Search

Building on previous work studying alkanes, we develop a dissipative particle dynamics (DPD) model to capture the behavior of the alkyl aromatic hydrocarbon family under ambient conditions of 298 K and 1 atmosphere. Such materials are of significant worldwide industrial importance in applications such as solvents, chemical intermediates, surfactants, lubricating oils, hydraulic fluids, and greases. We model both liquids and waxy solids for molecules up to 36 carbons in size and demonstrate that we can correctly capture both the freezing transition and liquid-phase densities in pure substances and mixtures. We also demonstrate the importance of including specialized bead types into the DPD model (rather than solely relying on generic bead types) to capture specific local geometrical constructs such as the benzene ring found in the benzyl chemical group; this can be thought of as representing subtle real-world many-body effects via customized pairwise non-bonded potentials.

We present a dissipative particle dynamics (DPD) model for wax formation (i.e., the freezing transition) in linear and branched alkanes at room temperature (298 K) and atmospheric pressure. We parametrize the model using pure liquid phase densities and the onset of wax formation as a function of alkyl chain length. Significant emphasis is placed on building an accurate representation of the underlying molecular architecture by careful consideration of bond lengths and angles, aided by distributions obtained from molecular dynamics simulation. Using the derived model, we observe wax formation in

A new metallocene-based polymerization mechanism is elucidated in which a zirconium hydride center inserts α-methylstyrene at the start of a polymer chain. The hydride is then regenerated by hydrogenation to release a polyolefin containing a single terminal α-methylstyrenyl group. Through the use of the difunctional monomer 1,3-diisopropenylbenzene, this catalytic hydride insertion polymerization is applied to the production of linear polyethylene and ethylene-hexene copolymers containing an isopropenylbenzene end group. Conducting simple radical polymerizations in the presence of this new type of macromonomer leads to diblock copolymers containing a polyolefin attached to an acrylate, methacrylate, vinyl ester, or styrenic segments. The new materials are readily available and exhibit interfacial phenomena, including the mediation of the mixing of immiscible polymer blends.

The structure and frictional properties of glycerol monooleate (GMO) in organic solvents, with and without water impurity, confined and sheared between two mica surfaces are examined using molecular dynamics simulations. The structure of the fluid is characterized in various ways, and the differences between systems with nonaggregated GMO and with preformed GMO reverse micelles are examined. Preformed reverse micelles are metastable under static conditions in all systems. In n-heptane under shear conditions, with or without water, preformed GMO reverse micelles remain intact and adsorb onto one surface or another, becoming surface micelles. In dry toluene, preformed reverse micelles break apart under shear, while in the presence of water, the reverse micelles survive and become surface micelles. In all systems under static and shear conditions, nonaggregated GMO adsorbs onto both surfaces with roughly equal probability. Added water is strongly associated with the GMO, irrespective of shear or the form of the added GMO. In all cases, with increasing shear rate, the GMO molecules flatten on the surface, and the kinetic friction coefficient increases. Under low-shear conditions, the friction is insensitive to the form of the GMO added, whereas the presence of water is found to lead to a small reduction in friction. Under high-shear conditions, the presence of reverse micelles leads to a significant reduction in friction, whereas the presence of water increases the friction in n-heptane and decreases the friction in toluene.

Atomistic molecular dynamics simulations are used to study the self-assembly and friction of glycerol monooleate mixed with with oleic acid, glycerol, calcium oleate, or water in n-heptane and toluene solvents. The aim is to determine how chemical degradation products of glycerol monooleate could lead to changes in structural and frictional properties. In bulk solution, almost all mixtures studied contain self-assembled reverse micelles. Under confinement between shearedmica surfaces, the reverse micelles disintegrate, but the distribution of molecules between the surfaces and the centre of the fluid layer depends sensitively on the chemical composition, with more polar mixtures showing stronger adsorption. The measured kinetic friction coefficient is correlated with the extent of surface adsorption: while degradation products lead to increases inthe friction coefficient in most cases, all changes are more pronounced when there is less surface adsorption.

The formation of glycerol monooleate reverse micelles in n-heptane and toluene at room temperature is studied using molecular-dynamics simulations and small-angle neutron scattering. The glycerol monooleate concentrations under consideration are in the range of 5-20 wt %. Under these conditions, spontaneous reverse-micelle formation is observed on the simulation timescale (up to 30 ns). From simulations, the typical dimensions (semiaxes) of the equivalent ellipsoids with the same masses and moments of inertia are in the range of 15-23 Å, with instantaneous shapes that are slightly nonspherical. By analyzing the scattering form factors from simulation and experiment, the radii of gyration of the reverse micelles are determined to be approximately 15 Å. The number of glycerol monooleate molecules in a reverse micelle is smaller in toluene (∼20) than in n-heptane (∼30), but the overall dimensions are similar due to greater penetration of the toluene in to the reverse micelle. The effects of low concentrations (1 wt %) of water, acetic acid, and ethanol on the reverse-micelle dimensions are determined. The overall structural effects are small, but the distributions of the molecules within the reverse micelles are shown to be sensitive to the molecular polarity.

A polythermal methodology to assess the mechanisms and the kinetics of solution crystallisation is described and used in connection with a recently proposed model for the dependence of the critical undercooling for crystallisation on the cooling rate (D. Kashchiev, A. Borissova, R. B. Hammond, K. J. Roberts, J. Cryst. Growth, 312 (2010) 698–704; J. Phys. Chem. B, 114 (2010) 5441–5446). This first principles model allows determination of crystallisation parameters that could otherwise only be obtained by combined application of both the isothermal and the polythermal methods. The methodology is validated through analysis of experimental data measured for methyl stearate crystallising from kerosene solutions with concentrations from 200 to 350 g l−1. The analysis reveals a progressive heterogeneous nucleation mechanism and crystallite interfacial tension values between 1.64 and 1.79 with no obvious dependence on the solution concentration, in good agreement with values derived by isothermal methods. Sensitivity analysis leads to the conclusion that a minimum of four different cooling rates spanning at least one order of magnitude together with at least five repeats for crystallisation temperature values at each cooling rate are appropriate. Extensive supplementary material provides a mathematical description of the above authors' model, insight into the relationship between this model and the empirical Nyvlt model, and further detail concerning the results of the sensitivity analysis carried out on the experimental methodology used.

The adsorption of surfactants from dilute oil solutions on to solid surfaces is studied as a function of surface curvature and surface coverage. Coarse-grained molecular models, computer simulations, and umbrella sampling are used to compute the dependence of the free energy of adsorption on to a spherical colloid surface with radius R. It is shown that for fixed surface coverage, and with all other things being equal, the free energy of adsorption decreases with decreasing R. For fixed surface curvature, the free energy of adsorption increases with increasing surface coverage. These trends arise from the excluded-volume interactions between the surfactant tails. The dependence on surface curvature is due to the geometrical effect of there being more free volume for the surfactant tails with a smaller colloid radius. The consequences of these effects on equilibrium partitioning are examined. It is shown that for surfactants adsorbed on small-colloid and large-colloid surfaces in mutual equilibrium with a dilute solution, the surface coverage of the small particles is significantly greater. The implications for industrial applications are discussed and could be significant.