Search

Biofouling on marine surfaces causes immense material and financial harm for maritime vessels and related marine industries. Previous reports have shown the effectiveness of amphiphilic coating systems based on poly(dimethylsiloxane) (PDMS) against such marine foulers. Recent studies on biofouling mechanisms have also demonstrated acidic microenvironments in biofilms and stronger adhesion at low-pH conditions. This report presents the design and utilization of amphiphilic polymer coatings with buffer functionalities as an active disruptor against four different marine foulers. Specifically, this study explores both neutral and zwitterionic buffer systems for marine coatings, offering insights into coating design. Overall, these buffer systems were found to improve foulant removal, and unexpectedly were the most effective against the diatom Navicula incerta. [ABSTRACT FROM AUTHOR]

In this work, two structurally different monoamines (trimethylamine [TMA] and N‐methylpiperidine [N‐MPip]) are used for the amination of a g‐VBC‐15 graft copolymer, obtained by the functionalization of a mechanically robust, commercially available styrene–butadiene block copolymer (SB) with vinylbenzyl chloride (VBC) via solution free‐radical polymerization. Results demonstrate that g‐VBC‐15‐based membranes quaternized with TMA have superior electrochemical performance than N‐MPip counterparts; while, the mechanical properties are good and only slightly inferior to those of N‐MPip. Therefore, TMA is the selected monoamine to be alternatively mixed with two polyamines (tetramethyl‐1,3‐propanediamine [TMPDA] and N,N,N',N",N"‐pentamethyldiethylenetriamine [PMDETA]) into different proportions, in order to modulate the average functionality of the amination mixture in terms of number of amine functional groups available for the quaternization reaction of the membranes. g‐VBC‐15‐based membranes derived therefrom are extensively characterized to assess their thermal, mechanical, and ex situ electrochemical properties. Results indicate that membranes quaternized with a TMA/PMDETA mixture (90:10 in mole) display the highest conductivity among all the investigated membranes aminated with polyamine‐based mixtures. Moreover, they have comparable mechanical and electrochemical properties to those quaternized with TMA, while exhibiting a reduced water uptake. [ABSTRACT FROM AUTHOR]

In this work, a commercially available styrene‐butadiene block copolymer is functionalized with vinyl benzyl chloride (VBC) via solution free‐radical polymerization to obtain g‐VBC‐x graft copolymers. The molar content of VBC, also named functionalization degree (FD) or x, of g‐VBC‐x is varied in the range 10–27 mol%, simply by varying the concentration of VBC monomer in the feed or the reaction time. The g‐VBC‐x copolymers are used to prepare films by solution casting that are converted into anionic exchange membranes (AEMs) by heterogeneous quaternization reaction with trimethylamine (TMA). The membranes are extensively characterized to assess their thermal, mechanical, and ex‐situ electrochemical properties. The best performing AEMs having an FD of 20% and 27% are tested in an AEM single‐cell electrolyzer. Both of them are found to retain their original conductivity after more than 40 and 100 days, respectively. In particular, the membrane with the higher FD is characterized by the best in‐situ performance both in terms of ionic conductivity and cell potential. [ABSTRACT FROM AUTHOR]

Amphiphilic photopolymerized network films are prepared, based on a hexyl acrylate (HA) hydrophobic matrix containing varied amounts of urethane dimethacrylates bearing a hydrophilic poly(ethylene glycol) segment and terminated with hydrophobic, low surface energy groups, i.e., a short perfluorohexyl chain (for EF) or a fluorine‐free heptamethyltrisiloxane group (for ES). These films are extensively characterized in bulk and at the surface by thermal, mechanical, solvent and water uptake, contact angle, and X‐ray photoelectron spectroscopy measurements. On one hand, surface characterizations reveal that the amphiphilic chains of the additives enrich the topmost layer of the films, thus generating a water‐responsive surface. The reconstruction process is found to be faster for the perfluorinated additive EF and slower for the fluorine‐free ES ones. On the other hand, HA provides a hydrophobic matrix with low elastic modulus, dimensional stability, and adhesion to the substrates even after the absorption of water after prolonged immersion. A field immersion trial carried out in a touristic harbor in Leghorn points out that the films, although being ineffective in preventing organism settlement, are easily cleaned by a water jet after three months of immersion, showing a final residual coverage of panels as low as 15%. [ABSTRACT FROM AUTHOR]

The unique self-assembly properties of unimer micelles are exploited for the preparation of fluorescent nanocarriers embedding hydrophobic fluorophores. Unimer micelles are constituted by a (meth)-acrylate copolymer with oligoethyleneglycol and perflurohexylethyl side chains (PEGMA90-co-FA10) in which the hydrophilic and hydrophobic comonomers are statistically distributed along the polymeric backbone. Thanks to hydrophobic interactions in water, the amphiphilic copolymer forms small nanoparticles (<10 nm), with tunable properties and functionality. An easy procedure for the encapsulation of a small hydrophobic molecule (C153 fluorophore) within unimer micelles is presented. UV–vis, fluorescence, and fluorescence anisotropy spectroscopic experimental data demonstrate that the fluorophore is effectively embedded in the nanocarriers. Moreover, the nanocarrier positively contributes to preserve the good emissive properties of the fluorophore in water. The efficacy of the dye-loaded nanocarrier as a fluorescent probe is tested in two-photon imaging of thick ex vivo porcine scleral tissue. [ABSTRACT FROM AUTHOR]

Amphiphilic copolymer self-assembly is a straightforward approach to obtain responsive micelles, nanoparticles, and vesicles that are particularly attractive for biomedicine, i.e., for the delivery of functional molecules. Here, amphiphilic copolymers of hydrophobic polysiloxane methacrylate and hydrophilic oligo (ethylene glycol) methyl ether methacrylate with different lengths of oxyethylenic side chains were synthesized via controlled RAFT radical polymerization and characterized both thermally and in solution. In particular, the thermoresponsive and self-assembling behavior of the water-soluble copolymers in water was investigated via complementary techniques such as light transmittance, dynamic light scattering (DLS), and small-angle X-ray scattering (SAXS) measurements. All the copolymers synthesized were thermoresponsive, displaying a cloud point temperature (Tcp) strongly dependent on macromolecular parameters such as the length of the oligo(ethylene glycol) side chains and the content of the SiMA counits, as well as the concentration of the copolymer in water, which is consistent with a lower critical solution temperature (LCST)-type behavior. SAXS analysis revealed that the copolymers formed nanostructures in water below Tcp, whose dimension and shape depended on the content of the hydrophobic components in the copolymer. The hydrodynamic diameter (Dh) determined by DLS increased with the amount of SiMA and the associated morphology at higher SiMA contents was found to be pearl-necklace-micelle-like, composed of connected hydrophobic cores. These novel amphiphilic copolymers were able to modulate thermoresponsiveness in water in a wide range of temperatures, including the physiological temperature, as well as the dimension and shape of their nanostructured assemblies, simply by varying their chemical composition and the length of the hydrophilic side chains. [ABSTRACT FROM AUTHOR]

In this work, a commercial SBS was functionalized with the 2,2,6,6-tetramethylpiperidin-N-oxyl stable radical (TEMPO) via free-radical activation initiated with benzoyl peroxide (BPO). The obtained macroinitiator was used to graft both vinylbenzyl chloride (VBC) and styrene/VBC random copolymer chains from SBS to create g-VBC-x and g-VBC-x-co-Sty-z graft copolymers, respectively. The controlled nature of the polymerization as well as the use of a solvent allowed us to reduce the extent of the formation of the unwanted, non-grafted (co)polymer, thereby facilitating the graft copolymer's purification. The obtained graft copolymers were used to prepare films via solution casting using chloroform. The –CH2Cl functional groups of the VBC grafts were then quantitatively converted to –CH2(CH3)3N+ quaternary ammonium groups via reaction with trimethylamine directly on the films, and the films, therefore, were investigated as anion exchange membranes (AEMs) for potential application in a water electrolyzer (WE). The membranes were extensively characterized to assess their thermal, mechanical, and ex situ electrochemical properties. They generally presented ionic conductivity comparable to or higher than that of a commercial benchmark as well as higher water uptake and hydrogen permeability. Interestingly, the styrene/VBC-grafted copolymer was found to be more mechanically resistant than the corresponding graft copolymer not containing the styrene component. For this reason, the copolymer g-VBC-5-co-Sty-16-Q with the best balance of mechanical, water uptake, and electrochemical properties was selected for a single-cell test in an AEM-WE. [ABSTRACT FROM AUTHOR]

Amphiphilic fluorinated copolymers PEGMAx‐co‐FAy and TEGMAx‐co‐FAy are prepared by activators regenerated by electron transfer atom transfer radical polymerization (ARGET‐ATRP). All polymers present a reversible thermoresponsive lower critical solution temperature‐type behavior, and a cloud point temperature (Tc) in the range of 30–60 °C strictly dependent on the length of the oxyethylene side chain, the content of the hydrophobic counits, and the concentration of the solution. Combined small angle X‐ray scattering (SAXS) and dynamic light scattering measurements are used to study the self‐assembly behavior in water, organic solvents (tetrahydrofuran [THF] and dimethylformamide [DMF]), and a fluorinated solvent (hexafluorobenzene [HFB]). SAXS confirms the formation of compact‐globular single‐chain self‐folded unimer micelles in water below Tc, which generally presents small hydrodynamic diameters (Dh ≤ 8 nm) as a result of the folding of the hydrophobic perfluorohexylethyl acrylate counits. The copolymers are also able to form reverse unimer micelle in HFB. The copolymers are not able to self‐assemble in unimer micelles in THF or DMF solutions, in which they adopt conventional random coil conformations. [ABSTRACT FROM AUTHOR]

Hydrolyzable block copolymers consisting of a polyethylene glycol (PEG) first block and a random poly(trialkylsilyl methacrylate (TRSiMA, R = butyl, isopropyl)-co-methyl methacrylate (MMA)) second block were synthesized by RAFT polymerization. Two PEGs with different molar masses (Mn = 750 g/mol (PEG1) and 2200 g/mol (PEG2)) were used as macro-chain transfer agents and the polymerization conditions were set in order to obtain copolymers with a comparable mole content of trialkylsilyl methacrylate (~30 mole%) and two different PEG mole percentages of 10 and 30 mole%. The hydrolysis rates of PEG-b-(TRSiMA-co-MMA) in a THF/basic (pH = 10) water solution were shown to drastically depend on the nature of the trialkylsilyl groups and the mole content of the PEG block. Films of selected copolymers were also found to undergo hydrolysis in artificial seawater (ASW), with tunable erosion kinetics that were modulated by varying the copolymer design. Measurements of the advancing and receding contact angles of water as a function of the immersion time in the ASW confirmed the ability of the copolymer film surfaces to respond to the water environment as a result of two different mechanisms: (i) the hydrolysis of the silylester groups that prevailed in TBSiMA-based copolymers; and (ii) a major surface exposure of hydrophilic PEG chains that was predominant for TPSiMA-based copolymers. AFM analysis revealed that the surface nano-roughness increased upon immersion in ASW. The erosion of copolymer film surfaces resulted in a self-polishing, antifouling behavior against the diatom Navicula salinicola. The amount of settled diatoms depended on the hydrolysis rate of the copolymers. [ABSTRACT FROM AUTHOR]

Featured Application: The combined use of light scattering, turbidimetry, and differential scanning calorimetry highlighted the thermoresponsive self-assembling behavior in water of the oligo(ethylene glycol)-modified pentafluorostyrene homopolymers. The potential applications of such novel smart materials are open to study in advanced fields, including nano-medicine, nano-catalysis and bottom-up nanotechnology at large. Amphiphilic tetrafluorostyrene monomers (EFS8) carrying in the para position an oligoethylene glycol chain containing 8 oxyethylenic units on average were synthesized and used for preparation via activator regenerated by electron transfer atom transfer radical polymerization (ARGET-ATRP) of the corresponding amphiphilic homopolymers (pEFS8-x) with different degrees of polymerization (x = 26 and 46). Combining light transmittance and nano-differential scanning calorimetry (n-DSC) measurements revealed that pEFS8-x homopolymers displayed a lower critical solution temperature (LCST) thermoresponsive behavior in water solutions. Moreover, n-DSC measurements revealed the presence in heating scans of a broad endothermic peak ascribable to the dehydration process of the polymer single chains (unimers) and their collapse into aggregates. Consistently, dynamic light scattering (DLS) measurements showed below the LCST the presence of small nanostructures with a hydrodynamic diameter size Dh of 6–7 nm, which collapsed into concentration-dependent larger multichain aggregates (Dh = 300–3000 nm) above LCST. Interestingly, n-DSC data showed that the unimer-aggregate transition was reversible up to a specific temperature (Trev) of each homopolymer, which in any case was higher than Tmax. When heating above Trev the transition was no longer reversible, causing the shift of Tonset and Tmax at lower values, thus suggesting an increase in hydrophobicity of the polymer systems associated with a temperature-dependent dehydration process. [ABSTRACT FROM AUTHOR]

The self‐assembly behavior, in aqueous solution, of amphiphilic methacrylic random copolymers with perfluoroalkyl and polyoxyethylene side chains and the morphology of the resulting nanostructures are investigated by small‐angle neutron scattering (SANS). The results allow to clarify the effect of temperature on the self‐assembly features of copolymers and the structural morphology of both unimer single‐chain entities and larger multi‐chain aggregates of unimers. Shape, flexibility, and size of the aggregates are proved to be modulated by temperature and copolymer composition. The existence of three distinct phases of self‐assembled structures is pointed out as a function of increasing temperature: 1) globular unimers; 2) coexistence of extended unimers and aggregates; and 3) aggregates, which overall show full reversibility in a wide range of copolymer concentrations. [ABSTRACT FROM AUTHOR]

Amphiphilic methacrylate copolymers (Si-co-EF) containing polysiloxane (Si) and mixed poly(oxyethylene)–perfluorohexyl (EF) side chains were synthesized with different compositions and used together with polysiloxane-functionalized nanoparticles as additives of condensation cured nanocomposite poly(siloxane) films. The mechanical properties of the nanocomposite films were consistent with the elastomeric behavior of the poly(siloxane) matrix without significant detriment from either the copolymer or the nanoparticles. Films were found to be markedly hydrophobic and liphophobic, with both properties being maximized at an intermediate content of EF units. The high enrichment in fluorine at the film surface was proven by angle-resolved X-ray photoelectron spectroscopy (AR-XPS). Long-term marine antifouling performance was evaluated in field immersion trials of test panels for up to 10 months of immersion. Both nanoparticles and amphiphilic copolymer were found to be highly effective in reducing the colonization of foulants, especially hard macrofoulants, when compared with control panels. Lowest percentage of surface coverage was 20% after 10 months of immersion (films with 4 wt% copolymer and 0.5 wt% nanoparticles), which was further decreased to less than 10% after exposure to a water jet for 10 s. The enhanced antifouling properties of coatings containing both nanoparticles and copolymer were confirmed by laboratory assays against the polychaete Ficopomatus enigmaticus and the diatom Navicula salinicola. [ABSTRACT FROM AUTHOR]

Poly(dimethylsiloxane) (PDMS) elastomer coatings containing an amphiphilic hydrolyzable diblock copolymer additive were prepared and their potential as marine antifouling and antiadhesion materials was tested. The block copolymer additive consisted of a PDMS first block and a random poly(trialkylsilyl methacrylate (TRSiMA, R = butyl, isopropyl)-co-poly(ethyleneglycol) methacrylate (PEGMA) copolymer second block. PDMS-b-TRSiMA block copolymer additives without PEGMA units were also used as additives. The amphiphilic character of the coating surface was assessed in water using the captive air bubble technique for measurements of static and dynamic contact angles. The attachment of macro- and microorganisms on the coatings was evaluated by field tests and by performing adhesion tests to the barnacle Amphibalanus amphitrite and the green alga Ulva rigida. All the additive-based PDMS coatings showed better antiadhesion properties to A. amphitrite larvae than to U. rigida spores. Field tests provided meaningful information on the antifouling and fouling release activity of coatings over an immersion period of 23 months. [ABSTRACT FROM AUTHOR]

Abstract: Two amphiphilic random copolymers, PEGMAx‐co‐FAy (x = 90 and 70 mol%), are synthesized by ATRP and their solutions are investigated as a function of solvent, concentration, and temperature by DLS and SANS analyses. Both copolymers self‐assemble in nanostructures by single‐chain folding in water solutions over a wide range of temperatures. The values of the DLS hydrodynamic radius and the SANS radius of gyration are found to be ≈4 nm and ≈3.4–3.7 nm, respectively. Moreover, SANS shows the self‐folded nanoassemblies to be prolated spheroids with a ratio of polar/equatorial axes of ≈5:1 for PEGMA90‐co‐FA10 and ≈2:1 for PEGMA70‐co‐FA30. On heating above a critical temperature Tc, multichain microassemblies are formed that revert back to nanoassemblies on cooling below Tc. This temperature‐responsive transition is fully and sharply reversible. [ABSTRACT FROM AUTHOR]

Abstract: Novel amphiphilic random copolymers carrying poly(oxyethylene) and poly(siloxane) pendant chains are synthesized by atom transfer radical polymerization starting from either a fluorescent, julolidine‐based initiator, or a nonfluorescent initiator. For both copolymer systems, dynamic light scattering measurements carried out on aqueous solutions as a function of temperature reveal the occurrence of a sharp and fully reversible transition between two different self‐associative states of individual, single‐chain self‐folded nanoassemblies, so‐called unimer micelles, (Dh = 8–10 nm) and collapsed multichain aggregates (Dh = 700–1400 nm) at a critical temperature Tc. Covalently linked julolidine terminal and added ethidium bromide are separately used as fluorescent probes and both prove the temperature‐dependence of the different self‐association of the copolymers in water. [ABSTRACT FROM AUTHOR]

ABSTRACT: A novel fluorescent‐labeled amphiphilic random terpolymer is synthesized by controlled radical polymerization of a fluorescent molecular rotor monomer, 2‐cyano‐2‐[4‐vinyl(1,1′‐biphenyl)‐4′‐yl]vinyljulolidine, a hydrophilic monomer, poly (ethylene glycol) methyl ether methacrylate, and a hydrophobic monomer, perfluorohexylethyl acrylate. Combined dynamic light scattering and fluorescence emission spectroscopy measurements are used to investigate its self‐assembly in water solution. Self‐assembled nanostructures with a hydrodynamic diameter size Dh of 4 ± 1 nm are detected due to the single‐chain folding of the terpolymer in unimer micelles. The fluorescence emission intensity of the terpolymer in water solution is found to be one order of magnitude higher than that in organic solvents, as a result of the preferential encapsulation of the julolidine co‐units in hydrophobic compartments of the unimer micelles. The temperature dependence of the self‐associative behavior of the amphiphilic terpolymer is also investigated and a critical temperature is identified at which a transition between single‐chain unimer micelles and multi‐chain aggregates (Dh = 400 ± 40 nm) reversibly takes place on heating–cooling cycles. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018, 56, 797–804 [ABSTRACT FROM AUTHOR]

ABSTRACT Well-defined amphiphilic pentablock copolymers Si y-(EG x-FA z)2 composed of polysiloxane (Si), polyethylene glycol (EG), and perfluorohexylethyl polyacrylate (FA) blocks are synthesized by ATRP of FA monomer starting from a difunctional bromo-terminated macroinitiator. Diblock copolymers EG x-FA z are also synthesized as model systems. The block copolymers are used, either alone or blended with a PDMS matrix in varied loadings, to prepare antibiofouling coatings. Angle-resolved XPS and contact angle measurements show that the coating surface is highly enriched in fluorine content but undergoes reconstruction after contact with water. Protein adsorption experiments with human serum albumin and calf serum highlight that diblock copolymers resist protein adhesion better than do pentablock copolymers. Blending of the pentablock copolymer with PDMS results in increased protein adsorption. By contrast, the PDMS-matrix coatings show high removal percentages of sporelings of the green fouling alga Ulva linza. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015, 53, 1213-1225 [ABSTRACT FROM AUTHOR]

Water-soluble amphiphilic random copolymers composed of tri(ethylene glycol) methacrylate (TEGMA) or poly(ethylene glycol) methyl ether methacrylate (PEGMA) and perfluorohexylethyl acrylate (FA) were synthesized by ARGET-ATRP, and their self-assembling and thermoresponsive behavior in water was studied by dynamic light scattering (DLS) and UV-vis spectroscopy. The copolymer ability to self-fold in single-chain nano-sized structures (unimer micelles) in aqueous solutions was exploited to encapsulate Combretastatin A-4 (CA-4), which is a very hydrophobic anticancer drug. The cloud point temperature (Tcp) was found to linearly decrease with increasing drug concentration in the drug/copolymer system. Moreover, while CA-4 was preferentially incorporated into the unimer micelles of TEGMA-ran-FA, the drug was found to induce multi-chain, submicro-sized aggregation of PEGMA-ran-FA. Anyway, the encapsulation efficiency was very high (≥81%) for both copolymers. The drug release was evaluated in PBS aqueous solutions both below and above Tcp for TEGMA-ran-FA copolymer and below Tcp, but at two different drug loadings, for PEGMA-ran-FA copolymer. In any case, the release kinetics presented similar profiles, characterized by linear trends up to ≈10–13 h and ≈7 h for TEGMA-ran-FA and PEGMA-ran-FA, respectively. Then, the release rate decreased, reaching a plateau. The release from TEGMA-ran-FA was moderately faster above Tcp than below Tcp, suggesting that copolymer thermoresponsiveness increased the release rate, which occurred anyway by diffusion below Tcp. Cytotoxicity tests were carried out on copolymer solutions in a wide concentration range (5–60 mg/mL) at 37 °C by using Balb/3T3 clone A31 cells. Interestingly, it was found that the concentration-dependent micro-sized aggregation of the amphiphilic random copolymers above Tcp caused a sort of "cellular asphyxiation" with a loss of cell viability clearly visible for TEGMA-ran-FA solutions (Tcp below 37 °C) with higher copolymer concentrations. On the other hand, cells in contact with the analogous PEGMA-ran-FA (Tcp above 37 °C) presented a very good viability (≥75%) with respect to the control at any given concentration. [ABSTRACT FROM AUTHOR]

Poly(ethyl ethylene phosphonate)-based methacrylic copolymers containing polysiloxane methacrylate (SiMA) co-units are proposed as surface-active additives as alternative solutions to the more investigated polyzwitterionic and polyethylene glycol counterparts for the fabrication of novel PDMS-based coatings for marine antifouling applications. In particular, the same hydrophobic SiMA macromonomer was copolymerized with a methacrylate carrying a poly(ethyl ethylene phosphonate) (PEtEPMA), a phosphorylcholine (MPC), and a poly(ethylene glycol) (PEGMA) side chain to obtain non-water soluble copolymers with similar mole content of the different hydrophilic units. The hydrolysis of poly(ethyl ethylene phosphonate)-based polymers was also studied in conditions similar to those of the marine environment to investigate their potential as erodible films. Copolymers of the three classes were blended into a condensation cure PDMS matrix in two different loadings (10 and 20 wt%) to prepare the top-coat of three-layer films to be subjected to wettability analysis and bioassays with marine model organisms. Water contact angle measurements showed that all of the films underwent surface reconstruction upon prolonged immersion in water, becoming much more hydrophilic. Interestingly, the extent of surface modification appeared to be affected by the type of hydrophilic units, showing a tendency to increase according to the order PEGMA < MPC < PEtEPMA. Biological tests showed that Ficopomatus enigmaticus release was maximized on the most hydrophilic film containing 10 wt% of the PEtEP-based copolymer. Moreover, coatings with a 10 wt% loading of the copolymer performed better than those containing 20 wt% for the removal of both Ficopomatus and Navicula, independent from the copolymer nature. [ABSTRACT FROM AUTHOR]

Diblock copolymers composed of a polystyrene first block and a PEG-fluoroalkyl chain-modified polystyrene second block were synthesized by controlled atom transfer radical polymerization (ATRP), starting from the same polystyrene macroinitiator. The wettability of the polymer film surfaces was investigated by measurements of static and dynamic contact angles. An increase in advancing water contact angle was evident for all the films after immersion in water for short times (10 and 1000 s), consistent with an unusual contraphilic switch of the PEG-fluoroalkyl side chains. Such a contraphilic response also accounted for the retained wettability of the polymer films upon prolonged contact with water, without an anticipated increase in the hydrophilic character. The copolymers were then used as surface-active modifiers of elastomer poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS)-based two-layer films. The elastomeric behavior of the films was varied by using SEBS matrices with different amounts of polystyrene. Whereas the mechanical properties strictly resembled those of the nature of the SEBS matrix, the surface properties were imposed by the additive. The contraphilic switch of the PEG-fluoroalkyl side chains resulted in an exceptionally high enrichment in fluorine of the film surface after immersion in water for seven days. [ABSTRACT FROM AUTHOR]

Fluorinated (F6) and zwitterionic, as well as phosphorylcholine (MPC) and sulfobetaine (MSA), copolymers containing a low amount (1 and 5 mol%) of 3-(trimethoxysilyl)propyl methacrylate (PTMSi) were prepared and covalently grafted to glass slides by using the trimethoxysilyl groups as anchorage points. Glass-surface functionalization and polymer-film stability upon immersion in water were proven by contact angle and angle-resolved X-ray photoelectron spectroscopy (AR-XPS) measurements. Antifouling performance of the grafted films was assayed against the yeast Candida albicans, the most common Candida species, which causes over 80% of candidiasis. Results revealed that the F6 fluorinated, hydrophobic copolymers performed much better in reducing the adhesion of C. albicans, with respect to both corresponding zwitterionic, hydrophilic MPC and MSA counterparts, and were similar to the glass negative control, which is well-known to inhibit the adhesion of C. albicans. A composition-dependent activity was also found, with the films of copolymer with 99 mol% F6 fluorinated co-units performing best. [ABSTRACT FROM AUTHOR]

A set of amphiphilic random copolymers of poly(ethylene glycol) methacrylate (PEGMA) and perfluorohexylethyl acrylate (FA) with different compositions synthesized by atom transfer radical polymerization (ATRP) is investigated by 1H and 19F NMR relaxometry. In particular, a thorough investigation of T1 and T2 relaxation times at variable temperature and copolymer composition provides the first complete and detailed characterization of the dynamics of both the main chain backbone and the side chains of the PEGMA‐co‐FA copolymers. The results highlight an intramolecular segregation of rigid main chain and mobile side chains, and an additional self‐assembling of the PEGMA and FA side chains into distinct nanodomains, driven by the hydrophobic interactions between FA side chains. The obtainment and observation of nanoscale phase separation in random copolymers is a promising achievement to the aim of controlling self‐assembly in the bulk by suitably modulating copolymers composition, which can open novel avenues to easier fabrications and applications in nanotechnologies. [ABSTRACT FROM AUTHOR]

(Meth)acrylic terpolymers carrying siloxane (Si), fluoroalkyl (F) and ethoxylated (EG) side chains were synthesized with comparable molar compositions and different lengths of the Si and EG side chains, while the length of the fluorinated side chain was kept constant. Such terpolymers were used as surface-active modifiers of polydimethylsiloxane (PDMS)-based films with a loading of 4 wt%. The surface chemical compositions of both the films and the pristine terpolymers were determined by angle-resolved X-ray photoelectron spectroscopy (AR-XPS) at different photoemission angles. The terpolymer was effectively segregated to the polymer−air interface of the films independent of the length of the constituent side chains. However, the specific details of the film surface modification depended upon the chemical structure of the terpolymer itself. The exceptionally high enrichment in F chains at the surface caused the accumulation of EG chains at the surface as well. The response of the films to the water environment was also proven to strictly depend on the type of terpolymer contained. While terpolymers with shorter EG chains appeared not to be affected by immersion in water for seven days, those containing longer EG chains underwent a massive surface reconstruction. [ABSTRACT FROM AUTHOR]

Microplastic (MP) pollution represents a distinctive mark of the Anthropocene. Despite the increasing efforts to determine the ecological impacts of MP on marine biodiversity, our understanding of their toxicological effects on invertebrate species is still limited. Despite their key functional roles, sponges (Phylum Porifera) are particularly understudied in MP research. These filter-feeders extract and retain particles from the water column, across a broad size range. In this study, we carried out a laboratory experiment to assess the uptake of MPs (polyethylene, PE) by the Mediterranean sponge Petrosia ficiformis , how MPs influence key biological process after different times of exposure (24h and 72h) and whether they can be subsequently eliminated. MP uptake increased with time of exposure, with 30.6% of the inoculated MP particles found in sponge samples after 72h. MPs impaired filtration and respiration rates and these effects were still evident 72h after sponges had been transferred in uncontaminated water. Our study shows that time of exposure represents a key factor in determining MP toxicity in sponges. In addition, our results suggest that sponges are able to incorporate foreign particles and may thus be a potential bioindicator for MP pollutants. • Pristine polyethylene microplastics affect the physiology of Petrosia ficiformis. • Sponge responses are dependent upon the time of microplastic exposure. • 72h of depuration were not sufficient for the sponge to recover. • Sponges are able to incorporate foreign particles becoming potential bioindicator for MP pollutants. [ABSTRACT FROM AUTHOR]