Search

The Winkie Drill is an agile, commercially available rock coring system. The U.S. Ice Drilling Program has modified a Winkie Drill for subglacial rock and ice/rock interface coring, as well as drilling and coring access holes through ice. The original gasoline engine was replaced with an electric motor though the two-speed gear reducer and Unipress hand feed system were maintained. Using standard aluminum AW34 drill rod (for 33.5mm diameter core), the system has a depth capability of 120 m. The drill uses forward fluid circulation in a closed loop system. The drilling fluid is Isopar K, selected for favorable properties in polar environment. When firn or snow is present at the drill site, casing with an inflatable packer can be deployed to contain the drill fluid. The Winkie Drill will operate from sea level to high altitudes and operation results in minimal environmental impact. The drill can be easily and quickly assembled and disassembled in the field by two people. All components can be transported by Twin Otter or helicopter to the field site. [ABSTRACT FROM AUTHOR]

The drilling of a deep borehole in ice is an undertaking that spans several seasons. Over recent decades such drilling has become widespread in both polar regions. Owing to the remoteness of the drill sites, considerable cost is associated with the drilling of a deep borehole of several thousand meters. The replicate coring system allows re-drilling of ice core at select depths within an existing parent borehole. This effectively increases the yield of the existing borehole and permits re-sampling of ice in areas of high scientific value. The replicate coring system achieves this through the combination of actuators, motors, sensors and a computerized control system. The replicate coring drill is a further development of the deep ice-sheet coring (DISC) drill, extending the capabilities of the DISC drill to include replicate coring. [ABSTRACT FROM AUTHOR]

Many of the ice-coring objectives in the Ice Drilling Program Office (IDPO) Long Range Science Plan, such as those in the International Partnerships in Ice Core Sciences (IPICS) 2k array and 40k network, are attainable in many locations with an intermediate depth drill (IDD) that can collect core from a fluid-filled hole down to 1500 m depth. The Ice Drilling Design and Operations (IDDO) group has designed and is in the process of building an agile IDD to meet this objective. The drill tent, power distribution and core-processing systems are an integral part of the IDD, which can be deployed by small aircraft and assembled by hand to minimize logistic requirements. The new drill system will be ready for testing in Greenland beginning in late spring 2014. The first production drilling is scheduled for the 2014/15 field season at the South Pole. [ABSTRACT FROM AUTHOR]

The Blue Ice Drill (BID) is a large-diameter agile drill system designed by the Ice Drilling Design and Operations group of the University of Wisconsin-Madison to quickly core-clean 241 mm diameter ice samples from near-surface sites. It consists of a down-hole motor/gear reducer rotating a coring cutter and core barrel inside an outer barrel for efficient cuttings transport in solid ice. A variable-frequency drive and custom control box regulates electrical power to the drill. Torque reaction is accomplished on the surface via handles attached to a torsion stem. Core recovery is achieved with either core dogs in the sonde or with a separate core recovery tool. All down-hole tools are suspended on a collapsible tripod via ropes running on a capstan winch. The BID is operated by a minimum of two people and has been used successfully during two seasons of coring on a blue ice area of Taylor Glacier, Antarctica. An updated version of the drill system, BID-Deep, has been designed to recover cores to depths up to 200 m. [ABSTRACT FROM AUTHOR]