Search

Oleogels, which are traditionally utilized to reduce saturated and trans fats in bakery foods, have recently shown promising applications in non-bakery foods, particularly in the enhancement of their food texture and cooking qualities. This study investigates the impact of incorporating stearic acid-containing candelilla wax–groundnut oil oleogel in various proportions on the production of whole wheat pasta. Five different pasta samples were prepared by replacing water with oleogels in varying concentrations (2.5%, 5%, 10%, and 15%), and their physicochemical attributes were evaluated using a range of analytical methods for both cooked and uncooked pasta (like microscopy, colorimetry, dimensional analysis, texture, cooking qualities, moisture content, and FTIR). Significant differences in width, thickness, and color properties were observed between the control sample (0% oleogel) and those containing oleogel, with notable variations in surface texture and color intensities, particularly with the higher oleogel content (p < 0.05). Cooked pasta exhibited lower L* values and higher a* values than uncooked pasta. Stereo zoom microscope and field emission scanning electron microscope (FESEM) micrographs demonstrated a change in the pasta surface topology and microstructures. Dark spots on the pasta with greater oleogel concentrations (samples with 10% and 15% oleogel replacement) suggest the formation of starch–lipid complexes. Cooking induced pore formation, which was more pronounced when the oleogel content was increased, impacted the water absorption capacity, swelling index, and moisture content. The cooked samples exhibited higher moisture content and improved polymer network stability compared to the uncooked ones, indicating the potential of oleogel incorporation to modulate pasta properties in a concentration-dependent manner. These findings underscore the versatility of oleogels when their applications are diversified in non-bakery foods to enhance food texture and quality. [ABSTRACT FROM AUTHOR]

The shelf life of whole wheat bread (WWB) significantly impacts its freshness and overall quality. This research investigated the impact of chitosan lactate (CL) on various characteristics influencing the shelf life of WWB, including its physical, chemical, textural, antimicrobial, and sensory attributes. These characteristics were evaluated by conducting various experiments such as physical inspection, moisture, impedance, swelling, color, texture, FTIR, microbiological, and sensory analysis. CL with different concentrations was incorporated into WWB formulations: P0.0 (0.0% w/w CL, control), P0.5 (0.5% w/w CL), P1.0 (1.0% w/w CL), P2.0 (2.0% w/w CL), and P3.0 (3.0% w/w CL). The inclusion of CL promoted the Maillard reaction (MR) compared to P0.0. The promotion of MR resulted in the formation of a shinier crust, which increased as the CL content was increased. P0.5 comprised large-sized pores and exhibited increased loaf height. CL-containing WWB formulations showed an increased moisture content and decreased impedance values compared to the control. FTIR analysis of P0.5 demonstrated the enhanced interaction and bonding of water molecules. P0.5 demonstrated optimal textural, colorimetric, and antimicrobial properties compared to other formulations. The sensory attributes of WWBs remain unchanged despite CL addition. In conclusion, P0.5 exhibited optimal characteristics associated with better quality and prolonged shelf life. [ABSTRACT FROM AUTHOR]

This study investigated the effects of incorporating stearic acid (SAC) in candelilla wax (CW) and groundnut oil (GO) oleogel with potential health benefits as an alternative to saturated fats in processed foods. Results showed that SAC possesses crystal habit-modifying properties on the oleogels, causing its average crystallite size to increase, as observed through polarized light microscopy and XRD analysis. Additionally, SAC caused an increase in ordering within the crystallite network as a result of the decrease in d-spacing. Interestingly, the firmness of the oleogels remained unaffected, even at a higher fraction of SAC. It is believed to be due to the interference caused by the crystallization of high-melting SAC within the fine crystal network of CW-GO oleogel. However, adding 3 mg of SAC significantly increased the work of the shear of the oleogel (SAC3), which decreased the spreadability. As observed through colorimetric analysis, SAC3 showed a dense and uniform distribution of prominent bright crystals with minimal amorphous regions, leading to a high whiteness index. SAC3 also demonstrated the highest compactness and dislocation density among the oleogels, likely due to the formation of prominent crystals. However, SAC did not affect the overall oleogel crystallization rate. SAC3 had delayed secondary crystallization and thermal equilibrium by having a prolonged crystallization time of CW crystals. In the case of controlled delivery studies, the addition of SAC improved CPCR. On the other hand, CPCR decreased with the increase in SAC amount, where SAC3 showed a moderate curcumin release ability among the oleogels. [ABSTRACT FROM AUTHOR]

Sunflower oil (SO) oleogel was initially prepared using 5 % (w/w) sunflower wax, hydrophobic (Span 80), or hydrophilic (Tween 80) emulsifiers. This study involved the physicochemical characterization of the batter and cake prepared through partial and complete replacement of butter with the oleogels. Batter and cake properties were improvised in T80, prepared with oleogel containing 0.015 % (w/w) of Tween 80. The polarized micrograph of the T80 batter displayed a large number of air bubbles stabilized by the wax crystals. Starch gelatinization was found highest in T80 batter and could be related to the ability of hydrophilic emulsifiers to form a complex with starch. The FTIR spectra in the T80 batter and cake displayed a reduced peak for gluten content. T80 cake crumb showed a homogenous distribution of smaller air cells supporting its softness. A reduction in the firmness and hardness of T80 was obtained from the texture studies. [ABSTRACT FROM AUTHOR]

The development of consumer-friendly nutraceutical dosage forms is highly important for greater acceptance. In this work, such dosage forms were prepared based on structured emulsions (emulgels), where the olive oil phase was filled within the pectin-based jelly candy. The emulgel-based candies were designed as bi-modal carriers, where oil-soluble curcumin and water-soluble riboflavin were incorporated as the model nutraceuticals. Initially, emulsions were prepared by homogenizing varied concentrations (10% to 30% (w/w)) of olive oil in a 5% (w/w) pectin solution that contained sucrose and citric acid. Herein, pectin acted as a structuring agent-cum-stabilizer. Physico–chemical properties of the developed formulations were thoroughly analyzed. These studies revealed that olive oil interferes with the formation of polymer networks of pectin and the crystallization properties of sugar in candies. This was confirmed by performing FTIR spectroscopy and DSC studies. In vitro disintegration studies showed an insignificant difference in the disintegration behavior of candies, although olive oil concentration was varied. Riboflavin and curcumin were then incorporated into the jelly candy formulations to analyze whether the developed formulations could deliver both hydrophilic and hydrophobic nutraceutical agents. We found that the developed jelly candy formulations were capable of delivering both types of nutraceutical agents. The outcome of the present study may open new directions for designing and developing oral nutraceutical dosage forms. [ABSTRACT FROM AUTHOR]