Search

Abstract Background Effective antimicrobial therapy is an essential part of intensive care medicine and renal replacement therapy is an important and common intervention which significantly affects the pharmacokinetics of many antimicrobials. This is especially critical for substances with a narrow therapeutic range, creating a dilemma of weighing the risk of toxicity from increased drug exposure against risk of ineffective treatment and promotion of antimicrobial resistance. To address this problem, we investigate a target-controlled dialysis by in vitro experiments — a novel technique in which drug is spiked into the dialysis solution to make use of the physicochemical properties of renal replacement therapy for solute transport, with the goal to reduce the risk of inadequate drug exposure. Methods Five antibiotics (ceftazidime, meropenem, piperacillin/tazobactam, vancomycin, flucloxacillin) were dialyzed in an in vitro model of continuous veno-venous hemodialysis using 1 L of bovine serum albumin solution as simulated patient plasma compartment. This was done with and without antibiotics in target concentrations added to the dialysis solution, mimicking three clinically relevant scenarios: (i) target-controlled dialysis in a subject with sub-therapeutic drug levels, (ii) target-controlled dialysis in a subject with supra-therapeutic drug levels, and (iii) traditional dialysis of drugs starting at the target concentration. Drug levels were quantified by high-performance liquid chromatography. Additionally, the stability over 24 h of all antibiotics in two typical dialysis solutions was assessed. Results Our data shows that with target-controlled dialysis, antibiotic concentrations will change in the desired direction towards the target concentration, depending on the patients’ unbound drug levels in relation to the concentration in the dialysis solution. The desired target concentrations can be induced and maintained, regardless of the initial concentration. Furthermore, the stability tests revealed only a minor and clinically irrelevant loss in drug concentration (all < 10.2%) after 12 h. Conclusions We outlined the mechanistic plausibility and provided experimental evidence of the feasibility of the target-controlled dialysis concept, which could help to maintain therapeutic concentrations of many time-dependent antibiotics in critically ill patients under renal replacement therapy. The required stability in dialysis solutions was shown for a set of important antibiotics. The next step will be the prudent application of this concept to patients in clinical trials.

Abstract Bilirubin is one of the most frequently used laboratory values to monitor critically ill patients with cholestatic liver dysfunction. Besides bilirubin, toxic bile acids (TBAs), which may cause severe organ damage, are typically elevated. A correlation between both parameters seems plausible, but data are lacking. The aim was to investigate whether there is a correlation between bilirubin and TBAs in patients’ blood and whether a compareable reduction can be observed during the use of the adsorber CytoSorb (CS). As part of the Cyto-SOLVE study (NCT04913298), 16 critically ill patients with cholestatic liver dysfunction, bilirubin concentration > 10 mg/dl, continuous kidney replacement therapy and CS-application were investigated. Bilirubin and TBA concentrations were measured from arterial blood at defined time points (before start, after 6 and 12 h). Relative reduction (RR) was calculated using the formula $$\:\:{\boldsymbol{RR}}\:{\boldsymbol{\left(\%\right)}}=\frac{{\boldsymbol{concentration\left(pre-post\right)}}}{{\boldsymbol{concentration\left(pre\right)}}}*{\boldsymbol{100}}$$ . A moderate to high correlation between bilirubin and TBA concentration at all defined timepoints (rstart=0.64, p = 0.008; r6h = 0.85, p

Abstract Introduction The release of pro-inflammatory cytokines in critically ill patients with sepsis leads to endothelial dysfunction resulting in cardiocirculatory insufficiency. Their extracorporeal elimination using the cytokine adsorber CytoSorb® (CS) (adsorption of especially hydrophobic molecules 500 pg/ml), continuous kidney replacement therapy, and the application of CS. Various cytokines and chemokines were measured pre- and post-CS as well as in patients’ blood at predefined timepoints. Significant changes in the concentrations were detected with the Wilcoxon test with associated samples. Clearance of the adsorber (ml/min) was calculated with: $$blood\,flow*\frac{{concentration\, \left( {pre - post} \right)}}{{concentration\, \left( {pre} \right)}}.$$ b l o o d f l o w ∗ c o n c e n t r a t i o n p r e - p o s t c o n c e n t r a t i o n pre . Results Most of the inflammatory mediators showed a high initial extracorporeal clearance of 70–100 ml/min after CS installation, which dropped quickly to 10-30 ml/min after 6 h of treatment. No difference in clearance was observed between pro- and anti-inflammatory cytokines. Despite extracorporeal adsorption, a significant (p

Abstract Background Rhabdomyolysis is a serious condition that can lead to acute kidney injury with the need of renal replacement therapy (RRT). The cytokine adsorber Cytosorb® (CS) can be used for extracorporeal myoglobin elimination in patients with rhabdomyolysis. However, data on adsorption capacity and saturation kinetics are still missing. Methods The prospective Cyto-SOLVE study (NCT04913298) included 20 intensive care unit patients with severe rhabdomyolysis (plasma myoglobin > 5000 ng/ml), RRT due to acute kidney injury and the use of CS for myoglobin elimination. Myoglobin and creatine kinase (CK) were measured in the patient´s blood and pre- and post-CS at defined time points (ten minutes, one, three, six, and twelve hours after initiation). We calculated Relative Change (RC, %) with: $$1 - \left( {concentration(pre - post)\,/\,concentration\left( {pre} \right)} \right)*100$$ . Myoglobin plasma clearances (ml/min) were calculated with: $$\left( {bloodflow*\left( {1 - hematocrit} \right)} \right)*\left( {concentration\left( {pre - post} \right)\,/\,concentration\left( {pre} \right)} \right)$$ Results There was a significant decrease of the myoglobin plasma concentration six hours after installation of CS (median (IQR) 56,894 ng/ml (11,544; 102,737 ng/ml) vs. 40,125 ng/ml (7879; 75,638 ng/ml) (p

Abstract Background Therapeutic drug monitoring (TDM) of anti-infectives such as linezolid is routinely performed in blood of intensive care unit (ICU) patients to optimize target attainment. However, the concentration at the site of infection is considered more important for a successful therapy. Until now, bronchoalveolar lavage (BAL) is the gold standard to measure intrapulmonary concentrations of anti-infective agents. However, it is an invasive method and unsuitable for regular TDM. The aim of this proof-of-concept study was to investigate whether it is possible to reliably determine the intrapulmonary concentration of linezolid from endotracheal aspiration (ENTA). Methods Intubated ICU patients receiving 600 mg intravenous linezolid twice daily were examined in steady state. First, preliminary experiments were performed in six patients to investigate which patients are suitable for linezolid measurement in ENTA. In a second step, trough and peak linezolid concentrations of plasma and ENTA were determined in nine suitable patients. Results Linezolid can validly be detected in ENTA with viscous texture and > 0.5 mL volume. The mean (SD) linezolid trough concentration was 2.02 (1.27) mg/L in plasma and 1.60 (1.36) mg/L in ENTA, resulting in a median lung penetration rate of 104%. The mean (SD) peak concentration in plasma and ENTA was 10.77 (5.93) and 4.74 (2.66) mg/L. Conclusions Linezolid can validly be determined in ENTA with an adequate texture and volume. The penetration rate is comparable to already published BAL concentrations. This method might offer a simple and non-invasive method for TDM at the site of infection “lung”. Due to promising results of the feasibility study, comparison of ENTA and BAL in the same patient should be investigated in a further trial.

Abstract Background The release of toxic bile acids (BAs) in the blood of critically ill patients with cholestatic liver dysfunction might lead to the damage of various organs. Their extracorporeal elimination using the cytokine adsorber Cytosorb® (CS) (adsorption of especially hydrophobic molecules 10 mg/dl and the application of CS into the dialysis circuit. Bilirubin and different BAs were measured pre- and post-CS at defined timepoints (10 min, 1, 3, 6, and 12 h after initiation). Relative reduction (RR, %) was calculated with: $$1-\left(\frac{\mathrm{concentration} (\mathrm{pre}-\mathrm{post})}{\mathrm{concentration} (\mathrm{pre})}\right)*100$$ 1 - concentration ( pre - post ) concentration ( pre ) ∗ 100 . Results The median RR for total and conjugated bilirubin after initiation was − 31.8% and − 30.3%, respectively, and decreased to − 4.5% and − 4.8% after 6 h. A high initial RR was observed for the toxic BAs GCA (− 97.4%), TCA (− 94.9%), GCDCA (− 82.5%), and TCDCA (− 86.0%), decreasing after 6 h to − 32.9%, − 32.7%, − 12.8%, and − 14.3%, respectively. The protective hydrophilic BAs showed a comparable RR after initiation (UDCA: − 77.7%, GUDCA: − 83.0%, TUDCA: − 91.3%) dropping after 6 h to − 7.4%, − 8.5%, and − 12.5%, respectively. Conclusions Cytosorb® can adsorb bilirubin and toxic as well as protective BAs. However, a fast saturation of the adsorber resulting in a rapid decrease of the RR was observed. Furthermore, no relevant difference between hydrophobic toxic and hydrophilic protective BAs was detected regarding the adsorption amount. The clinical benefit or harm of the BA adsorption needs to be evaluated in the future.

Accurate assessment of renal function is of great clinical and scientific importance, as it is an important pharmacokinetic covariate of pivotal drugs. The iohexol clearance is nearly identical to the glomerular filtration rate, but its determination usually requires an intravenous injection and therefore bears intrinsic risks. This motivates to showcase an “en passant” approach to quantification of renal function without additional risk or blood sampling beyond routine care using real-world data. We enrolled 37 intensive care patients who received high doses of iohexol for computed tomography imaging, and quantified series of iohexol plasma concentrations by high-performance liquid chromatography (HPLC-UV). Iohexol clearance was derived by both log-linear regression and nonlinear least squares fitting and compared to glomerular filtration rate estimated by the CKD-EPI-2021 formulas. Nonlinear fitting not only turned out to be more accurate but also more robust in handling the irregularly timed data points. Concordance of iohexol clearance against estimations based on both creatinine and cystatin C showed a slightly higher bias (−3.44 mL/min/1.73 m2) compared to estimations based on creatinine alone (−0.76 mL/min/1.73 m2), but considerably narrower limits of agreement (±42.8 vs. 56 mL/min/1.73 m2) and higher Lin’s correlation (0.84 vs. 0.72). In summary, we have demonstrated the feasibility and performance of the “en passant” variant of the iohexol method in intensive care medicine and described a working protocol for its application in clinical practice and pharmacologic studies.

Severe rhabdomyolysis frequently results in acute kidney injury (AKI) due to myoglobin accumulation with the need of kidney replacement therapy (KRT). The present study investigated whether the application of Cytosorb® (CS) led to an increased rate of kidney recovery in patients with KRT due to severe rhabdomyolysis. Adult patients with a myoglobin-concentration >10,000 ng/ml and KRT were included from 2014 to 2021. Exclusion criteria were chronic kidney disease and CS-treatment before study inclusion. Groups 1 and 2 were defined as KRT with and without CS, respectively. The primary outcome parameter was independence from KRT after 30 days. Propensity score (PS) matching was performed (predictors: myoglobin, SAPS-II, and age), and the chi2-test was used. 35 pairings could be matched (mean age: 57 vs. 56 years; mean myoglobin: 27,218 vs. 26,872 ng/ml; mean SAPS-II: 77 vs. 76). The probability of kidney recovery was significantly (p = .04) higher in group 1 (31.4 vs. 11.4%, mean difference: 20.0%, odds ratio (OR): 3.6). Considering patients who survived 30 days, kidney recovery was also significantly (p = .03) higher in patients treated with CS (61.1 vs. 23.5%, mean difference: 37.6%, OR: 5.1). In conclusion, the use of CS might positively affect renal recovery in patients with severe rhabdomyolysis. A prospective randomized controlled trial is needed to confirm this hypothesis.

Abstract Background Hemadsorption of cytokines is used in critically ill patients with sepsis or septic shock. Concerns have been raised that the cytokine adsorber CytoSorb® unintentionally adsorbs vancomycin. This study aimed to quantify vancomycin elimination by CytoSorb®. Methods Critically ill patients with sepsis or septic shock receiving continuous renal replacement therapy and CytoSorb® treatment during a prospective observational study were included in the analysis. Vancomycin pharmacokinetics was characterized using population pharmacokinetic modeling. Adsorption of vancomycin by the CytoSorb® was investigated as linear or saturable process. The final model was used to derive dosing recommendations based on stochastic simulations. Results 20 CytoSorb® treatments in 7 patients (160 serum samples/24 during CytoSorb®-treatment, all continuous infusion) were included in the study. A classical one-compartment model, including effluent flow rate of the continuous hemodialysis as linear covariate on clearance, best described the measured concentrations (without CytoSorb®). Significant adsorption with a linear decrease during CytoSorb® treatment was identified (p

Abstract Background A cytokine storm is life threatening for critically ill patients and is mainly caused by sepsis or severe trauma. In combination with supportive therapy, the cytokine adsorber Cytosorb® (CS) is increasingly used for the treatment of cytokine storm. However, it is questionable whether its use is actually beneficial in these patients. Methods Patients with an interleukin-6 (IL-6) > 10,000 pg/ml were retrospectively included between October 2014 and May 2020 and were divided into two groups (group 1: CS therapy; group 2: no CS therapy). Inclusion criteria were a regularly measured IL-6 and, for patients allocated to group 1, CS therapy for at least 90 min. A propensity score (PS) matching analysis with significant baseline differences as predictors (Simplified Acute Physiology Score (SAPS) II, extracorporeal membrane oxygenation, renal replacement therapy, IL-6, lactate and norepinephrine demand) was performed to compare both groups (adjustment tolerance:

Abstract There are different methods of artificial liver support for patients with acute liver dysfunction (ALD). However, CytoSorb (CS) might be a new approved option for those patients. Question of interest is whether the elimination performance of CS was comparable to that of advanced organ support (ADVOS). Patients, treated with CS (integrated into high-flux dialysis) or ADVOS and a total bilirubin > 10 mg/dl were included. Laboratory parameters were evaluated before starting therapy (d0) and 12–24 h thereafter (d1). The Wilcoxon-test with associated samples was used for statistical analysis. Thirty-nine patients (33 CS, 6 ADVOS) were included. The median bilirubin at d0 was 16.9 and 17.7 mg/dl and at d1 was 13.2 and 15.9 mg/dl, in the CS and ADVOS group, respectively. There was a significant bilirubin reduction as well in the CS group (p

Abstract Background Rhabdomyolysis is frequently occurring in critically ill patients, resulting in a high risk of acute kidney injury (AKI) and potentially permanent kidney damage due to increased myoglobin levels. The extracorporeal elimination of myoglobin might be an approach to prevent AKI, but its molecular weight of 17 kDa complicates an elimination with conventional dialysis membranes. Question of interest is, if myoglobin can be successfully eliminated with the cytokine adsorber Cytosorb® (CS) integrated in a high-flux dialysis system. Methods Patients were included between 10/2014 and 05/2020 in the study population if they had an anuric renal failure with the need of renal replacement therapy, if CS therapy was longer than 90 min and if myoglobin level was > 5.000 ng/ml before treatment. The measurement times of the laboratory values were: d-1 = 24–36 h before CS, d0 = shortly before starting CS and d1 = 12–24 h after starting CS treatment. Statistical analysis were performed with Spearman’s correlation coefficient, Wilcoxon test with associated samples and linear regression analysis. Results Forty-three patients were included in the evaluation (median age: 56 years, 77% male patients, 32.6% ECMO therapy, median SAPS II: 80 points and in-hospital mortality: 67%). There was a significant equilateral correlation between creatine kinase (CK) and myoglobin at all measurement points. Furthermore, there was a significant reduction of myoglobin (p = 0.03, 95% confidence interval (CI): − 9030, − 908 ng/ml) during CS treatment, with a median relative reduction of 29%. A higher median reduction of 38% was seen in patients without ongoing rhabdomyolysis (CK decreased during CS treatment, n = 21). In contrast, myoglobin levels did not relevantly change in patients with increasing CK and therefore ongoing rhabdomyolysis (n = 22, median relative reduction 4%). Moreover, there was no significant difference in myoglobin elimination in patients with and without ECMO therapy. Conclusion Blood purification with Cytosorb® during high-flux dialysis led to a significant reduction of myoglobin in patients with severe rhabdomyolysis. The effect might be obscured by sustained rhabdomyolysis, which was seen in patients with rising CK during treatment. Prospective clinical trials would be useful in investigating its benefits in avoiding permanent kidney damage.

Voriconazole (VRC) is used as first line antifungal agent against invasive aspergillosis. Model-based approaches might optimize VRC therapy. This study aimed to investigate the predictive performance of pharmacokinetic models of VRC without pharmacogenetic information for their suitability for model-informed precision dosing. Seven PopPK models were selected from a systematic literature review. A total of 66 measured VRC plasma concentrations from 33 critically ill patients was employed for analysis. The second measurement per patient was used to calculate relative Bias (rBias), mean error (ME), relative root mean squared error (rRMSE) and mean absolute error (MAE) (i) only based on patient characteristics and dosing history (a priori) and (ii) integrating the first measured concentration to predict the second concentration (Bayesian forecasting). The a priori rBias/ME and rRMSE/MAE varied substantially between the models, ranging from −15.4 to 124.6%/−0.70 to 8.01 mg/L and from 89.3 to 139.1%/1.45 to 8.11 mg/L, respectively. The integration of the first TDM sample improved the predictive performance of all models, with the model by Chen (85.0%) showing the best predictive performance (rRMSE: 85.0%; rBias: 4.0%). Our study revealed a certain degree of imprecision for all investigated models, so their sole use is not recommendable. Models with a higher performance would be necessary for clinical use.

Abstract Spectroscopic methods for quantitative detection of molecules of the heme synthesis and heme metabolism are presented. This can be used to diagnose disease patterns such as iron deficiency, porphyria or free hemoglobin. This article combines an overview of clinical conditions associated with disorders of heme biosynthesis and presents selected laboratory findings in the development of portable diagnostic devices. An iron deficiency measurement device has already been validated as a portable device in clinical trials, two other methods have been tested according to EMA guidelines and are available for use in clinical validation studies. The presented rapid, low‐cost and low‐effort methods can support diagnosis in everyday clinical practice and initiate more targeted therapies, even for rare disease conditions.

Short-term studies have shown an attenuated immune response in hemodialysis patients after COVID-19-vaccination. The present study examines how antibody response is maintained after vaccination against SARS-CoV-2 in a large population of hemodialysis patients from six outpatient dialysis centers. We retrospectively assessed serum antibody levels against SARS-CoV-2 spike protein and nucleocapsid protein (electrochemiluminescence immunoassays, Roche Diagnostics) after COVID-19-vaccination in 298 hemodialysis and 103 non-dialysis patients (controls), comparing early and late antibody response. Compared to a non-dialysis cohort hemodialysis patients showed a favorable but profoundly lower early antibody response, which decreased substantially during follow-up measurement (median 6 months after vaccination). Significantly more hemodialysis patients had anti-SARS-CoV-2-S antibody titers below 100 U/mL (p < 0.001), which increased during follow-up from 23% to 45% but remained low in the control group (3% vs. 7%). In multivariate analysis, previous COVID-19 infections (p < 0.001) and female gender (p < 0.05) were significantly associated with higher early as well as late antibody vaccine response in hemodialysis patients, while there was a significant inverse correlation between patient age and systemic immunosuppression (p < 0.001). The early and late antibody responses were significantly higher in patients receiving vaccination after a SARS-CoV-2 infection compared to uninfected patients in both groups (p < 0.05). We also note that a higher titer after complete immunization positively affected late antibody response. The observation, that hemodialysis patients showed a significantly stronger decline of SARS-CoV-2 vaccination antibody titers within 6 months, compared to controls, supports the need for booster vaccinations to foster a stronger and more persistent antibody response.

Several studies have addressed the poor stability of meropenem in aqueous solutions, though not considering the main degradation product, the open-ring metabolite (ORM) form. In the present work, we elucidate the metabolic fate of meropenem and ORM from continuous infusion to the human bloodstream. We performed in vitro infusate stability tests at ambient temperature with 2% meropenem reconstituted in 0.9% normal saline, and body temperature warmed buffered human serum with 2, 10, and 50 mg/L meropenem, covering the therapeutic range. We also examined meropenem and ORM levels over several days in six critically ill patients receiving continuous infusions. Meropenem exhibited a constant degradation rate of 0.006/h and 0.025/h in normal saline at 22 °C and serum at 37 °C, respectively. Given that 2% meropenem remains stable for 17.5 h in normal saline (≥90% of the initial concentration), we recommend replacement of the infusate every 12 h. Our patients showed inter-individually highly variable, but intra-individually constant molar ORM/(meropenem + ORM) ratios of 0.21–0.52. Applying a population pharmacokinetic approach using the degradation rate in serum, spontaneous degradation accounted for only 6% of the total clearance.

Background: The MeroRisk-calculator, an easy-to-use tool to determine the risk of meropenem target non-attainment after standard dosing (1000 mg; q8h), uses a patient’s creatinine clearance and the minimum inhibitory concentration (MIC) of the pathogen. In clinical practice, however, the MIC is rarely available. The objectives were to evaluate the MeroRisk-calculator and to extend risk assessment by including general pathogen sensitivity data. Methods: Using a clinical routine dataset (155 patients, 891 samples), a direct data-based evaluation was not feasible. Thus, in step 1, the performance of a pharmacokinetic model was determined for predicting the measured concentrations. In step 2, the PK model was used for a model-based evaluation of the MeroRisk-calculator: risk of target non-attainment was calculated using the PK model and agreement with the MeroRisk-calculator was determined by a visual and statistical (Lin’s concordance correlation coefficient (CCC)) analysis for MIC values 0.125–16 mg/L. The MeroRisk-calculator was extended to include risk assessment based on EUCAST-MIC distributions and cumulative-fraction-of-response analysis. Results: Step 1 showed a negligible bias of the PK model to underpredict concentrations (−0.84 mg/L). Step 2 revealed a high level of agreement between risk of target non-attainment predictions for creatinine clearances >50 mL/min (CCC = 0.990), but considerable deviations for patients

Various studies have reported insufficient beta-lactam concentrations in critically ill patients. The extent to which therapeutic drug monitoring (TDM) in clinical practice can reduce insufficient antibiotic concentrations is an ongoing matter of investigation. We retrospectively evaluated routine meropenem and piperacillin measurements in critically ill patients who received antibiotics as short infusions in the first year after initiating a beta-lactam TDM program. Total trough concentrations above 8.0 mg/L for meropenem and above 22.5 mg/L for piperacillin were defined as the breakpoints for target attainment. We included 1832 meropenem samples and 636 piperacillin samples. We found that 39.3% of meropenem and 33.6% of piperacillin samples did not reach the target concentrations. We observed a clear correlation between renal function and antibiotic concentration (meropenem, r = 0.53; piperacillin, r = 0.63). Patients with renal replacement therapy or creatinine clearance (CrCl) of 100 mL/min that achieved the target concentrations with the maximum recommended dosage. Patients with impaired renal function only required TDM if toxic side effects were noted. In contrast, patients with normal renal function required different dosage regimens and TDM-guided therapy to reach the breakpoints of target attainment.