Search

Despite increasing emission controls, particulate matter (PM) has remained a critical issue for European air quality in recent years. The various sources of PM, both from primary particulate emissions as well as secondary formation from precursor gases, make this a complex problem to tackle. In order to allow for credible predictions of future concentrations under policy assumptions, a modelling approach is needed that considers all chemical processes and spatial dimensions involved, from long-range transport of pollution to local emissions in street canyons. Here we describe a modelling scheme which has been implemented in the GAINS integrated assessment model to assess compliance with PM10 (PM with aerodynamic diameter < 10 pm) limit values at individual air quality monitoring stations reporting to the Air-Base database. The modelling approach relies on a combination of bottom up modelling of emissions, simplified atmospheric chemistry and dispersion calculations, and a traffic increment calculation wherever applicable. At each monitoring station fulfilling a few data coverage criteria, measured concentrations in the base year 2009 are explained to the extent possible and then modelled for the past and future. More than 1850 monitoring stations are covered, including more than 300 traffic stations and 80 % of the stations which exceeded the EU air quality limit values in 2009. As a validation, we compare modelled trends in the period 2000-2008 to observations, which are well reproduced. The modelling scheme is applied here to quantify explicitly source contributions to ambient concentrations at several critical monitoring stations, displaying the differences in spatial origin and chemical composition of urban roadside PM10 across Europe. Furthermore, we analyse the predicted evolution of PM10 concentrations in the European Union until 2030 under different policy scenarios. Significant improvements in ambient PM10 concentrations are expected assuming successful implementation of already agreed legislation; however, these will not be large enough to ensure attainment of PM10 limit values in hot spot locations such as Southern Poland and major European cities. Remaining issues are largely eliminated in a scenario applying the best available emission control technologies to the maximal technically feasible extent. [ABSTRACT FROM AUTHOR]

NO2 concentrations at the street level are a major concern for urban air quality in Europe and have been regulated under the EU Thematic Strategy on Air Pollution. Despite the legal requirements, limit values are exceeded at many monitoring stations with little or no improvement in recent years. In order to assess the effects of future emission control regulations on roadside NO2 concentrations, a downscaling module has been implemented in the GAINS integrated assessment model. The module follows a hybrid approach based on atmospheric dispersion calculations and observations from the AirBase European air quality database that are used to estimate site-specific parameters. Pollutant concentrations at every monitoring site with sufficient data coverage are disaggregated into contributions from regional background, urban increment, and local roadside increment. The future evolution of each contribution is assessed with a model of the appropriate scale: 28×28 km grid based on the EMEP Model for the regional background, 7×7 km urban increment based on the CHIMERE Chemistry Transport Model, and a chemical box model for the roadside increment. Thus, different emission scenarios and control options for long-range transport as well as regional and local emissions can be analysed. Observed concentrations and historical trends are well captured, in particular the differing NO2 and total NOx =NO+NO2 trends. Altogether, more than 1950 air quality monitoring stations in the EU are covered by the model, including more than 400 traffic stations and 70% of the critical stations. Together with its well-established bottom-up emission and dispersion calculation scheme, GAINS is thus able to bridge the scales from European-wide policies to impacts in street canyons. As an application of the model, we assess the evolution of attainment of NO2 limit values under current legislation until 2030. Strong improvements are expected with the introduction of the Euro 6 emission standard for light duty vehicles; however, for some major European cities, further measures may be required, in particular if aiming to achieve compliance at an earlier time. [ABSTRACT FROM AUTHOR]

NO2 concentrations at the street level are a major concern for urban air quality in Europe and have been regulated under the EU Thematic Strategy on Air Pollution. Despite the legal requirements, limit values are exceeded at many monitoring stations with little or no improvement during recent years. In order to assess the effects of future emission control regulations on roadside NO2 concentrations, a downscaling module has been implemented in the GAINS integrated assessment model. The module follows a hybrid approach based on atmospheric dispersion calculations and observations from the AirBase European air quality data base that are used to estimate site-specific parameters. Pollutant concentrations at every monitoring site with sufficient data coverage are disaggregated into contributions from regional background, urban increment, and local roadside increment. The future evolution of each contribution is assessed with a model of the appropriate scale - 28x28 km grid based on the EMEP Model for the regional background, 7x7 km urban increment based on the CHIMERE Chemistry Transport Model, and a chemical box model for the roadside increment. Thus, different emission scenarios and control options for long-range transport, regional and local emissions can be analysed. Observed concentrations and historical trends are well captured, in particular the differing NO2 and total NOx =NO+NO2 trends. Altogether, more than 1950 air quality monitoring stations in the EU are covered by the model, including more than 400 traffic stations and 70% of the critical stations. Together with its well-established bottom-up emission and dispersion calculation scheme, GAINS is thus able to bridge the scales from European-wide policies to impacts in street canyons. As an application of the model, we assess the evolution of attainment of NO2 limit values under current legislation until 2030. Strong improvements are expected with the introduction of the Euro 6 emission standard for light duty vehicles; however, for some major European cities, further measures may be required, in particular if aiming to achieve compliance at an earlier time. [ABSTRACT FROM AUTHOR]

The Hai River Basin (HRB), one of the most populated areas in China, is experiencing high NH 3 emissions, mostly from agricultural sources, and suffering from strongly enhanced PM 2.5 concentrations in all urban areas. Further population growth and urbanization projected until 2030 may exacerbate this situation. Here, the NUFER (NUtrient flows in Food chains, Environment and Resources use) and GAINS (Greenhouse gas – Air pollution Interactions and Synergies) models have been coupled for the first time to understand possible changes of agricultural NH 3 emission between 2012 and 2030 and their impacts on ambient PM 2.5 concentrations, and to explore options to improve this situation. Results show that agricultural ammonia emissions in the HRB were 1179 kt NH 3 in 2012, 45% of which was from the hotspots at or near conurbation areas, including Beijing-Tianjin, Tangshan-Qinhuangdao, Shijiazhuang-Baoding, Dezhou, Handan-Liaocheng, and Xinxiang. Without intervention, agricultural ammonia emissions will further increase by 33% by 2030. The impacts of several scenarios were tested with respect to air pollution. Compared to the business-as-usual scenario, a scenario of improved technology and management combined with human diet optimization could greatly reduce emission (by 60%), and lead to 22–43% and 9–24% decrease of the secondary inorganic aerosols and PM 2.5 concentrations, respectively, in the hotspots of NH 3 emissions. Our results further confirmed that ammonia control is needed for air pollution abatement strategies (SO 2 , NO x and primary PM reduction) to be effective in terms of PM 2.5 . [ABSTRACT FROM AUTHOR]