Search

Abstract Background The generation of clean and affordable energy by 2030 is a challenging task, necessitating the integration of renewable energy sources to reduce greenhouse gas emissions associated with coal, crude oil, and natural gas. This study examines the optimization and performance analysis of a hybrid microgrid for a university campus as a potential solution to achieve this goal. The primary objective is to decrease the cost of energy and reduce CO2 emissions on the campus using a hybrid approach. Results The Howard college campus of the University of KwaZulu Natal (UKZN) was used as a case study, with meteorological data obtained from NASA and real hourly electrical load data for 2019 from the university smart meters. HOMER, an optimization software, was employed to model and simulate the case study. The results demonstrated significant savings of R15.7 million (approximately $ 820 000) in annual utility bills, a 51% reduction in CO2 emissions, a return on investment of 20%, and a payback period of 4 years. Conclusion The study's findings suggest that universities can become self-sustaining during load shedding periods, as recently experienced in South Africa. The implementation of a hybrid microgrid system on a university campus offers considerable economic and environmental benefits, providing a potential blueprint for other large institutions seeking to achieve similar sustainability goals.

Standalone rural microgrid (MG) systems are considered as a sustainable and economical solutions towards rural area electrifications. Specific control schemes are necessary to adopt for reliable and economic performance of these rural MGs. This study focuses on the optimal utilization of biomass potential considering specific applications of bio generator (BG) with BG-PV-WT-BSS and BG-PV-SMES based standalone rural MG systems. In the first case of the BG-PV-WT-BSS, the optimal sizing/selection of DGs of a rural MG has been proposed using the improved-MILP (I-MILP) approach. The objectives of this study were to minimize total net present cost (TNPC), the levelized cost of energy (LCOE) and GHG emissions. In the second case of BG-PV-SMES, the simulation model of the rural microgrid consisting of a variable speed bio generator (VSBG) and photovoltaic (PV) has been developed. Afterwards, a simplified EMS has been designed for the coordinated operation control of the distributed energy resources (DERs) in the rural MGs using MATLAB/Simulink® environment. For the DGs connected via power converter, FOSMC and FCS-MPC based coordinated control has been proposed in the simplified EMS. The purpose of the FOSMC and FCS-MPC based power converter is the improvement of the system performance (for instance power quality, regulated voltage and THD) under external disturbances. Simulation analysis shows the better operation of FOSMC and FCS-MPC under less THD and improved power quality.

The requirement for clean energy has increased drastically over the years due to the emission of CO2 and the degrading of the environment by introducing Renewable Energy Systems (RES) into the existing power grid. While these systems are a positive change, they come at a cost, with some issues relating to the stability of the grid and feasibility. Hence, this research paper closely investigates the modeling and interlinking of photovoltaic (PV)-based solar power and Double-Fed Induction Generator (DFIG)-based wind turbines with the conventional power systems. RES has been known to contribute to a highly non-linear system and complexity. To return the power systems to their original state after a load disturbance, a novel control technique based on the fractional-order Type-2 Fuzzy logic system, well developed via particle swarm optimization (PSO), has been utilized for solving the frequency control problem of a renewable interlinked power system. The efficacy of the proposed technique is validated for various possible operating conditions and the system results are compared with some of the recent methods with and without including non-linearity, and the performance of the controllers is superimposed on frequency/time graphs for ease of understanding to show the benefits of the proposed research work.

The integration of hybridized renewable energy sources (RES) with AC/DC converters has become the focus of the 21st century for green Information Communication Technology (ICT) applications such as the data center. As the data traffic grows exponentially, the corresponding demand for energy to drive the growth becomes a great challenge and considering the environmental impact, a hybrid renewable energy system is favored for eco-sustainability and economic reasons. This is especially true for data centers which represent a dominant share of the total power in cellular networks. This paper evaluates the actual performance of a fuel cell in a renewable energy hybrid system considering the hybridization of photovoltaic (PV), Wind, Fuel Cell, and battery storage system with a choice of a half-grid mode. The reduction and the absence of available PV power by shading and rainy conditions will be easily reduced by the compensation of the other renewable sources. The modeling and simulations are performed using HOMER software. The results show the effectiveness of the proposed system as the energy supply is less intermittent and more stable.