Search

Poly(ether ether ketone) (PEEK) was found to form gels in the benign solvent 1,3-diphenylacetone (DPA). Gelation of PEEK in DPA was found to form an interconnected, strut-like morphology composed of polymer axialites. To our knowledge, this is the first report of a strut-like morphology for PEEK aerogels. PEEK/DPA gels were prepared by first dissolving PEEK in DPA at 320 °C. Upon cooling to 50 °C, PEEK crystallizes and forms a gel in DPA. The PEEK/DPA phase diagram indicated that phase separation occurs by solid–liquid phase separation, implying that DPA is a good solvent for PEEK. The Flory–Huggins interaction parameter, calculated as χ12 = 0.093 for the PEEK/DPA system, confirmed that DPA is a good solvent for PEEK. PEEK aerogels were prepared by solvent exchanging DPA to water then freeze-drying. PEEK aerogels were found to have densities between 0.09 and 0.25 g/cm3, porosities between 80 and 93%, and surface areas between 200 and 225 m2/g, depending on the initial gel concentration. Using nitrogen adsorption analyses, PEEK aerogels were found to be mesoporous adsorbents, with mesopore sizes of about 8 nm, which formed between stacks of platelike crystalline lamellae. Scanning electron microscopy and X-ray scattering were utilized to elucidate the hierarchical structure of the PEEK aerogels. Morphological analysis found that the PEEK/DPA gels were composed of a highly nucleated network of PEEK axialites (i.e., aggregates of stacked crystalline lamellae). The highly connected axialite network imparted robust mechanical properties on PEEK aerogels, which were found to densify less upon freeze-drying than globular PEEK aerogel counterparts gelled from dichloroacetic acid (DCA) or 4-chlorphenol (4CP). PEEK aerogels formed from DPA were also found to have a modulus–density scaling that was far more efficient in supporting loads than the poorly connected aerogels formed from PEEK/DCA or PEEK/4CP solutions. The strut-like morphology in these new PEEK aerogels also significantly improved the modulus to a degree that is comparable to high-performance crosslinked aerogels based on polyimide and polyurea of comparable densities. [ABSTRACT FROM AUTHOR]

This manuscript describes the synthesis and characterization of guanine and cytosine‐containing supramolecular copolymers, which are inspired from the guanine and cytosine nucleobase pair in deoxyribonucleic acid. Regioselective Michael‐addition allowed the efficient installation of the nucleobases on acrylate‐containing monomers, which enabled the preparation of a series of nucleobase‐functionalized acrylate and n‐butyl acrylate copolymers using conventional free radical copolymerization. Guanine‐containing copolymers exhibited superior thermal properties, thermomechanical performance, and more defined morphological structure than cytosine‐containing copolymer analogs due to the relatively strong guanine self‐association, thus expanding the potential applications for mechanically reinforced polymeric networks. Blending guanine‐ and cytosine‐containing copolymers formed a supramolecular structure through multiple hydrogen bonding between guanine and cytosine units. The supramolecular blend exhibited intermediate thermomechanical and morphological properties, which suggested that guanine and cytosine units were not fully associated in the random copolymer composition. This work provides valuable fundamental understanding of structure–property‐morphology relationships in acrylic copolymers with the presence of guanine‐cytosine self‐ and complementary interactions, suggesting new understanding in supramolecular design for enhanced mechanical and morphological properties. [ABSTRACT FROM AUTHOR]

In an effort to synthesize chemically recyclable thermoplastic elastomers, a redox‐switchable catalytic system was developed to synthesize triblock copolymers containing stiff poly(lactic acid) (PLA) end blocks and a flexible poly(tetrahydrofuran‐co‐cyclohexene oxide) (poly(THF‐co‐CHO) copolymer as the mid‐block. The orthogonal reactivity induced by changing the oxidation state of the iron‐based catalyst enabled the synthesis of the triblock copolymers in a single reaction flask from a mixture of monomers. The triblock copolymers demonstrated improved flexibility compared to poly(l‐lactic acid) (PLLA) and thermomechanical properties that resemble thermoplastic elastomers, including a rubbery plateau in the range of −60 to 40 °C. The triblock copolymers containing a higher percentage of THF versus CHO were more flexible, and a blend of triblock copolymers containing PLLA and poly(d‐lactic acid) (PDLA) end‐blocks resulted in a stereocomplex that further increased polymer flexibility. Besides the low cost of lactide and THF, the sustainability of this new class of triblock copolymers was also supported by their depolymerization, which was achieved by exposing the copolymers sequentially to FeCl3 and ZnCl2/PEG under reactive distillation conditions. [ABSTRACT FROM AUTHOR]

A systematic investigations on the effect of sulfonic acid additives for the fabrication of thermally stable sulfonated poly(arylene ether sulfone) (PAES) composites for proton exchange membranes fuel cell applications were carried out. A uniform microstructure containing different concentration (1, 5 and 10 vol.%) of aromatic sulfonic acid additives (aniline‐2‐sulfonic acid (ASA), 3‐aminobenzenesulfonic acid (ABSA) and 3‐amino‐4‐hydroxy‐benzenesulfonic acid (AHBSA)) and biphenol‐based disulfonated poly(arylene ether sulfone) copolymer (PAES) as the matrix were successfully prepared. Phase segregation of the additives with sizes ranging from 1 to 2 μm was confirmed using scanning electron microscopy (SEM). Both thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) confirmed that additive derived PAES were thermally stable up to 400 °C. Proton conductivity of ASA‐PAES membranes was found to increase gradually with ASA concentration. Among all membranes PAES‐10 %ASA exhibited the highest conductivity of 0.123±0.01 S⋅cm−1 at 100 % relative humidity. However, PAES‐1 %ASA and PAES‐10 %ABSA membranes demonstrated the lowest leaching. Water uptake, ion exchange capacity and leaching parameters were correlated to additive concentration. This study will serve as a guide for the fabrication of PAES membranes with high concentration of sulfonated group in the polymer chain with enhanced thermal stability and proton conductivity. [ABSTRACT FROM AUTHOR]