Search

Abstract Traditional antifouling agents usually have a certain toxic effect on marine environments and non-target organisms. In this study, Dictyophora indusiata polysaccharide (DIP) was applied as a natural antifouling surface modifier to prepare the surface coating for marine antifouling. Three DIP coatings were prepared: D. indusiata spore polysaccharide (DISP), D. indusiata volva polysaccharide (DIVP), and D. indusiata embryonic body polysaccharide (DIEP). The antifouling, tribological, and anticorrosion behavior of the coatings were examined. Results revealed that the three kinds of DIP coatings had excellent antifouling properties, which could effectively prevent the adhesion of Chlorella and the attachment of water-based and oily stains on the surface. Additionally, the coatings showed great mechanical stability and could maintain an extremely low coefficient of friction (COF < 0.05) after continuous wear. The drag reduction rate of the coated surfaces reached 5%, showing a powerful lubrication performance. Furthermore, the DIP coatings presented an outstanding corrosion resistance, where the equivalent circuit impedances were 4–9 orders of magnitude higher than the control groups. This research showed a promising prospect of surface coating fabrication with DIP for marine devices to achieve the purpose of antifouling and drag reduction.

Recently, chitosan has become attractive due to being biodegradable, biocompatible and renewable. However, the weak mechanical properties of chitosan films limit their large-scale application. In this work, a strategy of blending TEMPO, oxidized CNF (TOCN) and chitosan was developed to fabricate nanocomposite films in order to improve the mechanical properties and maintain biocompatibility. The TOCN/chitosan nanocomposite films exhibited excellent optical transmittance (>85%) and extremely high tensile strength of 235 MPa. The good compatibility of TOCN and chitosan chains, good dispersion of chitosan aggregates and the presence of stiff TOCN crystal domains are the main reasons for getting improved mechanical strength of composite films. The films showed good biocompatible properties based on the cell activity assay results. Furthermore, they were stable in PBS buffer for more than 6 months without significant degradation. The TOCN/chitosan nanocomposite films with these excellent properties could be employed in medical applications.

Ultraviolet (UV) sensors offer significant advantages in human health protection and environmental pollution monitoring. Amongst various materials for UV sensors, the zinc oxide (ZnO) nanostructure is considered as one of the most promising candidates due to its incredible electrical, optical, biomedical, energetic and preparing properties. Compared to other fabricating techniques, hydrothermal synthesis has been proven to show special advantages such as economic cost, low-temperature process and excellent and high-yield production. Here, we summarize the latest progress in research about the hydrothermal synthesis of ZnO nanostructures for UV sensing. We particularly focus on the selective hydrothermal processes and reveal the effect of key factors/parameters on ZnO architectures, such as the laser power source, temperature, growth time, precursor, seeding solution and bases. Furthermore, ZnO hydrothermal nanostructures for UV applications as well as their mechanisms are also summarized. This review will therefore enlighten future ideas of low-temperature and low-cost ZnO-based UV sensors.

Due to their bioinert and reliable tribological performance, cobalt chromium molybdenum (CoCrMo) alloys have been widely used for articular joint implant applications. However, friction and wear issues are still the main reasons for the failure of implants. As a result, the improvement of the tribological properties and biocompatibility of these alloys is still needed. Thus, surface modification is of great interest for implant manufacturers and for clinical applications. In this study, a strategy combining laser surface texturing and chitosan grafting (mussel inspired) was used to improve the tribological and biocompatible behaviors of CoCrMo. The microstructure and chemical composition were investigated by atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy, respectively. The tribological properties were discussed to determine their synergistic effects. To evaluate their biocompatibility, osteoblast cells were cocultured with the modified surface. The results show that there is a distinct synergistic effect between laser surface texturing and polymer brushes for improving tribological behaviors and biocompatibility. The prepared chitosan brushes on a textured surface are a strong mechanism for reducing friction force. The dimples took part in the hydrodynamic lubrication and acted as the container for replenishing the consumed lubricants. These brushes also promote the formation of a local lubricating film. The wear resistance of the chitosan brushes was immensely improved. Further, the worn process was observed, and the mechanism of destruction was demonstrated. Co-culturing with osteoblast cells showed that the texture and grafting have potential applications in enhancing the differentiation and orientation of osteoblast cells.

To improve the drag-reducing and antifouling performance of marine equipment, it is indispensable to learn from structures and materials that are found in nature. This is due to their excellent properties, such as intelligence, microminiaturization, hierarchical assembly, and adaptability. Considerable interest has arisen in fabricating surfaces with various types of biomimetic structures, which exhibit promising and synergistic performances similar to living organisms. In this study, a dual bio-inspired shark-skin and lotus-structure (BSLS) surface was developed for fabrication on commercial polyurethane (PU) polymer. Firstly, the shark-skin pattern was transferred on the PU by microcasting. Secondly, hierarchical micro- and nanostructures were introduced by spraying mesoporous silica nanospheres (MSNs). The dual biomimetic substrates were characterized by scanning electron microscopy, water contact angle characterization, antifouling, self-cleaning, and water flow impacting experiments. The results revealed that the BSLS surface exhibited dual biomimetic features. The micro- and nano-lotus-like structures were localized on a replicated shark dermal denticle. A contact angle of 147° was observed on the dual-treated surface and the contact angle hysteresis was decreased by 20% compared with that of the nontreated surface. Fluid drag was determined with shear stress measurements and a drag reduction of 36.7% was found for the biomimetic surface. With continuous impacting of high-speed water for up to 10 h, the biomimetic surface stayed superhydrophobic. Material properties such as inhibition of protein adsorption, mechanical robustness, and self-cleaning performances were evaluated, and the data indicated these behaviors were significantly improved. The mechanisms of drag reduction and self-cleaning are discussed. Our results indicate that this method is a potential strategy for efficient drag reduction and antifouling capabilities.