AI) screw provides an optimal method of spinopelvic fixation. The free-hand placement of these screws obviates the use of intra-operative fluoroscopy and relies heavily on sacropelvic anatomy; variations of this anatomy could alter the ideal screw trajectory. The S2AI corridor is near several neurovascular structures, thus an accurate trajectory is critical. The reported angles of trajectory vary within the literature and a paucity of data exists on how patient morphometry influences ideal screw trajectory. We sought to examine the relationship between ideal screw trajectory and pelvic parameters. Methods: The records of 99 consecutive patients with degenerative thoracolumbar pathology were reviewed and pelvic parameters including sacral slope, pelvic tilt, and pelvic incidence were measured with preoperative standing radiographs. Using 3-dimensional computed tomography (CT) reconstructions, an ideal S2AI trajectory was defined and anteroposterior (horizontal) and cephalocaudal (sagittal) angles were recorded. Results: Pelvic tilt was found to have a moderate inverse correlation with cephalocaudal screw trajectory (r=-0.467, p-value=0.006). Pelvic incidence and sacral slope had weaker correlations with cephalocaudal screw angle. In subgroup analysis, patients with high pelvic tilt (>20°) had a significantly lower cephalocaudal screw trajectory (24.9 ± 3.7° versus 29.8 ± 2.8°, p-value=

Category: Ankle, Trauma Introduction/Purpose: Fibular stress fractures are rare injuries that are incompletely understood in terms of pathogenesis and predisposing factors. While stress fractures all involve relative stress concentration in a finite area leading to local mechanical failure, the risk factors for this injury have not been assessed. Their relative rarity has made understanding of these risk factors difficult. In a retrospective case series, we sought to define demographic and radiographic risk factors for isolated fibular stress fractures. Methods: We retrospectively reviewed the records of 13 patients with isolated fibular stress fractures at our institution between January 2010 and November 2018. We collected and analyzed baseline demographic data and radiographic parameters including prior history of fracture, location of stress fracture, bone quality, and heel alignment. Results: The cohort consisted of 6 men and 7 women with a mean age of 41.8 years at the time of diagnosis of the fibular stress fracture. The average BMI in the cohort was 28.5 kg/m2. The location of the stress fracture was in the distal third of the fibula in 69.2% (9/13), proximal third in 23.1% (3/13), and middle third in 7.7% (1/13). There was no evidence of osteopenia on radiographic analysis in any patients, by assessment of the senior author and attending radiologist at our institution. Isolated stress fractures in the distal third of the fibula were observed more commonly in women. Distal fibula stress fractures were associated with physiologic hindfoot valgus, while proximal fractures were seen with a varus hindfoot. Conclusion: In this retrospective case series of a rare injury, isolated stress fractures in the distal third of the fibula were the most common fibular stress fracture. Proximal fibular stress fractures were associated with a varus hindfoot. All fractures in this case series healed with immobilization in a walking boot with or without a short period of nonweightbearing.