Search

The reaction of diphenylphosphine oxide successively with two aryne precursors was investigated in order to access valuable functionalizable nonsymmetrical dibenzophospholes. The reactions proved sensitive to substituents of aryne precursors able to coordinate the incoming lithiated nucleophile. [ABSTRACT FROM AUTHOR]

2021 marked the 80th anniversary of Barbara McClintock's pioneering article on the breakage–fusion–bridge (BFB) cycle. Of the three steps of the BFB cycle, breakage remains the least understood despite its major contribution to mutagenesis. We discuss recent findings shedding light on how chromatin bridges break in yeast and animal cells. [ABSTRACT FROM AUTHOR]

Based on high‐resolution laboratory data of instantaneous surface elevation and fluid velocity associated with the propagation of short waves over a gently sloping beach (GLOBEX project), the present work compares two methods for predicting the wave setup. A one‐dimensional (cross‐shore) model is considered to solve the balance equation that links the pressure gradient induced by the mean surface elevation profile with the wave radiation stress (including wave roller) and bottom stress profiles. When compared to measurements and using a wave‐by‐wave approach, the mean elevation appears to be significantly better predicted with a nonlinear approach based on stream function theory than with the commonly used linear approach based on Airy wave theory. At the shoreline, the linear method overestimates the wave setup by at least about 50% while this error is globally reduced by a factor 2 to 4 in the nonlinear case. In the framework of this study, the combined contribution of bottom stress and wave roller to the wave setup appears secondary since it accounts for about 10% of the predicted setup at the shoreline. Alternative computational methods are also considered to model the wave setup. In the linear case, using a spectral instead of the wave‐by‐wave approach greatly improves the wave setup predictions. This improvement is related to the disparity between the representative wave height (and thus the wave energy) obtained from spectral and wave‐by‐wave analysis when short‐wave nonlinearity becomes significant. Plain Language Summary: The breaking of waves near the shore increases the mean sea level to a maximum at the shoreline. This so‐called wave setup is of fundamental importance in coastal dynamics, especially regarding flooding issues during storm events. Here, we use laboratory measurements of surface elevation and fluid velocity associated with waves propagating over a uniform beach to test the validity of wave setup predictions following two different approaches. The first one is based on the basic and common framework within which the waves are always represented by sinusoids, while the second one is based on a more elaborate and realistic representation of waves. We show that using the basic approach significantly overestimates the wave setup, while the more elaborate approach leads to more realistic predictions. Key Points: Laboratory data are used to assess the validity of wave setup predictions following linear and nonlinear approachesIn a wave‐by‐wave analysis wave setup predictions are greatly improved when accounting for short‐wave nonlinearityLinear wave setup predictions are improved using spectral instead of wave‐by‐wave approach due to a correct account of the wave energy [ABSTRACT FROM AUTHOR]

Owing to the high interest in the OCF3 group for pharmaceutical and agrochemical applications, trifluoromethoxylation received great attention in the last years with several new methods for this approach towards OCF3‐comprising compounds. Yet, it most often requires the beforehand preparation of specific F3CO− transfer reagents, which can be toxic, expensive, unstable, and/or generate undesired side‐products upon consumption. To circumvent this, the in‐situ generation of gaseous fluorophosgene from triphosgene, its conversion by fluoride into the OCF3 anion, and the direct use of the latter in nucleophilic substitutions is an appealing strategy, which, although recently approached, has not been fully exploited. We disclose herein our efforts towards this aim. [ABSTRACT FROM AUTHOR]

Semiflexible polymer rings whose bonds obey both angular and dihedral restrictions [M. Dolgushev and A. Blumen, J. Chem. Phys. 138, 204902 (2013)], are treated under exact closure constraints. This allows us to obtain semianalytic results for their dynamics, based on sets of Langevin equations. The dihedral restrictions clearly manifest themselves in the behavior of the mean-square monomer displacement. The determination of the equilibrium ring conformations shows that the dihedral constraints influence the ring curvature, leading to compact folded structures. The method for imposing such constraints in Gaussian systems is very general and it allows to account for heterogeneous (sitedependent) restrictions. We show it by considering rings in which one site differs from the others. [ABSTRACT FROM AUTHOR]

The synthesis of trifluoromethylthiolated ketenimines is herein described. They are easily synthesized from the corresponding α‐trifluoromethylthiolated oximes upon activation with triflic anhydride and a base. The presumed nitrilium ion resulting from the Beckmann rearrangement is deprotonated to lead to the key intermediate, whose stability brought by the fluorinated substituent was unforeseeable. The reaction of these new building blocks with a variety of nucleophiles affords a vast array of cyclic and acyclic products bearing the valuable SCF3 moiety. [ABSTRACT FROM AUTHOR]

This study presents unpublished field observations of infragravity waves, collected at the dissipative beach of Saint-Trojan (Oléron Island, France) during the storm Kurt (3 February 2017), characterized by incident short waves of significant heights reaching 9.5 m and peak periods reaching 22 s. Data analysis reveals the development of exceptionally large infragravity waves, with significant heights reaching 1.85 m close to shore. Field observations are complemented by numerical modeling with XBeach, which well reproduces the development of such infragravity waves. Model results reveal that infragravity waves were generated mainly through the bound wave mechanism, enhanced by the development of a phase lag with the shortwave energy envelope. Spectral analysis of the free surface elevation shows the generation of superharmonic and subharmonic infragravity waves, the latter dominating the free surface elevation variance close to shore. Modeling results suggest that subharmonic infragravity waves result, at least partly, from infragravity-wave merging, promoted by the combination of free and bound infragravity waves propagating across a several kilometer-wide surf zone. Due to the steeper slope of the upper part of the beach profile, observed and modeled reflection coefficients under moderate-energy show a strong tidal modulation, with a weak reflection at low tide (R² < 0.2) and a full reflection at high tide (R² ∼ 1.0). Under storm waves, the observed reflection coefficients remain unusually high for a dissipative beach (R2 ∼ 0.5 − 1.0), which is explained by the development of subharmonic infragravity waves with frequencies around 0.005 Hz, too long to suffer a substantial dissipation. [ABSTRACT FROM AUTHOR]

We consider the kinetics of first contact between two monomers of the same macromolecule. Relying on a fractal description of the macromolecule, we develop an analytical method to compute the mean first contact time for various molecular sizes. In our theoretical description, the non-Markovian feature of monomer motion, arising from the interactions with the other monomers, is captured by accounting for the nonequilibrium conformations of the macromolecule at the very instant of first contact. This analysis reveals a simple scaling relation for the mean first contact time between two monomers, which involves only their equilibrium distance and the spectral dimension of the macromolecule, independently of its microscopic details. Our theoretical predictions are in excellent agreement with numerical stochastic simulations. [ABSTRACT FROM AUTHOR]

Many cellular processes require molecular motors to produce motion and forces. Single molecule experiments have led to a precise description of how a motor works. Under most physiological conditions, however, molecular motors operate in groups. Interactions between motors yield collective behaviors that cannot be explained only from single molecule properties. The aim of this paper is to review the various theoretical descriptions that explain the emergence of collective effects in molecular motor assemblies. These include bidirectional motion, hysteretic behavior, spontaneous oscillations, and self-organization into dynamical structures. We discuss motors acting on the cytoskeleton both in a prescribed geometry such as in muscles or flagella and in the cytoplasm. [Copyright &y& Elsevier]

In Saccharomyces cerevisiae , dicentric chromosomes stemming from telomere fusions preferentially break at the fusion. This process restores a normal karyotype and protects chromosomes from the detrimental consequences of accidental fusions. Here, we address the molecular basis of this rescue pathway. We observe that tandem arrays tightly bound by the telomere factor Rap1 or a heterologous high-affinity DNA binding factor are sufficient to establish breakage hotspots, mimicking telomere fusions within dicentrics. We also show that condensins generate forces sufficient to rapidly refold dicentrics prior to breakage by cytokinesis and are essential to the preferential breakage at telomere fusions. Thus, the rescue of fused telomeres results from a condensin- and Rap1-driven chromosome folding that favors fusion entrapment where abscission takes place. Because a close spacing between the DNA-bound Rap1 molecules is essential to this process, Rap1 may act by stalling condensins. • Rap1 and condensin promote dicentric breakage at telomere fusions • Condensin refolds stretched dicentric bridges prior to their breakage by septation • Breakage hotspots result from a higher chance of being entrapped at the abscission site • Rap1 bound in tandem with close spacing may stall condensin by steric hindrance Preferential breakage of dicentric chromosomes at telomere fusions backs up in yeast the essential protective function of telomeres. Guérin et al. show that this rescue pathway depends on tight Rap1 DNA binding at the fusion and condensin-dependent dicentric refolding prior to DNA breakage at the abscission site. [ABSTRACT FROM AUTHOR]

We analyze the mean squared displacement of a Brownian particle in a medium with a spatially varying local diffusivity, which is assumed to be periodic. When the system is asymptotically diffusive, the mean-squared displacement, characterizing the dispersion in the system, is, at late times, a linear function of time. A Kubo-type formula is given for the mean-squared displacement, which allows the recovery of some known results for the effective diffusion constant De in a direct way, but also allows an understanding of the asymptotic approach to the diffusive limit. In particular, as well as as computing the slope of a linear fit to the late-time mean-squared displacement, we find a formula for the constant where the fit intersects the y axis. [ABSTRACT FROM AUTHOR]

The forces acting on optically trapped particles are commonly assumed to be conservative. Nonconservative scattering forces induce toroidal currents in overdamped liquid environments, with negligible effects on position fluctuations. However, their impact in the underdamped regime remains unexplored. Here, we study the effect of nonconservative scattering forces on the underdamped nonlinear dynamics of trapped nanoparticles at various air pressures. These forces induce significant low-frequency position fluctuations along the optical axis and the emergence of toroidal currents in both position and velocity variables. Our experimental and theoretical results provide fundamental insights into the functioning of optical tweezers and a means for investigating nonequilibrium steady states induced by nonconservative forces. [ABSTRACT FROM AUTHOR]

We consider a model of a particle trapped in a harmonic optical trap but with the addition of a nonconservative radiation induced force. This model is known to correctly describe experimentally observed trapped particle statistics for a wide range of physical parameters, such as temperature and pressure. We theoretically analyze the effect of nonconservative force on the underlying steady state distribution as well as the power spectrum for the particle position. We compute perturbatively the probability distribution of the resulting nonequilibrium steady states for all dynamical regimes underdamped through to overdamped and give expressions for the associated currents in phase space (position and velocity). We also give the spectral density of the trapped particle's position in all dynamical regimes and for any value of the nonconservative force. Signatures of the presence of nonconservative forces are shown to be particularly strong for the underdamped regime at low frequencies. [ABSTRACT FROM AUTHOR]

We study the dynamics of local bond orientation in regular hyperbranched polymers modeled by Vicsek fractals. The local dynamics is investigated through the temporal autocorrelation functions of single bonds and the corresponding relaxation forms of the complex dielectric susceptibility. We show that the dynamic behavior of single segments depends on their remoteness from the periphery rather than on the size of the whole macromolecule. Remarkably, the dynamics of the core segments (which are most remote from the periphery) shows a scaling behavior that differs from the dynamics obtained after structural average. We analyze the most relevant processes of single segment motion and provide an analytic approximation for the corresponding relaxation times. Furthermore, we describe an iterative method to calculate the orientational dynamics in the case of very large macromolecular sizes. [ABSTRACT FROM AUTHOR]