Search

We report on the transformation of dichloromethane to low-chlorine carbon nanoparticles by the exposure of aqueous dichloromethane solution and/or dichloromethane/water biphasic solution to femtosecond laser pulses. The pH of either solution immediately decreased due to the reduction of dichloromethane by hydrated electrons. The time evolution of transmittance revealed that particle formation was suppressed when the initial pH was low because protons scavenge hydrated electrons. The size and morphology of nanoparticles was independent of the initial pH and the reaction solution used. The analysis of the elemental composition of carbon particles showed that the Cl/C atomic ratio was, independent on the initial pH values, greatly reduced to 0.06. We propose that the violent destruction of dichloromethane and elimination of chlorine atoms not only as Cl − but also Cl 2 excludes chlorine atoms from the carbon network construction processes toward the formation of carbon nanoparticles.

有機溶媒(ヘキサフロロベンゼン)にフェムト秒レーザーを照射することで、フッ素原子を含んだ炭素ナノ粒子(約50nm)を極めて簡便に合成することに成功しました。通常のフッ素導入法とは異なり、本手法では加熱の必要がなく室温で実施可能です。また、反応溶液を不活性ガスで保護するなどの特別な処置は不要であり、空気が存在しても反応が起こります。さらに、水が過剰に存在する条件でも粒子が生成されます。……(参照 LINK1), We report on the preparation and characterization of fluorine-doped hydrophilic carbon nanoparticles by the exposure of hexafluorobenzene or a water/hexafluorobenzene bilayer solution to femtosecond laser pulses. Uniform atom distributions were achieved not only on the particle surface but also inside the particles....

Integration of the preparation of arylboronic esters via aryllithiums and Suzuki–Miyaura coupling using monolithic Pd catalyst without an intentionally added base was achieved. A continuous operation has been done successfully for over 21 hours.

The surfaces of polyethylene naphthalate and polyethylene terephthalate films were modified by plasma treatment, layer-by-layer (LbL) assembly of polyelectrolyte multilayer thin films and subsequent deposition of SiO2 particles. Plasma treatment rendered the film surfaces hydrophilic and led to the formation of fibrillar patterns. The plasma-treated film surfaces were compatible with multilayers acquired via LbL assembly, and the outer adsorbed polyelectrolyte layer determined the charge of the multilayer surfaces. Negatively charged SiO2 particles were adsorbed to the positively charged surface of the multilayers. This process is potentially applicable to surface modifications of polymer materials by charged compounds.

In this manuscript, we present the hybrid materials with sulfur as an inorganic element. Initially, the network polymers with the polysulfide-bridged polyhedral oligomeric silsesquioxane were synthesized and mixed with polystyrene and poly(methyl methacrylate). The resulting polymer blends showed higher thermal degradation temperatures than that of the polymer matrix similarly as typical hybrids. Next, it was found that the sulfur-bridging networks can increase refractive indices of the polymer matrices. Moreover, it was revealed that the loss of Abbe numbers was hardly observed by blending to conventional polymers.

The performance of a fast pixel array detector with a grid mask resolution enhancer has been demonstrated for X-ray photon correlation spectroscopy experiments., The performance of a fast pixel array detector with a grid mask resolution enhancer has been demonstrated for X-ray photon correlation spectroscopy (XPCS) measurements to investigate fast dynamics on a microscopic scale. A detecting system, in which each pixel of a single-photon-counting pixel array detector, PILATUS, is covered by grid mask apertures, was constructed for XPCS measurements of silica nanoparticles in polymer melts. The experimental results are confirmed to be consistent by comparison with other independent experiments. By applying this method, XPCS measurements can be carried out by customizing the hole size of the grid mask to suit the experimental conditions, such as beam size, detector size and sample-to-detector distance.

The authors described a region-selective immobilization methods of bacteria by using superhydrophobic/superhydrophilic and superhydrophobic/poly(ethylene glycol) (PEG) micropatterns for culture scaffold templates. In the case of superhydrophobic/superhydrophilic micropatterns, the superhydrophobic surface was prepared first by microwave-plasma enhanced chemical vapor deposition (MPECVD) from trimethylmethoxysilane. Then the superhydrophilic regions were fabricated by irradiating the superhydrophobic surface with vuv light through a stencil mask. In the case of the superhydrophobic/PEG micropatterned surfaces, PEG surfaces were fabricated first by chemical reaction of ester groups of p-nitrophenyl PEG with NH2 group of NH2-terminated self assembled monolayer from n-6-hexyl-3-aminopropyltrimethoxysilane. The superhydrophobic regions were fabricated by MPECVD thorough a stencil mask. In this study four bacteria were selected from viewpoint of peptidoglycan cell wall (E. coli versus B. subtilis), extracellular polysaccharide (E.coli versus P. stutzeri, P. aeruginosa), and growth rate (P. stutzeri versus P. aeruginosa). The former micropattern brought discrete adhesions of E. coli and B. subtilis specifically on the hydrophobic regions, Furthermore, using the superhydrophobic/PEG micropattern, adhesion of bacteria expanded for E. coli, B. subtilis, P. stutzeri, and P. aeruginosa. They observed a high bacterial adhesion onto superhydrophobic surfaces and the inhibitive effect of bacterial adhesion on PEG surfaces.

In order to improve the energy-conversion efficiency in fuel cells, the authors loaded Pt nanoparticles on carbon nanoballs (CNBs) by using solution plasma processing (SPP) involving CNB and Pt ion with a protection group. In this study, we employed poly(vinylpyrrolidone) (PVP) or sodium dodecyl sulfate (SDS) to prepare Pt nanoparticles supported on CNB (Pt/CNB) by the SPP, and the electrochemical properties as a catalyst was evaluated by cyclic voltammetry. The carbon nanoballs were prepared by thermal decomposition process of ethylene and hydrogen gases. Color of the solution changed from yellow to dark brown as synthesis time. This change indicates the improvement of dispersibility of CNB. Moreover, transmission electron microscopy images and elemental mapping images showed the Pt nanoparticles supported on CNB. A catalytic activity of the Pt/CNB in use of SDS was shown to be higher than the Pt/CNB prepared with PVP system. The SDS-containing Pt/CNB also showed the higher activity than that obtained by the conventional method.

Gold nanorods protected by hexadecyltrimethylammonium bromide were treated by an organosilane, aminopropyltriethoxysilane (APS) or vinyltrimethoxysilane (VS) in the presence of mercaptopropyltrimet...

Hydrophobic gold nanorods were fabricated from hydrophilic gold nanorods coated with hexadecyltrimethylammonium bromide by treating with mercaptopropyltrimethoxysilane (MPS) and subsequently octadecyltrimethoxysilane (ODS). The fabrication of the hydrophobic shell went through the process of (1) binding MPS onto the nanorods, (2) hydrolysis of methoxysilanes, and (3) immobilization of ODS by dehydration condensation. The 2- or 3-D ordered structures of hydrophobic nanorods were self-assembled by the evaporation of solvent on a substrate. The aspects of 2-D assemblies were dependent on the concentration of the nanorods, as was seen in transmission electron microscopic images. At a low concentration, the nanorods assembled parallel to the substrate, whereas they stood on the substrate at a high concentration. On the other hand, in a solid of the gold nanorods, the formation of the 3-D assembly was confirmed by small-angle X-ray scattering. The assembly consisted of hexagonal arrays of the gold nanorods and their lamellar accumulation.

Thin functional organic films on a gold substrate were fabricated by adsorbing tetrakis(carboxyphenyl)porphyrin (TCPP) on a spacer layer, which was prepared by the layer-by-layer adsorption of a dendrimer and a linear polymer. The thickness and photoluminescence of the films were investigated by surface plasmon resonance and surface plasmon fluorescence techniques, respectively. TCPP adsorbed on the spacer layer in aqueous solutions of different ionic strengths resulted in a thick TCPP adlayer at high ionic strength and a shrunk spacer layer at low ionic strength. The fluorescence was quenched at high ionic strength but could be observed at low ionic strength. The effects are explained by the states of dye aggregation. This study shows the control of energy transfer from a metal surface to a dye layer by changing the dye adlayer. It can contribute to the development of molecular devices involving energy-transfer systems.