Search

With recent outbreaks of foot‐and‐mouth disease (FMD) in Indonesia and Bali, industry, government and public concern for its incursion into Australia is increasing. The potential impact of an outbreak on the agricultural industry and national economy could be devastating. To date, research conducted in relation to FMD in Australia predominantly concerns simulations and models performed to predict various outcomes. This project critically appraises the current literature regarding the simulated use of vaccination and its effectiveness for controlling the spread of FMD in Australia in the event of an outbreak. Findings from 10 modelling studies suggest that vaccination is effective at controlling the size and duration of an outbreak (under certain conditions), however, there is less clarity about cost‐effectiveness. [ABSTRACT FROM AUTHOR]

Aim: Infiltration experiments aimed to show the effectivity of coral sand to remove micro‐organisms in septic tank wastewater treatment system, in South Tarawa, Kiribati. Methods and Results: Laboratory experiments evaluated effective microbial removal properties of a packed bed of coral beach sand conditioned with domestic effluent. Bacterial and viral indicators Escherichia coli J6‐2, Enterococci faecalis and f‐RNA (MS2) bacteriophage, along with viral pathogens adenovirus, echovirus, norovirus and rotavirus, were dosed (at 106–107 CFU, PFU or genome copies per ml concentration) with effluent to unsaturated coral sand‐packed columns. For the conditions simulated, all organisms showed removal efficiencies of >4‐Log Removal Values (LRVs) (i.e. >99·99% effective reduction in number). Results revealed that the conditioned coral sand had a higher affinity for attenuating viruses than the bacteria tested. MS2 phage, adenovirus, echovirus, norovirus and rotavirus were absent in leachate from the base of the sand columns. E. coli J6‐2 and E. faecalis were recovered at 100–101 CFU (colony forming units) per ml in the column effluent, following a dosage of 106 CFU per ml. Destructive sampling of the columns after experiments revealed that a high proportion of viral pathogens were retained in the top 30 mm of the sand. Conclusions: On the basis of the relative spatial distribution of trace organisms in the sand, we speculate that adsorption processes likely dominated attenuation of the viral pathogens, more so than physical straining effects. Further study is required to fully elucidate the removal mechanisms. Significance and Impact of the Study: To the best of our knowledge this is the first study of the effective microbial removal capacity of coral sand under unsaturated conditions. The work represents an initial exploratory step of developing some standardized design practice of on‐site wastewater treatment systems in Kiribati, to offer enhanced protection of groundwater resources and reduce diarrhoeal disease. [ABSTRACT FROM AUTHOR]

The purpose of this study was to compare the peak force and force curve characteristics during a traditional bench press (BP) and a ballistic bench throw (BT). Eight (age = 21.0 +/- 2.3 years, height = 182.3 +/- 7.4 cm, body mass = 85.9 +/- 5.5 kg) semi-professional rugby league players with resistance and power training experience performed both BP and BT exercises at loads of 55 and 80% of their predicted one-repetition maximum. The force curves for each test were then divided into three intensity levels, set at low to moderate (0-75%), high (75-95%), and near-maximal force (95-100%). These values were obtained by determining the percentage of the range of motion (ROM) in which the force produced during each test was within these thresholds. The BT exercise produced significantly (p < 0.05) higher peak force than BP under both loading conditions. A significantly greater portion of the ROM during the 80% BT was at a high intensity in comparison with the BP. No significant differences were found between force intensity conditions at 55% loads. It can be concluded that performing the BT exercise results in a greater peak force output when compared with the traditional BP movement under both resistance training and maximal power loading conditions. Furthermore, performing the BT exercise with heavy loads results in a more efficient training method for maintaining high force levels throughout the ROM. [ABSTRACT FROM AUTHOR]

Variable range of motion (ROM) training consists of partial ROM resistance training with the countermovement being performed at a different phase of the movement for each set. In this study, we assessed the effect of this method of training on peak force, load lifted, and concentric work performed. Six male subjects with resistance training backgrounds (age 20.2 +/- 1.3 years, height 179.4 +/- 4.6 cm, weight 89.6 +/- 9.9 kg, 6-repetition maximum [6RM] bench press 92.5 +/- 14.3 kg) participated in this study. Testing consisted of 6RM bench press strength tests during full (FULL), three quarter ((3/4)), one half ((1/2)), and one quarter ((1/4)) ROM from full elbow extension bench press performed on a Smith machine. The 6RM load, peak force (PF), and concentric work (W) performed during each ROM was examined using a one-way analysis of variance performed at an alpha level of p < 0.05. The 6RM load increased significantly as the ROM was decreased for all tests (FULL = 92.5 +/- 14.3 kg, (3/4) = 102.1 +/- 14.3 kg, (1/2) = 123.3 +/- 23.6 kg, (1/4) = 160.9 +/- 26.2 kg). PF during each test was significantly higher during the (1/4) (1924.8 +/- 557.9 N) and (1/2) (1859.4 +/- 317.1 N) ROM from full elbow extension bench press when compared with the (3/4) (1242.2 +/- 254.6 N) and FULL (1200.5 +/- 252.5 N) ROM exercise. Although higher force levels were evident, the restriction in barbell displacement resulted in a subsequent reduction in W as the lifting ROM was reduced. These results suggest that variable ROM resistance training results in increased force production as the ROM diminishes. [ABSTRACT FROM AUTHOR]

Effects of a 10-week progressive strength training program composed of a mixture of exercises for increasing muscle mass, maximal peak force, and explosive strength (rapid force production) were examined in 8 young (YM) (29+/-5 yrs) and 10 old (OM) (61+/-4 yrs) men. Electromyographic activity, maximal bilateral isometric peak force, and maximal rate of force development (RFD) of the knee extensors, muscle cross-sectional area (CSA) of the quadriceps femoris (QF), muscle fiber proportion, and fiber areas of types I, IIa, IIb, and IIab of the vastus lateralis were evaluated. Maximal and explosive strength values remained unaltered in both groups during a 3-week control period with no training preceding the strength training. After the 10-week training period, maximal isometric peak force increased from 1311+/-123 N by 15.6% (p <.05) in YM and from 976+/-168 N by 16.5% (p <.01) in OM. The pretraining RFD values of 4049+/-791 N*s(-1) in YM and 2526+/-1197 N*s(-1) in OM remained unaltered. Both groups showed significant increases (p < .05) in the averaged maximum IEMGs of the vastus muscles. The CSA of the QF increased from 90.3+/-7.9 cm2 in YM by 12.2% (p <.05) and from 74.7+/-7.8 cm2 in OM by 8.5% (p <.001). No changes occurred in the muscle fiber distribution of type I during the training, whereas the proportion of subtype IIab increased from 2% to 6% (p < .05) in YM and that of type IIb decreased in both YM from 25% to 16% (p < .01) and in OM from 15% to 6% (p < .05). The mean fiber area of type I increased after the 10-week training in YM (p < .001) and OM (p < .05) as well as that of type IIa in both YM (p < .01) and OM (p < .01). The individual percentage values for type I fibers were inversely correlated with the individual changes recorded during the training in the muscle CSA of the QF (r=-.56, p < .05). The present results suggest that both neural adaptations and the capacity of the skeletal muscle to undergo training-induced hypertrophy even in older people explain the gains observed in maximal force in older men, while rapid force production capacity recorded during the isometric knee extension action remained unaltered during the present mixed strength training program. [ABSTRACT FROM AUTHOR]

Reducing conditions are necessary for denitrification, thus the groundwater redox status can be used to identify subsurface zones where potentially significant nitrate reduction can occur. Groundwater chemistry in two contrasting regions of New Zealand was classified with respect to redox status and related to mappable factors, such as geology, topography and soil characteristics using discriminant analysis. Redox assignment was carried out for water sampled from 568 and 2223 wells in the Waikato and Canterbury regions, respectively. For the Waikato region 64% of wells sampled indicated oxic conditions in the water; 18% indicated reduced conditions and 18% had attributes indicating both reducing and oxic conditions termed “mixed”. In Canterbury 84% of wells indicated oxic conditions; 10% were mixed; and only 5% indicated reduced conditions. The analysis was performed over three different well depths, < 25 m, 25 to 100 and > 100 m. For both regions, the percentage of oxidised groundwater decreased with increasing well depth. Linear discriminant analysis was used to develop models to differentiate between the three redox states. Models were derived for each depth and region using 67% of the data, and then subsequently validated on the remaining 33%. The average agreement between predicted and measured redox status was 63% and 70% for the Waikato and Canterbury regions, respectively. The models were incorporated into GIS and the prediction of redox status was extended over the whole region, excluding mountainous land. This knowledge improves spatial prediction of reduced groundwater zones, and therefore, when combined with groundwater flow paths, improves estimates of denitrification. [ABSTRACT FROM AUTHOR]