Search

In modern railway traffic systems, direct current (DC) electrification is a prevalent choice, with numerous traction networks adopting a variety of voltage levels to accommodate varying load current dynamics. These dynamics are influenced by passenger density, aggregate demand for electrical power, headways, and frequency of locomotive operations. Load currents are prone to surges during periods of dense traffic and transient phases such as acceleration, deceleration, and the start–stop sequences of trains. Such surges hold the potential to precipitate fault currents within the traction system, which are similar to those engendered by external anomalies. Conventional protection systems, such as the Détection Défaut Ligne’—French for ’Line Fault Detection), may not always effectively identify remote faults or prolonged overcurrent situations. These scenarios necessitate an advancement beyond the traditional fault detection methodologies, which primarily rely on fixed thresholds and may not account for the dynamic nature of the railway system’s electrical load. This paper addresses the limitations inherent in the existing DDL protection mechanisms by focusing on the feeder attributes specific to the DC Traction System. In pursuit of this objective, we introduce an innovative adaptive current DDL algorithm to refine the rigid threshold paradigm inherent in the conventional approach. To facilitate a pragmatic assessment, the Rapid Rail network of Malaysia serves as a reference for emulating the railway’s electrical system. This comprehensive analysis yields insights that are potentially useful for safety protocols in DC electrified railroad traffic systems.

In this research, prediction of crude oil cuts from the first stage of refining process field is laid out using rough set theory (RST) based adaptive neuro-fuzzy inference system (ANFIS) soft sensor model to enhance the performance of oil refinery process. The RST was used to reduce the fuzzy rule sets of ANFIS model, and its features in the decision table. Also, discretisation methods were used to optimise the continuous data’s discretisation. This helps to predict the two critical variables of light naphtha product: Reid Vapor Pressure (RVP) and American Petroleum Institute gravity (API gravity), which detect the cut’s quality. Hence, a real-time process of Al Doura oil refinery is examined and the process data of refining crude oil from these two sources improve the knowledge provided by the data. The response variables represent the feedback measured value of cascade controller in the top of the splitter in crude distillation unit (CDU) in the rectifying section, which controls the reflux liquid’s flow towards the splitter’s head. The proposed adaptive soft sensor model succeeded to fit the results from laboratory tests, and a steady-state control system was achieved through an embedded virtual sensor. The predictive control system has been employed using cascade ANFIS controller in parallel with the soft sensor model to keep the purity of the distillate product in the stated range of the quality control of oil refinery. The results obtained from the proposed ANFIS based cascade control have no over/undershoots, and the rise time and settling time are improved by 26.65% and 84.63%, respectively than the conventional proportional-integral-derivative (PID) based cascade control. Furthermore, the results of prediction and control model are compared with those of other machine learning techniques.

Solar Photovoltaic (PV) system is one of the most significant forms of renewable energy resources, and it requires accuracy to assess, design, and extraction of its parameters. Several methods have been extensively applied to mimic the nonlinearity and multi-model behavior of the PV system. However, there is no method to date that can guarantee the extracted parameter of the PV model is the most accurate one. Therefore, this paper presents a unique approach known as Hybridized Arithmetic Operation Algorithm based on Efficient Newton Raphson (HAOAENR) to experimentally extract the parameters of the single-diode and double-diode PV models at the variability of the climatic changes. Firstly, the objective function is efficiently designed to roughly predict the initial root values of the PV equation. Secondly, the Lévy flight and Brownian strategies are integrated in the four operators of AOA to thoroughly analyze the feature space of this problem. Additionally, the four operators of the AOA is divided into two phases to equilibrium between the exploration and exploitation tendencies. Furthermore, the chaotic map and robust mutation techniques are systematically employed in the beginning and halves of generations to ensure the algorithm can reach globally at few numbers iterations. Finally, a nonlinearly adjustable damping parameter of the Levenberg-Marquardt technique is linked with the NR method to replicate the fluctuation behaviours of the PV models. The experimental findings revealed that the proposed HAOAENR outperformed all other methods found in the literature, with average RMSE values close to zero values for both PV models.

Modern power utilization has been forced to operate close to their stability limits, which may lead to voltage instability or collapse owing to the stressed operating conditions of networks. This raises the need to develop a new technique to predict the level of voltage security under different operating conditions to detect critical lines or buses that operate close to its stability limit. This study proposes a new line voltage stability index (BVSI) to identify weak lines and buses for various loading conditions and network configurations. Comparative studies between the existing voltage stability indices (VSIs) and the proposed index have been performed to comprehensively highlight the indices’ foundation, performance, and overall behavior for several different IEEE benchmark test systems; 14-bus, 30-bus, 118-bus test systems and 33-bus radial distribution system. The sensitivity towards different loading conditions due to variables such as active power, reactive power, angular difference between sending and receiving bus voltage, line resistance, and shunt admittance, which have been neglected in the formulation of VSIs, are briefly discussed. The findings of this work are aimed to provide a general guideline for other researchers in selecting the appropriate VSIs for various applications, particularly in solving optimization problems such as distributed generation (DG) and reactive power compensation (RPC) placement, optimal power flow, optimal reactive power dispatch, optimal network reconfiguration for various loading occasions, and different networks. Lastly, the application of the proposed index has been adopted as an analytical approach for solving optimal location and sizing of DG(s) problems. The results prove the effectiveness of the proposed index in accessing the voltage stability state and stress condition of lines. Besides, the proposed approach also capable of determining the potential candidate bus for single DG location and sizing effectively.

The communication requirement for integrating Distributed Renewable Generation (DRG) into Smart Grid (SG) is not strict, where the reliability and critical demand of data delivery are compromised due to the low-data rate and power of ZigBee. However, the presence of various dielectric constant materials in the DRG can cause transmission impairments of the electromagnetic wave. In this paper, we have analysed the performance of the ZigBeePRO network by applying the shortest path algorithm while delivering energy data from the solar DRG to the SG. The DRG architecture is created by considering a real test-bed of 35 kW solar DRG at Universiti Putra Malaysia (UPM). The numbers of nodes are calculated from specifications of the ZigBeePRO enabled Waspmote embedded board, inverters, and electrical parameters of a Photovoltaic (PV) module. The results of the obtained propagation path loss model indicate that the Transverse Electric (TE) and Transverse Magnetic (TM) polarizations are proportional to the loss of the propagation path at different incident angles (α); however, an exception is observed for the TM polarization at α = 55 o. Due to this polarization effect, the brick-built type cabin at the DRG site is a consequence of a higher propagation path loss than the Iron (III)-made cabin. The other performance parameters, including network throughput, data loss, and ZigBeePRO collision, are also evaluated.

Standalone photovoltaic (PV) systems are crucial for providing reliable, cost-effective, and sustainable energy to remote or off-grid locations with limited or no access to the traditional electrical grid. In this context, the sizing of a standalone PV system for a remote health clinic involves determining the clinic’s power requirements and matching them with an appropriate PV system’s capacity. Maximum power point tracking (MPPT) is a critical aspect of standalone PV systems, as it optimizes the PV system’s power output by adjusting the PV array’s operating point to the maximum power point (MPP) of the PV module. However, the non-linear behavior of PV systems due to exposure to changing climate conditions and partial shading can hide some faults, making traditional protection devices incapable of detecting them. Therefore, the design of an optimal simulation model of a properly sized standalone PV system is important for simulating and collecting the necessary data to diagnose faults. In this study, a standalone PV system for a hypothetical clinic in Malaysia is proposed, and it is sized based on peak sun hours. Its simulation model is built using MATLAB/Simulink (R2018b). The proposed simulation system’s performance was evaluated considering the proper design of the PV system’s boost converter within the changing conditions, and its ability to harvest maximum power points is considered a criterion for evaluating the performance. Various scenarios of uniform irradiance, uniform temperatures, shading effects, and sequential partial shading scenarios were implemented to evaluate the proposed simulation model. Results show that the proposed simulation model is suited to simulating different tests as it can harvest maximum power in all test scenarios.

The concept of introducing hybrid off-grid systems has made electricity accessible to areas that are far or have no access to grid network. This paper evaluates the techno-economic and environmental characteristics of a hybrid renewable energy system considering three different scheduling approaches, four different solar tracking systems, two different PV modules and eight scheduling scenarios to supply sustainable electricity to a rural community in Sierra Leone. Each scenario consists of a solar tracking system, a specific type of PV module and a scheduling approach. The aim is to find the most efficient and cost-effective scenario that meets the electrical demands of the village. Results revealed that the ‘Two axis tracking system’ generated the highest PV power, 28.8% additional power compared to the ‘No tracking system’ confirming the superiority of using a tracking system though it comes with initial cost repercussions. Also, systems that employed the use of Canadiasolar Dymond CS6K-285M-FG PV module tend to be more efficient and cost-effective than those that employed Sharp ND-250QCS PV module even with the same solar tracking technology and scheduling approach. From the best scheduling approach (third scheduling), Scenario 7 (SC#7) gives the lowest net present cost (NPC) of $ \$ $ 1.53M with $ \$ $ 0.173/kWh cost of energy (COE) and CO2 emission of 8.54 kg/yr making it the optimum scenario. A daily operation of the optimum scenario on both a sunny and rainy day confirms that the system is capable of supplying the required electricity for both rainy and dry seasons. Sensitivity analyses explain the high reliance of the system cost on the erratic inflation rate, discount rate and PV derating factor. Maintaining a healthy and sustainable environment depends on the minimum load ratio of both the biogas and diesel generators.

This paper presents the detection of High Impedance Fault (HIF) in solar Photovoltaic (PV) integrated power system using recurrent neural network-based Long Short-Term Memory (LSTM) approach. For study this, an IEEE 13-bus system was modeled in MATLAB/Simulink environment to integrate 300 kW solar PV systems for analysis. Initially, the three-phase current signal during non-faulty (regular operation, capacitor switching, load switching, transformer inrush current) and faulty (HIF, symmetrical and unsymmetrical fault) conditions were used for extraction of features. The signal processing technique of Discrete Wavelet Transform with db4 mother wavelet was applied to extract each phase's energy value features for training and testing the classifiers. The proposed LSTM classifier gives the overall classification accuracy of 91.21% with a success rate of 92.42 % in identifying HIF in PV integrated power network. The prediction results obtained from the proffered method are compared with other well-known classifiers of K-Nearest neighbor's network, Support vector machine, J48 based decision tree, and Naïve Bayes approach. Further, the classifier's robustness is validated by evaluating the performance indices (PI) of kappa statistic, precision, recall, and F-measure. The results obtained reveal that the proposed LSTM network significantly outperforms all PI compared to other techniques.

Low frequency oscillations (LFOs) occur in a system of interconnected generators connected by weak interconnection. A power system stabilizer (PSS) is commonly used to improve the capacity of the power system dampening. Under a variety of operating conditions, traditional PSSs fail to deliver superior damping. To address this issue, a Farmland Fertility Algorithm (FFA-PSSs controller) was used to solve an optimization problem for optimal design of PSSs system parameters, and its performance efficiency was compared to GA and PSO-based PSSs controllers. In addition to PSS, flexible current transmission (FACTS) devices are widely used. PSSs controllers and FACTS devices are frequently constructed in tandem to improve the dampening efficiency of the system. In this study, an Interline Power Flow Controller (IPFC) FACTS device will be added to the PSSs controller to improve the power system’s oscillatory stability. PSSs optimal design and supplemental controller of power fluctuations for IPFC were conducted out on WSCC multi-machine test systems using a system linear model. Using time-domain simulations and quantitative analysis, the proposed IPFC model was compared to the FFA-PSSs controller in terms of performance and efficiency. The main disadvantage of this technique is the difficulty in designing a dynamic IPFC model in test systems, as well as the burden of IPFC coordinated PSSs optimization. In both PSSs design using FFA method and FFA-optimized PSS with IPFC cases, rise in the computational and simulation costs was found unavoidable. To compensate for these flaws and obtain the research contribution, this paper proposes a Neuro-Fuzzy Controller (NFC) developed as a damping controller that can take the place of the two controllers (research objectives three). The application of the NFC substitute the computational and simulation cost involved in designing multi-machine PSS and IPFC-FACTS systems simultaneously. With the availability of NFC in SIMULINK, a dynamic model of the WSCC three-machine system was developed under a variety of operating situations. Quantitative analysis results from the WSCC test system simulation show that when comparing the proposed NFC model to the IPFC model for the WSCC test system, the proposed NFC model was found to be 149 percent and 0 percent efficient in terms of the time to settle of rotor angle respond for G2 and G3, respectively, but 394 percent efficient when compared to the uncontrolled model. The decreased settling time values ensured the proposed NFC model’s efficacy in damping down the LFO and achieving superior stability over the two controllers. The proposed NFC model has shown significant performance improvement in both the transient and steady-state areas than when the system was design with the two damping controllers.

This study describes the process of interconnected multi-machine power system stabilizer (PSS) optimization using a new intelligent technique called farmland fertility algorithm (FFA) to increase the stability of IEEE three machine nine bus power system and offset the low-frequency oscillations (LFOs) during a symmetrical 100 ms three-phase fault at bus 9. The FFA-PSS controller performance is compared with two familiar classical techniques, i.e. Genetic Algorithm (GA-PSS) and Particle Swarm Optimization (PSO-PSS) to confirm the capability of the proposed technique to realize improved system stability enhancement. The Eigenvalue simulation results with FFA produce stable Eigenvalues that increase the damping ratio of the Electromechanical Modes (EMs) to more than 0.1 with smaller overshoots and time to settle which shows the effectiveness of the method for multi-machine stability improvement. Also, the phasor simulation results show that the transient responses of the system rise time, settling time, peak time and peak magnitude were all impressively improved by an acceptable amount for the interconnected system with the proposed FFA-PSS thus, was able to control the LFOs effectively and produces enhanced performance compared to the GA and PSO based PSS. Similarly, the result validates the effectiveness of the proposed FFA tuned PSS for LFO control which demonstrates robustness, efficiency, and convergence speed ability than the classical GA and PSO tuning methods.

This paper presents the automatic load frequency control (ALFC) of two-area multisource hybrid power system (HPS). The interconnected HPS model consists of conventional and renewable energy sources operating in disparate combinations to balance the generation and load demand of the system. In the proffered work, the stability analysis of nonlinear dynamic HPS model was analyzed using the Hankel method of model order reduction. Also, an attempt was made to apply cascade proportional integral - proportional derivative (PI-PD) control for HPS. The gains of the controller were optimized by minimizing the integral absolute error (IAE) of area control error using particle swarm optimization-gravitational search algorithm (PSO-GSA) optimization technique. The performance of cascade control was compared with other classical controllers and the efficiency of this approach was studied for various cases of HPS model. The result shows that the cascade control produced better transient and steady state performances than those of the other classical controllers. The robustness analysis also reveals that the system overshoots/undershoots in frequency response pertaining to random change in wind power generation and load perturbations were significantly reduced by the proposed cascade control. In addition, the sensitivity analysis of the system was performed, with the variation in step load perturbation (SLP) of 1% to 5%, system loading and inertia of the system by ±25% of nominal values to prove the efficiency of the controller. Furthermore, to prove the efficiency of PSO-GSA tuned cascade control, the results were compared with other artificial intelligence (AI) methods presented in the literature. Further, the stability of the system was analyzed in frequency domain for different operating cases.

With the modernization of power grids, the network optimal utilization is essential to ensure that voltage profile at each bus is maintained within an acceptable range, voltage stability of the system is enhanced, power losses in lines are minimized, reliability and security of system are improved and etc. These can be achieved by introducing reactive power compensation devices such as Flexible Alternating Current Transmission System (FACTS) devices, Custom Power (CP) devices, synchronous condenser, capacitor bank and etc in distribution or transmission networks. Optimal location and sizing of the reactive power compensation devices are significantly important to ensure sufficient investment onto this device. Recently, most of conducted studies had focused on the techniques for determining the optimal location and sizing of various reactive power compensation devices in the power system using various indices proposed in the literature to access the power loss, voltage stability, voltage profile and line loadability. However, no review paper had discussed on the application of the existing indices adopted in the available techniques for solving the optimal location and sizing problems for all types of reactive power compensation devices. In this paper, current literature survey on optimal location and sizing of reactive power compensations had been discussed which includes analytical, conventional, metaheuristic and hybrid based approaches. The main objectives are to reduce power losses, to mitigate voltage deviations, to increase voltage stability and to improve reliability and security of the system.

This study proposes SVM based Random Subspace (RS) ensemble classifier to discriminate different Power Quality Events (PQEs) in a photovoltaic (PV) connected Microgrid (MG) model. The MG model is developed and simulated with the presence of different PQEs (voltage and harmonic related signals and distinctive transients) in both on-grid and off-grid modes of MG network, respectively. In the pre-stage of classification, the features are extracted from numerous PQE signals by Discrete Wavelet Transform (DWT) analysis, and the extracted features are used to learn the classifiers at the final stage. In this study, first three Kernel types of SVM classifiers (Linear, Quadratic, and Cubic) are used to predict the different PQEs. Among the results that Cubic kernel SVM classifier offers higher accuracy and better performance than other kernel types (Linear and Quadradic). Further, to enhance the accuracy of SVM classifiers, a SVM based RS ensemble model is proposed and its effectiveness is verified with the results of kernel based SVM classifiers under the standard test condition (STC) and varying solar irradiance of PV in real time. From the final results, it can be concluded that the proposed method is more robust and offers superior performance with higher accuracy of classification than kernel based SVM classifiers.

This study presents a nature-inspired, and metaheuristic-based Marine predator algorithm (MPA) for solving the optimal power flow (OPF) problem. The significant insight of MPA is the widespread foraging strategy called the Levy walk and Brownian movements in ocean predators, including the optimal encounter rate policy in biological interaction among predators and prey which make the method to solve the real-world engineering problems of OPF. The OPF problem has been extensively used in power system operation, planning, and management over a long time. In this work, the MPA is analyzed to solve the single-objective OPF problem considering the fuel cost, real and reactive power loss, voltage deviation, and voltage stability enhancement index as objective functions. The proposed method is tested on IEEE 30-bus test system and the obtained results by the proposed method are compared with recent literature studies. The acquired results demonstrate that the proposed method is quite competitive among the nature-inspired optimization techniques reported in the literature.

This paper proposes an alternative approach to extract transformer's winding parameters of resistance (R), inductance (L), capacitance (C) and conductance (G) based on Finite Element Method (FEM). The capacitance and conductance were computed based on Fast Multiple Method (FMM) and Method of Moment (MoM) through quasi-electrostatics approach. The AC resistances and inductances were computed based on MoM through quasi-magnetostatics approach. Maxwell's equations were used to compute the DC resistances and inductances. Based on the FEM computed parameters, the frequency response of the winding was obtained through the Bode plot function. The simulated frequency response by FEM model was compared with the simulated frequency response based on the Multi-conductor Transmission Line (MTL) model and the measured frequency response of a 33/11 kV, 30 MVA transformer. The statistical indices such as Root Mean Square Error (RMSE) and Absolute Sum of Logarithmic Error (ASLE) were used to analyze the performance of the proposed FEM model. It is found that the simulated frequency response by FEM model is quite close to measured frequency response at low and mid frequency regions as compared to simulated frequency response by MTL model based on RMSE and ASLE analysis.

In this paper, a novel, effective meta-heuristic, population-based Hybrid Firefly Particle Swarm Optimization (HFPSO) algorithm is applied to solve different non-linear and convex optimal power flow (OPF) problems. The HFPSO algorithm is a hybridization of the Firefly Optimization (FFO) and the Particle Swarm Optimization (PSO) technique, to enhance the exploration, exploitation strategies, and to speed up the convergence rate. In this work, five objective functions of OPF problems are studied to prove the strength of the proposed method: total generation cost minimization, voltage profile improvement, voltage stability enhancement, the transmission lines active power loss reductions, and the transmission lines reactive power loss reductions. The particular fitness function is chosen as a single objective based on control parameters. The proposed HFPSO technique is coded using MATLAB software and its effectiveness is tested on the standard IEEE 30-bus test system. The obtained results of the proposed algorithm are compared to simulated results of the original Particle Swarm Optimization (PSO) method and the present state-of-the-art optimization techniques. The comparison of optimum solutions reveals that the recommended method can generate optimum, feasible, global solutions with fast convergence and can also deal with the challenges and complexities of various OPF problems.

This study presents an investigation on the effect of shield placement for mitigation of transient voltage in a 33/11 kV, 30 MVA transformer due to Standard Switching Impulse (SSI) and Oscillating Switching Impulse (OSI) surges. Generally, the winding and insulation in transformers could experience severe voltage stress due to the external impulses i.e. switching events. Hence, it is important to examine the voltage stress and identify the mitigation action i.e. shield placements in order to reduce the adverse effect to the transformer windings. First, the resistances, inductances, and capacitances (RLC) were calculated for disc type transformer in order to develop the winding RLC equivalent circuit. The SSI and OSI transient voltage waveforms were applied to the High Voltage (HV) winding whereby the transient voltages were simulated for each disc. The resulting voltage stresses were mitigated through different configurations of electrostatic shield placements. The resonant oscillations generated due to switching surges were analysed through initial voltage distribution. The analyses on the transient voltages of the transformer winding and standard error of the slope (SEb) reveal that the location of shield placement has a significant effect on the resonant switching voltages. The increment of the shield number in the windings does not guarantee optimize mitigation of the resonant switching transient voltages. It is found that the voltage stress along the windings is linear once a floating shield is placed between the HV and Low Voltage (LV) windings of the disc-type transformer under the SSI and OSI waveforms. These findings could assist the manufacturers with appropriate technical basis for mitigation of the transformer winding against the external transient switching overvoltage surges.

This study analyzes the performance of two PV modules, amorphous silicon (a-Si) and crystalline silicon (c-Si) and predicts energy yield, which can be seen as facilitation to achieve the target of 35% reduction of greenhouse gases emission by 2030. Malaysia Energy Commission recommends crystalline PV modules for net energy metering (NEM), but the climate regime is a concern for output power and efficiency. Based on rainfall and irradiance data, this study aims to categorize the climate of peninsular Malaysia into rainy and dry seasons; and then the performance of the two modules are evaluated under the dry season. A new mathematical model is developed to predict energy yield and the results are validated through experimental and systematic error analysis. The parameters are collected using a self-developed ZigBeePRO-based wireless system with the rate of 3 samples/min over a period of five days. The results unveil that efficiency is inversely proportional to the irradiance due to negative temperature coefficient for crystalline modules. For this phenomenon, efficiency of c-Si (9.8%) is found always higher than a-Si (3.5%). However, a-Si shows better shadow tolerance compared to c-Si, observed from a lesser decrease rate in efficiency of the former with the increase in irradiance. Due to better spectrum response and temperature coefficient, a-Si shows greater performance on output power efficiency (OPE), performance ratio (PR), and yield factor. From the regression analysis, it is found that the coefficient of determination (R2) is between 0.7179 and 0.9611. The energy from the proposed model indicates that a-Si yields 15.07% higher kWh than c-Si when luminance for recorded days is 70% medium and 30% high. This study is important to determine the highest percentage of energy yield and to get faster NEM payback period, where as of now, there is no such model to indicate seasonal energy yield in Malaysia.

Islanding detection needs are becoming a pivotal constituent of the power system, since the penetration of distributed generators in the utility power system is continually increasing. Accurate threshold setting is an integral part of the island detection scheme since an inappropriate threshold might cause a hazardous situation. This study looked at the islanding conditions as well as two transient faults, such as a single line to ground fault and a three-phase balance fault, to assess the event distinguishing ability of the proposed method. Therefore, the goal of this research was to determine the threshold of the island if the distributed generator (DG) capacity is greater than the connected feeder load, which is the over-frequency island condition, and if the DG capacity is less than the connected feeder load, which is the under-frequency island condition. The significance of this research work is to propose a new island detection threshold setting method using the slip angle and acceleration angle that comes from phasor measurement unit (PMU) voltage angle data. The proposed threshold setting method was simulated in the PowerWorld simulator on a modified IEEE 30 bus system equipped with DG. There are three different interconnection scenarios in the test system and the performance of the proposed method shows that getting the island threshold for all the scenarios requires a single time step or 20 mile seconds after incepting an island into the network. In addition, it can distinguish between the real islanding threshold and the transient faults threshold.

Photovoltaic (PV) systems encounter substantial losses throughout their lifespan due to the different derating factors of PV modules. Those factors mainly vary according to the geographical location and PV panel characteristics. However, the available literature does not explicitly concentrate on the technical and economic impact of the derating factors within the PV system. Owing to that necessity, this study performs a comprehensive analysis of various PV loss parameters followed by a techno-economic assessment of derating factors using the average value on a grid-connected and optimally tilted PV system located in Hatiya, Bangladesh. Some criteria linked to the derating factors such as PV degradation and ambient temperature are further explored to analyze their impact on the aforementioned power system. Simulation results show that PV power generation would vary around 12% annually, subject to a 10% variation in the derating factor. Again, a 10% difference in the derating factor changes the net present cost (NPC) by around 3% to 4%. The system provides the best technical performance concerning annual PV production, power trade with the grid, and the renewable fraction at a higher value of the derating factor since it represents a lower impact of the loss parameters. Similarly, the financial performance in terms of the NPC, levelized cost of energy (LCOE), and grid power exchange cost is found to be lower when the derating factor value is higher.

In this paper, a multi-objective hybrid firefly and particle swarm optimization (MOHFPSO) was proposed for different multi-objective optimal power flow (MOOPF) problems. Optimal power flow (OPF) was formulated as a non-linear problem with various objectives and constraints. Pareto optimal front was obtained by using non-dominated sorting and crowding distance methods. Finally, an optimal compromised solution was selected from the Pareto optimal set by applying an ideal distance minimization method. The efficiency of the proposed MOHFPSO technique was tested on standard IEEE 30-bus and IEEE 57-bus test systems with various conflicting objectives. Simulation results were also compared with non-dominated sorting based multi-objective particle swarm optimization (MOPSO) and different optimization algorithms reported in the current literature. The achieved results revealed the potential of the proposed algorithm for MOOPF problems.

This paper presents the methodology to detect and identify the type of fault that occurs in the shunt compensated static synchronous compensator (STATCOM) transmission line using a combination of Discrete Wavelet Transform (DWT) and Naive Bayes (NB) classifiers. To study this, the network model is designed using Matlab/Simulink. Different types of faults, such as Line to Ground (LG), Line to Line (LL), Double Line to Ground (LLG) and the three-phase (LLLG) fault, are applied at disparate zones of the system, with and without STATCOM, considering the effect of varying fault resistance. The three-phase fault current waveforms obtained are decomposed into several levels using Daubechies (db) mother wavelet of db4 to extract the features, such as the standard deviation (SD) and energy values. Then, the extracted features are used to train the classifiers, such as Multi-Layer Perceptron Neural Network (MLP), Bayes and the Naive Bayes (NB) classifier to classify the type of fault that occurs in the system. The results obtained reveal that the proposed NB classifier outperforms in terms of accuracy rate, misclassification rate, kappa statistics, mean absolute error (MAE), root mean square error (RMSE), percentage relative absolute error (% RAE) and percentage root relative square error (% RRSE) than both MLP and the Bayes classifier.

This paper presents the application of IEC 61850 protocol in electrical power engineering industry for data communication systems between substations. This IEC 61850 protocol presents new challenges for real-time communication performance between Intelligent Electronic Devices (IEDs) within substation because of the Generic Object Oriented Substation Event (GOOSE) messages. The analyses of substation Ethernet and WLAN (wireless LAN) communication delay, its impact factors, various methods and different network topologies which can improve the real-time performance are discussed. For basic analysis of data flow within a substation, the Optimized Network Engineering Tool (OPNET) software is used. The process-to-bay level network simulation model is performed by using the OPNET software. The Ethernet delay and WLAN peer-to-peer performance of the process-to-bay level network simulation results are analyzed which is based on AP (access point), switched, shared Ethernet network or peer-to-peer network.

Operation of a power system close to the voltage stability limit due to increasing of load demand and limited power sources may result in disastrous economic loss with voltage collapse of the entire power system. A system operator has to understand how far the system is from the critical boundary of the voltage collapse. This paper investigated the influence of State Estimation (SE) in the calculation of the Critical Boundary Index (CBI) as a voltage stability index. For SE, Hybrid State Estimation (HSE), including the measurement set of both Remote Terminal Unit (RTU) in Supervisory Control and Data Acquisition (SCADA) and Phasor Measurement Unit (PMU), is employed. Concurrently, the CBI is estimated using voltage phasor estimated by HSE based on optimal PMU location, which is selected from a Pareto optimal front obtained by the Non-dominated Sorting Genetic Algorithm II (NSGA-II). As a result of CBI estimation, HSE using PMU is relatively accurate in voltage stability index estimation compared to SCADA SE, which uses the RTU alone. However, when a mixed measurement condition in some lines affects the CBI estimation, it is suggested that it may be necessary to discard PMU measurements in some cases.

A new protection scheme based on applying a combination of wavelet multi-resolution singular spectrum entropy and support vector machine is proposed to identify different types of grid faults in a three-phase grid-tied photovoltaic system. In this technique, discrete wavelet transform with multi-resolution singular spectrum entropy is utilized to extract the unique features of three-phase voltage signals at the point of common coupling. The three-phase voltage signals are decomposed to provide detail and approximation coefficients of wavelet transform. Then, various features between different types of grid faults can be extracted by a combination of multi resolution analysis and spectrum analysis with entropy as the output. The constructed features vector is utilized as input data of a support vector machine classifier to identify and classify various types of faults. The results illustrate that the proposed intelligent technique not only recognizes different types of grid faults correctly, but also performs quickly in identifying grid faults in a grid-connected photovoltaic system. Apart from this, a graphical investigation is executed to observe the effects of different types of grid faults in photovoltaic (PV) operation which highlight the necessity of intelligent protection methods to protect PV systems.

This paper presents an investigation on the resonant oscillations of an 11 kV layer-type winding transformer under standard and chopped lightning impulse overvoltage conditions based on calculated parameters. The resistances, inductances and capacitances were calculated in order to develop the transformer winding equivalent circuit. The impulse overvoltages were applied to the high voltage (HV) winding and the resonant oscillations were simulated for each of the layers based on different electrostatic shield placement configurations. It is found that the placement of grounded shields between layer 13 and layer 14 results in the highest resonant oscillation and non-linear initial voltage distribution. The oscillation and linear stress distributions are at the lowest for shield placement between the HV and low voltage (LV) windings.

This paper presents a method to detect and classify the high impedance fault that occur in the medium voltage (MV) distribution network using discrete wavelet transform (DWT) and adaptive neuro-fuzzy inference system (ANFIS). The network is designed using MATLAB software R2014b and various faults such as high impedance, symmetrical and unsymmetrical fault have been applied to study the effectiveness of the proposed ANFIS classifier method. This is achieved by training the ANFIS classifier using the features (standard deviation values) extracted from the three-phase fault current signal by DWT technique for various cases of fault with different values of fault resistance in the system. The success and discrimination rate obtained for identifying and classifying the high impedance fault from the proffered method is 100% whereas the values are 66.7% and 85% respectively for conventional fuzzy based approach. The results indicate that the proposed method is more efficient to identify and discriminate the high impedance fault from other faults in the power system.

This paper proposes a new islanding detection technique based on the combination of a wavelet packet transform (WPT) and a probabilistic neural network (PNN) for grid-tied photovoltaic systems. The point of common coupling (PCC) voltage is measured and processed by the WPT to find the normalized Shannon entropy (NSE) and the normalized logarithmic energy entropy (NLEE). Subsequently, the yield feature vectors are fed to the PNN classifier to classify the disturbances. The PNN is trained with different spread factors to obtain better classification accuracy. For the best performance of the proposed method, the precise analysis is done for the selection of the type of input data for the PNN, the type of mother wavelet, and the required transform level which is based on the accuracy, simplicity, specificity, speed, and cost parameters. The results show that, by using normalized Shannon entropy and the normalized logarithmic energy entropy, not only it offers simplicity, specificity and reduced costs, it also has better accuracy compared to other smart and passive methods. Based on the results, the proposed islanding detection technique is highly accurate and does not mal-operate during islanding and non-islanding events.

This paper presents the design, fabrication and experimental power analysis of a novel double-stator magnetic geared permanent magnet (DSMGPM) machine which comprises of a double-stator permanent-magnet (PM) machine integrated a with triple rotor magnetic gear. The proposed machine can upscale the low-speed rotating magnetic field of the prime PMs on the prime rotor by using the modulation effect produced from the pole-pieces to high-speed rotating magnetic field from the field PMs. The low-speed prime rotor can also increase the speed of the field PM rotor and excite the coil windings to induce an electromotive force (EMF) resulting in electrical power. Thus, the machine is proposed for power generation in low-speed renewable energy applications such as wind turbines and tidal power generators. The proposed machine topology is presented and discussed while the performance power characteristics are evaluated experimentally. A prototype is fabricated and the measured results are in good agreement with the calculated results, therefore validating the proposed magnetic geared machine design.

This paper presents a novel double-stator permanent-magnet machine integrated with a triple rotor magnetic gear structure, which is proposed to address problems of mechanical geared generators for low-speed applications. Torque transmission is based on three rotors consisting of prime permanent-magnet (PM) poles in the middle rotor and field PM poles in the inner and outer rotors. The proposed machine combines the functions of magnetic gearing and electrical power generation. The operating principles of the magnetic gear and generator are discussed and the torque distribution characteristics of the integrated machine are analysed using the 2D finite-element method (2D FEM). Also the power, torque, and speed characteristics are reported. A prototype is fabricated and tested experimentally. The predicted and measured results validate the proposed machine design.