Search

Fermentation with Weissella confusa A16 could improve the flavor of various plant-based sources. However, less is known about the influence of fermentation conditions on the profile of volatile compounds, dextran synthesis and acidity. The present work investigates the synthesis of potential flavor-active volatile compounds, dextran, acetic acid, and lactic acid, as well as the changes in viscosity, pH, and total titratable acidity, during fermentation of faba bean protein concentrate with W. confusa A16. A Response Surface Methodology was applied to study the effect of time, temperature, dough yield, and inoculum ratio on the aforementioned responses. Twenty-nine fermentations were carried out using a Central Composite Face design. A total of 39 volatile organic compounds were identified: 2 organic acids, 7 alcohols, 8 aldehydes, 2 alkanes, 12 esters, 3 ketones, 2 aromatic compounds, and 3 terpenes. Long fermentation time and high temperature caused the formation of ethanol and ethyl acetate and the reduction of hexanal, among other compounds linked to the beany flavor. Levels of dextran, acetic acid, and lactic acid increased with increasing temperature, time, and dough yield. Optimal points set for increased dextran and reduced acidity were found at low temperatures and high dough yield. Such conditions would result in hexanal, ethyl acetate and ethanol having a relative peak area of 35.9%, 7.4%, and 4.9%, respectively. [ABSTRACT FROM AUTHOR]

The application of cross-modal interaction is a potential strategy to tackle the challenges related to poor sensory properties, such as thin mouthfeel, in plant-based yogurts. Thus, we aim to study the influence of aroma compounds possibly congruent with sweetness on the perceived sensory profile. Descriptive analysis and temporal dominance of sensations (n = 10 × 4) with a trained panel were conducted with and without a nose clip. One unflavored sample and samples flavored with either lemon or vanilla aromas were included (vanilla; 0.05%; 0.1%; lemon: 0.025%; 0.05%). Odor intensity, thick, sticky, and melting sensation, sweetness, and grain-like flavor were evaluated on an unstructured 10-cm line scale with anchors and reference samples. The results demonstrate how vanilla and lemon aromas suppressed grain-like flavor and enhanced odor intensity and sweetness. The following order was detected among samples in perceived sweetness intensity: unflavored < lemon < vanilla. The two sessions with and without nose clip differed statistically in sweetness, highlighting that the aromas impacted the perceived sweetness but not the mouthfeel in vanilla samples. The study suggests that congruent aromas could modify the perceived sweetness in plant-based yogurts; however, aroma or perceived sweetness does not impact the mouthfeel in plant-based yogurts. While the odor–taste interaction in such products is evident, the study highlights that aroma compounds alone do not modify mouthfeel. [ABSTRACT FROM AUTHOR]

Wheat is a well-known source of B vitamins but also contains significant amounts of vitamin E and related tocols, which have a number of positive health benefits. However, there are no reports on increasing the tocol content of wheat. A prerequisite for increasing the tocol content is the identification of variation in its amount within wheat and related cereals. We therefore determined the tocol content and composition in the grain of 230 recombinant inbred lines (RILs) of a diverse biparental wheat population (Mv Toborzó/Tommi), showing variation in the total content from 13.69 to 45.18 μg/g d.m. The total content also showed transgressive segregation in the population. The effect of the genotype on the variance components of tocols was studied, and the broad-sense heritability was calculated to be 0.71. The lines were also grouped based on their tocol content and analyzed for their chemical composition and breadmaking quality. The high heritability value and the wide variation found in the total amount indicate that increasing the content of tocols is a possible breeding strategy. [ABSTRACT FROM AUTHOR]

Demand for plant‐based meat alternatives has increased in recent years due to concerns about health, ethics, the environment, and animal welfare. Nevertheless, the market share of plant‐based meat alternatives must increase significantly if they are to support sustainable food production and consumption. Flavor is an important limiting factor of the acceptability and marketability of plant‐based meat alternatives. Undesirable chemosensory perceptions, such as a beany flavor, bitter taste, and astringency, are often associated with plant proteins and products that use them. This study reviewed 276 articles to answer the following five research questions: (1) What are the volatile and nonvolatile compounds responsible for off‐flavors? (2) What are the mechanisms by which these flavor compounds are generated? (3) What is the influence of thermal extrusion cooking (the primary structuring technique to transform plant proteins into fibrous products that resemble meat in texture) on the flavor characteristics of plant proteins? (4) What techniques are used in measuring the flavor properties of plant‐based proteins and products? (5) What strategies can be used to reduce off‐flavors and improve the sensory appeal of plant‐based meat alternatives? This article comprehensively discusses, for the first time, the flavor issues of plant‐based meat alternatives and the technologies available to improve flavor and, ultimately, acceptability. [ABSTRACT FROM AUTHOR]

• Eugenol (E) was efficiently encapsulated by spray-drying using WP or LE. • Chitosan incorporation reduced the emulsion stability and encapsulation efficiency. • A fast release of E in different food simulants was observed for every encapsulant. • Antioxidant capacity was coherent with the E content inside the powder particles. • Antimicrobial effect (E. coli and L. innocua) was coherent with the powder E content. The encapsulation of eugenol (E) by spray-drying using whey protein (WP) or soy lecithin (LE) and maltodextrin in combination with oleic acid (OA) and chitosan (CH) was analysed in order to obtain antioxidant and antimicrobial powders for food applications. Formulations with only WP or LE showed higher encapsulation efficiencies (EE) (95–98%) and antibacterial effect against E. coli and L. innocua due to their greater E load. Incorporation of OA or CH promoted lower EE, which negatively affected the antimicrobial and antioxidant activities of the powders. Furthermore, the addition of CH implied less thermal protection against the E losses. The eugenol release was not notably affected by pH or polarity of the food simulant, but the release rate significantly decreased when incorporating OA and CH. The E-LE formulations better retained the eugenol than E-WP powders when heated above 200 °C, this being relevant for the powder inclusion in thermally treated products. [ABSTRACT FROM AUTHOR]

Lard from pork back fat was dry fractionated based on crystallization temperature, resulting in fractions with a ratio of saturated to unsaturated fatty acids of 1.10 and 0.61. Lean minced pork was mixed with the saturated and unsaturated fat fraction and stored in modified atmosphere (80% O 2 and 20% CO 2 ) at 5 °C for 2, 5, 7, 9, and 12 days under light to investigate the effect on oxidative stability of lipids and proteins. The saturated fat group developed higher TBARS values and lower levels of free thiol groups during storage, indicating that the unsaturated fat fraction in minced pork promoted increased oxidative stability of both lipids and proteins. A higher content of α-tocopherol in the unsaturated fat fraction suggests that the differences in oxidative stability is causatively linked to the balance between the fatty acid composition and content of antioxidants. The TBARS values and free thiol content were negatively correlated, suggesting a relationship between lipid and protein oxidation. [ABSTRACT FROM AUTHOR]

Kañiwa ( Chenopodium pallidicaule) and lupine ( Lupinus angustifolius) are good gluten-free sources of protein and fiber. The effect of various contents of kañiwa or lupine flour on physical and chemical properties of extruded snacks was investigated. Grain type (kañiwa or lupine), content of kañiwa or lupine flour (20-50% of solids), temperature of die (140-160°C), screw speed (200-500 rpm) and WCM (14-18%) as well as content of protein, ash, fiber and main fatty acids of blend were the predictors in the PLSR model 1. SEI decreased with increasing WCM and content protein and fiber of blend, and increased with increasing screw speed. The stiffness of extrudates containing kañiwa or lupine increased with decreasing screw speed, and increased with increasing WCM, and content of protein and fiber of blend. Extrudates with higher content of kañiwa or lupine presented higher retention of fatty acids and tocopherols while the content of total phenolic compounds and folate was comparable to that of unprocessed flour blends according to PLSR model 2. This study showed that extrudates containing up to 50% kañiwa and at most 20% lupine of solids can maintain high SEI as well as added nutritional value. This study applied successfully PLSR to study the incorporation of kañiwa and lupine to corn-based extrudates. Practical Applications Up to 50% kañiwa and 20% lupine can be successfully added to expanded corn-based extrudates, thereby increasing the overall content of protein and fiber compared to pure corn extrudates. Extrusion had a minor effect on total phenolic compounds and folate, meaning that some of the nutritional value conferred by kañiwa or lupine was not lost under the conditions tested. Kañiwa, in particular, could have an outstanding potential for the development of gluten-free extruded snacks. Partial Least Squares modeling was a formidable tool to predict the effect of material and process variables on the physical and chemical characteristics of extruded snacks, thus giving valuable information for product development [ABSTRACT FROM AUTHOR]

The effects of amaranth and quinoa supplements and extrusion-cooking on the physical properties and chemical composition of corn-based extrudates were investigated by using PLSR and L-PLSR. Grain type, content of amaranth or quinoa flour (20-50% of solids of blend), temperature of die (140-160°C), screw speed (200-500 rpm), water content of mixture (14-18%) as well as contents of protein, ash, dietary fiber and main fatty acids of blend were the predictors in the PLSR and L-PLSR. Water content of mixture and screw speed had the distinctly greatest importance for physical response variables such as torque and pressure at the die during extrusion, SEI, stiffness and water content of extrudate. Extrusion reduced the content of fatty acids and tocopherols in the solids but it had only a slight effect on the content of total phenolic compounds and folate. This study proved that extrudates containing up to 50% amaranth or quinoa can maintain some key physical properties (e.g., high SEI, low stiffness) and the added nutritional value (e.g., increased content of folate). This study applied successfully PLSR and L-PLSR modeling techniques to study the incorporation of amaranth and quinoa to corn-based snacks. Practical Applications It was possible to add up to 50% amaranth and quinoa and still, obtain expanded corn-based extrudates. The incorporation of these grains increased the nutritional value of corn-based extrudates, having little effect on their expansion and stiffness. Amaranth and quinoa could have a tremendous potential for the development of gluten-free extruded snacks. [ABSTRACT FROM AUTHOR]

BACKGROUND Boreal cropping systems are heavily focused on the production of small-grain cereals; to improve their resilience to climate change and to achieve food and feed security, diversification is needed. This study investigated the potential of faba bean, narrow-leafed lupin and lentil as protein crops in southern Finland, where faba bean is traditional but the other two are novel. RESULTS Early cultivars of narrow-leafed lupin and lentil matured adequately. Protein concentration in faba bean was, at 32%, higher than the world average of 29%, while those of narrow-leafed lupin and lentil were close to their world averages. Protein yields decreased in the order faba bean > narrow-leafed lupin > lentil. Lipid content of faba bean and lentil was about 1.2% and that of narrow-leafed lupin about 5.5%, and fatty acid composition was largely oleic and linoleic in all three species. CONCLUSION Both lentil and narrow-leafed lupin can be added to the range of feed and food crops produced at high latitudes in Europe. While faba bean produces the greatest protein yield and lysine concentration, the higher sulfur amino acid concentration in lupin, its oil content and its adaptation to acid, sandy soils not suitable for faba bean make it an attractive alternative. © 2014 Society of Chemical Industry [ABSTRACT FROM AUTHOR]