Search

BACKGROUND: Doping is the use of prohibited substances by athletes to improve their performance. World Anti‐Doping Agency (WADA)‐accredited laboratories require various metabolite reference standards of the prohibited chemical substances or drugs for routine quality control. Therefore, it was proposed to develop efficient synthetic methodologies for highly pure reference materials of Phase II metabolites of octopamine, norfenefrine and etilefrine, which are prohibited in sports by WADA under the S6 stimulant category. The reference materials were characterized using various analytical techniques. New high‐performance liquid chromatography with diode‐array detection (HPLC‐DAD) methods were developed for purity assessment. RESULTS: The synthesized Phase II metabolite reference standards, i.e. octopamine sulfate, norfenefrine sulfate and etilefrine sulfate, were confirmed by 1H NMR, 13C NMR, liquid chromatography–high‐resolution mass spectrometry (LC‐HRMS), attenuated total reflectance Fourier transform infrared and thermogravimetric analysis. In the LC‐HRMS study, the mass error value of synthesized compounds was less than 10 ppm (error) which confirms the identity of the reference materials. New HPLC‐DAD method were developed to ensure the purity of the reference materials. We used the HILIC column as metabolite reference standards are highly polar. The mobile phase was composed of water and acetonitrile in fixed composition. The HPLC‐DAD purity of the developed reference materials was observed as 100%. CONCLUSION: We have developed reproducible synthetic routes for octopamine sulfate, norfenefrine sulfate and etilefrine sulfate, which are prohibited in sports by WADA. The synthesized metabolites were characterized using different advanced analytical techniques. These reference standards will be helpful to all WADA‐accredited laboratories in routine anti‐doping testing. © 2023 Society of Chemical Industry (SCI). [ABSTRACT FROM AUTHOR]

A rapid, clean plasma-chemical technique is demonstrated here, for cost-effective, synthesis of surface vacancy engineered, 2D, molybdenum-oxide nanomaterials, during a one-step, integrated synthesis-hydrogenation process for biomedical applications. A laminar plasma beam populated with O and H radicals impinges on a molybdenum target, out of which molybdenum-oxide nanomaterials are very rapidly generated with controlled surface O vacancies. 2D, dark-blue coloured, nano-flake/ribbon like MoO3− x is produced maximum up to 194 g h−1, the core of which still remains as stoichiometric molybdenum-oxide. These nanomaterials can get heated-up by absorbing energy from a near-infrared (NIR) laser, which enable them as photothermal therapy (PTT) candidate material for the invasive precision therapy of cancer. The surface defects endows the products with robust ferromagnetism at room temperature conditions (maximum saturation-magnetization: 6.58 emu g−1), which is order of magnitude stronger than most other vacancy engineered nanomaterials. These nanometric metal-oxides are observed to be perfectly compatible in animal physiological environment and easily dispersed in an aqueous solution even without any pre-treatment. The MoO3− x nanomaterials are stable against further oxidation even under prolonged atmospheric exposure. In vitro experiments confirm that they have ideal efficacy for photothermal ablation of human and murine melanoma cancer at relatively lower dose. During in vivo PTT treatments, they may be manipulated with a simple external magnetic field for targeted delivery at the malignant tumours. It is demonstrated that commensurate to the neutralization of the malignant cells, the nanomaterials themselves get self-degraded, which should get easily excreted out of the body. [ABSTRACT FROM AUTHOR]

Nephropathy is the most prevalent microvascular disorder in diabetes mellitus. Oxidative stress and inflammatory cascade provoked by the persistent hyperglycemic milieu play integral roles in the aggravation of renal injury and fibrosis. We explored the impact of biochanin A (BCA), an isoflavonoid, on the inflammatory response, nod-like receptor protein 3 (NLRP3) inflammasome activation, oxidative stress, and fibrosis in diabetic kidneys. A high-fat-diet/streptozotocin (HFD/STZ)-induced experimental model of diabetic nephropathy (DN) was established in Sprague Dawley rats, and in vitro studies were performed in high-glucose-induced renal tubular epithelial (NRK-52E) cells. Persistent hyperglycemia in diabetic rats was manifested by perturbation of renal function, marked histological alterations, and oxidative and inflammatory renal damage. Therapeutic intervention of BCA mitigated histological changes, improved renal function and antioxidant capacity, and suppressed phosphorylation of nuclear factor-kappa B (NF-κB) and nuclear factor-kappa B inhibitor alpha (IκBα) proteins. Our in vitro data reveal excessive superoxide generation, apoptosis, and altered mitochondrial membrane potential in NRK-52E cells that were cultured in a high-glucose (HG) environment were subsided by BCA intervention. Meanwhile, the upregulated expressions of NLRP3 and its associated proteins, the pyroptosis-indicative protein gasdermin-D (GSDMD) in the kidneys, and HG-stimulated NRK-52E cells were significantly ameliorated by BCA treatment. Additionally, BCA blunted transforming growth factor (TGF)-β/Smad signaling and production of collagen I, collagen III, fibronectin, and alfa-smooth muscle actin (α-SMA) in diabetic kidneys. Our results indicate the plausible role of BCA in attenuating DN, presumably through modulation of the apoptotic cascade in renal tubular epithelial cells and the NF-κB/NLRP3 axis. [ABSTRACT FROM AUTHOR]

Analytical sample preparation techniques are essential for assessing chemicals in various biological matrices. The development of extraction techniques is a modern trend in the bioanalytical sciences. We fabricated customized filaments using hot-melt extrusion techniques followed by fused filament fabrication-mediated 3D printing technology to rapidly prototype sorbents that extract non-steroidal anti-inflammatory drugs from rat plasma for determining pharmacokinetic profiles. The filament was prototyped as a 3D-printed sorbent for extracting small molecules using AffinisolTM, polyvinyl alcohol, and triethyl citrate. The optimized extraction procedure and parameters influencing the sorbent extraction were systematically investigated by the validated LC-MS/MS method. Furthermore, a bioanalytical method was successfully implemented after oral administration to determine the pharmacokinetic profiles of indomethacin and acetaminophen in rat plasma. The Cmax was found to be 0.33 ± 0.04 µg/mL and 27.27 ± 9.9 µg/mL for indomethacin and acetaminophen, respectively, at the maximum time (Tmax) (h) of 0.5–1 h. The mean area under the curve (AUC0–t) for indomethacin was 0.93 ± 0.17 µg h/mL, and for acetaminophen was 32.33± 10.8 µg h/mL. Owing to their newly customizable size and shape, 3D-printed sorbents have opened new opportunities for extracting small molecules from biological matrices in preclinical studies. [ABSTRACT FROM AUTHOR]

Tamoxifen and toremifene are two selective estrogen receptor modulators (SERMs) commonly used to treat breast cancer in women. Toremifene is well‐known as a triphenylethylene derivative. Carboxy toremifene is a common metabolite of toremifene and tamoxifen. Since 2005, the World Anti‐Doping Agency (WADA) has banned the SERMs category during in and out of competition. These substances are in the S4 category in the WADA prohibited list as "agents with anti‐oestrogenic activity." However, there is no commercially accessible carboxy toremifene reference material in the market. This research highlights the novel synthetic procedure, the development of a carboxy toremifene HPLC method, and validation, along with detailed characterization using advanced analytical techniques using 1H NMR, HRMS, FT‐IR‐ATR and UV–visible spectroscopy. RP‐HPLC‐DAD method was developed and validated to assess the purity of carboxy toremifene. Developed reference material has shown 100% purity. Therefore, we recommend that this synthesized carboxy toremifene may be used as reference material to strengthen the WADA‐accredited lab to maintain a clean sports mission during sports competitions. [ABSTRACT FROM AUTHOR]

Objectives 3D printed polymeric film intended for topical delivery of berberine (BBR) was developed using stereolithography (SLA) to enhance its local concentrations. PEGDMA was utilized as photopolymerizing resin, with PEG 400 as an inert component to facilitate BBR solubilization and permeation. Methods Three batches of topical films were printed by varying resin and PEG 400 compositions. In-vitro physicochemical characterizations of the 3D printed films were performed using several analytical techniques including ex-vivo drug permeation studies. In-vivo skin irritation studies were also conducted to assess the skin irritation potential. Key findings Films were 3D printed according to design specifications with minimal variations. Microscopic analysis confirmed 3D architecture, while thermal and X-ray diffraction studies revealed amorphous BBR entrapment. Drug permeation study showed effective ex-vivo diffusion up to 344.32 ± 61.20 µg/cm2 after 24.0 h possessing a higher ratio of PEG 400. In-vivo skin irritation studies have suggested the non-irritant nature of printed films. Conclusions Results indicated the suitability of SLA 3D printing for topical application in the treatment of skin diseases. The presence of PEG 400 in the printed 3D films facilitated BBR diffusion, resulting in an improved flux in ex-vivo model and non-irritant properties in vivo. [ABSTRACT FROM AUTHOR]

Farnesol (FAR) is a sesquiterpene molecule with high lipophilicity that has antibacterial and other pharmacological properties along with broad nutritional values with high commercial values. Although having potential, FAR stability behavior and degradation kinetics are not available in the literature. Hence, it is very essential to develop a simple, rapid, accurate, precise, robust, cheap UHPLC-DAD method for FAR. It was also proposed to study mechanistic insights into FAR under different degradation conditions. Therefore, we hypothesized to do systematic stability studies along with degradation kinetic and accelerated stability studies. The developed method was validated. FAR was studied for stress studies, degradation kinetics and ADMET prediction of degradants. Degradation products were characterized using LC-QTOF-ESI-MS. Developed method consists of an isocratic mobile phase with a wavelength of 215 nm. The percent recoveries for FAR were observed within the acceptance limit of 98–102%. The eight major degradation products were formed during stress studies. FAR follows first-order degradation kinetics. FAR and all degradants were found to have more than 75% good human oral absorption, and are non-toxic. FAR UHPLC-DAD method was developed, validated and performed stability studies to know the possible degradation pattern along with degradation kinetic studies. [ABSTRACT FROM AUTHOR]

Prenylamine was initially used for the treatment of angina pectoris and later on withdrawn from the market in 1988 due to cardiac arrhythmias concern. The major phase I metabolite of prenylamine is p‐hydroxy prenylamine that has a chiral center in the structure. Even though p‐hydroxy prenylamine was synthesized earlier, it lacked complete analytical developments for chiral high‐performance liquid chromatography (HPLC) separation. However, p‐hydroxy prenylamine reference material is not commercially available. The innovation of this manuscript is the development and validation of a chiral HPLC separation method and more extensive characterization of the reference material than previously reported method. Therefore, it was hypothesized to develop and validate normal phase HPLC method for p‐hydroxy prenylamine reference material. p‐Hydroxy prenylamine was synthesized in two batches and characterized successfully using 13C NMR, 1H NMR, high‐resolution mass spectrometry (HRMS), Fourier transform infrared spectroscopy (FT‐IR), and thermogravimetric analysis (TGA). A normal phase chiral HPLC method was developed to analyze the p‐hydroxy prenylamine purity. Separation of the p‐hydroxy prenylamine enantiomers were achieved using ultra‐high‐performance liquid chromatography (UHPLC) on a ChiralCel ODH column at wavelength of 220 nm. The developed method was validated in terms of its linearity, accuracy, precision, and robustness for purification, purity assessment, and stability studies. Proton and carbon peaks were confirmed by nuclear magnetic resonance (NMR) analysis. Functional groups were confirmed by FT‐IR. Loss on drying was 0.3% and 0.6% for Batches 1 and 2, respectively. The purity of the developed reference material for Batches 1 and 2 was found to be 99.59% and 100%, respectively. Therefore, the synthesized batches of p‐hydroxy prenylamine can be used in dope testing as reference material. [ABSTRACT FROM AUTHOR]

This work focuses on the extrusion of a brittle, tacky, cationic copolymer i.e. Eudragit® E-100 to prepare filament and subsequent 3D printing of hollow capsular device using the extruded filament. An optimum amount of talc and triethyl citrate was used for the possible extrusion of the polymer. There was no thermal and chemical degradation of the polymer observed after extrusion confirmed by DSC and FTIR analysis. Microscopic analysis of the printed capsule showed the layer-by-layer manner of 3D printing. Capsule parts were printed according to the set dimensions (00 size) with minimal deviation. Printed capsule showed the soluble behaviour in gastric fluid pH 1.2 where within 15 min the encapsulated drug encounters with the dissolution medium and almost 70% drug was dissolved within 4 hr. In case of phosphate buffer pH 6.8, the printed capsule showed a longed swelling behaviour up to 12 hr and then gradually bursting of capsule occurred wherein more than 90% encapsulated drug was dissolved within 36 hr. Enteric coating of the printed capsule showed similar behaviour in alkaline medium that observed with non-enteric capsule. This indicates the potential application of this printed capsules for both gastric and intestinal specific delayed drug delivery by a single step enteric coating process. [ABSTRACT FROM AUTHOR]

Cardiovascular diseases (CVDs) are an ever‐growing problem and are the most common cause of death worldwide. The uncontrolled production of reactive oxygen species (ROS) and the activation of ROS associated with various cell signaling pathways with oxidative cellular damage are the most common pathological conditions connected with CVDs including endothelial dysfunction, hypercontractility of vascular smooth muscle, cardiac hypertrophy and heart failure. The nuclear factor E2‐related factor 2 (Nrf2) is a basic leucine zipper redox transcription factor, together with its negative regulator, kelch‐like ECH‐associated protein 1 (Keap1), which serves as a key regulator of cellular defense mechanisms to combat oxidative stress and associated diseases. Multiple lines of evidence described here support the cardiac protective property of Nrf2 in various experimental models of cardiac related disease conditions. In this review, we emphasized the molecular mechanisms of Nrf2 and described the detailed outline of current findings on the therapeutic possibilities of the Nrf2 activators specifically from herbal origin in various CVDs. Based on evidence from various preclinical experimental models, we have highlighted the activation of Nrf2 pathway as a budding therapeutic option for the prevention and treatment of CVDs, which needs further investigation and validation in the clinical settings. [ABSTRACT FROM AUTHOR]

Drug–drug interactions mediated by transporters are a serious clinical concern hence a tremendous amount of work has been done on the characterization of the transporter-mediated proteins in humans and animals. The underlying mechanism for the transporter-mediated drug–drug interaction is the induction or inhibition of the transporter which is involved in the cellular uptake and efflux of drugs. Transporter of the brain, liver, kidney, and intestine are major determinants that alter the absorption, distribution, metabolism, excretion profile of drugs, and considerably influence the pharmacokinetic profile of drugs. As a consequence, transporter proteins may affect the therapeutic activity and safety of drugs. However, mounting evidence suggests that many drugs change the activity and/or expression of the transporter protein. Accordingly, evaluation of drug interaction during the drug development process is an integral part of risk assessment and regulatory requirements. Therefore, this review will highlight the clinical significance of the transporter, their role in disease, possible cause underlying the drug–drug interactions using analytical tools, and update on the regulatory requirement. The recent in-silico approaches which emphasize the advancement in the discovery of drug–drug interactions are also highlighted in this review. Besides, we discuss several endogenous biomarkers that have shown to act as substrates for many transporters, which could be potent determinants to find the drug–drug interactions mediated by transporters. Transporter-mediated drug–drug interactions are taken into consideration in the drug approval process therefore we also provided the extrapolated decision trees from in-vitro to in-vivo, which may trigger the follow-up to clinical studies. [ABSTRACT FROM AUTHOR]

In this work, hot-melt extrusion (HME) is coupled with fused deposition modeling (FDM) mediated 3D printing to demonstrate additive manufacturing to fabricate immediate release (IR) prototypes of olanzapine with the aim of enhanced solubility using a fast disintegrating polymer (Kollicoat® IR). Drug-polymer solubility and interaction parameters were estimated by Hansen solubility parameters and Hildebrand–Scott equation. The obtained values signified drug–polymer miscibility. The detailed in vitro physicochemical evaluations of the developed filament through HME and its derived 3D printed tablet by FDM technique were assessed thoroughly by several analytical means such as light microscopy, DSC, XRD, FT-IR, SEM, etc. The average disintegration time of this developed 3D printed IR tablet was found to be 63.33 (±3.6) sec complying with the USP limit. Additionally, in vitro dissolution study data revealed almost close correlations and both showed 100% of drug release within 15 min, thus complying with the definition of IR tablet. Thus, this study demonstrates the feasibility of directly using olanzapine-Kollicoat® IR through the HME process without the addition of any plasticizers, organic solvents, etc. and coupling of HME with 3D printing technology allowing prototypes of IR tablet of olanzapine. [ABSTRACT FROM AUTHOR]

Many diseases such as cancer are cured by natural substances, yet practical applications are limited by low pharmacodynamics due to poor solubility and permeability, photosensitivity, chemical instability, and first-pass metabolism. These issues are partly solved by nanotechnology. Here, we review briefly lipid-based nanomaterials for drug delivery. Indeed, lipid nanoconstructs allow active and passive targeting, biocompatibility, improved safety, and efficacy. Lipid nanoconstructs include both vesicular- and particulate-based systems such as liposomes, lipid micelles, solid lipid nanoparticles, and nanostructured lipid carriers. [ABSTRACT FROM AUTHOR]

Lymphatic filariasis, commonly known as elephantiasis, is a painful and profoundly disfiguring disease. Wuchreria bancrofti (Wb) is responsible for >90% of infections and the remainder are caused by Brugia spp. Mosquitoes of the genera Culex (in urban and semi-urban areas), Anopheles (in rural areas of Africa and elsewhere), and Aedes (in Pacific islands) are the major vectors of W. bancrofti. A preventive chemotherapy called mass drug administration (MDA), including albendazole with ivermectin or diethylcarbamazine citrate (DEC) is used in endemic areas. Vector control strategies such as residual insecticide spraying and long-lasting insecticidal nets are supplemental to the core strategy of MDA to enhance elimination efforts. However, increasing insecticide resistance in mosquitoes and drug resistance in parasite limit the effectiveness of existing interventions, and new measures are needed for mosquito population control and disruption of mosquito-parasite interactions to reduce transmission. Mosquito insulin signaling regulates nutrient metabolism and has been implicated in reduced prevalence and intensity of malaria parasite, Plasmodium falciparum, infection in mosquitoes. Currently no data are available to assess how insulin signaling in mosquitoes affects the development of multi-cellular parasites, such as filarial nematodes. Here, we show that insulin receptor knockdown in blood fed C. quinquefasciatus, the major vector of Wb in India, completely blocks the development of filarial nematode parasite to the infective L3 stage, and results in decreased ecdysteroid production and trypsin activity leading to fewer mosquito eggs. These data indicate that a functional mosquito insulin receptor (IR) is necessary for filarial parasite development and mosquito reproduction. Therefore, insulin signaling may represent a new target for the development of vector control or parasite blocking strategies. [ABSTRACT FROM AUTHOR]

Background: Malaria presents public health challenge despite extensive intervention campaigns. A 30-year hindcast of the climatic suitability for malaria transmission in India is presented, using meteorological variables from a state of the art seasonal forecast model to drive a process-based, dynamic disease model. Methods: The spatial distribution and seasonal cycles of temperature and precipitation from the forecast model are compared to three observationally-based meteorological datasets. These time series are then used to drive the disease model, producing a simulated forecast of malaria and three synthetic malaria time series that are qualitatively compared to contemporary and pre-intervention malaria estimates. The area under the Relative Operator Characteristic (ROC) curve is calculated as a quantitative metric of forecast skill, comparing the forecast to the meteorologically-driven synthetic malaria time series. Results and discussion: The forecast shows probabilistic skill in predicting the spatial distribution of Plasmodium falciparum incidence when compared to the simulated meteorologically-driven malaria time series, particularly where modelled incidence shows high seasonal and interannual variability such as in Orissa, West Bengal, and Jharkhand (North-east India), and Gujarat, Rajastan, Madhya Pradesh and Maharashtra (North-west India). Focusing on these two regions, the malaria forecast is able to distinguish between years of “high”, “above average” and “low” malaria incidence in the peak malaria transmission seasons, with more than 70% sensitivity and a statistically significant area under the ROC curve. These results are encouraging given that the three month forecast lead time used is well in excess of the target for early warning systems adopted by the World Health Organization. This approach could form the basis of an operational system to identify the probability of regional malaria epidemics, allowing advanced and targeted allocation of resources for combatting malaria in India. [ABSTRACT FROM AUTHOR]

Stereolithography (SLA) 3D printing of pharmaceuticals suffers from the problem of light scattering, which leads to over-curing, resulting in the printing of objects that are non-compliant with design dimensions and the overloading of drugs. To minimize this problem, photoabsorbers such as tartrazine (food grade) can be used to absorb the stray light produced by scattering, leading to unintended photopolymerization. Ghost tablets (i.e., non-erodible inert matrices) were additively manufactured using SLA with varying ratios of polyethylene glycol diacrylate (PEGDA): polyethylene glycol (PEG) 300, along with tartrazine concentrations. The 3D printed ghost tablets containing maximum (0.03%) tartrazine were extremely precise in size and adhered to the nominal value of the metformin hydrochloride content. Resolution analysis reinstated the influence of tartrazine in achieving highly precise objects of even 0.07 mm2 area. Furthermore, 3D printed ghost tablets were characterized using analytical means, and swelling studies. Additionally, ghost tablets were tested for their mechanical robustness using dynamic mechanical and texture analysis, and were able to withstand strains of up to 5.0% without structural failure. The printed ghost tablets displayed a fast metformin hydrochloride release profile, with 93.14% release after 12 h when the PEG 300 ratio was at its maximum. Ghost tablets were also subjected to in vivo X-ray imaging, and the tablets remained intact even after four hours of administration and were eventually excreted in an intact form through fecal excretion. [Display omitted] [ABSTRACT FROM AUTHOR]

Due to the availability of a huge amount of epidemiological and public health data that require analysis and interpretation by using appropriate mathematical tools to support the existing method to control the mosquito and mosquito-borne diseases in a more effective way, data-mining tools are used to make sense from the chaos. Using data-mining tools, one can develop predictive models, patterns, association rules, and clusters of diseases, which can help the decision-makers in controlling the diseases. This paper mainly focuses on the applications of data-mining tools that have been used for the first time to prioritize the malaria endemic regions in Manipur state by using Self Organizing Maps (SOM). The SOM results (in two-dimensional images called Kohonen maps) clearly show the visual classification of malaria endemic zones into high, medium and low in the different districts of Manipur, and will be discussed in the paper. [ABSTRACT FROM AUTHOR]

• Lipid mediated nanostructured lipid carriers, a delivery platform for active plant constituents. • Overcome two potent active plant constituent's solubility/permeability related issues. • Development of Compritol® 888 ATO (solid lipid), and squalene (liquid lipid) based lipid matrix. • Amorphous conversion of active plant constituents after encapsulation inside the lipid matrix. • Safety of NLCs was evidenced through no haemolysis in blood samples. Active plant constituents obtained from edible sources have manifested their pharmacological potential as a therapy against several diseases. But the lack of their desired physicochemical properties such as solubility, permeability ultimately leads to poor bioavailability. Two potent active plant constituents namely, quercetin and piperine having a problem with either solubility or permeability or both, and hence require an advanced lipid-mediated separate formulation system to improve their aforementioned concerns. Concerning advancement in nanoformulations, lipid-based nano-carriers systems have created their mark as a novel drug delivery system. Therefore, an advanced formulation like nanostructured lipid carriers (NLCs) has been formulated individually for both the active plant constituents/drugs through the solvent evaporation technique using high shear homogenization method followed by sonication. Compritol® 888 ATO, a solid lipid, and squalene as liquid lipid was used in their optimized ratios to formulate individual NLCs. Blank and individual drugs loaded NLCs were further characterized for their in vitro physicochemical properties. NLCs showed a negative surface charge with an average particle size below 200 nm. Electron microscopy images showed an anomalous structure of both the formulated NLCs with higher % drug encapsulation efficiency (DEE) with the desired in vitro drug release profile. In the case of quercetin-NLCs, 93.18 ± 5.5 % DEE was observed followed by drug release up to 45.0 ± 1.3 % within 12 h, while piperine-NLCs showed 91.80 ± 2.51 % DEE and drug release up to 38 ± 5.2 % at the same time. XRD and DSC plots showed the conversion of both the drugs into an amorphous structure encapsulated in a lyophilized NLCs matrix. Finally, the safety profile for formulated NLCs was confirmed by haemolysis assay. Hence, the developed active plant constituents enriched NLCs can further be delivered separately and/or in combination, and also may further be evaluated both in vitro and in vivo means. [ABSTRACT FROM AUTHOR]

Depression, anxiety and related mood disorders are major psychiatric illnesses worldwide, and chronic stress appears to be one of the primary underlying causes. Therapeutics to treat these debilitating disorders without a relapse are limited due to the incomplete molecular understanding of their etiopathology. In addition to the well-studied genetic component, research in the past two decades has implicated diverse epigenetic mechanisms in mediating the negative effects of chronic stressful events on neural circuits. This includes the cognitive circuitry, where the dynamic hippocampal dentate gyrus (DG) neurogenesis gets affected in depression and related affective disorders. Most of these epigenetic studies have focused on the impact of acetylation/deacetylation and methylation of several histone lysine residues on neural gene expression. However, there is a dearth of investigation into the role of demethylation of these lysine residues in chronic stress-induced changes in neurogenesis that results in altered behaviour. Here, using the chronic social defeat stress (CSDS) paradigm to induce depression and anxiety in C57BL/6 mice and ex vivo DG neural stem/progenitor cell (NSCs/NPCs) culture we show the role of the members of the JMJD2/KDM4 family of histone lysine demethylases (KDMs) in mediating stress-induced changes in DG neurogenesis and mood disorders. The study suggests a critical role of JMJD2D in DG neurogenesis. Altered enrichment of JMJD2D on the promoters of Id2 (inhibitor of differentiation 2) and Sox2 (SRY-Box Transcription Factor 2) was observed during proliferation and differentiation of NSCs/NPCs obtained from the DG. This would affect the demethylation of repressive epigenetic mark H3K9, thus activating or repressing these and possibly other genes involved in regulating proliferation and differentiation of DG NSCs/NPCs. Treatment of the NSCs/NPCs culture with Dimethyloxallyl Glycine (DMOG), an inhibitor of JMJDs, led to attenuation in their proliferation capacity. Additionally, systemic administration of DMOG in mice for 10 days induced depression-like and anxiety-like phenotype without any stress exposure. [ABSTRACT FROM AUTHOR]

Oxidative damage and accumulation of extracellular matrix (ECM) components play a crucial role in the adverse outcome of cardiac hypertrophy. Evidence suggests that nuclear factor erythroid-derived factor 2 related factor 2 (Nrf2) can modulate oxidative damage and adverse myocardial remodeling. Daphnetin (Daph) is a coumarin obtained from the plant genus Daphne species that exerts anti-oxidative and anti-inflammatory properties. Herein, we investigated the roles of Daph in transverse aortic constriction (TAC)-induced cardiac hypertrophy and fibrosis in mice. TAC-induced alterations in cardiac hypertrophy markers, histopathological changes, and cardiac function were markedly ameliorated by oral administration of Daph in mice. We found that Daph significantly reduced the reactive oxygen species (ROS) generation, increased the nuclear translocation of Nrf2, and consequently, reinstated the protein levels of NAD(P)H quinone dehydrogenase1 (NQO1), heme oxygenase-1 (HO-1), and other antioxidants in the heart. Besides, Daph significantly inhibited the TAC-induced accumulation of ECM components, including α-smooth muscle actin (α-SMA), collagen I, collagen III, and fibronectin, and interfered with the TGF-β1/Smad2/3 signaling axis. Further studies revealed that TAC-induced terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) positive nuclei and the protein levels of Bax/Bcl2 ratio and cleaved caspase 3 were substantially decreased by Daph treatment. We further characterized the effect of Daph on angiotensin II (Ang–II)–stimulated H9c2 cardiomyoblast cells and observed that Daph markedly decreased the Ang-II induced increase in cell size, production of ROS, and proteins associated with apoptosis and fibrosis. Mechanistically, Daph alone treatment enhanced the protein levels of Nrf2, NQO1, and HO-1 in H9c2 cells. The inhibition of this axis by Si-Nrf2 transfection abolished the protective effect of Daph in H9c2 cells. Taken together, Daph effectively counteracted the TAC-induced cardiac hypertrophy and fibrosis by improving the Nrf2/HO-1 axis and inhibiting the TGF-β1/Smad2/3 signaling axis. [Display omitted] • Oxidative stress and deposition of ECM components are key factors in the development of cardiac hypertrophy. • Nrf2 signaling can modulate oxidative damage and adverse myocardial remodeling. • Daphnetin is a plant-derived coumarin derivative that possesses anti-oxidative and anti-inflammatory activity. Daphnetin ameliorates TAC-induced cardiac hypertrophy in vivo and Ang-II induced hypertrophy in H9c2 cardiomyoblast. [ABSTRACT FROM AUTHOR]

[Display omitted] A 3D printed assembly of hollow microneedles (HMNs) array, conjoined with a reservoir void, was designed and additively manufactured using stereolithography (SLA) technology utilizing a proprietary class-I resin. The HMNs array was utilized for transdermal delivery of high molecular weight antibiotics, i.e., rifampicin (M w 822.94 g/mol), which suffers from gastric chemical instability, low bioavailability, and severe hepatotoxicity. HMNs morphology was designed with sub-apical holes present in a quarter of the needle tip to improve its mechanical strength and integrity of the HMNs array. The HMNs array was characterized by optical microscopy and electron microscopy to ascertain the print quality and uniformity across the array. The system was also subjected to mechanical characterization for failure and penetration analyses. The ex vivo permeation and consequent transport of rifampicin across porcine skin were systematically evaluated. Finally, in vivo examinations of rifampicin administration through the microneedle reservoir system in SD rats revealed efficient penetration and desired bioavailability. [ABSTRACT FROM AUTHOR]

Analytical sample preparation techniques are regarded as crucial steps for analyzing compounds from different biological matrices. The development of new extraction techniques is a modern trend in the bioanalytical sciences. 3D printed techniques have emerged as a valuable technology for prototyping devices in customized shapes for a cost-effective way to advance analytical sample preparation techniques. The present study aims to fabricate customized filaments through the hot-melt extrusion (HME) technique followed by fused deposition modeling mediated 3D printing process for rapid prototyping of 3D printed sorbents to extract a sample from human plasma. Thus, we fabricated our own indigenous filament using poly (vinyl alcohol), Eudragit® RSPO, and tri-ethyl citrate through HME to prototype the fabricated filament into a 3D printed sorbent for the extraction of small molecules. The 3D sorbent was applied to extract hydrocortisone from human plasma and analyzed using a validated LC-MS/MS method. The extraction procedure was optimized, and the parameters influencing the sorbent extraction were systematically investigated. The extraction recovery of hydrocortisone was found to be >82% at low, medium, and high quality control samples, with a relative standard deviation of <2%. The intra-and inter-day precisions for hydrocortisone ranged from 1.0% to 12% and 2.0%–10.0%, respectively, whereas the intra-and inter-day accuracy for hydrocortisone ranged from 93.0% to 111.0% and 92.0% to 110.0%, respectively. The newly customizable size and shape of the 3D printed sorbent opens new possibilities for extracting small molecules from human plasma. [Display omitted] • Developed indigenous filaments through hot-melt-extrusion technique followed by 3D printed sorbent. • 3D printed sorbents used for sample extraction of molecule. • The extraction recovery of hydrocortisone was found to be >82% with <2% relative standard deviation. [ABSTRACT FROM AUTHOR]