Search

Different optimization strategies to reduce the earth resistance in a high resistivity soil are discussed in this work and illustrated with a practical example. Finite Element simulations reproducing real-world conditions in terms of structure design and soil profiles have been made to evaluate the improvements that should be adopted to minimize earth resistance. We analyze an example of an earthing system of an array of four identical telescopes installed on high resistivity (kΩ· m order) soils with two different behaviors. In the first one, current dissipation occurs in an uniform soil. In the second one, a terrain with four layers of different resistivities is considered. This situation corresponds to a real world case of an observatory constructed in a volcanic terrain. It was found that the best strategy in each case differs: extend horizontal electrodes as far as possible from the foundation in the first case and combine these electrodes with buried vertical electrodes that connect with deep high conductive layers in the second. The results are discussed in terms of the achieved improvements depending on the modifications introduced in the main structure. [ABSTRACT FROM AUTHOR]

Solid-phase extraction in combination with large-volume sample stacking-capillary electrophoresis (SPE-LVSS-CE) was applied to measure chlortetracycline, doxycycline, oxytetracycline, and tetracycline in milk samples. Under optimal conditions, the proposed method had a linear range of 29 to 200 µg·L−1, with limits of detection ranging from 18.6 to 23.8 µg·L−1 with inter- and intraday repeatabilities < 10% (as a relative standard deviation) in all cases. The enrichment factors obtained were from 50.33 to 70.85 for all the TCs compared with a conventional capillary zone electrophoresis (CZE). This method is adequate to analyze tetracyclines below the most restrictive established maximum residue limits. The proposed method was employed in the analysis of 15 milk samples from different brands. Two of the tested samples were positive for the presence of oxytetracycline with concentrations of 95 and 126 µg·L−1. SPE-LVSS-CE is a robust, easy, and efficient strategy for online preconcentration of tetracycline residues in complex matrices. [ABSTRACT FROM AUTHOR]

To achieve analytical success, it is necessary to develop thorough clean-up procedures to extract analytes from the matrix. Dispersive solid phase extraction (DSPE) has been used as a pretreatment technique for the analysis of several compounds. This technique is based on the dispersion of a solid sorbent in liquid samples in the extraction isolation and clean-up of different analytes from complex matrices. DSPE has found a wide range of applications in several fields, and it is considered to be a selective, robust, and versatile technique. The applications of dispersive techniques in the analysis of veterinary drugs in different matrices involve magnetic sorbents, molecularly imprinted polymers, carbon-based nanomaterials, and the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method. Techniques based on DSPE permit minimization of additional steps such as precipitation, centrifugation, and filtration, which decreases the manipulation of the sample. In this review, we describe the main procedures used for synthesis, characterization, and application of this pretreatment technique and how it has been applied to food analysis. [ABSTRACT FROM AUTHOR]

Magnetic solid phase extraction has been used as pretreatment technique for the analysis of several compounds because of its advantages when it is compared with classic methods. This methodology is based on the use of magnetic solids as adsorbents for preconcentration of different analytes from complex matrices. Magnetic solid phase extraction minimizes the use of additional steps such as precipitation, centrifugation, and filtration which decreases the manipulation of the sample. In this review, we describe the main procedures used for synthesis, characterization, and application of this pretreatment technique which were applied in food analysis. [ABSTRACT FROM AUTHOR]

A method is presented for magnetic solid phase extraction of tartrazine from nonalcoholic beverages. The method involves the extraction and clean-up by activated carbon covered with magnetite dispersed in the sample, followed by the magnetic isolation and desorption of the analyte by basified methanol. The tartrazine eluted from the magnetic support was determined by spectrophotometry. Under optimal conditions, the linear range of the calibration curve ranges from 3 to 30 mg L−1, with a limit of detection of 1 mg L−1. The method was validated by comparing the results with those obtained by HPLC. A precision of <5.0% was obtained in all cases and no significant differences were observed (P<0.05). [ABSTRACT FROM AUTHOR]

The evolution of antimicrobial-resistant bacteria has become a threat to food safety and methods to control them are necessary. Counts of tetracycline-resistant (TR) bacteria by microbiological methods were compared with those obtained by quantitative PCR (qPCR) in 80 meat samples. TR Enterobacteriaceae counts were similar between the count plate method and qPCR ( P= 0.24), whereas TR aerobic mesophilic bacteria counts were significantly higher by the microbiological method ( P < 0.001). The distribution of tetA and tetB genes was investigated in different types of meat. tetA was detected in chicken meat (40%), turkey meat (100%), pork (20%), and beef (40%) samples, whereas tetB was detected in chicken meat (45%), turkey meat (70%), pork (30%), and beef (35%) samples. The presence of tetracycline residues was also investigated by a receptor assay. This study offers an alternative and rapid method for monitoring the presence of TR bacteria in meat and furthers the understanding of the distribution of tetA and tetB genes. [ABSTRACT FROM AUTHOR]

Describes methods for embedded boundary scanning. Board-level boundary scan testing; Test generation tools; System test architectures; Embedded-test software; Applications of boundary scan methods.

Ternary quantum dots (QDs) are novel nanomaterials that can be used in chemical analysis due their unique physicochemical and spectroscopic properties. These properties are size-dependent and can be adjusted in the synthetic protocol modifying the reaction medium, time, source of heat, and the ligand used for stabilization. In the last decade, several spectroscopic methods have been developed for the analysis of organic and inorganic analytes in biological, drug, environmental, and food samples, in which different sensing schemes have been applied using ternary quantum dots. This review addresses the different synthetic approaches of ternary quantum dots, the sensing mechanisms involved in the analyte detection, and the predominant areas in which these nanomaterials are used. [ABSTRACT FROM AUTHOR]

Hypnea musciformis (HM) and Acanthophora muscoides (AM) red seaweeds were evaluated for their antioxidant properties and efficacy to extend the chemical shelf life of black tiger shrimp (Penaeus monodon) during 14-daystorage. Treated shrimp were soaked in five percent ethanolic solution with 500 µg/mL of AM or HM powder for 30 min. HM had more phenols and flavonoids, increased radical scavenging activity, and greater H2O2 reducing power than AM in vitro. Biochemical quality indicators were significantly higher in the control group, followed by HM- and AM-treated samples during storage. On day 14 of storage, controls contained significantly higher amounts of biogenic amines than HM- or AM-treated samples. The shelf life of chilled stored shrimp increased due to the presence of compounds of butylated hydroxytoluene, sulfurous acid, heptadecane, mono (2-ethylhexyl), and 1,2-propanediol found in AM extract and sulfurous acid and 1,2-propanediol found in HM extract. A control group was soaked in the same ethanolic solution as treated samples without algae powder for 30 min. Each group was kept ice-cold during the soaking period. The results obtained demonstrate the usefulness of two seaweed extracts, Hypnea musciformis and Acanthophora muscoides, combined with ice by decreasing the formation of toxic biogenic amines in shrimp, enhancing its shelf life during ice storage. [ABSTRACT FROM AUTHOR]

Scorpion has long been used in traditional Chinese medicine, because whole scorpion body extract has anti-cancer, analgesic, anti-thrombotic blood anti-coagulation, immune modulating, anti-epileptic, and other functions. The purpose of this study was to find an efficient extraction method and investigate some of physical and chemical parameters, like water solubility, emulsification, foaming properties, and oil-holding capacity of obtained scorpion proteins. Response surface methodology (RSM) was used for the determination of optimal parameters of ultrasonic extraction (UE). Based on single factor experiments, three factors (ultrasonic power (w), liquid/solid (mL/g) ratio, and extraction time (min)) were used for the determination of scorpion proteins (SPs). The order of the effects of the three factors on the protein content and yield were ultrasonic power > extraction time > liquid/solid ratio, and the optimum conditions of extraction proteins were as follows: extraction time = 50.00 min, ultrasonic power = 400.00 w, and liquid/solid ratio = 18.00 mL/g. For the optimal conditions, the protein content of the ultrasonic extraction and yield were 78.94% and 24.80%, respectively. The solubility, emulsification and foaming properties, and water and oil holding capacity of scorpion proteins were investigated. The results of this study suggest that scorpion proteins can be considered as an important ingredient and raw material for the creation of water-soluble supramolecular complexes for drugs. [ABSTRACT FROM AUTHOR]

A fractional factorial design was used to evaluate the effects of temperature, frying time, blanching treatment and the thickness of potato slices on acrylamide content in crisps. The design was used on freshly harvested and four-month stored potatoes. The critical factors found were temperature and frying time, and the interaction between blanching treatment and slice thickness. Once frying conditions were selected, an acrylamide content of 725 and 1030 mg kg−1 was found for non-stored and 4-month stored tubers, with adequate textural parameters in both cases. The difference in concentration is related to storage conditions, which must be controlled in order to control acrylamide levels. Bioaccesibility studies demonstrated that acrylamide concentration remained at 70%, and reductions took place mainly at the intestinal phase, as a result of reaction with nucleophilic compounds. [ABSTRACT FROM AUTHOR]

N-carbamylglutamate (NCG), a synthetic analogue of N-acetylglutamate, is an activator of blood ammonia conversion and endogenous arginine synthesis. Here, we established an accurate quantitative determination of NCG in feeds, animal tissues, and body fluids using the high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS). The sample pretreatment procedures included extraction with 0.5% of formic acid in water/methanol (80/20, v/v), and purification using an anionic solid phase extraction cartridge. Satisfactory separation of NCG was achieved in 20 min with the application of an Atlantis T3 column, and a confirmative detection of NCG was ensured by multiple reaction monitoring of positive ions. NCG spiked in feeds, tissues, and body fluids were evaluated in regard to linearity, sensitivity, recovery, and repeatability. Recoveries for different sample matrices were in the range of 88.12% to 110.21% with relative standard deviations (RSDs) less than 8.8%. Limits of quantification were within the range of 0.012 to 0.073 mg kg−1 and 0.047 to 0.077 μg mL−1 for solid and liquid samples, respectively. This study will provide a solid foundation for the evaluation of availability and metabolic mechanism of NCG in animals. [ABSTRACT FROM AUTHOR]

The Artemisia argyi leaf (AL) has been used as a traditional medicine and food supplement in China and other Asian countries for hundreds of years. Phytochemical studies disclosed that AL contains various bioactive constituents. Among bioactive constituents, phenolic acids have been recognized as the main active compounds in AL. To the best of our knowledge, no research has been focused on extraction method for the bioactive phenolic acids from AL. Nowadays, deep eutectic solvents (DESs) are emerging as a new type of green and sustainable solvent for efficient extraction of bioactive compounds from natural products. In the present study, an environmentally friendly extraction method based on DESs was established to extract bioactive phenolic acids from ALs. Diverse tailor-made solvents, including binary and ternary DESs, were explored for simultaneous extraction of four phenolic acids (3-caffeoylquinic acid, 3,4-di-O-caffeoylquinic acid, 3,5-di-O-caffeoylquinic acid, and 4,5-di-O-caffeoylquinic acid) from AL. The results indicated that the ternary DES composed of a 2:1:2 molar ratio of choline chloride, malic acid, and urea showed enhanced extraction yields for phenolic acids compared with conventional organic solvents and other DESs. Subsequently, the extraction parameters for the four phenolic acids by selected tailor-made DESs, including liquid–solid ratios, water content (%) in the DESs, and extraction time, were optimized using response surface methodology and the optimal extraction conditions were: extraction time, 23.5 min; liquid–solid ratio, 57.5 mL/g (mL of DES/g dry weight of plant material); water content, 54%. The research indicated that DESs were efficient and sustainable green extraction solvents for extraction of bioactive phenolic acids from natural products. Compared to the conventional organic solvents, the DESs have a great potential as possible alternatives to those organic solvents in health-related areas such as food and pharmaceuticals. [ABSTRACT FROM AUTHOR]

Avocado oil has generated growing interest among consumers due to its nutritional and technological characteristics, which is evidenced by an increase in the number of scientific articles that have been published on it. The purpose of the present research was to discuss the extraction methods, chemical composition, and various applications of avocado oil in the food and medicine industries. Our research was carried out through a systematic search in scientific databases. Even though there are no international regulations concerning the quality of avocado oil, some authors refer to the parameters used for olive oil, as stated by the Codex Alimentarius or the International Olive Oil Council. They indicate that the quality of avocado oil will depend on the quality and maturity of the fruit and the extraction technique in relation to temperature, solvents, and conservation. While the avocado fruit has been widely studied, there is a lack of knowledge about avocado oil and the potential health effects of consuming it. On the basis of the available data, avocado oil has established itself as an oil that has a very good nutritional value at low and high temperatures, with multiple technological applications that can be exploited for the benefit of its producers. [ABSTRACT FROM AUTHOR]

This research focused on obtaining eicosapentaenoic acid (EPA, 20:5 n-3) and docosahexaenoic acid (DHA, 22:6 n-3) (EPA+DHA) concentrates from refined commercial salmon oil (RCSO). Independent variables of the complexation process were optimized by means of the application of response surface methodology (RSM) in order to obtain the maximum content of such fatty acids (FAs). As a result of employing the optimized conditions for all the variables (6.0, urea:FA content ratio; −18.0 °C, crystallization temperature; 14.80 h, crystallization time; 500 rpm, stirring speed), high contents of EPA and DHA could be obtained from RCSO, achieving increases of 4.1 and 7.9 times in the concentrate, with values of 31.20 and 49.31 g/100 g total FA, respectively. Furthermore, a 5.8-time increase was observed for the EPA + DHA content, which increased from 13.78 to 80.51 g/100 g total FA. It is concluded that RCSO can be transformed into a profitable source of EPA and DHA (EPA+DHA), thus leading to a product with higher commercial value. [ABSTRACT FROM AUTHOR]

Tetracyclin is a group of antimicrobial permitted in animal food production, but their concentrations in food of animal origin should not exceed 100 μg kg−1 (in meat and milk). Although the detection of these substances above these limits involves fines and jail for the producer, residues of tetracyclines are still being detected in food a potential risk to consumer health, especially babies. In the past, baby foods were carefully prepared at homes. However, modern lifestyles have led to the commercialization of ready-made baby food. Generally, these products are made with vegetable and meat from different animals, such as pork, chicken or beef. The presence of tetracyclines in meat at concentrations above 100 μg kg−1 is forbidden in Europe by the Regulation 37/2010. Consequently this concentration is also applicable to the portion of meat present in baby food. Even if the presence of tetracyclines is controlled regularly in meat, they should also be monitored in baby food as babies are vulnerable to such as drugs. A rapid analytical method based on high-performance liquid chromatography coupled to a tandem mass spectrometer (HPLC-MS/MS) for quantification of four tetracyclines (tetracycline, chlortetracycline, doxycycline and oxytetracycline) in baby food is presented. The tetracyclines are extracted with EDTA-McIlvaine buffer, acidified at pH 4.0, followed by liquid-liquid extraction with ethyl acetate. The final extract is analysed within 19 min on a Sunfire HPLC column from Waters. Validation was performed according to the Commission Decision 2002/657/EC. The mean accuracy was 103 μg kg−1, and the mean precision, was less than 23% for all the tetracyclines. The method was tested on 31 prepared baby food samples containing vegetable and beef. The presence of oxytetracycline was detected in one of the samples at a concentration of 5 μg kg−1. [ABSTRACT FROM AUTHOR]