Search

ABSTRACT: Acacia mearnsii De Wild. (Black wattle) is a forest species with great social and economical importance for the southern region of Brazil. This species has multifunctional characteristics, being cultivated to produce tannin, cellulose and energy. This research identified black wattle genotypes with competence for adventitious rooting for mini-cutting propagation. Single-bud mini-cuttings were treated with IBA at a concentration of 2000 mg L-1. After 30 days of cultivation in a humid chamber, the mini-cuttings were evaluated for percentages of survival, rooting, number of roots, average length of the three largest roots, and the number of mini-cuttings rooted per mini-stump. The identification of the best genotypes was performed with the Selegen REML/BLUP software. Selection between and within black wattle progenies can be performed based on the number of rooted mini-cuttings, making it possible to select genotypes with high competence for adventitious rooting while maintaining genetic variability for new selection cycles to develop clones for vegetative propagation by mini-cutting.

Feijoa sellowiana O. Berg é uma frutífera nativa de grande potencial de cultivo, porém no Brasil existem poucos pomares em escala comercial. Uma das dificuldades à expansão da produção está vinculada a obtenção de mudas clonais pela escassez de protocolos eficientes para a propagação vegetativa. Assim, o presente estudo teve como objetivo avaliar a eficiência do antioxidante polivinilpirrolidona (PVP) na estaquia de F. sellowiana. Para isso foram testadas diferentes concentrações de PVP (0, 2000 e 4000mg L-1) aplicados de forma sistêmica, em imersão e associado à solução de ácido indolbutírico (AIB). A aplicação de 4000mg L-1 de PVP na forma sistêmica resultou nas maiores porcentagens de sobrevivência e brotação (47,1 e 25,0%, respectivamente), bem como foi maximizou a formação de calos (50,0%) aos 90 dias e de raízes (47,5%) aos 120 dias de cultivo. O uso de antioxidante polivinilpirrolidona favorece a propagação vegetativa de F. sellowiana por estaquia, podendo apresentar-se como relevante ferramenta na propagação clonal da espécie.

ABSTRACT: Plants use light as a source of energy in the process of photosynthesis. Different levels of luminosity cause physiological and morphological changes in the plant, and its success depends on its adaptation to these different levels. Light emitting diodes (LED) have been proposed as a light source in controlled environments. The present research evaluated physiological and morphological aspects in Eucalyptus benthamii (Myrtaceae) seedlings kept under different colors of LED lamps and submitted to water stress. The experiment was carried out in a completely randomized design, in which the treatments were defined as: T1 (control, with white light); T2 (blue light); T3 (red light) and T4 (mixed blue and red light). Red light resulted in the best response to most morphological variables in plant growth. In response to water stress, blue light LEDs resulted in a better seedling response, with slower reduction of photosynthetic rate and other variables. This may indicate the possibility of reducing water deficit damage in seedlings acclimated to blue light prior to field planting.

Abstract The objective of this work was to evaluate the effects of indolebutyric acid (IBA) concentration, substrate composition and volume, and propagule type on the adventitious rooting and quality of Cordia trichotoma plantlets produced by mini-cuttings. Mini-cuttings were evaluated for rooting percentage and root number and length at 30 and 60 days of cultivation. Plantlets were evaluated for shoot height and stem diameter at 30, 60, 90, and 120 days of cultivation. The Dickson quality index, number of leaves, and fresh and dry weights of shoots and roots were also determined at 120 days of cultivation. The experiments were carried out in a completely randomized design, with six replicates, in a greenhouse, evaluating different concentrations of IBA, substrate composition and volume, and propagule type for adventitious rooting. Plantlets of C. trichotoma can be produced with quality and proper rooting from mini-cuttings with one or two buds or multiple buds (apical) when treated with 3,000 mg L-1 IBA and planted in 110 cm3 tubes containing equal proportions of substrate and vermiculite.

ABSTRACT In this study, we evaluated the adventitious rooting competence of mini-cuttings and plantlet growth of two clones of swamp cork (Erythrina crista-galli L.). Experiments were carried out in a factorial of two clones to study the need of application of indolebutyric acid (IBA), substrate composition for mini-cutting rooting and plantlet growth, and rooting curves of the clones 15SM05 and 15SM08, in the completely randomized design. Mini-cuttings of swamp cork clones showed high rooting competence, with mean rooting percentage above 80% even without IBA application. Vermiculite and its combination with commercial substrate resulted in the highest percentage of rooting, and number and length of roots and shoots. The clones showed differences regarding their adventitious rooting competence and the increment in rooted mini-cuttings with time in a humidity chamber, being the clone 15SM05 the most suitable for plantlet production.

The objective of this study was to investigate the production of jacaranda (Jacaranda mimosifolia D. Don) plantlets by minicutting. For this, a mini-clonal hedge was established to supply sprouts for minicuttings. For adventitious rooting, the minicuttings were treated with hydroalcoholic solution of indolebutyric acid at concentrations of 0, 1000, and 2000 mg L-1 and grown in a greenhouse. The survival of minicuttings was evaluated at 30, 60, and 90 days, and rooting, callus, sprouting, leaf area, root area, aerial dry mass, root dry mass, total dry mass, and aerial/root dry mass ratio were assessed at 90 days. The rooted minicuttings were treated with different volumes of nutrient solution (0, 25, and 50 mL) and were evaluated for survival, height, diameter, leaf area, root area, aerial dry mass, root dry mass, and aerial/root dry mass ratio of the plantlets after 30 days of cultivation in a shade house and full sunlight. Jacaranda can be established in a mini-clonal hedge for the production of shoots necessary for the preparation of minicuttings. The minicuttings are rooted in a greenhouse without use of indolebutyric acid. The plantlets produced can be acclimatized in a shade house and rustified in full sun. Jacaranda plantlets can be produced by minicuttings.

Abstract Leaves of mate is one of the main non-timber forest products marketed in South America, which makes establishment of new plantations of great interest. However, vegetative propagation of mate plantlets presents difficulties, which may be associated with the complexity of adventitious root formation. The aims of this study were to anatomically characterize the adventitious roots of mate-clone mini-cuttings and investigate the relationship of phenols and starch with adventitious rooting competence in mini-cuttings treated or not with indole-butyric acid (IBA). The mini-cuttings of four clones were collected at 0, 30, and 60 days of cultivation, fixed in a solution containing 1% glutaraldehyde and 4% formaldehyde, pre-infiltrated and infiltrated in (2-hydroxyethyl) methacrylate, and sectioned in a microtome. Ferric chloride and toluidine blue were used to detect phenolic compounds and lugol to identify starch. Adventitious roots formed in mini-cuttings treated with IBA presented disorganized xylem and phloem and poles irregularly but exhibited sclerenchyma vessel elements and tracheid cells indicating functionality. Differences in the rhizogenic ability of mate clones mini-cuttings were not due to the presence of anatomical barriers or the accumulation of phenolic compounds but be associated with the presence and distribution of starch grains in vegetative propagules.

Abstract: The objective of this work was to define an early selection strategy to identify Cabralea canjerana (Meliaceae) clones with high multiplication rate. A mini-garden of 109 clones of canjerana seedlings was established in a completely randomized design, in an acclimatized greenhouse. From seedlings, the mini-stumps and mini-cuttings were obtained. Mini-cuttings were collected at five different times, and the number of mini-cuttings per mini-stump, rooting percentage, and number of rooted mini-cuttings were quantified. The number of rooted mini-cuttings per mini-stump was the only trait that showed high correlation with the others. Five groups of clones based on the number of rooted mini-cuttings per mini-stump were separated using k-means clustering, and the genetic gain from selection and Pearson correlation were estimated. The selection of the two best groups in each evaluation period resulted in high genetic gains from selection for all evaluated traits. Early selection for the number of rooted mini-cuttings discarded 65% of the evaluated clones, which increases experimental precision in evaluations of traits associated with plantlet growth and quality. Early selection for the number of rooted mini-cuttings per mini-stump at different times allows the identification of Cabralea canjerana clones with high multiplication rate.

The aim of this work was to evaluate the in vitro productivity of grapia (Apuleia leiocarpa) micro-stumps cultivated in different media conditions to maximize its multiplication rate. Micro-stumps from aseptic seedlings were cultivated in WPM medium added with 0, 2.2, 4.4, 6.6 and 8.8 µM of 6-benzylaminopurine (BAP) and subcultured in WPM medium without cytokinin. Micro-stumps were also cultivated in WPM, MS or ½ MS base media with or without the addition of 1.5 g L-1 of activated charcoal and submitted to drastic pruning at 30, 60 and 90 days of cultivation. The in vitro cultivation of grapia micro-stumps in WPM or ½ MS media added with 8.8 µM of BAP and the subcultivation in media without cytokinin increase the number and length of shoots. The cultivation of grapia micro-stumps in media with activated charcoal increases the productivity of micro-cuttings per micro-stumps, but in the absence of activated charcoal induces callus formation and indirect organogenesis of shoots. The in vitro conservation of grapia microstumps maximizes the multiplication rate, being a feasible technique for the production of grapia plantlets.

The objective of this study was to evaluate the morphophysiological quality of yerba mate plantlets (Ilex paraguariensis A. St.-Hil.) produced by mini-cutting at four different times of year and cultivated in different containers. For the rooting of mini-cuttings, shoots of four yerba mate clones were collected four times during the year (April, July and October 2014 and January, 2015), cut into single-budded mini-cuttings and planted in equal proportions of pine bark-based commercial substrate, vermiculite and coarse sand. After 60 days of cultivation in a wet chamber, the rooted mini-cuttings were transferred to different containers: a 100 cm³ rigid polyethylene tube container and 500, 1500 and 3000 cm3 polyethylene bags containing pine bark-based commercial substrate and underground soil (2:1 v/v). A completely randomized design was used in a 4 x 4 factorial scheme, with five replications ranging from 5 to 20 mini-cuttings per experimental unit. The plantlets were evaluated for survival percentage, shoot height, stem diameter, shoot height/stem diameter ratio and number of leaves at 30, 60, 90 and 120 days of cultivation. At 120 days of cultivation, 10 plantlets from each treatment were randomly picked to evaluate shoot and root dry mass, Dickson quality index, shoot height, surface area, total volume and number of root tips. The best combinations of shoot height, length, surface area, total volume and number of root tips and Dickson quality index were found in plantlets produced in July, 2014, followed by plantlets produced in October,2014 and January, 2015. The polyethylene bags allowed the production of yerba mate plantlets with satisfactory quality of shoot and roots, regardless of the volume. Yerba mate plantlets can be produced by mini-cutting from July to January in polyethylene bags.

Abstract: The objective of this work was to evaluate different solvents and times in the ultrasound-assisted extraction of polyphenols, in order to quantify the total phenolic and flavonoid contents in and the antioxidant activity of mate (Ilex paraguariensis) leaves. The experiment was carried out in a completely randomized design, in a 8x3 (solvent x time of extraction) factorial arrangement. The solvent extractors were distilled water and aqueous solutions of ethanol, acetone, and methanol, acidified or not with hydrochloric acid, and the time of ultrasound-assisted extractions were 15, 30, and 45 min. All extractions were finished with a mechanical agitation of 30 min. Samples treated with acidified hydroalcoholic solvents resulted in higher values of total phenolics and flavonoids and antioxidant activity. The extraction using acidified hydroethanol solvent was not affected by the time in the ultrasound. The contents of total phenolics and flavonoids were highly correlated with each other and with the antioxidant activity, especially when it was determined by the ferric-reducing antioxidant power method. Acidified hydroethanol solvent in ultrasound for 15 min is the most suitable extraction condition for the quantification of the contents of total phenolics and flavonoids in and the antioxidant activity of mate leaves.

ABSTRACT: This study aimed to evaluate the rooting capability of apical and nodal mini-cuttings of ipe-roxo ( Handroanthus heptaphyllus ) in different substrates. Shoots produced from mini-stumps were fractioned into mini-cuttings 2-cm long apical or nodal mini-cuttings and treated with 1000 mg L-1 of indolebutyric acid (IBA). Four substrate combinations were evaluated: commercial substrate composed of pine bark and vermiculite in proportions of 1:1, 2:1 and 1:2 (v /v) and commercial substrate, vermiculite and sand in the proportion of 1:1:1 (v/v). The factorial experiment utilized a completely random design, with five replicates of four mini-cuttings. Rooting, shooting and survival percentage, number and length of shoots and roots were evaluated at 60 and 90 days of growth. Commercial substrate and vermiculite are a good combination for rooting mini-cuttings of ipe-roxo. Apical and nodal mini-cuttings exhibit similar rooting behavior and both are feasible for production of ipe- roxo plantlets.

ABSTRACT The competence of adult plants of mate (Ilex paraguariensis St. Hil.) to undergo adventitious rooting is essential to their vegetative rescue by cuttings. This study aimed to evaluate the adventitious rooting competence of adult mate plants, and then rescue these plants by making cuttings from epicormic shoots induced in different trunk positions. The percent survival and rooting of cuttings from epicormic shoots induced by girdling in seven adult plants were evaluated. The two stock plants whose cuttings had the highest rooting competence were further pruned and girdled to evaluate the effect of the position of epicormic shoots on their adventitious rooting competence. The potential success of rescuing of the same adult plants was also studied with cuttings of epicormic shoots induced by coppicing. The shoots were sectioned in single-bud cuttings, either treated with 3,000 mg L-1 indolebutyric acid or untreated, and then cultivated in a humid chamber for 60 days, and then the percent survival and rooting of cuttings was evaluated. In conclusion, we found that it is possible to rescue adult mate plants by cuttings from epicormic shoots induced by pruning, girdling, or coppicing. The adventitious rooting competence of cuttings differs among adult mate plants, and depends on the position of the epicormic shoots on the trunk from which epicormic shoots are collected.

The objective of this study was to evaluate the morphophysiological quality of yerba mate plantlets (Ilex paraguariensis A. St.-Hil.) produced by mini-cutting at four different times of year and cultivated in different containers. For the rooting of mini-cuttings, shoots of four yerba mate clones were collected four times during the year (April, July and October 2014 and January, 2015), cut into single-budded mini-cuttings and planted in equal proportions of pine bark-based commercial substrate, vermiculite and coarse sand. After 60 days of cultivation in a wet chamber, the rooted mini-cuttings were transferred to different containers: a 100 cm³ rigid polyethylene tube container and 500, 1500 and 3000 cm3 polyethylene bags containing pine bark-based commercial substrate and underground soil (2:1 v/v). A completely randomized design was used in a 4 x 4 factorial scheme, with five replications ranging from 5 to 20 mini-cuttings per experimental unit. The plantlets were evaluated for survival percentage, shoot height, stem diameter, shoot height/stem diameter ratio and number of leaves at 30, 60, 90 and 120 days of cultivation. At 120 days of cultivation, 10 plantlets from each treatment were randomly picked to evaluate shoot and root dry mass, Dickson quality index, shoot height, surface area, total volume and number of root tips. The best combinations of shoot height, length, surface area, total volume and number of root tips and Dickson quality index were found in plantlets produced in July, 2014, followed by plantlets produced in October,2014 and January, 2015. The polyethylene bags allowed the production of yerba mate plantlets with satisfactory quality of shoot and roots, regardless of the volume. Yerba mate plantlets can be produced by mini-cutting from July to January in polyethylene bags.

O objetivo deste trabalho foi avaliar o estabelecimento e crescimento in vitro de plantas de grápia (Apuleia leiocarpa (Vogel) J. F. Macbr.) em diferentes condições de cultivo. Sementes de grápia tratadas com ácido sulfúrico (H2SO4) por 20min foram imersas em etanol a 70% por 30s e em hipoclorito de sódio (0; 2,5 ou 5,0% de cloro ativo) por 5, 10 ou 15min. Aos 30 dias de cultivo, as sementes foram avaliadas quanto às porcentagens de desinfestação e germinação. As plantas assépticas foram transferidas para os meios de cultura WPM, MS e ½MS e avaliadas quanto ao comprimento (cm) da parte aérea e total das raízes e ao número de segmentos nodais e folhas aos 15 dias. Sementes de grápia também foram semeadas em meio de cultura WPM, suplementado com 4, 5 ou 6g L-1 de agar combinado com 10, 20 ou 30g L-1 de sacarose, e mantidos sob duas condições de luminosidade: luz durante todo o período de estabelecimento e escuro durante sete dias após a semeadura. Foram avaliados a porcentagem de germinação das sementes, o comprimento (cm) da parte aérea e total das raízes e o número de segmentos nodais e folhas aos 15 dias. Concluiu-se que os tratamentos com ácido sulfúrico e etanol foram suficientes para o estabelecimento in vitro de plantas assépticas de grápia. Plantas assépticas podem ser cultivadas em meio de cultura WPM ou MS, suplementados com 10g L-1 de sacarose e 4g L-1 de agar.

ABSTRACT: The aim of this research was to evaluate the feasibility of rescuing adult plants by cuttings from post-fire epicormic shoots. We evaluated the native tree species erva mate ( Ilex paraguariensis St. Hil.) and canjerana ( Cabralea canjerana Vell. Mart.), which present difficult seedling production and are economically and ecologically important. The plant material used for the preparation of cuttings consisted of shoots from bud differentiation of tissue from the stem collar of the trees. One-bud cuttings of erva mate were treated with 4000 or 8000mg L-1 of indolebutiric acid (IBA) and the checks were not treated with auxins. The cuttings were grown in three different substrates: carbonized rice husks, vermiculite and coarse sand. The experiment was a factorial with a completely random design and five replicates of five cuttings. One-bud cuttings from the basal, intermediate and apical parts of canjerna shoots were treated with 0 or 6000mg L-1 of IBA and planted in commercial substrate and coarse sand (3:2 v/v). The experiment was a factorial with a completely random design and ten replicates of three cuttings. Cuttings from post-fire epicormic shoots can be used for rescuing erva mate and canjerana adult plants. Erva mate cuttings treated with 8000mgL-1 IBA have increased rooting when grown in coarse sand. Canjerana cuttings from the basal part of epicormic shoots have greater survival and rooting than those from intermediate and apical parts.