Search

In the biomedical fields of bone regenerative therapy, the immobilization of proteins on the bioceramic particles to maintain their highly ordered structures is significantly important. In this review, we comprehensively discussed the importance of the specific surface layer, which can be called “non-apatitic layer”, affecting the immobilization of proteins on particles such as hydroxyapatite and amorphous silica. It was suggested that the water molecules and ions contained in the non-apatitic layer can determine and control the protein immobilization states. In amorphous silica particles, the direct interactions between proteins and silanol groups make it difficult to immobilize the proteins and maintain their highly ordered structures. Thus, the importance of the formation of a surface layer consisting of water molecules and ions (i.e., a non-apatitic layer) on the particle surfaces for immobilizing proteins and maintaining their highly ordered structures was suggested and described. In particular, chlorine-containing amorphous silica particles were also described, which can effectively form the surface layer of protein immobilization carriers. The design of the bio-interactive and bio-compatible surfaces for protein immobilization while maintaining the highly ordered structures will improve cell adhesion and tissue formation, thereby contributing to the construction of social infrastructures to support super-aged society.

Amorphous silica particles (ASPs) have been reported to exhibit bioactive properties and are becoming the focus of attention as bioceramics. However, their interactions with proteins in living organisms remain to be understood and need to be investigated in order to achieve wider applications. Our research group found that chlorine (Cl)-containing ASPs are useful for protein immobilization. Photofunctional dyes (fluorescein (FS−), methylene blue (MB+)) that have the carboxy and amino groups as the main functional groups were immobilized on the Cl-containing ASPs via the mechanochemical method as the model molecule and their spectral properties were used to investigate and discuss the organic/inorganic interfacial bonding states. In FS−, the oxygen atoms of the carboxy groups in the molecule were immobilized by the hydrogen bonds with the silanol groups on the ASPs surfaces, indicating that there is an optimum Cl content for the immobilization as the monomer state. In the case of MB+, as the Cl concentration in the ASPs increases, the immobilization via the electrostatic interactions between the Cl in the ASPs and the terminal dimethylamino group, and the hydrogen bonding between the N atoms of the MB+ hetero ring and the particle silanol group were enhanced. These results mainly suggest that the protein adsorption system occurs through the hydrogen bonding between the carboxy groups of the protein and the silanol groups on the particles and via electrostatic interactions between the amino groups of the protein and the dissociated silanol groups and the contained Cl at the particles. Thus, the spectral characterization using dyes as probes is expected to predict the protein interactions with the amorphous silica particles.

Abstract Alpha‐tricalcium phosphate (α‐TCP), which can be converted to calcium‐deficient hydroxyapatite (HA) by hydrolysis reaction, has been researched as a bone filling. Although the composites of α‐TCP with various organic molecules can exhibit a novel functionality, the reaction based on the addition of the interactive organic molecules has not been understood. Investigation of the hydrolysis conversion process under various conditions can lead to the elucidation of the biomineralization process. In this study, we investigated the hydrolysis conversion of α‐TCP to HA in the presence of orotic acid (Ort). As a result, the conversion rate from α‐TCP to HA at the reaction time of 3 h was improved to be more than five times as compared to that in the absence of Ort. Moreover, the addition of Ort promoted the crystal growth and suppressed the crystal growth in the m‐plane direction. Furthermore, the mechanism for promoting HA formation is assumed to be related to the molecular structure of Ort, which is capable of forming the interactions between carboxylate and Ca2+ ions.

Titania and silica have been recognized as potential drug delivery system (DDS) carriers. For this application, controllable biocompatibility and the suppression of the initial burst are required, which can be provided by a calcium phosphate (CP) coating. However, it is difficult to control the morphology of a CP coating on the surface of carrier particles owing to the homogeneous nucleation of CP. In this study, we report the development of a CP-coating method that homogeneously corresponds to the shapes of silica–titania (SiTi) porous nanoparticles. We also demonstrate that controlled surface roughness of CP coatings could be achieved in SBF using SiTi nanoparticles with a well-defined spherical shape, a uniform size, and a tunable nanoporous structure. The precipitation of CP was performed on mono-dispersed porous SiTi nanoparticles with different Si/Ti molar ratios and pore sizes. The pore size distribution was found to significantly affect the CP coating in SBF immersion; the surfaces of the nanoparticles with bimodal pore sizes of 0.7 and 1.1–1.2 nm became rough after CP precipitation, while those with a unimodal pore size of 0.7 nm remained smooth, indicating that these two pore sizes serve as different nucleation sites that lead to different surface morphologies.

In this review, the current status of the influence of added ions (i.e., SiO44−, CO32−, etc.) and surface states (i.e., hydrated and non-apatite layers) on the biocompatibility nature of hydroxyapatite (HA, Ca10(PO4)6(OH)2) is discussed. It is well known that HA is a type of calcium phosphate with high biocompatibility that is present in biological hard tissues such as bones and enamel. This biomedical material has been extensively studied due to its osteogenic properties. The chemical composition and crystalline structure of HA change depending on the synthetic method and the addition of other ions, thereby affecting the surface properties related to biocompatibility. This review illustrates the structural and surface properties of HA substituted with ions such as silicate, carbonate, and other elemental ions. The importance of the surface characteristics of HA and its components, the hydration layers, and the non-apatite layers for the effective control of biomedical function, as well as their relationship at the interface to improve biocompatibility, has been highlighted. Since the interfacial properties will affect protein adsorption and cell adhesion, the analysis of their properties may provide ideas for effective bone formation and regeneration mechanisms.

Theranostics (bifunction of therapeutics and diagnostics) has attracted increasing attention due to its efficiency that can reduce the physical and financial burden on patients. One of the promising materials for theranostics is calcium phosphate (CP) and it is biocompatible and can be functionalized not only with drug molecules but also with rare earth ions to show photoluminescence that is necessary for the diagnostic purpose. Such the CP-based hybrids are formed in vivo by interacting between functional groups of organic molecules and inorganic ions. It is of great importance to elucidate the interaction of CP with the photofunctional species and the drug molecules to clarify the relationship between the existing state and function. Well-designed photofunctional CPs will contribute to biomedical fields as highly-functional ormultifunctional theranostic materials at the nanoscales. In this review, we describe the hybridization between CPs and heterogeneous species, mainly focusing on europium(III) ion and methylene blue molecule as the representative photofunctional species for theranostics applications.

The highly-oriented structures in biological tissues play an important role in determining the functions of the tissues. In order to artificially fabricate oriented nanostructures similar to biological tissues, it is necessary to understand the oriented mechanism and invent the techniques for controlling the oriented structure of nanobiomaterials. In this review, the oriented structures in biological tissues were reviewed and the techniques for producing highly-oriented nanobiomaterials by imitating the oriented organic/inorganic nanocomposite mechanism of the biological tissues were summarized. In particular, we introduce a fabrication technology for the highly-oriented structure of nanobiomaterials on the surface of a rubbed polyimide film that has physicochemical anisotropy in order to further form the highly-oriented organic/inorganic nanocomposite structures based on interface interaction. This is an effective technology to fabricate one-directional nanobiomaterials by a biomimetic process, indicating the potential for wide application in the biomedical field.

The mineralization process of the osseous layer, which is highly calcified in vivo, was successfully imitated by the immersion process of the decalcified fish scales in simplified simulated body fluid (SSBF). An alkali treatment was used to modify the native collagen in the decalcified Tilapia fish scale. After the alkali treatment, the mineralization was facilitated in SSBF. The XRD patterns and SEM-EDS observation results demonstrated that the externally-mineralized layers by the immersion process were highly similar to the osseous layer containing lower-crystalline hydroxyapatite, suggesting that the simple biomimetic precipitation process was developed.

Biological hydroxyapatite (HA) contains the different minor ions which favour its bio-reactivity in vivo. In this study, the preparation of HA particles containing both silicate and carbonate ions under the presence of sodium silicate was investigated, and the physicochemical properties were evaluated according to the contents and states of silicate and carbonate ions. The increment in the silicate ion reduced the crystallinity and expanded the crystalline size along with a-axis. Solid-state 29Si–NMR spectra indicated the increase in the adsorption of oligomeric silicate species on the HA particle surfaces in addition to the substitution state of silicate ions, suggesting the occurrence of the surface coating of silicates on the surfaces. The possible states of carbonate and silicate ions at the HA surfaces will provide the bioactivity.

For the development of next-generation protein-based biosensor surfaces, it is important to understand how functional proteins, such as fibrinogen (FBG), interact with polar substrate surfaces in order to prepare highly sensitive points of medical care diagnostics. FBG, which is a fibrous protein with an extracellular matrix, has both positively and negatively charged regions on its 3-dimensional surface, which makes interpreting how it effectively binds to polarized surfaces challenging. In this study, single-crystal LiNbO3 (LNO) substrates that have surface charges were used to investigate the adsorption of FBG protruding polar fragments on the positively and negatively charged LNO surfaces. We performed a combination of experiments and multi-scale molecular modeling to understand the binding of FBG in vacuum and water-solvated surfaces of LNO. XPS measurements showed that the FBG adsorption on LNO increased with increment in solution concentration on surfaces independent of charges. Multi-scale molecular modeling employing Quantum Mechanics, Monte Carlo, and Molecular Mechanics addressed the phenomenon of FBG fragment bonding on LNO surfaces. The binding simulation validated the experimental observation using zeta potential measurements which showed presence of solvated medium influenced the adsorption phenomenon due to the negative surface potential.

The aim of this study was to reveal the mechanism of enhancement of antibacterial properties of gray titania by plasma-sprayed hydroxyapatite (HAp)–amino acid fluorescent complexes under irradiation with visible light. Although visible-light–sensitive photocatalysts are applied safely to oral cavities, their efficacy is not high because of the low energy of irradiating light. This study proposed a composite coating containing HAp and gray titania. HAp itself functioned as bacteria catchers and gray titania released antibacterial radicals by visible-light irradiation. HAp-amino acid fluorescent complexes were formed on the surface of the composite coating in order to increase light intensity to gray titania by fluorescence, based on an idea bioinspired by deep-sea fluorescent coral reefs. A cytotoxicity assay on murine osteoblastlike cells revealed that biocompatibility of the HAp–amino acid fluorescent complexes was identical with the that of HAp. Antibacterial assays involving Escherichia coli showed that the three types of HAp–amino acid fluorescent complexes and irradiation with three types of light-emitting diodes (blue, green, and red) significantly decreased colony-forming units. Furthermore, kelvin probe force microscopy revealed that the HAp–amino acid fluorescent complexes preserved the surface potentials even after irradiation with visible light, whereas those of HAp were significantly decreased by the irradiation. Such a preservative effect of the HAp–amino acid fluorescent complexes maintained the bacterial-adhesion performance of HAp and consequently enhanced the antibacterial action of gray titania.

The surfactant removal from titania/octadecylamine (ODA) hybrid spherical particles through a bake treatment, solvent-extraction or their combination was investigated. The particles after removing ODA via such approaches showed spherical shape with high specific surface area ranging from 145 to 345 m2/g and were found to be dispersible in phosphate buffered saline. The ODA removal processes clearly influenced the particle surface states, the crystallization degrees, and the dispersibility. Keywords: Bioceramics, Porous materials, Water-dispersible powder, Nanostructures, Titania

Competitive adsorption of two-component solutions containing fibronectin (Fn) and albumin (Ab) on hydroxyapatite (HAp) nanocrystals was analyzed in situ using the quartz crystal microbalance with dissipation (QCM-D) technique. Adsorption of the one-component protein (Fn or Ab) and the two-component proteins adjusted to different molar ratios of Fn to Ab at a fixed Fn concentration was investigated. The frequency shift (Δf; Hz) and the dissipation energy shift (ΔD) were measured with the QCM-D technique, and the viscoelastic changes of adlayers were evaluated by the saturated ΔD/Δf value and the Voigt-based viscoelastic model. For the adsorption of the one-component protein, the Fn adlayer showed a larger mass and higher viscoelasticity than the Ab adlayer, indicating the higher affinity of Fn on HAp. For the adsorption of the two-component proteins, the viscoelastic properties of the adlayers became elastic with increase in Ab concentration, whereas the adsorption mass was similar to that of Fn in the one-component solution regardless of the Ab concentration. The specific binding mass of the Ab antibody to the adlayers increased with increase in Ab concentration, whereas that of the Fn antibody decreased. Therefore, Fn preferentially adsorbs on HAp and Ab subsequently interacts with the adlayers, indicating that the interfacial viscoelasticity of the adlayers was dominated by the interaction between Fn and Ab.

The repeatability of the adsorption and removal of fibrinogen and fetal bovine serum on hydroxyapatite (HAp) nanocrystal sensors was investigated by Fourier transform infrared (FTIR) spectroscopy and quartz crystal microbalance with dissipation (QCM-D) monitoring technique. The HAp nanocrystals were coated on a gold-coated quartz sensor by electrophoretic deposition. Proteins adsorbed on the HAp sensors were removed by (i) ammonia/hydrogen peroxide mixture (APM), (ii) ultraviolet light (UV), (iii) UV/APM, (iv) APM/UV and (v) sodium dodecyl sulfate (SDS) treatments. FTIR spectra of the reused surfaces revealed that the APM and SDS treatments left peptide fragments or the proteins adsorbed on the surfaces, whereas the other methods successfully removed the proteins. The QCM-D measurements indicated that in the removal treatments, fibrinogen was slowly adsorbed in the first cycle because of the change in surface wettability revealed by contact angle measurements. The SDS treatment was not effective in removing proteins. The APM or UV treatment decreased the frequency shifts for the reused HAp sensors. The UV/APM treatment did not induce the frequency shifts but decreased the dissipation shifts. Therefore, we conclude that the APM/UV treatment is the most useful method for reproducing protein adsorption behavior on HAp sensors.

Biological hydroxyapatite (HA) contains the different minor ions which favour its bio-reactivity in vivo. In this study, the preparation of HA particles containing both silicate and carbonate ions under the presence of sodium silicate was investigated, and the physicochemical properties were evaluated according to the contents and states of silicate and carbonate ions. The increment in the silicate ion reduced the crystallinity and expanded the crystalline size along with α-axis. Solid-state 29Si-NMR spectra indicated the increase in the adsorption of oligomeric silicate species on the HA particle surfaces in addition to the substitution state of silicate ions, suggesting the occurrence of the surface coating of silicates on the surfaces. The possible states of carbonate and silicate ions at the HA surfaces will provide the bioactivity. [ABSTRACT FROM AUTHOR]

Removal of copper ion (Cu2+) using water-soluble porphyrin and dextran was investigated. Cu2+ can be removed using dextran very rapidly in the form of a [(TMPyP) Cu]4+ complex, and the extent of removal can reach almost 100% with the addition of acetone. Electron paramagnetic resonance (EPR) results confirm the existence of Cu2+ in precipitates. The order in which dextran and acetone are added strongly influences the removal of Cu2+. This work suggests an efficient method to remove Cu2+ ions from waste water. [ABSTRACT FROM AUTHOR]

Luminescent europium(III)-doped nanoporous silica nanospheres (Eu:NPS) were successfully synthesized, and a folate N-hydroxysuccinimidyl ester (FA-NHS) molecule as a targeting ligand for cancer cells was immobilized on the nanosphere surfaces through mediation of the 3-aminopropyltriethoxysilane (APTES) adlayer. The ordered nanopores were preserved by the immobilization, and the specific surface area decreased only with the APTES immobilization, suggesting that the FA-NHS was predominantly immobilized on the outer surface of the nanopores. The photoluminescence of the nanospheres functionalized with folic acid (FA) exhibited a characteristic peak due to the interactions (e.g., energy transfer) between FA and Eu3+, and further the orange luminescence could be clearly detected by fluorescence microscopy in air and water. Furthermore, the nanospheres highly dispersed in cell culture medium exhibited nontoxicity in the cellular proliferation stages of the Hela cancer cells and NIH3T3 fibroblasts and specifically bind to the Hela cells. The nanospheres after the binding and uptake also showed intense luminescence from Therefore outer/inner cell surfaces for the culture time of 4 days. Therefore, the luminescent FA-functionalized Eu:NPS nanospheres could be used for specific targeting and imaging abilities for cancer cells. [ABSTRACT FROM AUTHOR]

When biomaterials are implanted into a body, proteins in the body fluid are adsorbed and the body cells adhere to the surfaces. Cells respond differently with different biomatefials. Hence, proper understanding of cellular response to biomatefial surfaces is crucial for successful tissue regeneration and integration. Quartz crystal microbalance with dissipation (QCM-D) is one of the most advanced in situ analyzing techniques to detect interfacial interactions of the protein adlayers between biomaterial surfaces and cells. This review article precisely describes how to analyze interfacial phenomena of the protein adsorption and subsequent cell adhesion using the QCM-D technique. In particular, we focus on understanding the biocompatibility of interfaces by explaining the role of biomatefial surfaces in protein-mediation. The viscoelastic properties of the interfaces are estimated by a Voigt-based viscoelastic model obtained from the frequency shift (Δf) and dissipation shift (ΔD) curves. Different protein adsorption and cell adhesion processes have been analyzed on different biomaterial surfaces. This approach clarifies several ambiguities of the interfacial phenomena between biomaterials and cells, and helps to design new biomaterials to be implanted in the human body. [ABSTRACT FROM AUTHOR]

Abstract: Ultrasound (US) serves as a stimulus to change shear viscosity of aqueous polysaccharides of ι-carrageenan, κ-carrageenan and, agar. The US effect was compared in their aqueous solutions at 60°C for the US frequency of 23, 45, and 83kHz. Under the US condition with 50W at 45kHz, the shear viscosity of each aqueous solution was decreased significantly. Subsequently, when the US was stopped, the shear viscosity returned back to the original value. In addition, the US showed different effects of the US frequency over the viscosity change in the three kinds of polysaccharides. When the US frequency was changed, the US effects were less at 83kHz and 28kHz for the shear viscosity change. In addition, as NaCl was present in the aqueous solution, the viscosity change decreased by the US exposure. These results suggest that the US effect on the viscosity reduction was influenced by the condition of polymer coil conformation, which was expanded or shrank by electrostatic repulsion of the SO3 − groups. FT-IR analysis supported that the hydrogen bonds of carrageenans were broken during the US exposure. Using Fourier self-deconvolution for the FT-IR spectra without and with US exposure suggests that the US influenced the hydrogen bonds of water and the OH group of polysaccharides. [Copyright &y& Elsevier]

Composites between carbon fibers (CFs) and heterogeneous materials have been widely researched, and fabrication techniques have been developed. However, because the CF surfaces are hydrophobic, they poorly disperse into hydrophilic resins and do not form junctions with ceramics. For designing and developing high-strength composites, it is important to investigate and design the interfacial chemical bonds. Thus, recently, research focusses on surface modification and coating techniques of CFs. In this review paper, various surface modification and coating by inorganic polymers (metal oxide compounds) were highlighted to focus the functionalization of the CF surfaces. The applications for novel composite materials was also investigated. Furthermore, the interfacial bonding techniques between CF and polymer resin for carbon fiber reinforced plastic and their future perspectives are reviewed and discussed. [ABSTRACT FROM AUTHOR]

A quartz crystal microbalance with dissipation (QCM-D) technique was employed to detecting the protein adsorption and subsequent osteoblast-like cell adhesion to hydroxyapatite (HAp) nanocrystals. The interfacial phenomena with the preadsorption of three proteins (albumin (BSA), fibronectin (Fn), and collagen (Col)), the subsequent adsorption of fetal bovine serum (FBS), and the adhesion of the cells were investigated. The QCM-D measured the frequency shift (Δf) and dissipation energy shift (ΔD), and the viscoelastic properties of the adlayers were evaluated using ΔD–Δfplot and Voigt-based viscoelastic model. The Col adsorption significantly showed higher Δf, ΔD, elasticity, and viscosity values as compared to the BSA and Fn adsorption, and the subsequent FBS adsorption depended on the preadsorbed proteins. The ΔD–Δfplot of the cell adhesion also showed a different behavior depending on the surfaces, and the Fn- and Col-modified surfaces showed the rapid mass and ΔDchanges by forming the viscous interfacial layers with cell adhesion, indicating that the processes were affected by the cellular reaction through the extracellular matrix (ECM) proteins. The confocal laser scanning microscope images of adherent cells showed a different morphology and pseudopod on the surfaces. The cells adhered to the surfaces modified with the Fn and Col had significantly uniaxially expanded shapes and fibrous pseudopods, and those modified with the BSA had a round shape. Therefore, the different cell–protein interactions would cause the arrangement of the ECM and the cytoskeleton changes at the interfaces, and these phenomena were successfully detected by the QCM-D and Voigt-based model. [ABSTRACT FROM AUTHOR]

The adhesion process of osteoblast-like cells on hydroxyapatite (HAp) and oxidized polystyrene (PSox) was investigated using a quartz crystal microbalance with dissipation (QCM-D), confocal laser scanning microscope (CLSM), and atomic force microscope (AFM) techniques in order to clarify the interfacial phenomena between the surfaces and cells. The interfacial viscoelastic properties (shear viscosity (ηad), elastic shear modulus (μad), and tan δ) of the preadsorbed protein layer and the interface layer between the surfaces and cells were estimated using a Voigt-based viscoelastic model from the measured frequency (Δf) and dissipation shift (ΔD) curves. In the ΔD–Δfplots, the cell adhesion process on HAp was classified as (1) a mass increase only, (2) increases in both mass and ΔD, and (3) slight decreases in mass and ΔD. On PSox, only ΔDincreases were observed, indicating that the adhesion behavior depended on the surface properties. The interfacial μadvalue between the material surfaces and cells increased with the number of adherent cells, whereas ηadand tanδ decreased slightly, irrespective of the surface. Thus, the interfacial layer changed the elasticity to viscosity with an increase in the number. The tan δ values on HAp were higher than those on PSox and exceeded 1.0. Furthermore, the pseudopod-like structures of the cells on HAp had periodic stripe patterns stained with a type I collagen antibody, whereas those on PSox had cell-membrane-like structures unstained with type I collagen. These results indicate that the interfacial layers on PSox and HAp exhibit elasticity and viscosity, respectively, indicating that the rearrangements of the extracellular matrix and cytoskeleton changes cause different cell–surface interactions. Therefore, the different cell adhesion process, interfacial viscoelasticity, and morphology depending on the surfaces were successfully monitored in situ and evaluated by the QCM-D technique combined with other techniques. [ABSTRACT FROM AUTHOR]

The photoassisted fusion of a decanethiol-passivated Au-nanoparticle film on a glass substrate by exposure to vacuum-ultraviolet (vacuum-UV) light at 172 nm was investigated and compared to that by thermal fusion. On the basis of the thermal treatment at 200 °C, the X-ray diffraction patterns indicated that the Au-nanoparticle film with the particle diameter of 2.1 nm is completely converted to a crystalline Au film, and the film surface was coarsely granular, having a roughness of several tens of nanometers by field emission-scanning electron microscopy observation. After exposure to vacuum-UV light, the UV−vis absorption spectra revealed that the surface plasmon band at 535 nm showed a red shift with the increasing exposure time, and then the absorption band at 770 nm was clearly observed at 30 min. The diameter of the fused Au nanoparticles was larger than 20 nm on the basis of a transmission electron microscopy observation. These changes indicated that the Au nanoparticles were converted to the crystalline state due to photodecomposition of the decanethiol. Thus, the controllable mild fusion among neighboring Au nanoparticles at room temperature was achieved by vacuum-UV-light exposure due to photodecomposition of the decanethiol. [ABSTRACT FROM AUTHOR]

The states of tris(8-quinolinato)aluminum(iii) (Alq3) adsorbed in mesoporous silicas with different pore sizes (2.5, 3.1 and 5.0 nm) were investigated. Alq3was successfully occluded into the mesoporous silicas from solution and the adsorbed amount of Alq3per BET surface area was effectively controlled by changing the added amount Alq3to the solution. The state of Alq3in the mesopore varied depending on the pore size as well as the adsorbed amount of Alq3as revealed by variation of the photoluminescence spectra. The luminescence of the adsorbed Alq3was found to be temperature-dependent, indicating the mobility of the adsorbed Alq3to temperature variations. The temperature-dependence also depended on the pore size. The guest–guest interactions between Alq3molecules as well as the host–guest interactions between Alq3and the mesopore were controlled by the pore size. [ABSTRACT FROM AUTHOR]

A supercapacitor composite electrode was effectively fabricated by using cyclic voltammetric deposition of poly(pyrrole-co-2-formylpyrrole)-multiwall carbon nanotube composite, P(Py-co-FPy)-MWCNT. The charge storage of the three-dimensional nanofibril of the P(Py-co-FPy)-coated MWCNT composite electrode was excellent and reached the specific capacitive value of up to 535 F g-1. [ABSTRACT FROM AUTHOR]

Conjugated polymers containing anthracene backbone structures were synthesized through facile chemical oxidative polymerization and showed detection capacity toward several heavy metal ions for sensitive fluorometric detection. [ABSTRACT FROM AUTHOR]

Terbium(III)-doped mesoporous silicas were synthesized, and the states of terbium ions in the silica frameworks were investigated. The mesopores were preserved upon doping at terbium ion molar concentrations relative to (Si+Tb) up to 15 mol %, indicating the interaction of terbium ions with Si–O bonds. Significant morphological changes of the particles were observed with increasing the doping concentration. The shapes of the photoluminescence spectra due to the transitions of 5D4 → 7F6 and 5D4 → 7F5 were indicative of the presence of terbium ions in the silica matrix, and the quantum efficiency (2.1–2.8%) and lifetime (1.6–1.9 ms) decreased with increasing the doping concentration up to 15 mol %. Therefore, the terbium ions are considered to be located inside the amorphous silica frameworks, where they electrostatically interact with the O atoms of silanol and siloxane groups. [ABSTRACT FROM AUTHOR]

Waste bagasse of Agave tequilana-Weber fibers treated with sodium hydroxide was used to elaborate hydrogel films. The bagasse was offered in an alternative use for the preparation of hydrogel films by phase inversion method without crosslinking and further purification of cellulose. The effect on the properties of the obtained films was studied when the chemical treatment of the agave fibers was changed. It was found that the resultant hydrogels showed increment in tensile from 40 N/mm² to 56 N/mm² with the increase of sodium hypochlorite concentration from 1 to 10 vol.%, respectively. With regard to biocompatibility properties of the hydrogel films, platelet adhesion, clotting time and protein adsorption were investigated. Analysis of the morphology of adherent NIH3T3 fibroblast indicated that the projected cell area, aspect ratio and long axis gradually increased with the increment of sodium hypochlorite content in the agave treatment. It was presented that the chemical treatment affects cell adhesion and morphology and lignin content remains in the brown fibers. [ABSTRACT FROM AUTHOR]

This paper reviews the recent progress in the preparation of oxide-based and heteroatom-doped particles. Surfactant-templated oxide particles, e.g. silica and titania, are possible candidates for various potential applications such as adsorbents, photocatalysts, and optoelectronic and biological materials. We highlight nanoporous oxides of one element, such as silicon or titanium, and those containing multiple elements, which exhibit properties that are not achieved with individual components. Although the multicomponent nanoporous oxides possess a number of attractive functions, the origin of their properties is hard to determine due to compositional/structural complexity. Particles with a well-defined size and shape are keys for a quantitative and detailed discussion on the unique complex properties of the particles. From this viewpoint, we review the synthesis techniques of the oxide particles, which are functionalized with organic molecules or doped with heteroatoms, the physicochemical properties of the particles and the possibilities for their photofunctional applications as complex systems.