Search

Abstract Background Cognitive function plays a crucial role in human life, and its maintenance and improvement are essential in both young and older adults. Since cognitive decline can be associated with oral function decline, preventing the decline in both cognitive and oral functions is an urgent social issue. Several training methods to improve each function have been proposed. Previous studies have indicated that greater brain activity during training is associated with increased benefits for cognitive function. Although adding cognitive function elements to oral function training may promote the activation of brain activity during oral function training, the effects have not been validated. The main purpose of this study is to develop a novel training program that combines oral function training with cognitive training, which is expected to activate key brain regions involved in oral and cognitive functions, such as the left dorsolateral prefrontal cortex (DLPFC) and right medial prefrontal cortex (mPFC). Methods Four types of training programs combining oral and cognitive training: PaTaKaRa × calculation, lip exercise × N-back, tongue exercise × inhibition, and tongue exercise × memory, were developed. Each program had seven levels of difficulty [level 0 (no cognitive load) and level 6 (maximum difficulty)]. Twelve healthy young adults participated in the study and were instructed to perform all four programs. Brain activity in the left DLPFC and right mPFC were measured during each training session using two-channel near-infrared spectroscopy (NIRS). Results No significant brain activity was observed during training at level 0. Brain activity in the left DLPFC was significantly increased at levels 1 and 2 and in the left DLPFC and right mPFC at level 6 during PaTaKaRa × calculation training. Brain activity in the left DLPFC was significantly increased at level 6 during tongue exercise × inhibition training. Brain activity in the left DLPFC and right mPFC was significantly increased at level 6 during lip exercise × N-back training. Conclusion Oral function training did not significantly increase brain activity; nevertheless, oral function with cognitive training stimulated brain activity in the prefrontal cortex. Trial registration : UMIN-CTR. ID: UMIN000039678. date: 06/03/2020.

Unreasonable medical fees can cause problems such as increased medical costs, greater medical disparities, decreased medical standards, and physician shortages. To prevent such problems, it is important to set appropriate medical fees, ensure their proper use, and improve the efficiency of medical care. The treatment of patients with maxillofacial defects is generally more expensive compared with general prosthodontic treatment because it involves more materials and requires more frequently follow-ups for longer period. However, the actual time required for maxillofacial prosthetic treatment is unclear. Therefore, in this study, we aimed to clarify the amount of time spent treating maxillofacial prosthetic patients. We analyzed clinical data from patients undergoing routine maxillofacial prosthetic treatment, irrespective of difficulty level, at 8 university hospitals and 2 dental clinics. We also collected data from maxillofacial prosthodontists on the treatment time required for various Japanese health insurance items, including the fabrication of maxillofacial prostheses. The results revealed that some aspects of maxillofacial prosthetic treatment may take longer to perform and are more costly to perform than previously thought, suggesting the need for some adjustments to the health insurance reimbursement system. Maintaining an appropriate balance between expenditures and fees will greatly benefit patients and physicians, ensuring positive health outcomes and a healthy society.

Abstract The optimal configuration of a customized implant abutment is crucial for bone remodeling and is influenced by various design parameters. This study introduces an optimization process for designing two-piece zirconia dental implant abutments. The aim is to enhance bone remodeling, increase bone density in the peri-implant region, and reduce the risk of late implant failure. A 12-month bone remodeling algorithm subroutine in finite element analysis to optimize three parameters: implant placement depth, abutment taper degree, and gingival height of the titanium base abutment. The response surface analysis shows that implant placement depth and gingival height significantly impact bone density and uniformity. The taper degree has a smaller effect on bone remodeling. The optimization identified optimal values of 1.5 mm for depth, 35° for taper, and 0.5 mm for gingival height. The optimum model significantly increased cortical bone density from 1.2 to 1.937 g/cm3 in 2 months, while the original model reached 1.91 g/cm3 in 11 months. The standard deviation of density showed more uniform bone apposition, with the optimum model showing values 2 to 6 times lower than the original over 12 months. The cancellous bone showed a similar trend. In conclusion, the depth and taper have a significant effect on bone remodeling. This optimized model significantly improves bone density uniformity.

Introduction: During tissue repair or regeneration, several bioactive molecules are released and interact with each other and act as complex additives or inhibitors for tissue reconstruction. In this study, the bone-healing effects of the combination treatment with tumor necrosis factor-α (TNF-α) inhibition, vascular endothelial growth factor A (VEGF-A) and bone morphogenetic protein-7 (BMP-7) release by gene silencing, and gene transfection with calcium phosphate nanoparticles (CaP) in the rat femoral head was histologically, morphologically, and biochemically evaluated. Methods: A triple-functionalized paste of CaP carrying plasmid DNA encoding for BMP-7 and for VEGF), and siRNA against TNF-α was developed and denoted as CaP3mix. To compare the effects of 3mixCaP, CaP with plasmid DNA encoding BMP-7, VEGF, or siRNA encoding TNF-α was prepared and denoted as CaP/PEI/pBMP-7/SiO2, CaP/PEI/pVEGF/SiO2, or CaP/PEI/siRNA-TNF-α/SiO2, respectively. The bone healing in bone defects in the rat femoral head was investigated after 10 and 21 days of implantation. Results: The levels of bone formation-related markers OCN, Runx2, and SP7 increased at the protein and gene levels in 3mixCaP after 10 days, and 3mixCaP significantly accelerated bone healing compared with the other treatments after 21 days of implantation. Conclusion: The triple-functionalized CaP paste loading plasmid DNA encoding BMP-7 and VEGF and siRNA encoding TNF-α is a promising bioactive material for bone tissue repair.

Abstract Background This study aimed to evaluate the efficacy and safety of dentin hypersensitivity (DH) treatment using a newly developed device based on a powder jet deposition (PJD) technique that creates a hydroxyapatite (HAP) layer on the dentin surface, thereby alleviating the hypersensitivity. The effect of the PJD treatment was compared with that of conventional treatment using Teethmate Desensitizer (TMD; calcium-phosphate containing material with TTCP (Ca4(PO4)2O) and DCPA (CaHPO4)), which has been used clinically in Japan with well-confirmed effectiveness. Materials and methods A randomized controlled trial was conducted including 35 patients who had symptoms of DH in two or more quadrants. Two test teeth were selected per patient (70 teeth in total) and randomly assigned to PJD or TMD treatment. The efficacy was evaluated using the improvement rate for air and scratch pain according to the scores obtained via visual analog scale 12 weeks after treatment. The safety assessment was performed focusing on gingival index (GI) and spontaneous pain. The t-test was used to analyze the non-inferiority of PJD treatment compared to TMD treatment. Results The improvement rate of air pain was 69.0% for PJD and 69.7% for TMD. The improvement rate of scratch pain was 80.8% for PJD and 81.7% for TMD. Non-inferiority with a margin of 10% was not observed for both air and scratch pain. No change was observed in GI from baseline and the improvement rate of spontaneous pain for PJD was higher than that for TMD. Conclusion Non-inferiority of PJD to TMD treatment was not observed in this study; however, it was not statistically demonstrated, and the results were thus interpreted as inconclusive. PJD did improve the DH symptoms, as did TMD. PJD’s therapeutic effect was most likely attributable to the deposition of a HAP layer on the tooth surface, which would alleviate hypersensitivity for at least 12 weeks without causing severe adverse events. Trial registration UMIN-CTR. ID: UMIN000025022. date: 02/12/2016.

Abstract Background Appropriate load distribution among the supporting elements is essential for the long-term success of implant-assisted removable partial dentures; however, there is little information available on load distribution. Purpose This study aimed to evaluate the effect of implant location on load distribution in implant-assisted removable partial dentures by reviewing in vitro models and finite-element analysis studies. Materials and methods English-language studies which examined the load distribution of implant-assisted removable partial dentures and were published between January 2001 and October 2022 were extracted from PubMed, ScienceDirect, and Scopus online databases, and manual searching. Two reviewers selected the articles based on the predetermined inclusion and exclusion criteria, followed by data extraction and analysis. Results Forty-seven studies were selected after evaluating the titles and abstracts of 264 articles; two were identified manually. After screening the text, 12 studies were included: six in vitro model experiments and six finite-element analysis studies. All included studies used a mandibular free-end missing model (Kennedy Class I or II). The influence of implant location on load distribution to the abutment tooth, implant, and mucosa under the denture base was summarized in three cases: implant at the premolar, first molar, and second molar region. Due to differences in the measurement method of load distribution and loading condition to the denture, the results differed among the studies. Conclusions The implant location in implant-assisted removable partial dentures can affect load distribution to the supporting elements, such as the abutment tooth, implant, and mucosa under the denture base.

ABSTRACTThe objective of this study was to determine whether degradation products from spongy gelatin scaffolds can enhance angiogenesis and orthotopic bone regeneration. Spongy gelatin disks were prepared using gelatin solution concentrations ranging from 1% to 7% (v/w) within cylindrical tubes through programmed freezing, lyophilization, cutting, and dehydrothermal crosslinking and implanted in critical-sized defects of rat calvaria for up to 8 weeks. Analyses of disk implantation into rat calvaria defects by microfocus X-ray computed tomography and histomorphometry indicated that the bone volume was significantly larger in the 5% and 7% gelatin sponge groups than in the 1% and 3% gelatin sponge groups and tended to increase progressively from 5% to 7%. The histomorphometric analysis also showed that the largest number of new vessels was formed in the defect treated with 5% gelatin sponge compared to other gelatin sponges. Immunohistochemistry of matrix metalloproteinase (MMP) indicated that the gelatin concentration in the disks affected the appearance of MMP-2 and MMP-9 positive cells around the skeleton of the gelatin sponges. The degradation products of gelatin by MMP-9 and prolyl endopeptidase enhanced the formation of a capillary-like structure in human umbilical vein endothelial cells in vitro. These results suggested that the higher-density gelatin sponges tended to supply their own molecules via biodegradation, resulting in enhanced orthotopic osteogenesis through the expected function of gelatin molecules in angiogenesis and bone formation.

Background/purpose: The SimEx is dental training system that applies new technology in a computerized dental simulator. The purpose of this study was to understand the usability satisfaction of the SimEx dental education and evaluation system by dental students and dentists at Tohoku University. Materials and methods: In this study, the Tohoku University IRB execution number was 2020-3-33. The number of subjects accepted was 59 at Tohoku University and divided into 4 groups based on years of clinical experience (Group A: 0 years; Group B: 1–2 years; Group C: 2–5 years; Group D: at least 5 years), and a total of 58 usability questionnaires were collected. Subjects completed the SimEx Usability Satisfaction Questionnaire after operating the SimEx (EPED Inc., Kaohsiung, Taiwan) course, which contained 16 questions. Results: Among the 58 questionnaires collected by Tohoku University, there were 19 undergraduate students (4th∼6th grade), 12 post-graduate students, 14 residents, and 13 dentists. Significant differences between Group A and Group B, and between Group A and Group D were found (P

Introduction: Periodontal ligament is regenerated in association with hard tissue regeneration. Tenomodulin (Tnmd) expression has been confirmed in periodontal ligament and it reportedly inhibits angiogenesis or is involved in collagen fibril maturation. The introduction of Tnmd by gene transfection in bone tissue regeneration therapy might inhibit topical hard tissue formation and induce the formation of dense fibrous tissue. Therefore, the effect of Tnmd introduction by gene transfection technique in vitro and in vivo was investigated in this study. Methods: Osteogenesis- and chondrogenesis-related gene expression levels in osteoblastic cells (MC3T3E1) and rat bone marrow derived cells were detected using qPCR three days after gene transfection with plasmid DNA (Tnmd) using non-viral gene transfection vectors: a calcium phosphate-based gene transfection vector (CaP(Tnmd)) or a cationic polymer-based reagent (JetPEI (Tnmd)). Next, an atelocollagen scaffold with or without CaP (Tnmd) or JetPEI (Tnmd) was implanted into a rat calvaria bone defect, and the remaining bone defect volume and the tissue reaction at 28 days after surgery were evaluated. Results: Runx 2 and SP7 mRNA was reduced by JetPEI (Tnmd) in both cells, but not in CaP(Tnmd). The volume of expressed Tnmd was at 9 ng/mL in both gene transfection vector. The remaining bone defect volume of JetPEI (Tnmd) was significantly bigger than that of the other groups and CaP (EGFP), and that of CaP (Tnmd) was significantly bigger than that of CaP (EGFP). Conclusions: Tnmd introduction treatment inhibits bone formation in artificial bone defect, however, the effect of that was dependent on non-viral gene transfection vector.

Abstract Background For biomechanical consideration of dental implants, an understanding of the three-dimensional (3D) load exerted on the implant is essential, but little information is available on the in vivo load, including the measuring devices. Purpose This review aimed to evaluate studies that used specific load-measuring devices that could be mounted on an implant to measure the functional load in vivo. Materials and methods An electronic search utilizing the internet research databases PubMed, Google Scholar, and Scopus was performed. The articles were chosen by two authors based on the inclusion and exclusion criteria. Results In all, 132 studies were selected from the database search, and 16 were selected from a manual search. Twenty-three studies were finally included in this review after a complete full-text evaluation. Eleven studies were related to the force measurements using the strain gauges, and 12 were related to the piezoelectric force transducer. The principles of the two types of devices were completely different, but the devices produced comparable outcomes. The dynamics of the load magnitude and direction on the implant during function were clarified, although the number of participants in each study was small. Conclusions The load exerted on the implant during function was precisely measured in vivo using specific measuring devices, such as strain gauges or piezoelectric force transducers. The in vivo load data enable us to determine the actual biomechanical status in more detail, which might be useful for optimization of the implant prosthetic design and development of related materials. Due to the limited data and difficulty of in vivo measurements, the development of a new, simpler force measurement device and method might be necessary.

Abstract Background Pharmacists must understand the mechanisms by which dispensing errors occur and take appropriate preventive measures. In this study, the gaze movements of pharmacists were analyzed using an eye-tracking method, to elucidate the thinking process of pharmacists when identifying target drugs and avoiding dispensing errors. Methods We prepared verification slides and projected them on a large screen. Each slide comprised a drug rack area and a prescription area; the former consisted of a grid-like layout with 55 drugs and the latter displayed dispensing information (drug name, drug usage, location number, and total amount). Twelve pharmacists participated in the study, and three single-type drugs and six double-type drugs were used as target drugs. We analyzed the pharmacists’ method of identifying the target drugs, the mechanisms by which errors occurred, and the usefulness of drug photographs using the error-induction (−) /photo (+), error-induction (+) / (+), and error-induction (+) /photo (−) models. Results Visual invasion by non-target drugs was found to have an effect on the subsequent occurrence of dispensing errors. In addition, when using error-induction models, the rate of dispensing error was 2.8 and 11.1% for the photo (+) and photo (−) models, respectively. Furthermore, based on the analysis of eight pharmacists who dispensed drugs without errors, it was clear that additional confirmation of “drug name” was required to accurately identify the target drug in the photo (+) model; additionally, that of “location number” was required to pinpoint directly the position of target drug in the photo (−) model. Conclusions By analyzing the gaze movements of pharmacists using the eye-tracking method, we clarified pharmacists’ thinking process which was required to avoid dispensing errors in a complicated environment and proved the usefulness of drug photographs in terms of both reducing the complexity of the dispensing process and the risk of dispensing errors. Effective measures to prevent dispensing errors include ensuring non-adjacent placement of double-type drugs and utilization of their image information.

BackgroundOrofacial pain conditions are complex disorders that involve biological, social, and psychological factors. Temporomandibular Disorders (TMDs) are one of the most common orofacial pain conditions, and our previous literature review indicated that exercise therapy has shown promise in reducing TMD-related pain. However, more evidence is needed to firmly establish its effectiveness.ObjectivesThis systematic review aims to investigate the effectiveness of exercise therapy on pain relief and jaw mobility in patients with pain-related TMDs.MethodsTo include randomized controlled trials (RCTs) written in English, a literature search was performed using PubMed, Scopus, Web of Science, Cochrane Library, Ovid, EBM reviews, and Academic Search Complete initially from 4th November 2020 until March 2022. A PICOS for this review was as follows; P: Patients with TMD myalgia or arthralgia, I: Excursion exercise, Stretch exercises, Resistance exercise, or Coordination exercise, C: No treatment or education only. O: Pain intensity and Range of Motion (ROM), S: RCTs. After title screening, a full-text assessment was done to extract data. According to Risk of Bias (RoB) 2.0, risk of bias was assessed in each included paper by 2 reviewers independently.ResultsA total of 3,388 titles were identified from the electronic database search. After the screening and full-text evaluation, only 5 studies (145 participants) were eligible to be included. Among the exercise modalities, coordination exercise showed a significant effect on pain relief and improvement of joint mobility.DiscussionDue to the heterogeneity and small sample size of the included studies, a meta-analysis was not feasible. However, this systematic review suggested that exercise therapy, especially coordinate exercise, can be effective in managing painful TMD conditions. Further research is needed to establish optimal parameters for this patient population, as well as standardization and consistency in terminology and treatment structure.

Abstract Background Removal of oral biofilm from the oral mucosa is essential for preventing risk of respiratory and gastrointestinal infection in elderly people. Currently, no device is available which can remove oral biofilm from oral mucosa effectively and safely. Therefore, the effectiveness and safety of the Micro Scale Mist UNIT (MSM-UNIT), a newly developed dental plaque removal device utilizing high speed sprays of fine water droplets, were evaluated for biofilm removal, including the rate and surface roughness for simulated tooth surface and mucous membrane. Methods Simulated tooth and oral mucosa coated with an artificial biofilm of Streptococcus mutans were used for evaluation of effectiveness, with uncoated substrates as the controls. The MSM-UNIT and a conventional air ablation device were operated under recommended instructions. The effectiveness was evaluated from the rate of removal of the biofilm, and the safety was evaluated from the damage observed by scanning electron microscope and surface roughness. Results The biofilm removal rate of the MSM-UNIT was significantly higher than that of AIRFLOW. Little damage was observed in the area treated by the MSM-UNIT. The surface roughness of the MSM-UNIT treated area on simulated tooth surface and oral mucosa showed no significant difference to the control area. In contrast, cracks and powder were observed in the area treated by AIRFLOW. In particular, the surface roughness of the AIRFLOW treated area for Toughsilon was significantly larger than that of the control. Conclusions The MSM-UNIT could be used safely and effectively for removing biofilm not only on simulated tooth surfaces but also simulated mucous membrane. The MSM-UNIT has no harmful effect on teeth or oral mucosa, and may be used for comprehensive oral care for patients during nursing care and the perioperative period.

Abstract Background The palatal augmentation prosthesis (PAP) is an intraoral prosthesis used in the treatment of dysphagia. Aim The objective of the study is to examine the effect of PAP using tongue pressure and the Videofluoroscopic Dysphagia Scale (VDS) to understand the precise mechanism for improvement in swallowing function with PAP for oral cancer at retrospective survey. Methods and results Fifteen patients were provided PAPs. Tongue pressure and VDS were evaluated with and without PAP. After intervention with PAP, tongue pressure significantly increased as compared to when without PAP (p

Abstract The Fukushima-Daiichi Nuclear Power Plant (FNPP) accident in March of 2011 released substantial amounts of radionuclides into the environment. We collected 4,957 deciduous teeth formed in children before the Fukushima accident to obtain precise control data for teeth formed after the accident. Radioactivity was measured using imaging plates (IP) and epidemiologically assessed using multivariate regression analysis. Additionally, we measured 90Sr, 137Cs, and natural radionuclides which might be present in teeth. Epidemiological studies of IP showed that the amount of radioactivity in teeth from Fukushima prefecture was similar to that from reference prefectures. We found that artificial radionuclides of 90Sr and 137Cs, which were believed to have originated from past nuclear disasters, and natural radionuclides including 40 K and daughter nuclides in the 238U and 232Th series contributed to the generation of radioactivity in teeth. We also found no evidence to suggest that radionuclides originating from the FNPP accident significantly contaminated pre-existing teeth. This is the first large-scale investigation of radioactivity and radionuclides in teeth. The present findings will be indispensable for future studies of teeth formed after the FNPP accident, which will fall out over the next several years and might be more contaminated with radionuclides.

Abstract Background The impact of the jaw bone condition, such as bone quantity and quality in the implant placement site, affecting the accuracy of implant placement with computer-guided surgery (CGS) remains unclear. Therefore, this study aimed to evaluate the influence of bone condition, i.e., bone density, bone width, and cortical bone thickness at the crestal bone on the accuracy of implant placement with CGS. Methods A total of 47 tissue-level implants from 25 patients placed in the posterior mandibular area were studied. Implant placement position was planned on the simulation software, Simplant® Pro 16, by superimposing preoperative computed tomography images with stereolithography data of diagnostic wax-up on the dental cast. Implant placement surgery was performed using the surgical guide plate to reflect the planned implant position. The post-surgical dental cast was scanned to determine the position of the placed implant. Linear and vertical deviations between planned and placed implants were calculated. Deviations at both platform and apical of the implant were measured in the bucco-lingual and mesio-distal directions. Intra- and inter-observer variabilities were calculated to ensure measurement reliability. Multiple linear regression analysis was employed to investigate the effect of the bone condition, such as density, width, and cortical bone thickness at the implant site area, on the accuracy of implant placement (α = 0.05). Result Intra- and inter-observer variabilities of these measurements showed excellent agreement (intra class correlation coefficient ± 0.90). Bone condition significantly influenced the accuracy of implant placement using CGS (p < 0.05). Both bone density and width were found to be significant predictors. Conclusions Low bone density and/or narrow bucco-lingual width near the alveolar bone crest in the implant placement site might be a risk factor influencing the accuracy of implant placement with CGS.

Abstract Background While hand and ultrasonic scalers are the primary tools used for the removal of dental calculus in periodontal treatment, many studies have shown that they also damage the enamel surface. We have developed a novel actuator-driven pulsed water jet (ADPJ) system, which has the ability to selectively remove materials depending on their stiffness. Considering the different material properties between teeth and dental calculus, it might be possible to develop the ADPJ to remove dental calculus without damage to the tooth’s enamel surface using a suitable jet pressure. Therefore, the aim of this study was to assess the effectiveness of the ADPJ in removing dental calculus, and the surface features of the teeth after its use. Methods A total of 93 artificial teeth coated with artificial dental calculus were examined in this study. The weights of 90 teeth were measured before and after the use of ADPJ, which had an applied voltage setting of 150, 200, or 240 V. The three remaining teeth were instrumented with a conventional hand scaler, ultrasonic scaler, or ADPJ (set at 240 V). Damage to the artificial tooth surfaces was evaluated using 5% Evans blue dye under an optical microscope. Furthermore, apatite pellets, which are utilized as experimental substitutes for natural teeth, were assessed after the use of ADPJ and both conventional scalers. Results The ADPJ significantly reduced the amount of artificial calculus, and the removal rate was dependent on the applied voltage. No damage was observed on the surface of the artificial tooth and apatite pellet following the use of ADPJ, in contrast to the conventional scalers. Conclusions The results of this study demonstrate the in vitro effectiveness of ADPJ in the removal of dental calculus, without causing damage to tooth surfaces.

Abstract Background The assimilation between three-dimensional (3D) imaging techniques and dental forensic science can provide rich and stable information for human identification. This study aimed to determine the effective number and surfaces of teeth for dental identification through the 3D imaging approach. Material and methods In the present study, maxillary dental casts were fabricated from subjects who met the inclusion criteria and scanned using a 3D scanner Vivid 910. Rapidform XOS/SCAN software was used to create and trim the 3D point cloud data. Subsequently, two types of 3D surface data of dental casts were registered and the root mean square errors (RMSEs) between subjects were calculated using iterative closest point (ICP) algorithm in MATLAB. Two sets of experiments with 120 combinations of the superimposed 3D dataset were designed, termed as experiments 1 and 2. Results In experiment 1, the difference between subjects was clearly distinguished with a minimum of six teeth of the dental arch. The results of experiment 2 suggest that the labial surfaces of the anterior teeth are sufficient to be used for dental identification. Conclusion Through these experiments for all possible pairs of subjects, a clear difference was observed in the RMSE between the genuine and imposter pairs. These results indicate the potential of using the 3D imaging technique to achieve highly accurate human identification. It is suggested that a future study with a larger sample number will evaluate the robustness and accuracy of this method.

Abstract Background Oral appliances (OAs) are generally designed to displace the mandible anteriorly and downward, to increase the airway patency. The present study aimed to examine the relationship between genioglossus (GG) muscle activity and mandibular position, considering both anterior and vertical displacements during sleep. Methods Seven healthy male adults aged 29.4 ± 1.99 years were evaluated. Maxillary and mandibular OAs were fabricated from 2-mm-thick resin plates with pressure-welding. The activity of the left GG was recorded using two silver ball electrodes attached to the lingual edge of the mandibular OA. Respiratory status and right masseter muscle activity were measured by an airflow sensor and surface electrodes, respectively. Electroencephalography was used to determine the sleep status. Stage 2 (the second stage of sleep) was defined as the state of sleeping. Four test conditions with different mandibular positions (0 and 50% anterior protrusion) and bite openings (4 mm and 12 mm) were examined. Results GG activity in SL4A (4 mm bite opening, 50% protrusion during sleep) and SL12 (12 mm bite opening, 0% protrusion during sleep) were significantly higher than that in SL4 (4 mm bite opening, 0% protrusion during sleep). Respiratory volume did not significantly differ between all test conditions. Conclusion GG activity is influenced not only by anterior protrusion of the mandible but also by vertical displacement during sleep. Thus, when determining the effectiveness of intraoral appliances in the treatment of obstructive sleep apnea, both protrusion and the size of the mandibular opening should be evaluated and taken into account.

Chromium (Cr) is commonly added into various metal alloys to improve some mechanical properties such as corrosion resistance, strength, and workability. However, Cr is also known to be a metal allergen for some individuals. Metal allergy is a T cell-mediated disease with symptoms of inflammation and swelling that involve inflammatory cytokines and prostaglandins. Hence, suppressing these inflammation paths by using COX-2 inhibitor might be useful in treating Cr allergy. In this study, mice were used with Cr-induced allergy challenge model. The mice were injected with celecoxib once per day for 7 days one hour after the challenge. Footpad samples were stained with haematoxylin and eosin (H&E), and lymphocytes were isolated from popliteal lymph nodes for the flow cytometric analysis. The results show that both prostaglandin E2 (PGE2), a known mediator of inflammation, and cyclooxygenases (COX)-2 have important roles in the development of Cr allergy. Further, COX-2 inhibitor, celecoxib, was effective in relieving swelling and inflammation in Cr-allergic mice concordant with suppression of IFN-γ production by CD8+ T cells and T cell accumulation in the lymph nodes. Therefore, the inhibition of COX-2 may be a therapeutic target for Cr allergy, and additional molecules in the PGE2 signalling pathway may also be an effective therapeutic target for the treatment of metal allergy.

This study evaluates the effectiveness and safety of a microscale mist unit (MSM-UNIT) that sprays high-speed fine water droplets to remove dental plaque adhering to the oral mucosa (tongue and palate) and tooth surface. Fifteen patients who had difficulty self-managing sufficient oral care were included in this study. Effectiveness was evaluated for at least five patients’ tongues, palate mucosas, and tooth surfaces, and safety evaluation was conducted at all three sites for all patients. Effectiveness was evaluated using the rate of degree of dental plaque removal. Safety was evaluated using a numerical rating scale (NRS) for pain and symptoms of inflammation. An operator who performed treatment and an evaluator who evaluated effectiveness and safety were designated. In addition, an image judgment committee judged effectiveness. Although evaluation of the tongue varied between the evaluators and the image judgment committee, the rates of degree for all plaque removal increased in all regions. In addition, low pain NRS results and minimal symptoms of inflammation were observed and within an acceptable range. The MSM-UNIT can be used effectively and safely for removing oral plaque not only from teeth, but also from the oral mucosa.

Objective The oxygen concentration within cancer tissue is known to be low, but is expected to increase rapidly when oxygen is supplied by angiogenesis and hematogenous metastasis, suggesting that rapid increases in oxygen levels might influence cancer cell physiology. Therefore, we investigated the effects of oxygen concentration fluctuations on the glucose metabolism of cancer cells. Methods The glucose metabolism of oral squamous cell carcinoma (HSC-2 and HSC-3) and normal epithelial (HaCaT) cells cultured under normoxic (21% oxygen) or hypoxic (1% oxygen) conditions was measured using a pH-stat system under normoxic or hypoxic conditions. The acidic end-products and reactive oxygen species (ROS) generated by glucose metabolism were also measured. Results Under normoxic conditions, the metabolic activity of hypoxically cultured cancer cells was significantly increased, and the production of acids other than lactate was upregulated, while the normal cells did not respond to rapid increases in oxygen levels. ROS production was higher in normoxic conditions in all cells, especially the hypoxically cultured HSC-3 cells. Conclusions Rapid increases in oxygen levels might enhance the glucose metabolism of hypoxically cultured cancer cells by mainly activating the TCA cycle and electron transport system, which might activate cancer cells through the ATP and ROS generation.

Background:Many previous studies have focused on the acetaldehyde produced from ethanol by oral bacteria as a risk factor for oral cancer. Most of these studies involved low ethanol concentrations (ca. 10 mM), but oral bacteria are exposed to a wide range of ethanol concentrations (100–10,000 mM) when alcoholic beverages are consumed. In contrast, ethanol is widely used at high concentrations (> 5,000 mM) as an antiseptic/disinfectant, suggesting that ethanol has bifacial biological effects; i.e. it acts as both a metabolic substrate for bacterial acetaldehyde production and an antimicrobial agent. Materials and methods:We examined the acetaldehyde production from ethanol by oral streptococci and the effects of ethanol exposure on the growth and viability of these bacteria at a wide range of ethanol concentrations (10–10,000 mM). Results:Acetaldehyde production was the highest at an ethanol concentration of 2,000 mM (2.1–48-fold higher than that seen at an ethanol concentration of 10 mM). Bacterial growth was inhibited by > 1,000 mM of ethanol, and the bacteria did not seem viable in the presence of > 5,000 mM of ethanol, although they still produced acetaldehyde. Conclusion:Ethanol has bifacial biological effects, and the concentration ranges of these effects overlap.

To evaluate the localization of responses to stimulation of the periodontal mechanoreceptors in the primary somatosensory cortex, somatosensory evoked fields (SEFs) were measured for stimulation of the left mandibular canine and first molar using magnetoencephalography in 25 healthy subjects. Tactile stimulation used a handmade stimulus device which recorded the trigger at the moment of touching the teeth.SEFs for the canine and first molar were detected in 20 and 19 subjects, respectively. Both responses were detected in the bilateral hemispheres. The latency for the canine was 62.1 ± 12.9 ms in the ipsilateral hemisphere and 65.9 ± 14.8 ms in the contralateral hemisphere. The latency for the first molar was 47.4 ± 6.6 ms in the ipsilateral hemisphere and 47.8 ± 9.1 ms in the contralateral hemisphere. The latency for the first molar was significantly shorter than that for the canine. The equivalent current dipoles were estimated in the central sulcus and localized anteroinferiorly compared to the locations for the SEFs for the median nerve. No significant differences in three-dimensional coordinates were found between the canine and first molar. These findings demonstrate the precise location of the teeth within the orofacial representation area in the primary somatosensory cortex.

The purpose of this study was to investigate the effect of gas species used for low-temperature atmospheric pressure plasma surface treatment, using various gas species and different treatment times, on zirconia surface state and the bond strength between zirconia and dental resin cement. Three groups of zirconia specimens with different surface treatments were prepared as follows: untreated group, alumina sandblasting treatment group, and plasma treatment group. Nitrogen (N2), carbon dioxide (CO2), oxygen (O2), argon (Ar), and air were employed for plasma irradiation. The bond strength between each zirconia specimen and resin cement was compared using a tension test. The effect of the gas species for plasma irradiation on the zirconia surface was investigated using a contact angle meter, an optical interferometer, an X-ray diffractometer, and X-ray photoelectric spectroscopy. Plasma irradiation increased the wettability and decreased the carbon contamination on the zirconia surface, whereas it did not affect the surface topography and crystalline phase. The bond strength varied depending on the gas species and irradiation time. Plasma treatment with N2 gas significantly increased bond strength compared to the untreated group and showed a high bond strength equivalent to that of the sandblasting treatment group. The removal of carbon contamination from the zirconia surface and an increase in the percentage of Zr-O2 on the zirconia surface by plasma irradiation might increase bond strength.

Summary: Metabolic immunomodulation involving IL-1 has been investigated for unfavorable metabolic effects, including obesity, but a potentially favorable role for IL-1 remains unclear. Here, we find mechanistic interactions between working skeletal muscles and locally recruited neutrophils expressing IL-1β, which supports muscle performance through priming exercise-dependent GLUT4 translocation. Thus, during exercise, both IL-1α/β-deficient and neutrophil-depleted mice similarly exhibit increased fatigability associated with impaired muscle glucose homeostasis due to GLUT4 dysregulation. Deficiency of IL-1-producing neutrophils results in intrinsic abnormalities represented by aberrant Rac1 signaling and irregular GLUT4-storage vesicles, suggesting that these properties are maintained by local IL-1 produced by recruited neutrophils upon exercise, possibly on a daily basis. We propose that neutrophils are highly engaged in skeletal muscle performance via IL-1 regulation, which coordinates favorable inflammatory microenvironments supporting muscle glucose metabolism. : Immunometabolic IL-1 action has been investigated under unfavorable conditions such as obesity and insulin resistance, but potential favorable IL-1 actions remain unknown. Tsuchiya et al. reveal mechanistic interactions during exercise between working skeletal muscles and locally recruited neutrophils expressing IL-1β, which positively supports muscle performance by priming exercise-dependent GLUT4 translocation. Keywords: Exercise, immunometabolism, myokines, metabolism, inflammation, GLUT4, Rac1

Optical coherence tomography (OCT) has been emerging in the dental field as an alternative diagnostic imaging for “optical probes” owing to its micro-meter resolution and non-invasiveness. This review aims to answer the following question: what is the imaging capability of OCT to visualize the subgingival area? Online searches were performed on PubMed and SPIE digital library databases, followed by a manual screening of references listed in relevant studies. The feasibility and imaging performance of OCT to visualize the subgingival area, including the periodontal, peri-implant, and crown margins, are discussed. All of the literature reviewed in this study demonstrated that OCT has the ability to visualize periodontal, including hard and soft tissues, and peri-implant conditions with high resolution. Gingival sulcus depth, periodontal pocket, and calculus deposition can also be depicted. However, clinical evidence that support the imaging capability of OCT as a dental optical probe to visualize subgingival area is lacking. Limited availability, portability, and usability of OCT for clinical experiments in dentistry, particularly for the subgingival area, might be contributed to its limitations. Hence, further development of handheld OCT systems and controlled clinical trials are needed to confirm the imaging capability of OCT reported in this review.

Much attention has been paid to three-dimensional cell culture systems in the field of regenerative medicine, since three-dimensional cellular aggregates, or spheroids, are thought to better mimic the in vivo microenvironments compared to conventional monolayer cultured cells. Synthetic calcium phosphate (CaP) materials are widely used as bone substitute materials in orthopedic and dental surgeries. Here we have developed a technique for constructing a hybrid spheroid consisting of mesenchymal stem cells (MSCs) and synthetic CaP materials using a spheroid culture device. We found that the device is able to generate uniform-sized CaP/cell hybrid spheroids rapidly and easily. The results showed that the extent of osteoblastic differentiation from MSCs was different when cells were grown on octacalcium phosphate (OCP), hydroxyapatite (HA), or β-tricalcium phosphate (β-TCP). OCP showed the greatest ability to increase the alkaline phosphatase activity of the spheroid cells. The results suggest that the spheroids with incorporated OCP may be an effective implantable hybrid consisting of scaffold material and cells for bone regeneration. It is also possible that this CaP–cell spheroid system may be used as an in vitro method for assessing the osteogenic induction ability of CaP materials.

The aim of this study was to investigate the dynamic viscoelasticity of dental soft polymer material containing citrate ester-based plasticizers. Three kinds of citrate ester-based plasticizer (Citroflex® C-2: TEC, Citroflex® A-2: ATEC, and Citroflex® A-4: ATBC), with the combination of 5 wt% ethyl alcohol, were used as the liquid phase. The dynamic viscoelastic properties of nine ethyl methacrylate polymers: (A, B, C, D, E, F, G, H, and I) were immersed in 37 °C distilled water for 0, 1, 3, 7, 14 and 30 days, respectively. The dynamic viscoelastic properties were measured at 37 °C with an automatic dynamic mechanical analyzer. The shear storage modulus (G′), shear loss modulus (G″), and loss tangent (tan δ) were determined at 1 Hz. These parameters were statistically analyzed by two-way and one-way ANOVA and Tukey’s multiple comparison test at a predetermined significance level of 0.05. A significant difference was found among the materials in terms of the dynamic viscoelasticity. The materials containing citrate ester-based plasticizer ATBC showed the most stable dynamic viscoelasticity. Considering the limitations of this study, the results suggest that the inclusion of citrate ester-based plasticizer can improve the durability of dental soft polymer materials.

Powder jet machining is one of blasting processes conducted under room temperature and atmospheric pressure. This process brings both deposition and removal process, and in this study, it refers to powder jet deposition (PJD) and abrasive jet machining (AJM). As an application of PJD, the authors have proposed an innovative dental treatment method with the hydroxyapatite (HA) fine particle. By this method, thick HA coating can be fabricated directly in the human oral cavity. In this study, the effect of the particle impact angle was investigated as a parameter that affects the machining phenomenon. The experiments showed that the machining phenomenon transited depending on the blasting angle. In the vertical blasting condition, PJD process was just observed. On the other hand, in the more acute blasting angle such as 45 deg. or 60 deg. both coating and removal process appeared at the same time and in the most acute angle of 30 deg. only removal process was detected. The TEM observations showed that the impact surface of the HA substrate deformed and the deformation depth increased as the blasting angle get more acute. The smoothed particle hydrodynamics (SPH) method was utilized for the analysis for the fracture behavior of the HA substrate. The result indicated that the decrease of the impact angle induced the increase of the strain and the temperature of the interface between the particle and the substrate. Thus it is concluded that the shear stress, which refers to the impact angle, induces the destruction of the substrate by the deformation and the brittle fracture due to the thermal stress.

Somatosensory evoked fields (SEFs) to electrical stimulation on the right and left sides of the lower lip were measured using magnetoencephalography and compared in the bilateral hemispheres of 31 healthy normal young and 29 healthy normal elderly subjects to evaluate age-related change in lip somatosensation. The initial peak of the response around 13 ms, designated as N13m, and the second peak of the response, designated as P21m, were investigated. The N13m response, which was detected in 22 of 62 hemispheres in young adults and 37 of 58 hemispheres in elderly adults, showed significantly prolonged latency and increased equivalent current dipole (ECD) moment in the elderly adults. The P21m response, which was detected in 56 of 62 hemispheres in young adults and in 52 of 58 hemispheres in elderly adults, showed longer peak latency in the elderly adults. No significant difference was found in the ECD moment for P21m, which suggests that aging affected the SEFs of the lip somatosensation, but the effects of aging on N13m and P21m differed. Prolonged latency and increased ECD moment of N13m might result from decreased peripheral conduction and increased cortical excitation system associated with aging. Therefore, the initial response component might be an objective parameter for investigating change in lip function with age.

Nanoparticles represent promising gene delivery systems in biomedicine to facilitate prolonged gene expression with low toxicity compared to viral vectors. Specifically, nanoparticles of calcium phosphate (nCaP), the main inorganic component of human bone, exhibit high biocompatibility and good biodegradability and have been reported to have high affinity for protein or DNA, having thus been used as gene transfer vectors. On the other hand, Octa-arginine (R8), which has a high permeability to cell membrane, has been reported to improve intracellular delivery systems. Here, we present an optimized method for nCaP-mediated gene delivery using an octa-arginine (R8)-functionalized nCaP vector containing a marker or functional gene construct. nCaP particle size was between 220-580 nm in diameter and all R8-functionalized nCaPs carried a positive charge. R8 concentration significantly improved nCaP transfection efficiency with high cell compatibility in human mesenchymal stem cells (hMSC) and human osteoblasts (hOB) in particular, suggesting nCaPs as a good option for non-viral vector gene delivery. Furthermore, pre-treatment with different endocytosis inhibitors identified that the endocytic pathway differed among cell lines and functionalized nanoparticles, with amiloride increasing transfection efficiency of R8-functionalized nCaPs in hMSC and hOB.

Calcium Titanate (CaTiO3) has been introduced as an attractive biomaterial for the enhancement of calcium phosphate deposition in vivo and in vitro. We hypothesized that CaTiO3 directly coated on titanium (Ti) by metal-organic chemical vapor deposition (MOCVD) could be a suitable candidate for biocompatible coatings for medical devices, particularly dental implants. To prove this hypothesis, surface characterization, cell culture, and animal study were completed in this study. The result of this study showed that CTO 800, a CaTiO3 film prepared by heating at 800 °C, had a high hydrophilic surface. Mouse bone marrow stromal ST-2 cells cultured on substrates and CTO 800 exhibited cell differentiation, represented by alkaline phosphatase activity, compared with cells cultured on non-coated Ti and CTO 700 (a CaTiO3 film prepared by heating at 700 °C). The push-in test value of CTO 800, a parameter that indicates the degree of osseointegration, was significantly higher than that of Ti. Calcium titanate coated on Ti by MOCVD has the potential to accelerate the process of osseointegration; thus, our results support the use of CaTiO3 coating for biocompatible biomaterial for medical applications, particularly dental implants.

Ti-Ag alloys with 20 and 25 mass% Ag were prepared; their surfaces were polished using silicon carbide abrasive papers. The polished alloys were immersed in a simulated body fluid (SBF), and their surfaces were observed by scanning electron microscope (SEM) to investigate the spontaneous formation of calcium phosphates. The precipitates formed on the alloys were qualitatively and quantitatively analyzed using an electron probe microanalyzer (EPMA), with pure titanium and silver used as controls. Hardness and surface roughness, which was measured as the height parameter Ra, were examined, and their effect on calcium phosphate formation was elucidated. On immersion in SBF, calcium phosphates were formed on the Ti-Ag alloys and pure titanium but not on pure silver. The amount of the precipitate and the concentration ratios of calcium to phosphorus in the precipitates of the Ti-Ag alloys and pure titanium did not differ significantly. The Ti-Ag alloys showed significantly higher hardness and lower Ra values than pure titanium. The Ra values of the metals decreased as their hardness increased. The Ra values of the metals appeared to have very little effect on calcium phosphate formation. The results of this study have verified the biocompatibility of the Ti-Ag alloys, making them suitable for use as dental and orthopedic implants.

The authors have proposed a new dental treatment method by using powder jet deposition (PJD) technique to make coatings on human teeth. The method utilizes hydroxyapatite (HA), which is the main element of human hard tissue, as a restoration material. The coating process is achieved by high speed impacts of the particles on a tooth, and it can be carried out under room temperature and the atmospheric pressure. The thick PJD film is obtained through the accumulation of fractured parts of particles. This study focuses on the microstructures of the HA particles and the deposited film. To investigate the effect of particle crystal structures, two types of HA particles were produced: one (Type A particle) is covered with an amorphous surface, whose thickness is approximately tens of micrometers; the other one (Type B particle) is a type of complete-crystal-growth particles, which are produced by heating the particle A at 230°C for 12 hours. The film fabrication experiments were performed with these particles and machined areas were observed with a scanning electron microscope. It was found that the fabricated film with Type A particles was spalled during blasting. In contrast, the fabricated HA film with Type B particles is well deposited without film spalling. To further investigate the microstructures of the HA film, observations with a transmission electron microscope were conducted. The dark field image of the film with a Type A particle implies that the created HA layer consists of HA crystals of one to tens of nanometers. The bright field image indicates that cracks of approximately 300 nm generated in the film. Thus the mechanical strength of the film fabricated using the Type A particle is not strong enough against the subsequent particle impacts and the pressure of blasted air. In contrast, cracks were not observed in the film created with the Type B particle.

Physical exercise reportedly stimulates IL-1 production within working skeletal muscles, but its physiological significance remains unknown due to the existence of two distinct IL-1 isoforms, IL-1α and IL-1β. The regulatory complexities of these two isoforms, in terms of which cells in muscles produce them and their distinct/redundant biological actions, have yet to be elucidated. Taking advantage of our masticatory behavior (Restrained/Gnawing) model, we herein show that IL-1α/1β-double-knockout (IL-1-KO) mice exhibit compromised masseter muscle (MM) activity which is at least partially attributable to abnormalities of glucose handling (rapid glycogen depletion along with impaired glucose uptake) and dysfunction of IL-6 upregulation in working MMs. In wild-type mice, masticatory behavior clearly increased IL-1β mRNA expression but no incremental protein abundance was detectable in whole MM homogenates, whereas immunohistochemical staining analysis revealed that both IL-1α- and IL-1β-immunopositive cells were recruited around blood vessels in the perimysium of MMs after masticatory behavior. In addition to the aforementioned phenotype of IL-1-KO mice, we found the IL-6 mRNA and protein levels in MMs after masticatory behavior to be significantly lower in IL-1-KO than in WT. Thus, our findings confirm that the locally-increased IL-1 elicited by masticatory behavior, although present small in amounts, contributes to supporting MM activity by maintaining normal glucose homeostasis in these muscles. Our data also underscore the importance of IL-1-mediated local interplay between autocrine myokines including IL-6 and paracrine cytokines in active skeletal muscles. This interplay is directly involved in MM performance and fatigability, perhaps mediated through maintaining muscular glucose homeostasis.

The bactericidal effect of hydroxyl radical (·OH) generated by combination of photolysis of hydrogen peroxide (H2O2) and sonolysis of water was examined under the condition in which the yield of ·OH increased additively when H2O2 aqueous solution was concomitantly irradiated with laser and ultrasound. The suspension of Staphylococcus aureus mixed with the different concentrations of H2O2 was irradiated simultaneously with a laser light (wavelength: 405 nm, irradiance: 46 and 91 mW/cm2) and ultrasound (power: 30 w, frequency: 1.65 MHz) at 20 ± 1°C of the water bulk temperature for 2 min. The combination of laser and ultrasound irradiation significantly reduced the viable bacterial count in comparison with the laser irradiation of H2O2 alone. By contrast, the ultrasound irradiation alone exerted almost no bactericidal effect. These results suggested that the combination effect of photolysis of H2O2 and sonolysis of water on bactericidal activity was synergistic. A multi-way analysis of variance also revealed that the interaction of H2O2 concentration, laser power and ultrasound irradiation significantly affected the bactericidal activity. Since the result of oxidative DNA damage evaluation demonstrated that the combination of laser and ultrasound irradiation significantly induced oxidative damage of bacterial DNA in comparison with the laser irradiation of H2O2 alone, it was suggested that the combination effect of photolysis of H2O2 and sonolysis of water on bactericidal activity would be exerted via oxidative damage of cellular components such as DNA.

With ever-growing aging population and demand for denture treatments, pressure-induced mucosa lesion and residual ridge resorption remain main sources of clinical complications. Conventional denture design and fabrication are challenged for its labor and experience intensity, urgently necessitating an automatic procedure. This study aims to develop a fully automatic procedure enabling shape optimization and additive manufacturing of removable partial dentures (RPD), to maximize the uniformity of contact pressure distribution on the mucosa, thereby reducing associated clinical complications. A 3D heterogeneous finite element (FE) model was constructed from CT scan, and the critical tissue of mucosa was modeled as a hyperelastic material from in vivo clinical data. A contact shape optimization algorithm was developed based on the bi-directional evolutionary structural optimization (BESO) technique. Both initial and optimized dentures were prototyped by 3D printing technology and evaluated with in vitro tests. Through the optimization, the peak contact pressure was reduced by 70%, and the uniformity was improved by 63%. In vitro tests verified the effectiveness of this procedure, and the hydrostatic pressure induced in the mucosa is well below clinical pressure-pain thresholds (PPT), potentially lessening risk of residual ridge resorption. This proposed computational optimization and additive fabrication procedure provides a novel method for fast denture design and adjustment at low cost, with quantitative guidelines and computer aided design and manufacturing (CAD/CAM) for a specific patient. The integration of digitalized modeling, computational optimization, and free-form fabrication enables more efficient clinical adaptation. The customized optimal denture design is expected to minimize pain/discomfort and potentially reduce long-term residual ridge resorption.

Our previous study showed that exposing mouse fibroblasts to proanthocyanidin (PA) for only 1 min accelerated cell proliferation in a concentration-dependent manner. In this study, exposing human gingival fibroblasts (HGFs) to PA for 1 min similarly accelerated the proliferative response of the cells. Besides the accelerated proliferative response, PA showed a cytoprotective effect on HGFs exposed to harsh environmental conditions; short-term exposure of HGFs in the mitotic phase to pure water or physiological saline resulted in a lower recovery of viable cells. Pretreatment and concomitant treatment with PA improved the low recovery of cells exposed to pure water or physiological saline. In addition, HGFs exposed to PA for 1 min proliferated well even after being cultured in serum-free medium. In 100% confluent HGFs, being cultured in serum-free medium resulted in a high intracellular reactive oxygen species (ROS) level, but pretreatment with PA prevented the cells from increasing intracellular ROS. Thus, the results suggest that a short-term PA treatment exerts cytoprotective effects on HGFs exposed to harsh environmental conditions by improving the intracellular oxidative stress response.

Nickel, cobalt, and chromium are well known to be causal agents of allergic contact dermatitis. Palladium (Pd) can also cause allergic disease and exposure results from wide use of this metal in dental restorations and jewelry. Metal allergy is categorized as a delayed-type hypersensitivity, and metal-responsive T cell clones have been isolated from allergic patients. However, compared to nickel, little is known about the pathology of allergic disease mediated by Pd, and pathogenic T cells are poorly understood. To identify the pathogenic T cells that are responsible for onset of Pd allergy, we enriched metal-responsive lymphocytes by sequential adoptive transfer of involved lymph node cells. Here we show that sequential adoptive transfer gradually increased the incidence and the intensity of Pd allergy, and CD8⁺ T cells are responsible for the disease as CD8⁺ T cell-depleted mice and β2-microglobulin-deficient mice did not develop Pd allergy. In addition, we found that draining lymph node cells skewed toward CD8⁺ T cells in response to Pd challenge in 8th adoptive transferred recipient mice. The CD8⁺ T cells expressed NKG2D, a costimulatory molecule involved in the production of IFN-γ. NKG2D ligand was also induced in Pd-injected tissues. Furthermore, both NKG2D ligand-transgenic mice, where NKG2D is downmodulated, and IFN-γ-deficient mice showed impaired Pd allergy. Taken together, these results indicate that IFN-γ-producing NKG2D⁺ CD8⁺ T cells are responsible for Pd allergy and suggest that NKG2D is a potential therapeutic target for treatment of metal allergy.

The purpose of the present study was to evaluate the risk of inducing bacterial resistance to disinfection treatment with photolysis of H2O2 and comparing this with existing antibacterial agents. We tested seven antibacterial agents, including amoxicillin, cefepime hydrochloride, erythromycin, ofloxacin, clindamycin hydrochloride, ciprofloxacin hydrochloride, and minocycline hydrochloride, as positive controls for validation of the assay protocol. For all of the agents tested, at least one of the four bacterial species (Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, and Streptococcus salivarius) was resistant to these agents by repeated exposure to subinhibitory concentrations of the agents up to 10 times. In contrast, antibacterial activity against any of the bacterial species tested (S. aureus, E. faecalis, E. coli, S. salivarius, Pseudomonas aeruginosa, Streptococcus mutans, and Aggregatibacter actinomycetemcomitans) was not affected by repeated exposure to the disinfection treatment up to 40 times. This finding suggested that the risk of inducing bacterial resistance by disinfection treatment was low. The active ingredient of this disinfection treatment is hydroxyl radicals generated by photolysis of H2O2. Therefore, hydroxyl radicals interact with several cell structures and different metabolic pathways in microbial cells, probably resulting in a lack of development of bacterial resistance. In conclusion, disinfection treatment with photolysis of H2O2 appears to be a potential alternative for existing antimicrobial agents in terms of a low risk of inducing bacterial resistance.

In the present study, the bactericidal effect of photo-irradiated proanthocyanidin was evaluated in relation to reactive oxygen species formation. Staphylococcus aureus suspended in proanthocyanidin aqueous solution was irradiated with light from a laser at 405 nm. The bactericidal effect of photo-irradiated proanthocyanidin depended on the concentration of proanthocyanidin, the laser irradiation time, and the laser output power. When proanthocyanidin was used at the concentration of 1 mg/mL, the laser irradiation of the bacterial suspension could kill the bacteria with a >5-log reduction of viable cell counts. By contrast, bactericidal effect was not observed when proanthocyanidin was not irradiated. In electron spin resonance analysis, reactive oxygen species, such as hydroxyl radicals, superoxide anion radicals, and hydrogen peroxide, were detected in the photo-irradiated proanthocyanidin aqueous solution. The yields of the reactive oxygen species also depended on the concentration of proanthocyanidin, the laser irradiation time, and the laser output power as is the case with the bactericidal assay. Thus, it is indicated that the bactericidal effect of photo-irradiated proanthocyanidin is exerted via the reactive oxygen species formation. The bactericidal effect as well as the yield of the oxygen radicals increased with the concentration of proanthocyanidin up to 4 mg/mL, and then decreased with the concentration. These findings suggest that the antioxidative activity of proanthocyanidin might prevail against the radical generation potency of photo-irradiated proanthocyanidin resulting in the decreased bactericidal effect when the concentration is over 4 mg/mL. The present study suggests that photo-irradiated proanthocyanidin whenever used in an optimal concentration range can be a new disinfection technique.

BACKGROUND: Photodynamic therapy (PDT) has been suggested as an efficient clinical approach for the treatment of dental plaque in the field of dental care. In PDT, once the photosensitizer is irradiated with light of a specific wavelength, it transfers the excitation energy to molecular oxygen, which gives rise to singlet oxygen. METHODOLOGY/PRINCIPAL FINDINGS: Since plaque disclosing agents usually contain photosensitizers such as rose bengal, erythrosine, and phloxine, they could be used for PTD upon photoactivation. The aim of the present study is to compare the ability of these three photosensitizers to produce singlet oxygen in relation to their bactericidal activity. The generation rates of singlet oxygen determined by applying an electron spin resonance technique were in the order phloxine > erythrosine ≒ rose bengal. On the other hand, rose bengal showed the highest bactericidal activity against Streptococcus mutans, a major causative pathogen of caries, followed by erythrosine and phloxine, both of which showed activity similar to each other. One of the reasons for the discrepancy between the singlet oxygen generating ability and bactericidal activity was the incorporation efficiency of the photosensitizers into the bacterial cells. The incorporation rate of rose bengal was the highest among the three photosensitizers examined in the present study, likely leading to the highest bactericidal activity. Meanwhile, the addition of L-histidine, a singlet oxygen quencher, cancelled the bactericidal activity of any of the three photoactivated photosensitizers, proving that singlet oxygen was responsible for the bactericidal action. CONCLUSIONS: It is strongly suggested that rose bengal is a suitable photosensitizer for the plaque disclosing agents as compared to the other two photosensitizers, phloxine and erythrosine, when used for PDT.

Abstract Objective The aim of this in vitro study was to investigate the effect of two desensitizing agents and water on hydraulic conductance in human dentin. Material and Methods GLUMA Desensitizer PowerGel (GLU) contains glutaraldehyde (GA) and 2-hydroxyethyl methacrylate (HEMA), and Teethmate Desensitizer (TD) is a powder comprising tetracalcium phosphate (TTCP) and dicalcium phosphate anhydrous (DCPA) that is mixed with water. Deionized water was used as a negative control (CTR). Thirty discs with a thickness of 1.2 mm were cut from the coronal dentin of the third molars and cleaned with 0.5 M EDTA (pH 7.4). After being mounted in a split-chamber device, the discs were pressurized with water at 1 kPa and 3 kPa in order to measure flow rates with a highly sensitive micro-flow sensor and to calculate hydraulic conductance as a baseline value (BL). Following the application of GLU, TD, and CTR (n=10), hydraulic conductance was remeasured with intermittent storage in water after 15 min, 1 d, 1 w, and 1 m. Reduction in permeability (PR%) was calculated from hydraulic conductance. Data were statistically analyzed using nonparametric methods (α

Purpose: To evaluate the effect of different abutment screw retightening procedures on the screw stability between the abutment and implant. Materials and Methods: External hexagon connection (EHC) and internal trichannel connection (ITC) implants were employed in this study. Each abutment screw was used for the following specific applications (n = 5 for each group): group 0 = abutment was tightened and retightened with a 10-minute interval; group 1 = abutment was tightened and retightened with a 10-minute interval, then loaded for 500,000 cycles; group 2 = abutment was loaded for 83,000 cycles during tightening and retightening, then loaded for 500,000 cycles; group 3 = abutment was loaded for 167,000 cycles during tightening and retightening, then loaded for 500,000 cycles; and group 4 = abutment was loaded for 250,000 cycles during tightening and retightening, then loaded for 500,000 cycles. Both tightening and retightening torques were set at 35 Ncm, and dynamic oblique loading between 0 N and 200 N was applied on the abutment in all groups. The settling values of the abutments after retightening and the abutment removal torque values (RTVs) after testing were measured. Results: No significant differences in settling values were found between EHC and ITC. There were significant differences in the RTVs of EHC implants, but ITC implants showed no difference in RTV with different prosthetic retightening applications. Conclusion: The retightening application affected the joint stability of EHC implants but did not affect the settlement and joint stability of ITC implants. [ABSTRACT FROM AUTHOR]

Purpose: To examine the effect of tightening and loosening the dental implant screw on implant osseointegration in an elderly rat model.Materials and Methods: Titanium dental implants were inserted in the bilateral tibiae of 34 elderly Wistar rats (1 year and 3 months old). Rats were randomly divided into five groups: control (no loading); immediate loading (IL) (vertical load [3 Hz for 15 minutes/day] immediately after implantation); early loading (EL) (load started on postoperative day 7); five times abutment removal (R5) (tightening and loosening of the abutment screw once per day for 5 days each week); and two times abutment screw removal (R2) (tightening and loosening of the abutment screw once per day for 2 days each week). After 4 weeks, the rats were euthanized, and the bone structure surrounding the dental implants was evaluated using microcomputed tomography analysis.Results: Osseointegration failed more frequently in the EL, R2, and R5 groups than in the control and IL groups (P = .06). The EL, R2, and R5 groups also tended to have lower relative gray values than the control and IL groups.Conclusion: Tightening and loosening the abutment screw might negatively affect dental implant osseointegration in the early healing stage in older adults. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to evaluate the influence of subcrestal implant placement depth on bone remodeling using time-dependent finite element analysis (FEA) with a bone-remodeling algorithm over 12 months. Methods: Seven models of different subcrestal implant placement depths (0, 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 mm) were analyzed using FEA to evaluate the biomechanical responses in the bone and implant, including von Mises equivalent stress, strain energy density (SED), and overloading elements. SED was used as a mechanical stimulus to simulate cortical and cancellous bone remodeling over the first 12 months after final prosthesis delivery. Results: The highest increase in cortical bone density was observed at Depth 1.5, whereas the lowest increase was observed at Depth 3.0. In contrast, the highest increase in bone density was observed at Depth 3.0 in the cancellous bone, whereas the lowest increase was observed at Depth 0. The highest peak von Mises stress in the cortical bone occurred at Depth 2.5 (107.24 MPa), while that in the cancellous bone was at Depth 2.5 (34.55 MPa). Notably, the maximum von Mises stress values in the cancellous bone exceeded the natural limit of the bony material, as indicated by the overloading elements observed at the depths of 2.0, 2.5, and 3.0 mm. Conclusions: Greater bone density apposition is observed with deeper implant placement. An implant depth of more than 1.5 mm exhibited a higher maximum von Mises stress and greater overloading elements. [ABSTRACT FROM AUTHOR]