Search

Background Substandard and falsified (SF) medicines are a serious threat to public health in low- and middle-income countries (LMICs). Visual inspection of medicines and screening analysis using the Global Pharma Health Fund (GPHF)-Minilab are important in medicine quality surveillance in low-resource settings.Methods Recently, 260 medicine samples from Nigeria had been investigated for assay and dissolution according to the United States Pharmacopeia (USP). In the present study, these results were compared to the results of the investigation of the same samples by visual inspection and by GPHF-Minilab analysis by local personnel in Nigeria.Results Visual inspection identified many deficiencies of dosage units and packaging information in SF medicines. All four falsified medicines were readily identifiable, primarily from serious spelling errors in the labelling, and from manufacturer names which could not be verified using internet resources. In GPHF-Minilab disintegration testing, two samples did not disintegrate even after 60 min; both were found to fail USP dissolution testing with extreme deviations. Of the 20 samples which deviated in USP assay analysis by more than 20% from the declared API amount, seven (35%) were detected as non-compliant in TLC analysis. Evaluation by TLC image analysis with a recently developed smartphone application (named TLCyzer) increased sensitivity to 62.5% but led to an unacceptably low specificity (75.2%). Additional training of the local personnel improved the results of both TLC analysis and TLCyzer evaluation. Photographs of the visual deficiencies and of the TLC analysis results of the SF medicines are provided as PowerPoint and PDF slides with this publication, for future training courses of pharmacy staff and health workers in LMICs.Conclusion Visual inspection, and screening analysis with simple, rapid and inexpensive methods, are important in the surveillance for SF medicines in LMICs. This study provides data on the potential and the limitations of such screenings.

The present study investigated the possibilities and limitations of using a low-cost NIR spectrometer for the verification of the presence of the declared active pharmaceutical ingredients (APIs) in tablet formulations, especially for medicine screening studies in low-resource settings. Spectra from 950 to 1650 nm were recorded for 170 pharmaceutical products representing 41 different APIs, API combinations or placebos. Most of the products, including 20 falsified medicines, had been collected in medicine quality studies in African countries. After exploratory principal component analysis, models were built using data-driven soft independent modelling of class analogy (DD-SIMCA), a one-class classifier algorithm, for tablet products of penicillin V, sulfamethoxazole/trimethoprim, ciprofloxacin, furosemide, metronidazole, metformin, hydrochlorothiazide, and doxycycline. Spectra of amoxicillin and amoxicillin/clavulanic acid tablets were combined into a single model. Models were tested using Procrustes cross-validation and by projection of spectra of tablets containing the same or different APIs. Tablets containing no or different APIs could be identified with 100 % specificity in all models. A separation of the spectra of amoxicillin and amoxicillin/clavulanic acid tablets was achieved by partial least squares discriminant analysis. 15 out of 19 external validation products (79 %) representing different brands of the same APIs were correctly identified as members of the target class; three of the four rejected samples showed an API mass percentage of the total tablet weight that was out of the range covered in the respective calibration set. Therefore, in future investigations larger and more representative spectral libraries are required for model building. Falsified medicines containing no API, incorrect APIs, or grossly incorrect amounts of the declared APIs could be readily identified.Variation between different NIR-S-G1 spectroscopic devices led to a loss of accuracy if spectra recorded with different devices were pooled. Therefore, piecewise direct standardization was applied for calibration transfer.The investigated method is a promising tool for medicine screening studies in low-resource settings.

Abstract Substandard and falsified medicines present a serious threat to public health. Simple, low-cost screening tools are important in the identification of such products in low- and middle-income countries. In the present study, a smartphone-based imaging software was developed for the quantification of thin-layer chromatographic (TLC) analyses. A performance evaluation of this tool in the TLC analysis of 14 active pharmaceutical ingredients according to the procedures of the Global Pharma Health Fund (GPHF) Minilab was carried out, following international guidelines and assessing accuracy, repeatability, intermediate precision, specificity, linearity, range and robustness of the method. Relative standard deviations of 2.79% and 4.46% between individual measurements were observed in the assessments of repeatability and intermediate precision, respectively. Small deliberate variations of the conditions hardly affected the results. A locally producible wooden box was designed which ensures TLC photography under standardized conditions and shielding from ambient light. Photography and image analysis were carried out with a low-cost Android-based smartphone. The app allows to share TLC photos and quantification results using messaging apps, e-mail, cable or Bluetooth connections, or to upload them to a cloud. The app is available free of charge as General Public License (GPL) open-source software, and interested individuals or organizations are welcome to use and/or to further improve this software.

Abstract This study evaluates the use of the Global Pharma Health Fund (GPHF) Minilab for medicine quality screening by 16 faith-based drug supply organizations located in 13 low- and middle-income countries. The study period included the year before the COVID-19 pandemic (2019) and the first year of the pandemic (2020). In total 1,919 medicine samples were screened using the GPHF Minilab, and samples showing serious quality deficiencies were subjected to compendial analysis in fully equipped laboratories. Thirty-four (1.8%) of the samples were found not to contain the declared active pharmaceutical ingredient (API), or less than 50% of the declared API, or undeclared APIs, and probably represented falsified products. Fifty-four (2.8%) of the samples were reported as substandard, although the true number of substandard medicines may have been higher due to the limited sensitivity of the GPHF Minilab. The number of probably falsified products increased during the COVID-19 pandemic, especially due to falsified preparations of chloroquine; chloroquine had been incorrectly advocated as treatment for COVID-19. The reports from this project resulted in four international WHO Medical Product Alerts and several national alerts. Within this project, the costs for GPHF Minilab analysis resulted as 25.85 € per sample. Medicine quality screening with the GPHF Minilab is a cost-effective way to contribute to the global surveillance for substandard and falsified medical products.

Abstract Background Postpartum haemorrhage (PPH) is the leading cause of maternal mortality in low- and middle-income countries (LMICs). Oxytocin and misoprostol are used for the prevention and treatment of PPH. However, both medicines are chemically unstable and sensitive to environmental conditions. Previous studies reported a high prevalence of substandard oxytocin and misoprostol preparations in LMICs. Methods In randomly selected health facilities of four districts of Malawi, the availability of oxytocin and misoprostol was determined, and the knowledge of health workers on storage requirements and use of oxytocics was assessed. Temperature loggers were used to record the storage temperature of oxytocics. Samples of oxytocin injections and misoprostol tablets were collected from the health facilities and from wholesalers. Oxytocin samples were analysed for identity, assay (= quantity of oxytocin) and for pH value according to United States Pharmacopeia 40. Misoprostol samples were analysed for identity, assay, dissolution and related substances according to the International Pharmacopeia 2017. Results All visited hospitals and health centers had oxytocin available. At non-refrigerated storage sites, the recorded mean kinetic temperature exceeded the oxytocic’s storage temperature stated on the labels in 42% of the sites. At refrigerated storage sites, the required temperature of 2–8 °C was exceeded in 33% of the sites. Out of 65 oxytocin samples, 7 (11%) showed moderate deviations from specification, containing 82.2–86.8% of the declared amount of oxytocin. Out of 30 misoprostol samples, 5 (17%) showed extreme deviations, containing only 12.7–30.2% of the declared amount. The extremely substandard misoprostol was reported to the national authorities and to WHO, leading to an immediate recall of the respective brand in Malawi. The UK-based distributor of this brand closed its business shortly thereafter. Conclusion Availability of oxytocin was excellent in Malawi, and its quality was better than reported in previous studies in other LMICs. However, storage conditions at the health facilities often did not meet the requirements. Extremely substandard misoprostol tablets were found, representing a serious risk to maternal health. This shows the need for continued efforts for quality assurance in medicine procurement and registration, as well as for post-marketing surveillance.

Sustainable Development Goal 3.1 calls for a reduction of the maternal mortality ratio to less than 70 per 100,000 live births by 2030. The most important cause of maternal mortality is post-partum haemorrhage (PPH). Oxytocin injections and misoprostol tablets are medicines of first choice for the management of PPH in low- and middle-income countries (LMICs). Unfortunately, both substances are chemically unstable, and previous studies have revealed serious quality problems of these medicines in LMICs. The present study is the first report on their quality in Rwanda. From 40 randomly selected health facilities (hospitals, health centers, retail pharmacies and private clinics) in different parts of Rwanda, as well as from six wholesalers and government stores, oxytocin injections and misoprostol tablets were collected. Oxytocin storage temperatures in the health facilities were monitored for six months using temperature data loggers, and found to correctly follow the storage requirements stated by the manufacturers (2-8°C, or room temperature) with few minor deviations. Oxytocin injections (57 samples, representing seven batches of four brands) were tested for their oxytocin content and pH value according to the United States Pharmacopeia. Twenty-four samples from three European manufacturers passed all tests. However, all nine samples of one batch of a Chinese manufacturer showed an excessive content of oxytocin (range 117.2-121.5% of the declared amount). Another batch of the same manufacturer showed extreme variations of the concentration of the preservative benzyl alcohol. Misoprostol tablets (25 samples, representing ten batches of six brands) were tested for content and dissolution according to the International Pharmacopoeia. Fifteen samples passed, but all 10 samples of two brands from India failed with extreme deviations, containing only 42.5-48.7% of the stated amount of misoprostol. In conclusion, oxytocin quality in Rwanda was better than reported from other African countries. However, two extremely substandard brands of misoprostol tablets were found. The Rwandan authorities reacted quickly and efficiently, and recalled these substandard medicines from the market. For oxytocin and misoprostol, with their well-known problems of quality and stability, procurement should possibly be restricted to medicines which are WHO-prequalified or which have been manufactured in countries with stringent regulatory authorities.

Access to safe, effective and affordable medicines of good quality is included into the Sustainable Development Goals of the United Nations. Furthermore, WHO has developed a Global Action Plan with the aim to raise access to essential medicines against non-communicable diseases (NCDs) to 80%, and to improve their affordability. In order to contribute to the monitoring of progress towards these goals, the present study investigated the availability and affordability of seven antibiotics and six medicines against non-communicable diseases in the northeast of the Democratic Republic of Congo and the west of the Republic of Cameroon. Data on availability and prices of these medicines were collected in 60 different sites (34 in the DR Congo, 26 in Cameroon), including government health facilities, church health facilities, private pharmacies and informal vendors, as part of a study on medicine quality. The data were analyzed using a standardized procedure developed by WHO and Health Action International (HAI). Average availability of the investigated antibiotics ranged from 62% to 98% in the different types of facilities in both countries, including the informal vendors. Average availability for medicines against NCDs in the different types of facilities showed a higher variation in both countries, ranging from 11% up to 87%. The average availability of medicines against NCDs in government health facilities was only 33% in Cameroon, and as low as 11% in the DR Congo. In contrast, availability of medicines against NCDs in church health facilities in Cameroon was 70%, not far from the 80% availability goal set by WHO. Medicine prices were clearly higher in Cameroon than in the DR Congo, with median price ratios to an international reference price of 5.69 and 2.17, respectively (p < 0.001). In relation to the daily minimum wages in both countries, treatment courses with five of the seven investigated antibiotics could be considered as affordable, while in each country only one out of the five investigated medicines against NCDs could be considered as affordable. Especially generic medicines provided by government and church health facilities showed reasonable affordability in most cases, while originator medicines offered by private pharmacies were clearly unaffordable to a major part of the population. Despite some encouraging findings on the availability of antibiotics in both countries, the availability and affordability of medicines against NCDs urgently requires further improvements.

Misoprostol is listed in the WHO essential medicines list and can be used for induction of labour, for prevention and treatment of post-partum haemorrhage, and for abortions. The compound is unstable, and substandard misoprostol preparations have been detected in low- and middle-income countries. We now investigated the stability of misoprostol tablets according to the international guidelines for stability testing of pharmaceutical products. Three brands (four batches) of misoprostol tablets were collected in Malawi and Rwanda: the originator product, a WHO-prequalified product, and a generic product without WHO prequalification. A further batch of the originator product was collected in Germany. To investigate the effect of damage to the primary packaging, additional blister strips of one sample were intentionally damaged with a needle and investigated in parallel. Samples were placed in stability chambers for six months at 40°C/75% relative humidity (RH) and at 25°C/60% RH. After 0, 1, 2, 3 and 6 months, misoprostol content was determined according to the International Pharmacopeia. At 40°C/75% RH, all samples showed a decline of misoprostol content, but four of the batches still remained within the pharmacopeial specifications, while one of the two batches of the generic product without WHO-prequalification showed a final content of 86.2% which is out of specifications. Damage to the primary packaging greatly decreased stability, resulting in a final content of only 48.2% of the declared misoprostol amount. At 25°C/60% RH all samples remained in specifications for six months, even the sample with the damaged blister. Dissolution of misoprostol remained in specifications of the pharmacopoeia for six months for all batches, except for the sample with damaged blisters stored at 40°C/75% RH. This study confirms that the stability of misoprostol tablets must be ensured by intact, good-quality primary packaging. Careful supplier qualification is required in the procurement process.

BackgroundAccess to affordable and good quality medicines is a key to meeting Sustainable Development Goal No. 3 by the year 2030. Prices, availability and affordability of essential medicines have been studied in many developing countries, but no such information has been published about Rwanda yet. This study aimed at providing data on prices, availability and affordability of medicines in different health facilities of Rwanda.MethodsA survey was carried out on availability, prices and affordability of 18 medicines in Kigali City and five districts of Rwanda. 44 health facilities were surveyed, including public and faith-based hospitals, public and faith-based health centers and private pharmacies. The standardized methodology developed by WHO and Health Action International (HAI) was used to collect and analyze the data.FindingsPrices for generic medicines in public and faith-based health facilities were remarkably low, with median price ratios (MPRs) of 1.0 in comparison to the international procurement prices published by Management Sciences for Health. In private pharmacies, prices were twice as high (MPR = 1.99 for generics). Availability of medicines fell short of the of 80% target set by WHO, but was better than reported from many other developing countries. Availability of medicines was highest in the private sector (71.3%) and slightly lower in the faith-based (62.8%) and public (59.6%) sectors. The government procurement agency was found to work efficiently, achieving prices 30% below the international procurement price given in the International Medical Product Price Guide. Affordability of medicines was better in the public and faith-based sectors than in the private sector.ConclusionIn Rwanda, medicines are affordable but poorly available in both the public and the faith-based sectors. Further improvements of the availability of medicines in the public and the faith-based health facilities represent the most important key to increase accessibility and affordability of medicines in Rwanda.

BackgroundQuality-assured medicines are a principal means of achieving health-related Sustainable Development Goals. An example of quality assurance/quality control (QA/QC) procedures in drug procurement is provided by the operation of the Global Drug Facility (GDF) of the Stop TB Partnership, the largest provider of tuberculosis (TB) medicines to the public sector worldwide.MethodsProcedures and results of GDF's quality assurance/quality control (QA/QC) over the five-year period 2013-2017 were analysed retrospectively. 13,999 batches of 51 different medicines had been procured and reviewed within this period. 1,388 of these batches had been analysed in the laboratories of GDF's external quality control agent (QCA). Assay and dissolution results determined by the manufacturers and by the external QCA were compared using Bland-Altman analysis.ResultsAll investigated batches of medicines were in specifications at the time of shipment. The costs for QA/QC were 0.8% of purchase costs. The median time required for chemical analysis was 10 working days. Comparison of the medicine quality analysis results showed for the poorly water-soluble compound rifampicin a bias of 4.4%, with the manufacturers reporting higher values than the external QCA, most likely due to different methods employed for the analysis. Overall 95% limits of agreement (LOAs) were -6.7 to +8.0% for assay, and -10.1 to +11.8% for dissolution. In case of kanamycin injections, 95% LOAs for assay reached -14.5 to +13.2%, largely attributable to samples from one manufacturer who had used a microbiological assay while the external QCA had used an HPLC assay.ConclusionsGDF's procedures represent a useful benchmark when evaluating QA/QC procedures of other medicine procurement operations. Inter-laboratory comparison using Bland-Altman plots allows to investigate bias and variability in medicine quality control and should be considered as a routine procedure by drug procurement agencies, to identify priorities for further improvements.

Substandard and falsified medicines represent a serious threat for public health and patient safety. Especially in low and middle-income countries, the prevalence of substandard and falsified medicines is reportedly high. However, reliable information on the prevalence of poor-quality medicines is scarce. In this study, 12 essential medicines, including antibiotics, antidiabetics, cardiac drugs and antiasthmatic drugs, were collected from six informal vendors and six licensed pharmacies in the southern part of Togo (regions Maritime and Plateaux). A mystery shopper approach was used in both types of outlets. In total, 64 samples were collected from licensed pharmacies and 30 from informal vendors. Both availability of medicines and prices of medicines were higher in licensed pharmacies than in informal vendors. 92 medicine samples were analyzed by visual examination, followed by chemical analysis for the content and for the dissolution of the active pharmaceutical ingredients according to the respective monographs of the United States Pharmacopoeia. 7 samples (8%) did not comply with the pharmacopoeial specifications, and one sample (1%) showed even extreme deviations. None of the samples was obviously falsified. However, one sample of amoxicillin capsules contained only 47% of the declared content of the active pharmaceutical ingredient, indicating that it may represent amoxicillin capsules 250 mg, rather than 500mg as declared on the label. Medicines stated to originate from Asia (i.e. mainly from India and China) showed a significantly higher proportion (24%) of non-compliant samples than those from Africa and Europe (4%, p = 0.007). High failure rates were observed in medicines both from informal vendors (13%) and from licensed pharmacies (5%), but the difference between both groups was not statistically significant (p = 0.152). The observed high prevalence of substandard medicines requires action from regulatory authorities and health care providers. Testing of selected samples for related substances indicated that inappropriate transport and storage conditions may have been an important cause for substandard quality.

BACKGROUND:Availability and affordability of medicines are key determinants of universal health coverage, yet achieving them presents a major challenge especially in low-income countries. We here present an analysis of availability and prices of antimalarial and antibiotic medicines in public, faith-based and private health facilities in Malawi. Medicines are provided free of charge in the public health care system of Malawi. In contrast, facilities of the Christian Health Association of Malawi (CHAM) usually charge their patients for medicines, as do private for-profit facilities. METHODS:As part of a study on medicine quality, samples of six antimalarial and six antibiotic medicines were collected in 31 health facilities in four districts of southern Malawi. These included 15 public facilities (i.e. health centres, district hospitals and central hospitals), eight CHAM and eight private facilities. Random selection was used in choosing the included health facilities. The availability of medicines was recorded, including the number of units which could be collected of each medicine, as well as the prices of medicines which were charged in CHAM and private facilities. These data were analyzed using the standard methodology developed by the World Health Organization (WHO) and Health Action International (HAI). RESULTS:Availability of the antimalarials artemether/lumefantrine and sulfadoxine/pyrimethamine, which are provided with financial support from international donors, was high in public and CHAM facilities (93% and 100%, respectively). However, availability of antibiotics was much lower (e.g. 40% availability of amoxicillin tablets/capsules in public health centres). Medicine prices were lower than reported from many other countries. The median price ratio (MPR) to a wholesale international procurement price was 2.8 in CHAM facilities and even lower in the private sector (MPR 2.3). Nevertheless, for 10 of the 12 investigated medicines the cost for one course of treatment exceeded the daily wage of a low-paid government worker in Malawi and therefore had to be considered as unaffordable for a major part of the population. CONCLUSIONS:Continued efforts are required to improve the availability of essential medicines in Malawi. The free provision of medicines in the public health care system remains important in order to achieve universal health coverage, due to the low income in this country.

BACKGROUND:Substandard and falsified medical products present a serious threat to public health, especially in low- and middle-income countries. Their identification using pharmacopeial analysis is expensive and requires sophisticated equipment and highly trained personnel. Simple, low-cost technologies are required in addition to full pharmacopeial analysis in order to accomplish widespread routine surveillance for poor-quality medicines in low- and middle-income countries. METHODS:Ten faith-based drug supply organizations in seven countries of Africa and Asia were each equipped with a Minilab of the Global Pharma Health Fund (GPHF, Frankfurt, Germany), suitable for the analysis of about 85 different essential medicines by thin-layer chromatography. Each organization was asked to collect approximately 100 medicine samples from private local medicine outlets, especially from the informal sector. The medicine samples were tested locally according to the Minilab protocols. Medicines which failed Minilab testing were subjected to confirmatory analysis in a WHO-prequalified medicine quality control laboratory in Kenya. RESULTS:Out of 869 medicine samples, 21 were confirmed to be substandard or falsified medical products. Twelve did not contain the stated active pharmaceutical ingredient (API), six contained insufficient amounts of the API, and three showed insufficient dissolution of the API. The highest proportion of substandard and falsified medicines was found in Cameroon (7.1%), followed by the Democratic Republic of Congo (2.7%) and Nigeria (1.1%). Antimalarial medicines were most frequently found to be substandard or falsified (9.5% of all antimalarials). Thin-layer chromatography according to the Minilab protocols was found to be specific and reproducible in the identification of medicines which did not contain the stated API. Since only samples which failed Minilab testing were subjected to confirmatory testing using pharmacopeial methods, this study did not assess the sensitivity of the Minilab methodology in the detection of substandard medicines, and may underestimate the prevalence of poor-quality medicines. CONCLUSIONS:Surveillance for poor-quality medicines can be carried out by local organizations in low- and middle-income countries using a simple, low-cost technology. Such surveillance can identify an important subgroup of the circulating substandard and falsified medical products and can help to prevent them from causing harm in patients. A collaboration of the national drug regulatory authorities with faith-based organizations and other NGOs may therefore represent a promising strategy towards the Sustainable Development Goal of "ensuring access to quality medicines".

The biosynthetic gene cluster for endophenazines, i.e., prenylated phenazines from Streptomyces anulatus 9663, was heterologously expressed in several engineered host strains derived from Streptomyces coelicolor M145. The highest production levels were obtained in strain M512. Mutations in the rpoB and rpsL genes of the host, which result in increased production of other secondary metabolites, had no beneficial effect on the production of phenazines. The heterologous expression strains produced, besides the known phenazine compounds, a new prenylated phenazine, termed endophenazine E. The structure of endophenazine E was determined by high-resolution mass spectrometry and by one- and two-dimensional NMR spectroscopy. It represented a conjugate of endophenazine A (9-dimethylallylphenazine-1-carboxylic acid) and L-glutamine (L-Gln), with the carboxyl group of endophenazine A forming an amide bond to the α-amino group of L-Gln. Gene inactivation experiments in the gene cluster proved that ppzM codes for a phenazine N-methyltransferase. The gene ppzV apparently represents a new type of TetR-family regulator, specifically controlling the prenylation in endophenazine biosynthesis. The gene ppzY codes for a LysR-type regulator and most likely controls the biosynthesis of the phenazine core. A further putative transcriptional regulator is located in the vicinity of the cluster, but was found not to be required for phenazine or endophenazine formation. This is the first investigation of the regulatory genes of phenazine biosynthesis in Streptomyces.

Terpenoids are arguably the largest and most diverse family of natural products, featuring prominently in e.g. signalling, self-defence, UV-protection and electron transfer. Prenyltransferases are essential players in terpenoid and hybrid isoprenoid biosynthesis that install isoprene units on target molecules and thereby often modulate their bioactivity. In our search for new prenyltransferase biocatalysts we focused on the marine-derived Streptomyces sp. CNQ-509, a particularly rich source of meroterpenoid chemistry. Sequencing and analysis of the genome of Streptomyces sp. CNQ-509 revealed seven putative phenol/phenazine-specific ABBA prenyltransferases, and one putative indole-specific ABBA prenyltransferase. To elucidate the substrate specificity of the ABBA prenyltransferases and to learn about their role in secondary metabolism, CnqP1 -CnqP8 were produced in Escherichia coli and incubated with various aromatic and isoprenoid substrates. Five of the eight prenyltransferases displayed enzymatic activity. The efficient conversion of dihydroxynaphthalene derivatives by CnqP3 (encoded by AA958_24325) and the co-location of AA958_24325 with genes characteristic for the biosynthesis of THN (tetrahydroxynaphthalene)-derived natural products indicates that the enzyme is involved in the formation of debromomarinone or other naphthoquinone-derived meroterpenoids. Moreover, CnqP3 showed high flexibility towards a range of aromatic and isoprenoid substrates and thus represents an interesting new tool for biocatalytic applications.

Recently, novel prenylated derivatives of 1,6-dihydroxyphenazine have been isolated from the marine sponge-associated Streptomyces sp. SpC080624SC-11. Genome sequencing of this strain now revealed a gene cluster containing all genes necessary for the synthesis of the phenazine and the isoprenoid moieties. Unexpectedly, however, the cluster did not contain a gene with similarity to previously investigated phenazine prenyltransferases, but instead a gene with modest similarity to the membrane-bound prenyltransferases of ubiquinone and menaquinone biosynthesis. Expression of this gene in E. coli and isolation of the membrane fraction proved that the encoded enzyme, Mpz10, catalyzes two successive prenylations of 1,6-dihydroxyphenazine. Mpz10 is the first example of a membrane-bound enzyme catalyzing the prenylation of a phenazine substrate, and one of few examples of membrane-bound enzymes involved in the prenylation of aromatic secondary metabolites in microorganisms.

We describe a procedure for the conjugative transfer of phage P1-derived Artificial Chromosome (PAC) library clones containing large natural product gene clusters (≥70 kilobases) to Streptomyces coelicolor strains that have been engineered for improved heterologous production of natural products. This approach is demonstrated using the gene cluster for FK506 (tacrolimus), a clinically important immunosuppressant of high commercial value. The entire 83.5 kb FK506 gene cluster from Streptomyces tsukubaensis NRRL 18488 present in one 130 kb PAC clone was introduced into four different S. coelicolor derivatives and all produced FK506 and smaller amounts of the related compound FK520. FK506 yields were increased by approximately five-fold (from 1.2 mg L(-1) to 5.5 mg L(-1)) in S. coelicolor M1146 containing the FK506 PAC upon over-expression of the FK506 LuxR regulatory gene fkbN. The PAC-based gene cluster conjugation methodology described here provides a tractable means to evaluate and manipulate FK506 biosynthesis and is readily applicable to other large gene clusters encoding natural products of interest to medicine, agriculture and biotechnology.

The bacterium Micromonospora sp. RV115, isolated from a marine sponge, produces the unusual metabolite diazepinomicin, a prenylated benzodiazepine derivative. We have cloned the prenyltransferase gene dzmP from this organism, expressed it in Escherichia coli, and the resulting His8-tagged protein was purified and investigated biochemically. It was found to catalyze the farnesylation of the amide nitrogen of dibenzodiazepinone. DzmP belongs to the ABBA prenyltransferases and is the first member of this superfamily which utilizes farnesyl diphosphate as genuine substrate. All previously discovered members utilize either dimethylallyl diphosphate (C5) or geranyl diphosphate (C10). Another putative diazepinomicin biosynthetic gene cluster was identified in the genome of Streptomyces griseoflavus Tü4000, suggesting that the formation of diazepinomicin is not restricted to the genus Micromonospora. The gene cluster contains a gene ssrg_00986 with 61.4% identity (amino acid level) to dzmP. The gene was expressed in E. coli, and the purified protein showed similar catalytic properties as DzmP. Both enzymes also accepted other phenolic or phenazine substrates. ABBA prenyltransferases are useful tools for chemoenzymatic synthesis, due to their nature as soluble, stable biocatalysts. The discovery of DzmP and Ssrg_00986 extends the isoprenoid substrate range of this superfamily. The observed prenylation of an amide nitrogen is an unusual biochemical reaction.

Prenyltransferases (PTs) catalyze the regioselective transfer of prenyl moieties onto aromatic substrates in biosynthetic pathways of microbial secondary metabolites. Therefore, these enzymes contribute to the chemical diversity of natural products. Prenylation is frequently essential for the pharmacological properties of these metabolites, including their antibiotic and antitumor activities. Recently, the first phenazine PTs, termed EpzP and PpzP, were isolated and biochemically characterized. The two enzymes play a central role in the biosynthesis of endophenazines by catalyzing the regiospecific prenylation of 5,10-dihydrophenazine-1-carboxylic acid (dhPCA) in the secondary metabolism of two different Streptomyces strains. Here we report crystal structures of EpzP in its unliganded state as well as bound to S-thiolodiphosphate (SPP), thus defining the first three-dimensional structures for any phenazine PT. A model of a ternary complex resulted from in silico modeling of dhPCA and site-directed mutagenesis. The structural analysis provides detailed insight into the likely mechanism of phenazine prenylation. The catalytic mechanism suggested by the structure identifies amino acids that are required for catalysis. Inspection of the structures and the model of the ternary complex furthermore allowed us to rationally engineer EpzP variants with up to 14-fold higher catalytic reaction rate compared to the wild-type enzyme. This study therefore provides a solid foundation for additional enzyme modifications that should result in efficient, tailor-made biocatalysts for phenazines production.

The linkage of isoprenoid and aromatic moieties, catalyzed by aromatic prenyltransferases (PTases), leads to an impressive diversity of primary and secondary metabolites, including important pharmaceuticals and toxins. A few years ago, a hydroxynaphthalene PTase, NphB, featuring a novel ten-stranded β-barrel fold was identified in Streptomyces sp. strain CL190. This fold, termed the PT-barrel, is formed of five tandem ααββ structural repeats and remained exclusive to the NphB family until its recent discovery in the DMATS family of indole PTases. Members of these two families exist only in fungi and bacteria, and all of them appear to catalyze the prenylation of aromatic substrates involved in secondary metabolism. Sequence comparisons using PSI-BLAST do not yield matches between these two families, suggesting that they may have converged upon the same fold independently. However, we now provide evidence for a common ancestry for the NphB and DMATS families of PTases. We also identify sequence repeats that coincide with the structural repeats in proteins belonging to these two families. Therefore we propose that the PT-barrel arose by amplification of an ancestral ααββ module. In view of their homology and their similarities in structure and function, we propose to group the NphB and DMATS families together into a single superfamily, the PT-barrel superfamily.

Covering: up to 2009 [ABSTRACT FROM AUTHOR]