Search

A computationally proficient real-time energy management method with stochastic optimization is presented for a residential photovoltaic (PV)-storage hybrid system comprised of a solar PV generation and a battery energy storage (BES). Existing offline energy management approaches for day-ahead scheduling of BES suffer from energy loss in real time due to the stochastic nature of load and solar generation. On the other hand, typical online algorithms do not offer optimal solutions for minimizing electricity purchase costs to the owners. To overcome these limitations, we propose an integrated energy management framework consisting of an offline optimization model concurrent with a real-time rule-based controller. The optimization is performed in receding horizon with load and solar generation forecast profiles using deep learning-based long short term memory method in rolling horizon to reduce the daily electricity purchase costs. The optimization model is formulated as a multistage stochastic program where we use the stochastic dual dynamic programming algorithm in the receding horizon to update the optimal set point for BES dispatch at a fixed interval. To prevent loss of energy during optimal solution update intervals, we introduce a rule-based controller underneath the optimization layer in finer time resolution at the power electronics converter control level. The proposed framework is evaluated using a real-time controller-hardware-in-the-loop test platform in an OPAL-RT simulator. The proposed real-time method is effective in reducing the net electricity purchase cost compared to other existing energy management methods. [ABSTRACT FROM AUTHOR]

Energy storage deployment in residential and commercial applications is an attractive proposition for ensuring proper utilization of solar photovoltaic (PV) power generation. Energy storage can be controlled and coordinated with PV generation to satisfy electricity demand and minimize electricity purchases from the grid. For optimal energy management, PV generation and load demand uncertainties need to be considered when designing a control method for the PV-based storage system. Another resource available at the residential level is the plug-in electric vehicle (PEV) which also has bi-directional power flow capability. The charging and discharging routines of the PEV can be controlled to help reduce the energy drawn from the power grid during peak hours. In this paper, a method of coordinated optimal control between PV-based storage and PEV storage is proposed considering the stochastic nature of solar PV generation and load demand. The stochastic dual dynamic programming algorithm is employed to optimize the charge/discharge profiles of PV-based storage and PEV storage to minimize the daily household electricity purchase cost from the grid. Simulation analysis shows the advantage of the coordinated control compared to other control strategies. [ABSTRACT FROM AUTHOR]

The increased frequency of power outages due to natural disasters in recent years has highlighted the urgency of enhancing distribution grid resilience. The effective distribution service restoration (DSR) is an important measure for a resilient distribution grid. In this work, the authors demonstrate that DSR can be significantly improved by leveraging the flexibility provided by the inclusion of demand response (DR). The authors propose a framework for this by considering integrated control of household‐level flexible appliances to vary the load demand at the distribution‐grid level to improve DSR. The overall framework of the proposed system is modelled as a three‐step method considering three optimization problems to (i) calculate feasible controllable aggregated load range for each bus, (ii) determine candidate buses to perform DR and their target load demand, and (iii) maintain the load level in each house through home energy management during the DSR, considering uncertainties in load and solar generation sequentially. The optimization problems are formulated as linear programming, mixed‐integer linear programming, and multistage stochastic programming (solved using the stochastic dual dynamic programming) models. Case studies performed in the IEEE 123‐node test feeder show improvements in resilience in terms of energy restored compared to the restoration process without DR. [ABSTRACT FROM AUTHOR]

A modeling framework integrating both building energy modeling and power system modeling is introduced for the design of net zero energy (NZE) districts for the simultaneous selection of both demand-side efficiency measures and supply-side generation technologies. A novel district control scheme is proposed for pursuing NZE on a subhourly basis while mitigating potential grid impacts such as power backfeeding and voltage violations. As a case study, Peña Station NEXT, a new 100-building, mixed-use district on a 1200-node distribution feeder in Denver, Colorado, is modeled in the integrated framework. An exhaustive scenario analysis is conducted for sizing the district's distributed energy resources, considering multiple objectives such as capital cost, net energy import, and equipment violations. When trying to achieve annual NZE, the district incurs frequent operating violations, and achieving NZE on a 15-min basis is also limited by seasonal fluctuations in photovoltaic output, illustrating the need for diverse generation or seasonal storage. As a practical compromise, both annual and 15-min district import can be reduced by ∼78% without significant violations. [ABSTRACT FROM AUTHOR]

Recent efforts to reduce energy consumption and greenhouse gas emissions have resulted in the development of sustainable, smart districts with highly energy efficient buildings, renewable distributed energy resources (DERs), and support for alternative modes of transportation. However, there is typically little if any coordination between the district developers and the local utility. Most attention is paid to the district's annual net load and generation without considering their instantaneous imbalance or the connecting network's state. This presents an opportunity to learn lessons from the design of distribution feeders for districts characterized by low loads and high penetrations of DERs that can be applied to the distribution grid at large. The aim of this overview is to summarize current practices in sustainable district planning as well as advances in modeling and design tools for incorporating the power distribution system into the district planning process. Recent developments in the modeling and optimization of district power systems, including their coordination with multi‐energy systems and the impact of high penetration levels of renewable energy, are introduced. Sustainable districts in England and Japan are reviewed as case studies to illustrate the extent to which distribution system planning has been considered in practice. Finally, newly developed building‐to‐grid modeling tools that can facilitate coordinated district and power system design with utility involvement are introduced, along with suggestions for future research directions. This article is categorized under:Wind Power > Systems and InfrastructureEnergy Policy and Planning > Systems and InfrastructureEnergy Efficiency > Systems and Infrastructure [ABSTRACT FROM AUTHOR]