Search

Using electrocatalytic water reduction to produce hydrogen fuel offers significant potential for clean energy, yet its large-scale adoption depends on developing cost-effective, non-precious, and efficient catalysts to replace expensive Pt-based state-of-the-art HER catalysts. The catalytic HER performance of an active catalyst largely depends on the available catalytic active sites, conductivity, and intrinsic electrochemical kinetics, all of which can be altered by incorporating a heteroatom into the active catalyst structure. Herein, we synthesized a unique nitrogen-doped CuO@CuS (NCOS) core–shell-structured catalyst through a facile hydrothermal process followed by an efficacious nitrogenation process, and its electrochemical performance for the HER was systematically analyzed. The NCOS core–shell-structured catalyst exhibits a reduced overpotential (55 mV) and Tafel slope (107 mV dec−1) compared to the pure CuS (CS; 179 mV and 201 mV dec−1) catalyst at a current density of 10 mA cm−2. Moreover, the NCOS core–shell-structured catalyst demonstrates excellent endurance for up to 50 h of chronopotentiometric testing at a driving current density rate of 10 and 100 mA cm−2. This excellent catalytic HER activity is a result of an increased electron transfer rate and a greater number of accessible active sites, attributed to a change in structural properties and the high electronic conductivity aroused from nitrogen incorporation, as evidenced from the TOF and EIS curve analyses. [ABSTRACT FROM AUTHOR]

Silicon belongs to group 14 elements along with carbon, germanium, tin, and lead in the periodic table. Similar to carbon, silicon is capable of forming a wide range of stable compounds, including silicon hydrides, organosilicons, silicic acids, silicon oxides, and silicone polymers. These materials have been used extensively in optoelectronic devices, sensing, catalysis, and biomedical applications. In recent years, silicon compounds have also been shown to be suitable for stabilizing delicate halide perovskite structures. These composite materials are now receiving a lot of interest for their potential use in various real‐world applications. Despite exhibiting outstanding performance in various optoelectronic devices, halide perovskites are susceptible to breakdown in the presence of moisture, oxygen, heat, and UV light. Silicon compounds are thought to be excellent materials for improving both halide perovskite stability and the performance of perovskite‐based optoelectronic devices. In this work, a wide range of silicon compounds that have been used in halide perovskite research and their applications in various fields are discussed. The interfacial stability, structure–property correlations, and various application aspects of perovskite and silicon compounds are also analyzed at the molecular level. This study also explores the developments, difficulties, and potential future directions associated with the synthesis and application of perovskite‐silicon compounds. [ABSTRACT FROM AUTHOR]

Extensive efforts are being dedicated to developing high-performance electrocatalysts for water splitting to achieve efficient and stable hydrogen production, especially under high current densities. In this study, we synthesised a CoMo microcolumn arrays (MCA)/Fe-nanowires (NWs)/nickel foam (NF) catalyst through a simple yet effective combination of hydrothermal and solution-based methods. This catalyst exhibits remarkable performance during the oxygen evolution reaction (OER), achieving a low overpotential of 425 mV at a current density of 2000 mA cm-2 and maintaining stability for 200 h at a current density of 1000 mA cm-2 in 1 M KOH. In natural alkaline seawater, the catalyst demonstrates an overpotential of 464 mV at a current density of 1000 mA cm-2, with stability extending to 250 h at a current density of 500 mA cm-2. These overpotentials are lower than that required for hypochlorite production (>490 mV). Furthermore, during alkaline full seawater splitting, the synthesised catalyst delivers a cell voltage of 1.861 V at a current density of 1000 mA cm-2, sustaining stability for 100 h at a current density of 500 mA cm-2. The heterointerfaces in the CoMo-MCA/Fe-NWs/NF structure optimise the electronic configuration, enhancing OER activity. The MCA structure and Fe2O3 NWs increase the electrochemically active surface area, providing numerous active sites and ensuring long-term durability under harsh conditions. This study suggests a promising approach for industrial-scale seawater electrolysis by engineering effective heterostructures and interfacial active sites. [ABSTRACT FROM AUTHOR]

Water electrolysis is a highly efficient route to produce ideally clean H2 fuel with excellent energy conversion efficiency and high gravimetric energy density, without producing carbon traces, unlike steam methane reforming, and it resolves the issues of environmental contamination via replacing the conventional fossil fuel. Particular importance lies in the advancement of highly effective non-precious catalysts for the oxygen evolution reaction (OER). The electrocatalytic activity of an active catalyst mainly depends on the material conductivity, accessible catalytically active sites, and intrinsic OER reaction kinetics, which can be tuned via introducing N heteroatoms in the catalyst structure. Herein, the efficacious nitrogenation of CuS was accomplished, synthesized using a hydrothermal procedure, and characterized for its electrocatalytic activity towards OER. The nitrogen-doped CuO@CuS (N,CuO@CuS) electrocatalyst exhibited superior OER activity compared to pristine CuS (268 and 602 mV), achieving a low overpotential of 240 and 392 mV at a current density of 10 and 100 mA/cm2, respectively, ascribed to the favorable electronic structural modification triggered by nitrogen incorporation. The N,CuO@CuS also exhibits excellent endurance under varied current rates and a static potential response over 25 h with stability measured at 10 and 100 mA/cm2. [ABSTRACT FROM AUTHOR]

While formamidinium lead iodide (FAPbI3) halide perovskite (HP) exhibits improved thermal stability and a wide band gap, its practical applicability is chained due to its room temperature phase transition from pure black (α-phase) to a non-perovskite yellow (δ-phase) when exposed to humidity. This phase transition is due to the fragile ionic bonding between the cationic and anionic parts of HPs during their formation. Herein, we report the synthesis of water-stable, red-light-emitting α-phase FAPbI3 nanocrystals (NCs) using five different amines to overcome these intrinsic phase instabilities. The structural, morphological, and electronic characterization were obtained using X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), and X-ray photoelectron spectroscopy (XPS), respectively. The photoluminescence (PL) emission and single-particle imaging bear the signature of dual emission in several amines, indicating a self-trapped excited state. Our simple strategy to stabilize the α-phase using various amine interfacial interactions could provide a better understanding and pave the way for a novel approach for the stabilization of perovskites for prolonged durations and their multifunctional applications. [ABSTRACT FROM AUTHOR]