Search

In this study, solid dispersions of prednisolone (PRD) and bovine serum albumin (BSA) were prepared by spray drying and freeze drying methods using a PRD:BSA solution [20:1 molar ratio (MR)]. PRD-BSA dispersed mixtures were characterized by scanning electron microscopy (SEM), and powder X-ray diffraction (XRD), and differential scanning calorimetry (DSC). PRD-BSA physical and dispersed mixtures showed significantly higher solubility in water than that of unprocessed drug. Enhancement factor of six was obtained in both physical mixture and solid dispersion solubility studies. In-vitro dissolution and release studies under physiological conditions showed an immediate release of PRD from the solid dispersions, with almost 90% of the drug dissolved in the first 10 min. PRD was immediately released from BSA binding complex. This study demonstrates the potential for the use of BSA to enhance the solubility and dissolution rate, hence bioavailability, of the unionizable drugs. [ABSTRACT FROM AUTHOR]

The perfluorosulfonic acid (PFSA) Aquivion PW98 is an amphiphilic solid superacid which is shown to catalyze the conversion of cellulose into amphiphilic alkyl glycosides (AAGs) in 85 % yield (with 97 % selectivity). The process involves a mechanocatalytic depolymerization of cellulose followed by a direct glycosylation with n-dodecanol. In comparison to H2SO4 and solid acid catalysts commonly employed in cellulose processing, Aquivion PFSA PW98 is not only recyclable but also exhibits superior catalytic performances in terms of yield, selectivity, and reactor productivity. [ABSTRACT FROM AUTHOR]

Originally inspired by biological neural networks, artificial neural networks (ANNs) are powerful mathematical tools that can solve complex nonlinear problems such as filtering, classification, prediction and more. This paper demonstrates the first successful implementation of ANN, specifically nonlinear autoregressive with exogenous input (NARX) networks, to estimate the hemodynamic states and neural activity from simulated and measured real blood oxygenation level dependent (BOLD) signals. Blocked and event-related BOLD data are used to test the algorithm on real experiments. The proposed method is accurate and robust even in the presence of signal noise and it does not depend on sampling interval. Moreover, the structure of the NARX networks is optimized to yield the best estimate with minimal network architecture. The results of the estimated neural activity are also discussed in terms of their potential use. [ABSTRACT FROM AUTHOR]

This paper compares the design and performance of kink actuators, a modified version of the bent-beam thermal actuator, to the standard chevron-shaped designs. A variety of kink and chevron actuator designs were fabricated from polysilicon. While the actuators were electrically probed, these designs were tested using a probe station connected to a National Instruments (NI) controller that uses LabVIEW to extract the displacement results via image processing. The displacement results were then used to validate the thermal-electric-structural simulations produced by COMSOL. These results, in turn, were used to extract the stiffness for both actuator types. The data extracted show that chevron actuators can have larger stiffness values with increasing offsets, but at the cost of lower amplification factors. In contrast, kink actuators showed a constant stiffness value equivalent to the chevron actuator with the highest amplification factor. The kink actuator also had larger amplification factors than chevrons at all designs tested. Therefore, kink actuators are capable of longer throws at lower power levels than the standard chevron designs. [ABSTRACT FROM AUTHOR]

Here we report that sulfonated crystal-like benzene-silica is much more robust and active than conventionally used periodic mesoporous silica for catalyzing aqueous organic reactions. [ABSTRACT FROM AUTHOR]

In this study, bovine serum albumin (BSA) and alginate (ALG) conjugates were synthesized by the Maillard reaction in order to evaluate their potential to develop controlled release drug delivery systems. The progress of the Maillard reaction was evidenced using ultraviolet (UV) absorbance, determination of BSA remaining free amino groups, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). BSA-ALG conjugates possessed enhanced and tunable viscosity, foamability and foam stability. Foam generated from BSA-ALG conjugate solution was used to prepare floating gastroretentive calcium ALG beads. Unlike traditional ALG beads, BSA-ALG foam beads were able to float and sustain the ciprofloxacin (CIP) release in gastric medium. Interestingly, intestinal beads made of ALG, BSA-ALG physical mixture and BSA-ALG conjugate resulted in different release rates and orders of indomethacin (IND) in simulated intestinal fluids; while beads based on a physical mixture of BSA-ALG resulted in a first order sustained release profile, both systems based on ALG and BSA-ALG conjugate displayed zero order sustained release profiles with IND being released at a slower rate from the conjugate beads. [ABSTRACT FROM AUTHOR]

This systematic experimental investigation reveals that high-frequency ultrasound irradiation (550 kHz) induced oxidation of D-glucose to glucuronic acid in excellent yield without assistance of any (bio)catalyst. Oxidation is induced thanks to the in situ production of radical species in water. Experiments show that the dissolved gases play an important role in governing the nature of generated radical species and thus the selectivity for glucuronic acid. Importantly, this process yields glucuronic acid instead of glucuronate salt typically obtained via conventional (bio)catalyst routes, which is of huge interest in respect of downstream processing. Investigations using disaccharides revealed that radicals generated by high frequency ultrasound were also capable of promoting tandem hydrolysis/oxidation reactions. [ABSTRACT FROM AUTHOR]

The low thermal efficiency and low water production are among the major challenges that prevent membrane distillation (MD) process from being commercialized. In an effort to design an efficient multi-stage direct contact MD (DCMD) unit through mathematical simulation, a new phenomenon that we refer to as total water production capacity inversion (WPI) has been detected. It is represented by a decrease in the total water production beyond a number of stages or a certain module length. WPI phenomenon, which was confirmed by using two different mathematical models validated experimentally, was found to take place due to the decrease in water vapor flux across the membrane as well as the increase in heat loss by conduction as the membrane length increases. Therefore, WPI should be considered as a critical MD design-criterion, especially for large scale units. Investigations conducted for a simulated multi-stage DCMD process showed that inlet feed and permeate temperatures difference, feed and permeate flow rates, and feed salinity have different effects on WPI. The number of stages (or module length at constant width) that leads to a maximum water production has been determined for different operating parameters. Decreasing inlet feed and permeate temperatures difference, or inlet feed and permeate flow rates and increasing inlet feed temperature at constant temperature difference or inlet feed salinity cause the WPI to take place at lower number of stages. Even though the feed salinity affects negligibly the mean permeate flux, it was clearly shown that it can affect WPI. The results presented herein unveil a hidden phenomenon that is likely to occur during process scale-up procedures and should be considered by process engineers for a proper choice of system design and operating conditions. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the use of bovine serum albumin (BSA) as a solubility enhancer for indometacin (IND) as a model drug. IND-BSA solid dispersions were prepared by both spray drying and freeze drying techniques using IND:BSA solution (20:1 Molar Ratio (MR)) and IND:BSA suspension (100:1 MR). The solid state of IND in solid dispersions was characterised by SEM, DSC and XRD. The aqueous solubility of IND in the presence of increased amounts of BSA was evaluated. Additionally, IND dissolution and release profiles were evaluated. IND in solid dispersions with BSA showed significantly higher solubility in water than that of the physical mixture of both. Enhancement factors of 24,000 and 100,000 were obtained for the solid dispersion formulated in 20:1 MR and 100:1 MR, respectively. Dissolution studies in-vitro indicated a significant increase in the dissolution rate of IND from solid dispersions compared to that of the free drug, with almost 95% of the drug dissolved in the first 5 min. Furthermore, an immediate release of IND from BSA solid dispersions was shown. The potential use of albumin as solubility enhancer for poorly soluble drugs, particularly, for immediate release volume-limited dosage forms is reported. [ABSTRACT FROM AUTHOR]