Search

Rosemary M Hall, Amber Parry Strong, Jeremy D KrebsCentre for Endocrine, Diabetes and Obesity Research, Capital and Coast District Health Board, Wellington, New Zealand Abstract: Dietary strategies are fundamental in the management of diabetes. Historically, strict dietary control with a low carbohydrate diet was the only treatment option. With increasingly effective medications, the importance of dietary change decreased. Recommendations focused on reducing dietary fat to prevent atherosclerotic disease, with decreasing emphasis on the amount and quality of carbohydrate. As the prevalence of obesity and diabetes escalates, attention has returned to the macronutrient composition of the diet. Very low carbohydrate diets (VLCD's) have demonstrated effective initial weight loss and improvement in glycemic control, but difficult long-term acceptability and worsening lipid profile. Modifications to the very low carbohydrate (VLC) have included limiting saturated fat and increasing carbohydrate (CHO) and protein. Reducing saturated fat appears pivotal in reducing low-density lipoprotein (LDL) cholesterol and may mitigate adverse effects of traditional VLCD's. Increased dietary protein enhances satiety, reduces energy intake, and improves glycemic homeostasis, but without sustained improvements in glycemic control or cardiovascular risk over and above the effect of weight loss. Additionally, recent studies in type 1 diabetes mellitus suggest promising benefits to diabetes control with low carbohydrate diets, without concerning effects on ketosis or hypoglycemia. Dietary patterns may highlight pertinent associations. For example, Mediterranean-style and paleolithic-type diets, low in fat and carbohydrate, are associated with reduced body weight and improved glycemic and cardiovascular outcomes in type 2 diabetes mellitus (T2DM). A feature of these dietary patterns is low refined CHO and sugar and higher fiber, and it is possible that increasing sugar consumption is having a substantial effect on global escalations in obesity and T2DM. Dietary recommendations in type 1 diabetes and T2DM are changing. Dietary CHO is unquestionably important, but long-term acceptability of any diet is critical to sustain improvements in health benefits. Personalized dietary management, using a variety of dietary approaches, may be the key to optimal diabetes outcomes. Keywords: low carbohydrate diets, type 2 diabetes, dietary intervention studies, type 1 diabetes, paleo nutrition

The current wear-testing standard (ISO18192-1) for total disc replacement (TDR) requires only four degrees of freedom (DOF) inputs: axial load, flexion-extension, lateral bending and axial rotation. The study aim was to assess the effect of an additional DOF, anterior-posterior (AP) shear on the wear of the ProDisc-L TDR. A 5DOF simulator was used to test ProDisc-L implants under 4DOF and 5DOF conditions. The 4DOF conditions were defined by ISO18192-1 whilst the 5DOF used ISO18192-1 conditions with the addition of an AP load of +175 and -140 N (anterior and posterior, respectively), extrapolated from in vivo data. The implants were mounted such that the polyethylene insert could be removed for gravimetric measurements. Tests were run using bovine serum (15 g/l protein concentration) as a lubricant for five million cycles (MC), with measurements repeated every 1 MC. The mean wear rate in the 4DOF test was 12.7 +/- 2.1 mg/MC compared to 11.6 +/- 1.2 mg/MC in the 5DOF test. There were marked differences in the wear scars between 4DOF and 5DOF simulations. With 4DOF, wear scars were centralised on the dome of the insert, whilst 5DOF scars were larger, breaching the anterior rim of the dome causing deformation at the edge. The 4DOF wear test showed similar gravimetric wear rates to previously published ISO-tested TDRs. The addition of AP load was found to have no significant effect on the overall wear rate. However, there were pronounced differences in the respective wear scars, which highlights the need for more research in order to understand the factors that influence wear of TDR. [ABSTRACT FROM AUTHOR]

Total disc replacements (TDRs) in the spine have been clinically successful in the short term, but there are concerns over long-term failure due to wear, as seen in other joint replacements. Simulators have been used to investigate the wear of TDRs, but only gravimetric measurements have been used to assess material loss. Micro computer tomography (microCT) has been used for volumetric measurement of explanted components but has yet to be used for in-vitro studies with the wear typically less than < 20 mm3 per 10(6) cycles. The aim of this study was to compare microCT volume measurements with gravimetric measurements and to assess whether microCT can quantify wear volumes of in-vitro tested TDRs. microCT measurements of TDR polyethylene cores were undertaken and the results compared with gravimetric assessments. The effects of repositioning, integration time, and scan resolution were investigated. The best volume measurement resolution was found to be +/- 3 mm3, at least three orders of magnitude greater than those determined for gravimetric measurements. In conclusion, the microCT measurement technique is suitable for quantifying in-vitro TDR polyethylene wear volumes and can provide qualitative data (e.g. wear location), and also further quantitative data (e.g. height loss), assisting comparisons with in-vivo and ex-vivo data. It is best used alongside gravimetric measurements to maintain the high level of precision that these measurements provide. [ABSTRACT FROM AUTHOR]

The aim of this study was to determine the accuracy of specimen-specific finite element models of untreated and cement-augmented vertebrae by direct comparison with experimental results. Eleven single cadaveric vertebrae were imaged using micro computed tomography (microCT) and tested to failure in axial compression in the laboratory. Four of the specimens were first augmented with PMMA cement to simulate a prophylactic vertebroplasty. Specimen-specific finite element models were then generated using semi-automated methods. An initial set of three untreated models was used to determine the optimum conversion factors from the image data to the bone material properties. Using these factors, the predicted stiffness and strength were determined for the remaining specimens (four untreated, four augmented). The model predictions were compared with the corresponding experimental data. Good agreement was found with the non-augmented specimens in terms of stiffness (root-mean-square (r.m.s.) error 12.9 per cent) and strength (r.m.s. error 14.4 per cent). With the augmented specimens, the models consistently overestimated both stiffness and strength (r.m.s. errors 65 and 68 per cent). The results indicate that this method has the potential to provide accurate predictions of vertebral behaviour prior to augmentation. However, modelling the augmented bone with bulk material properties is inadequate, and more detailed modelling of the cement region is required to capture the bone-cement interactions if the models are to be used to predict the behaviour following vertebroplasty. [ABSTRACT FROM AUTHOR]

The paper provides a basic introduction to the biomechanics of the hip, knee and spine with respect to the healthy joint and following joint replacement. The content is aimed specifically at persons with a medical background to introduce them to the concepts of forces and moments in application to the human body. [ABSTRACT FROM AUTHOR]