Search

Abstract Magnetic Josephson junctions (MJJs) have emerged as a prominent playground to explore the interplay between superconductivity and ferromagnetism. A series of fascinating experiments have revealed striking phenomena at the superconductor/ferromagnet (S/F) interface, pointing to tunable phase transitions and to the generation of unconventional spin-triplet correlations. Here, we show that the Josephson effect, being sensitive to phase space variation on the nanoscale, allows a direct observation of the spin polarization of the S/F interface. By measuring the temperature dependence of the Josephson magnetic field patterns of tunnel MJJs with strong and thin F-layer, we demonstrate an induced nanoscale spin order in S along the superconducting coherence length at S/F interface, i.e., the inverse proximity effect, with the first evidence of full spin screening at very low temperatures, as expected by the theory. A comprehensive phase diagram for spin nanoscale ordering regimes at S/F interfaces in MJJs has been derived in terms of the magnetic moment induced in the S-layer. Our findings contribute to drive the design and the tailoring of S/F interfaces also in view of potential applications in quantum computing.

Detectors capable of resolving the number of photons are essential in many applications, ranging from classic photonics to quantum optics and quantum communication. In particular, photon-number-resolving detectors based on arrays of superconducting nanostrips can offer a high detection efficiency, a low dark count rate, and a recovery time of a few nanoseconds. In this work, we use a detector of this kind for the unbiased generation of random numbers by following two different methods based on the detection of photons. In the former, we exploit the property that the light is equally distributed on each strip of the entire detector, whereas in the latter, we exploit the fact that, for a high average number of photons, the parity of the Poisson distribution of the number of photons emitted by the laser tends to be zero. In addition, since these two methods are independent, it is possible to use them at the same time.

Photon number resolving detectors find space in many fields, such as quantum optics, boson sampling, and fluorescence spectroscopy. In particular, the reconstruction of the input photon distribution is essential in quantum communications to detect photon-number-splitting attacks. In this work, we discuss the operation configurations of a photon number resolving detector based on superconducting nanostrips at a wavelength of 1550 nm from a temporal point of view. We set a time binning and acquired the number of recorded pulses per bin by means of a time-to-digital converter. We studied the predictions of two theoretical models and compared them to the experimental data in order to analyze their operation regimes depending on the binwidth and to employ them for the reconstruction of the input photon distribution. We applied this method to a continuous-wave laser source, showing that the former can be used for the characterization of nonpulsed light sources, even with a photon emission rate so low that the dark count rate of a superconducting nanostrip is not negligible.

Non-centrosymmetric superconductors have recently received significant interest due to their intriguing physical properties such as multigap and nodal superconductivity, helical vortex states, as well as non-trivial topological effects. Moreover, large values of the upper critical magnetic field have been reported in these materials. Here, we focus on the study of the temperature dependence of the perpendicular magnetic field of NbRe and NbReN films patterned in micrometric strips. The experimental data are studied within the Werthamer–Helfand–Hohenberg theory, which considers both orbital and Zeeman pair breaking. The analysis of the results shows different behavior for the two materials with a Pauli contribution relevant only in the case of NbReN.

The strong requirement for high-performing quantum computing led to intensive research on novel quantum platforms in the last decades. The circuital nature of Josephson-based quantum superconducting systems powerfully supports massive circuital freedom, which allowed for the implementation of a wide range of qubit designs, and an easy interface with the quantum processing unit. However, this unavoidably introduces a coupling with the environment, and thus to extra decoherence sources. Moreover, at the time of writing, control and readout protocols mainly use analogue microwave electronics, which limit the otherwise reasonable scalability in superconducting quantum circuits. Within the future perspective to improve scalability by integrating novel control energy-efficient superconducting electronics at the quantum stage in a multi-chip module, we report on an all-microwave characterization of a planar two-transmon qubits device, which involves state-of-the-art control pulses optimization. We demonstrate that the single-qubit average gate fidelity is mainly limited by the gate pulse duration and the quality of the optimization, and thus does not preclude the integration in novel hybrid quantum-classical superconducting devices.

Aluminum Josephson junctions are the building blocks for the realization of superconducting quantum bits. Attention has been also paid to hybrid ferromagnetic Josephson junctions, which allow switching between different magnetic states, making them interesting for applications such as cryogenic memories, single-photon detectors, and spintronics. In this paper, we report on the fabrication and characterization of high-quality ferromagnetic Josephson junctions based on aluminum technology. We employed an innovative fabrication process inspired by niobium-based technology, allowing us to obtain very high-quality hybrid aluminum Josephson junctions; thus, supporting the use of ferromagnetic Josephson junctions in advanced quantum circuits. The fabrication process is described in detail and the main DC transport properties at low temperatures (current–voltage characteristic, critical current as a function of the temperature, and the external magnetic field) are reported. Here, we illustrate in detail the fabrication process, as well as the main DC transport properties at low temperatures (current–voltage characteristic, critical current as a function of the temperature, and the external magnetic field).

We present the status of the art of the Archimedes experiment, devoted to measuring the debated interaction of quantum vacuum fluctuations and gravity. The method is essentially the weighing of the transition energy of a layered superconductor where the contribution of vacuum energy to the transition energy is expected to be relevant. The transition is obtained by modulating the temperature of the superconducting sample at a frequency of about 10 mHz and the expected change of weight is measured with a suitably designed high sensitivity cryogenic beam balance. In this paper, we present an overview of the experiment, discussing the expected signal to be measured, and presenting in particular the result of a prototype balance operated in our present laboratory. In the frequency range of the measurement, the sensitivity is affected mainly by seismic, thermal, sensor, and control noise. We discuss these points showing in particular the design of the cryogenic apparatus, the final balance, and the quiet seismic site that will host the final measurement.

In this study, matrix-assisted pulsed laser evaporation (MAPLE) was used to deposit graphene-like materials (GL), a new class of biocompatible graphene-related materials (GRMs) obtained from a controlled top-down demolition of a carbon black, on silicone slices to test their potential use as functional coating on invasive medical devices as indwelling urinary catheters. Results indicate that the relevant chemical-physical features of the deposit (controlled by FTIR and AFM) were maintained after MAPLE deposition. After deposition, GL films underwent a biological survey toward target cellular lines (murine fibroblast NIH3T3, human keratinocytes HaCAT and the human cervical adenocarcinoma epithelial-like HeLa). Results indicate that the GL films did not lead to any perturbations in the different biological parameters evaluated. The presented results and the possibility to further functionalize the GL or combine them with other functional materials in a hybrid fashion to assure a tighter adhesion onto the substrate for use in harsh conditions open the door to practical applications of these new-concept medical devices (drug delivery, next generation flexible devices, multifunctional coatings) paving the way to the prevention of nosocomial infections driven by catheterization through antibiotics-free approaches.

Lidar measurement are widely used today for remote sensing and atmosphere monitoring. Indeed, depending on the specific wavelength adopted, it is possible to determine the presence of specific molecules and pollutants in the atmosphere. Several studies claim that the use of Lidar systems with wavelength larger than 1 µm would provide a special tool for aerosols and carbon dioxide observations. Aerosols measurements are typically performed up to the wavelength ? = 1064 nm, while for longer wavelengths they are limited by the detector noise. In this work the results of a preliminary Lidar measurement at ? = 1064 nm by using a Superconducting Nanowire Single Photon Detector (SNSPD) are presented. SNSPDs are characterized by high efficiency in the infrared wavelength domain (IR), low noise and dead time, which can in turn enhance the signal quality in Lidar atmospheric measurements at ? > 1 µm, an interesting range for environmental applications. Preliminary measurements have been performed at the University of Naples Federico II by using a NbTiN SNSPD cooled at a temperature of 4.2 K and the Lidar system MALIA. The experimental results at 1064 nm demonstrate the feasibility of the approach for aerosol measurements in the IR, opening the way to further investigations on the use of these detectors for Lidar atmospheric measurements in the IR. The backscattering coefficient, ?? has been also estimated and its value is around 10-6 m-1sr-1.

Herein, smart coatings based on photo-responsive polymer nanocapsules (NC) and deposited by laser evaporation are presented. These systems combine remotely controllable release and high encapsulation efficiency of nanoparticles with the easy handling and safety of macroscopic substrates. In particular, azobenzene-based NC loaded with active molecules (thyme oil and coumarin 6) were deposited through Matrix-Assisted Pulsed Laser Evaporation (MAPLE) on flat inorganic (KBr) and organic (polyethylene, PE) and 3D (acrylate-based micro-needle array) substrates. SEM analyses highlighted the versatility and performance of MAPLE in the fabrication of the designed smart coatings. DLS analyses, performed on both MAPLE- and drop casting-deposited NC, demonstrated the remarkable adhesion achieved with MAPLE. Finally, thyme oil and coumarin 6 release experiments further demonstrated that MAPLE is a promising technique for the realization of photo-responsive coatings on various substrates.

Josephson junctions drive the operation of superconducting qubits and they are the key for the coupling and the interfacing of superconducting qubit components with other quantum platforms. They are the only means to introduce non linearity in a superconducting circuit and offer direct solutions to tune the properties of a superconducting qubit, thus enlarging the possible qubit layouts. Junctions performances and tunability can take advantage of using a large variety of barriers and their special functionalities. We mention pertinent results on the advances in understanding the properties of ferromagnetic junctions, which makepossible the use of these devices either as memory elements and as core circuit elements.