Search

The research results and evaluation of the applicability of the original composition of hybrid paper based on silver nanowires (AgNWs), cellulose pulp (CP), and carbon nanotubes (CNTs) are presented and discussed. The material tested was used to manufacture sensors for mechanical deformation resulting from external influences or related to human activity interactions. The sensors were fabricated using an AgNWs + CP suspension and additives by the vacuum filtration method. The substrate obtained was machined and then laminated with a layer of poly(dimethylsiloxane) (PDMS). The recorded responses to selected types of imposed mechanical interactions in the form of changes in the relative resistance of the sensor throughout the tests showed a close cause-and-effect relationship. The response of the tested systems when applying an alternating magnetic field was also observed. The results indicate that the proposed solutions can find application in the monitoring of mechanical interactions resulting from the dynamic behavior of physical objects, as well as derived from selected human vital functions.

Silver nanowires (AgNWs) represent an excellent material for many advanced applications due to their thermal and electrical properties. However, synthesising materials with the desired characteristics requires knowledge of the parameters affecting their size and an appropriate fabrication method. This paper presents a study on the synthesis of silver nanowires using the polyol process by conventional and microwave heating. Various polyols (1,2-ethanediol, 1,3-propanediol, 1,3-butanediol, 1,4-butanediol, 1,5-pentanediol) with different viscosities and dielectric properties were used as reductants. It resulted in nanowires with an average diameter of 119–198 nm. It was found that, in contrast to the viscosity and dielectric constant of the alcohol used, the heating method had a limited effect on the average diameter and length value of the final product. The performed studies indicate an optimal strategy for fabricating one-dimensional silver nanostructures using the polyol method.

The stability along with thermal and rheological characteristics of ionanofluids (INFs) profoundly depend on the protocol of preparation. Therefore, in this work, the effect of ultrasonication time on microstructure, thermal conductivity, and viscosity of INFs containing 0.2 wt% of originally ultra-long multi-walled carbon nanotubes (MWCNTs) and four different ILs, namely 1-propyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, 1-ethyl-3-methylimidazolium thiocyanate, or 1-ethyl-3-methylimidazolium tricyanomethanide, was studied. The INFs were obtained by a two-step method using an ultrasonic probe. The ultrasonication process was performed for 1, 3, 10, or 30 min at a constant nominal power value of 200 W. The obtained results showed that for the shortest sonication time, the highest thermal conductivity enhancement of 12% was obtained. The extended sonication time from 1 to 30 min caused the cutting of MWCNTs and breaking the nanoparticle clusters, leading to a decrease in the average length of the nanotube bundles by approx. 70%. This resulted in a decline in thermal conductivity even by 7.2% and small deviations from the Newtonian behavior of INFs.

Polyanhydrides based on betulin are promising materials for use in controlled drug delivery systems. Due to the broad biological activity of betulin derivatives and lack of toxicity in vitro and in vivo, these polymers can be used both as polymeric prodrug and as carriers of other biologically active compounds. In this study, we develop a novel amphiphilic branched polyanhydrides synthesized by the two-step melt polycondensation of betulin disuccinate (DBB) and a tricarboxylic derivative of poly(ethylene glycol) (PEG_COOH). DBB and PEG_COOH were used as the hydrophobic and hydrophilic segments, respectively. The content of DBB in copolymers was from 10 to 95 wt%. Copolymers were assessed for their cytostatic activity against various cancer cell lines. Compared to linear DBB and PEG-based polyanhydrides, the branched polyanhydrides exhibited higher anticancer activity. The obtained polymers were able to self-assemble in water to form micelles with hydrodynamic diameters from 144.8 to 561.8 nm. and are stable over a concentration range from 12.5 µg/mL to 6.8 mg/mL. The formed micelles were found to be spherical in shape using a scanning electron microscope. It was found that the structure and composition of polyanhydrides affected the hydrodynamic diameter of the micelles. The branched betulin-based polyanhydrides have the potential to serve as biodegradable polymer prodrugs or carriers for other bioactive compounds.

This paper describes the preparation and characterization of polymer-drug systems based on polymeric microspheres obtained from poly(betulin disuccinate-co-sebacic acid). The active compound that was coupled to the betulin-based carriers was rifampicin (RIF), an ansamycin drug used in the treatment of tuberculosis. Poly(betulin disuccinate-co-sebacic acid) microspheres were prepared using a solvent evaporation technique from copolymers obtained by polycondensation of betulin disuccinate (DBB) and sebacic acid (SEB). The content of sebacic acid in the copolymers was 20, 40, 60 and 80 wt%, respectively. Small and large rifampicin-loaded microspheres were obtained for each of the copolymers. The initial amount of drug was 10, 30 or 50 wt%, based on the weight of the polymer. Particles obtained in this study were round in shape with diameter in the range of 2–21 μm and of orange to red colour originating from rifampicin. The RIF encapsulation efficacy varied from 7% to 33%. Drug loading varied from 2% to 13% and increased at a higher RIF ratio. The highest degree of drug loading was observed for large particles, in which the initial amount of drug (at the particle preparation stage) was 50 wt%. Microspheres prepared from betulin-based polyanhydrides may have significant applications in drug delivery systems. The concentration of loaded drug was enough to obtain bactericidal effects against reference S. Aureus ATCC 25923 bacteria.

Hexokinase 2 (HK2), an enzyme of the sugar kinase family, plays a dual role in glucose metabolism and mediating cancer cell apoptosis, making it an attractive target for cancer therapy. While positive HK2 expression usually promotes cancer cells survival, silencing or inhibiting this enzyme has been found to improve the effectiveness of anti-cancer drugs and even result in cancer cell death. Previously, benitrobenrazide (BNBZ) was characterized as a potent HK2 inhibitor with good anti-cancer activity in mice, but the effect of its trihydroxy moiety (pyrogallol-like) on inhibitory activity and some cellular functions has not been fully understood. Therefore, the main goal of this study was to obtain the parent BNBZ (2a) and its three dihydroxy derivatives 2b–2d and to conduct additional physicochemical and biological investigations. The research hypothesis assumed that the HK2 inhibitory activity of the tested compounds depends on the number and location of hydroxyl groups in their chemical structure. Among many studies, the binding affinity to HK2 was determined and two human liver cancer cell lines, HepG2 and HUH7, were used and exposed to chemicals at various times: 24 h, 48 h and 72 h. The study showed that the modifications to the structures of the new BNBZ derivatives led to significant changes in their activities. It was also found that these compounds tend to aggregate and exhibit toxic effects. They were found to contribute to: (a) DNA damage, (b) increased ROS production, and (c) disruption of cell cycle progression. It was observed that, HepG2, occurred much more sensitive to the tested chemicals than the HUH7 cells; However, regardless of the used cell line it seems that the increase in the expression of HK2 in cancer cells compared to normal cells which have HK2 at a very low level, is a serious obstacle in anti-cancer therapy and efforts to find the effective inhibitors of this enzyme should be intensified.

The concept of IoNanofluids (INFs) as the stable dispersions of nanoparticles in ionic liquids was proposed in 2009 by Nieto de Castro’s group. INFs characterize exciting properties such as improved thermal conductivity, non-volatility, and non-flammability. This work is a continuation of our studies on the morphology and physicochemistry of carbon-based nanomaterials affecting thermal conductivity, viscosity, and density of INFs. We focus on the characterization of dispersions composed of long carboxylic group-functionalized multi-walled carbon nanotubes and 1-ethyl-3-methylimidazolium thiocyanate. The thermal conductivity of INFs was measured using KD2 Pro Thermal Properties Analyzer (Decagon Devices Inc., Pullman, WA, USA). The viscosity was investigated using rotary viscometer LV DV-II+Pro (Brookfield Engineering, Middleboro, MA, USA). The density of INFs was measured using a vibrating tube densimeter Anton Paar DMA 5000 (Graz, Austria). The maximum thermal conductivity enhancement of 22% was observed for INF composed of 1 wt% long carboxylic group-functionalized multi-walled carbon nanotubes.

Viability of the continuous-flow synthesis of rhomboidal copper(II) oxide (CuO) micro- and nanonoparticles was demonstrated. It has been shown that ultrasonic mixing of reactants, in the stage of Cu(OH)2 synthesis, followed by microwave irradiation of the resulting suspension, gives very fine particles of CuO at high yield and within minutes. Near optimal parameters for the synthesis of fine particles in the continuous reactor were determined.