Search

Laser powder bed fusion (LPBF) includes a few printing techniques widely used, in recent years, concerning the additive manufacturing of Ti6Al4V alloys. These produced parts, typically utilized in sectors such as aerospace and biomedical, are characterized by very high added value. It is therefore fundamental to identify the influence of process parameters typical of LPBF technology on the occurrence of warping leading to process failure. This study deals with the characterization of single-track and “micro-scale” level warping phenomena which may lead to protrusion of material over the powder bed and process failure before normal termination. This phenomenon was investigated as a function of process parameters, referring also to the strength and ductility characteristics of the manufactured samples. With this purpose, several samples were printed using variable process parameters both in terms of line energy density (LED) values and in terms of laser power and speed combinations such as to guarantee constant LED values. For the samples that did not show significant micro-warping phenomena, in addition to the transversal and longitudinal geometric characterization of the single track, tensile tests were performed to determine both the resistance of the material and the ductility characteristics. The single tracks, for given process parameters, were printed on a homogeneous material substrate. For every single track, a microstructural and morphological transverse and longitudinal characterization has been carried out and the measured geometrical features were correlated to the process parameters. The obtained results allowed the identification of a new threshold parameter, indicating the limit operating conditions beyond which significant warping phenomena and process failure occur.

Although in recent times the use of solid-state welding processes as friction stir welding (FSW) has become increasingly widespread, for some joint morphologies, as lap joints, there are still signifcantly less data available on both process parameters optimization and energy consumption. In the present paper, the authors investigated the possibility of enhancing the joint quality in two diferent confgurations, i.e. lap and butt joints, taking into account specifc thermal contribution (STC) conferred to the weld. Strength, micro-hardness and microstructure were evaluated on the produced AA2024 aluminum alloys butt and lap joints. The surface response method (RSM) was used to investigate the efects of the main process parameters and to identify optimal technological parameters in terms of joint resistance, while the specifc energy consumption (SEC) of the entire process was acquired with the aim to provide design guidelines taking into account, at the same time, mechanical performance and environmental impact. It was found that the same optimal range of revolutionary pitch can be identifed for both the confgurations. Additionally, maximizing welding speed, for a given revolutionary pitch, contributes to signifcantly reduce the environmental impact of the process with no detrimental effect on the joint performance.

Magnesium alloys, because of their good specific material strength, can be considered attractive by different industry fields, as the aerospace and the automotive one. However, their use is limited by the poor formability at room temperature. In this research, a numerical approach is proposed in order to determine an analytical expression of material formability in hot incremental forming processes. The numerical model was developed using the commercial software ABAQUS/Explicit. The Johnson-Cook material model was used, and the model was validated through experimental measurements carried out using the ARAMIS system. Different geometries were considered with temperature varying in a range of 25–400 °C and wall angle in a range of 35–60°. An analytical expression of the fracture forming limit, as a function of temperature, was established and finally tested with a different geometry in order to assess the validity.

In the last decades, new flexible manufacturing processes have been developed to face the demands, by many industrial fields, for highly customized complex functional parts. The peculiar design of these components often overcomes conventional sheet metal and bulk metal forming processes capabilities. In order to face this issue, new hybrid techniques, capable of exploit key advantages of different processes, have to be developed. In this study, a method to obtain sheet-bulk joints, based on the Linear Friction Welding process, is proposed. The feasibility of the technique was investigated through an experimental campaign carried out with varying pressure and oscillation frequency using AA6082-T6 aluminum alloy. The main mechanical and metallurgical properties of the produced joints, including typical material flow defects, were highlighted. It was found that sound hybrid sheet-bulk joints can be produced by the proposed approach. Finally, it was highlighted how the height of the weld center zone plays a key role on the mechanical properties of the produced joints.

In recent decades, the focus of research has shifted towards new production technologies with the aim of optimizing production and reducing costs. These innovative technologies include additive manufacturing processes as Selective Laser Melting (SLM). The analysis of the literature on the identification of optimal building orientation to maximize the mechanical properties and minimize porosity of the final products highlights contrasting results, denoting that the thermomechanical complexity of the process, as associated with the variation of the building orientation, has not been fully clarified. A study in which the building orientation effect was evaluated together with the geometry of the sample and characterized as a function of the preferentially active heat exchange phenomena was carried out with the aim to provide guidelines for the choice of the orientation angle. Heat accumulation phenomena observed in SLM were taken into account to define three geometrical parameters able to identify the causes of the decrease of mechanical properties due to incorrect choice of the orientation angle.

Linear friction welding (LFW) is a solid-state joining process used to weld non-axisymmetric components. Material joining is obtained through the reciprocating motion of two specimens undergoing an axial force. During this process, the heat source is determined by the frictional work transformed into heat. This results in a local softening of the material and plays a key role in the onset of the bonding conditions. In this paper, a critical analysis of the different approaches used to simulate the LFW processes is provided. The focus of the paper is the comparison of different modeling strategies and the most relevant outputs available, i.e. temperature, strain and stress distribution, material flow, axial shortening and residual stress. Major issues arising due to the complexity of the process are discussed, highlighting strengths and weaknesses of each approach.

A numerical approach to model the selective laser sintering (SLS) of polypropylene is proposed. A 3D thermal model was developed and thus enables the prediction of the temperature fields and the extension of the sintered area in the powder bed taking into account the phase change during multiple laser passes. Powder–liquid, liquid–solid and solid–liquid phase changes were modelled during the SLS and the subsequent cooling processes. Then, a 3D thermomechanically coupled model was set up based on the temperature results of the thermal model in order to predict the distortion of the produced parts after cooling down. Different pre-heating temperatures were considered, highlighting their influence on the final part properties.

Manufacturing processes, as used for discrete part manufacturing, are responsible for a substantial part of the environmental impact of products. Despite that, most of metalworking processes are still poorly documented in terms of environmental footprint. To be more specific, the scientific research has well covered conventional machining processes, concerning the other processes there is a lack of knowledge in terms of environmental load characterization instead. The present paper aims to contribute to fill this knowledge gap and an energetic analysis of Friction Stir welding (FSW) is presented. Following the CO2PE! methodological approach, power studies and a preliminary time study have been performed in order to comply with the In-Depth approach. The influence of the most relevant process parameters is analyzed regarding the required FSW energy. Finally, a few potential improvement strategies to reduce FSW energy consumption are reported.

Friction Stir Extrusion is an innovative direct-recycling technology for metal machining chips. During the process a specifically designed rotating tool is plunged into a cylindrical matrix containing the scraps to be recycled. The stirring action of the tool prompts solid bonding related phenomena allowing the back extrusion of a full dense rod. This process results to be particularly relevant because allows the reuse of the scrap without any previous treatment. Experiments have been carried out in order to investigate the influence of the process parameters on the extrudes quality and a numerical model has been developed in order to simulate the evolution of the material flow.

In this study, two bonding criteria, previously used for porthole die extrusion, are applied to FSW starting from the local value of the main field variables calculated through a specifically developed 3D numerical model of the process. Their applicability and effectiveness have been assessed through an experimental and numerical campaign carried out with the main process parameters varying in a wide range. The pressure–time–flow criterion was demonstrated to be better suited for FSW processes when large welding speed is used.

Solid-state bonding occurs in several manufacturing processes, as Friction Stir Welding, Porthole Die Extrusion and Roll Bonding. Proper conditions of pressure, temperature, strain and strain rate are needed in order to get effective bonding in the final component. In the paper, a neural network is set up, trained and used to predict the bonding occurrence starting from the results of specific numerical models developed for each process. The Plata-Piwnik criterion was used in order to define a quantitative parameter taking into account the effectiveness of the bonding. Excellent predictive capability of the network is obtained for each process.

Lap joints of Ti–6Al–4V were produced and the effect of the main process parameters was studied through macro and micro investigations highlighting mechanical resistance, microhardness profiles, grain size and phase distributions. A dedicated numerical model was used to link the input process parameters to temperature and strain distributions and to the final microstructure in the welded joint. It is found that the strain produced in the stir zone by proper combination of process parameters plays a fundamental role in the final microstructure and mechanical properties of the joints.

Friction Stir Welding (FSW) is a solid state welding process patented in 1991 by TWI; initially adopted to weld aluminum alloys, it is now being successfully used also for high resistant materials. Welding of titanium alloys by traditional fusion welding techniques presents several difficulties due to high material reactivity with oxygen, hydrogen, and nitrogen with consequent embrittlement of the joint. In this way FSW represents a cost effective and high quality solution. The final mechanical properties of the joints are strictly connected to the microstructural evolutions, in terms of phase change, occurring during the process. In the paper a 3D FEM model of the FSW welding process, based on a thermo-mechanical fully coupled analysis, is presented. The model, tuned both for the thermo-mechanical analysis and the phase transformation through experimental data, is able to predict the phase volume fraction in the typical zones of the joints at the varying of the main process parameters. The obtained results permit to assess that the tuned FEM model of the FSW process can be utilized as an effective design tool.

In the paper solid state bonding conditions obtained in friction stir welding (FSW) of AA5754-H111 butt joints are analysed, considering the so called zigzag line in the transverse section of the joints. A wide experimental campaign was carried out varying both tool advancing speed and tool rotational one. The effects of the process on the mechanical properties of the joint were highlighted and micro- and macro-observations were used in order to explain the reasons of the enhanced mechanical properties found for the welded material. Numerical results derived from a FEM model previously developed by the authors were utilised to point out the different mechanical and metallurgical behavior of the obtained joints.

Linear Friction Welding (LFW) is a solid-state joining process applied to non-axisymmetric components. LFW involves joining of materials through the relative motion of two components undergoing an axial force. In such process the heat source is given by the frictional forces work decaying into heat determining a local softening of the material and eventually bonding conditions. In the paper the authors present a designed and assembled laboratory fixture for LFW operations and the results of an experimental and numerical campaign aimed to weld steel parts. The dedicated fixture permitted to highlight the effect of the most important process parameters. Process conditions allowing effective bonding conditions were highlighted and local conditions of pressure and temperature determining effective bonding of the specimens were determined.

One of the most relevant aspects of friction stir welding is the possibility to weld different materials. In the present paper, the authors present an improved continuum finite element model for the simulation of friction stir welding processes aimed to obtain T joints, made of a stringer in AA7175-T73511 and of a skin in AA2024-T4. The model, taking into account the thermomechanical behaviours of the two different materials, is utilised to study the occurring material flow and residual stress state. Numerical results are compared with experimental observations: the model is able to predict the material flow, obtaining important information on the joint failure mode.

FSW of titanium alloys is nowadays one of the most challenging welding operations, even with a solid state process, due to the thermo-mechanical and thermo-chemical characteristics of such materials. Due to the relevant application of titanium alloys in the aeronautic and aerospace industries, in the recent years few attempts were carried out to develop FSW processes aimed to maximize the mechanical performances of the welded parts. In the paper a new fixture is presented allowing obtaining effective FSW joints of titanium blanks, which were investigated through mechanical and metallurgical tests highlighting the peculiarities of FSW of titanium alloys.

Aluminum alloys are widely used in the aircraft industries even if such materials present lower ductility with respect to steels, anisotropy phenomena and, more important, they are often “difficult” to be welded or even “non-weldable”. In the last years the friction stir welding process (FSW) was proposed and applied in order to get good mechanical and technological performances of the joints. In this paper, an experimental and numerical investigation on the lap joining of AA2198-T4 aluminum alloy blanks by FSW is presented. In particular the joints strength and metallurgical properties are investigated by varying the joint configuration and the tool geometry and rotational speed. It is found that the use of cylindrical–conical pin tools and the correct choice of the relative sheet positioning increase the welded nugget extension and integrity improving the mechanical performances of the obtained joints.

Friction stir welding (FSW) is an energy efficient and environmentally "friendly" (no fumes, noise, or sparks) welding process, during which the workpieces are welded together in a solid-state joining process at a temperature below the melting point of the workpiece material under a combination of extruding and forging. Since its invention in 1991 by TWI, such process has been reaching a continuously increasing popularity among aerospace, automotive and shipbuilding industries due its capability to weld unweldable or difficult-to-weld light alloys in different joint morphologies. In this paper a wide experimental campaign is carried out in order to obtain T and lap joints characterized by dimensions of industrial interest from two sheets, the stringer and the skin, of different materials. In particular a peculiar clamping fixture has been designed in order to assure a perfect contact between the stringer and the skin and to develop the “transparency” welding; a proper welding tool has been utilized allowing to obtain at the same time a sound joint and the designed final component fillet radii. Finally T-pull tests together with macro and micro observations have been developed at the varying of the main process parameters.

Friction stir spot welding (FSSW) has been proposed as an effective technology to spot weld the so-called “difficult to be welded” metal alloys. In the paper, a variation of the FSSW process has been considered. A tool path is given after the sinking phase nearby the initial penetration site; in this way a larger welding spot is obtained and more material is involved in the bonding process. The process mechanics of such modified FSSW process is highlighted and the joint strength undergoing tensile tests is considered at the varying both of the assigned tool path and of a few process parameters. Macro- and micro-analyses are made in order to analyze the local material microstructure evolution. It is found that improved performances, with respect to the “traditional” FSSW process, are obtained for all the considered case studies.

In friction stir welding and processing both a thermal flux and a mechanical action are exerted on the material determining metallurgical evolutions, changes in the mechanical behaviour and a complex residual stress state. In the paper, the metallurgical changes are examined through numerical simulation and experiments to highlight and distinguish the effects of thermal and mechanical loadings. A particular focus is made on the residual stresses generated during the stir processing of AA7075-T6 aluminium blanks. The predictions of FE model are validated by experimental measurements. Lastly, this paper presents an in-process quenching of the processed blanks for improved mechanical properties and microstructure.

Friction stir welding (FSW) appears to be a promising process even in the welding of blanks of different thicknesses. Actually, such particular tailor welded blanks (TWBs) are usually characterized by a reduction in ductility due to the utilized fusion welding process. In this paper the authors, starting from a preliminary feasibility study, investigate the possibility to improve the mechanical performances of friction stir welded blanks of aluminum alloy with different thicknesses. Both experiments and a FE analyses are developed for a few case studies with different thickness ratios between the blanks. The numerical investigations are performed with the aim to highlight the material temperature distribution during the process in order to determine process conditions for which an almost symmetric thermal flow is obtained in the two blanks of the joint. In this way, a few simple process design rules are derived and verified through experiments. In particular a thickness ratio up to 2 was considered and a joint resistance of about the 80% of the parent material ultimate tensile strength was observed.

The current paper focuses on the continuous dynamic recrystallization phenomena (CDRX) occurring in friction stir welding processes of AA6082 T6 aluminium alloys. In particular, in order to predict the average grain size, a properly trained neural network is linked to the finite element method (FEM) model of the process. The utilized net, which takes as inputs the local values of strain, strain rate, and temperature, was trained starting from experimental data and numerical results. The obtained results show the capability of the artificial intelligence (AI) technique in conjunction with the FE tool to predict the final microstructure in the joint section.

The results of experimental activity on friction stir welding (FSW) of aluminum alloys are reported. Butt joints of two different materials, namely AA2024-T4 and AA7075-T6, were investigated from a metallurgical point of view. Grain dimensions and insoluble particle densities were investigated both in the parent materials and in the joints. Furthermore, the effect of post-welding heat treatments on the joint strength was studied.

In the paper the results of a wide range of experiments on friction stir welding (FSW) of aluminium alloys are reported. In particular, the AA6082-T6 butt joints fatigue resistance was investigated by varying the most relevant process parameters. In addition, a revolutionary pitch was utilized in order to investigate the effects of the tool rotating speed and the tool feed rate. Observations of the fracture insurgence were developed for different levels of applied load.

In this paper the results of an experimental investigation into the local mechanical and morphological characterization of AA6082-T6 friction stir-welded (FSW) butt joints are illustrated. The softening effects of the welding process are highlighted through the use of micro-indentation tests on the top surface of the specimens. The effect of post-welding heat treatments was investigated, also.

Although friction stir welding (FSW) has been successfully used to join materials that are difficult-to-weld or unweldeable by fusion welding methods, it is still in its early development stage and, therefore, a scientific knowledge based predictive model is of significant help for thorough understanding of FSW process. In this paper, a continuum based FEM model for friction stir welding process is proposed, that is 3D Lagrangian implicit, coupled, rigid-viscoplastic. This model is calibrated by comparing with experimental results of force and temperature distribution, then is used to investigate the distribution of temperature and strain in heat affect zone and the weld nugget. The model correctly predicts the non-symmetric nature of FSW process, and the relationships between the tool forces and the variation in the process parameters. It is found that the effective strain distribution is non-symmetric about the weld line while the temperature profile is almost symmetric in the weld zone.

In friction stir welding (FSW), the welding tool geometry plays a fundamental role in obtaining desirable microstructures in the weld and the heat-affected zones, and consequently improving strength and fatigue resistance of the joint. In this paper, a FSW process with varying pin geometries (cylindrical and conical) and advancing speeds is numerically modeled, and a thermo-mechanically coupled, rigid-viscoplastic, fully 3D FEM analysis able to predict the process variables as well as the material flow pattern and the grain size in the welded joints is performed. The obtained results allow finding optimal tool geometry and advancing speed for improving nugget integrity of aluminum alloys.

In the paper a numerical model aimed to the determination of the average grain size due to continuous dynamic recrystallization phenomena (CDRX) in friction stir welding processes of AA6082 T6 aluminum alloys is presented. In particular, the utilized model takes into account the local effects of strain, strain rate and temperature; an inverse identification approach, based on a linear regression procedure, is utilized in order to develop the proper material characterization.

The increasing use of structural light alloys in the aeronautical, automotive and transportation industry is pushing researchers to find new solutions for the production of innovative components. Mixed joints made out dissimilar alloys represent a challenge for engineers to the difficulties arising in welding materials characterized by significantly different mechanical, thermal and chemical properties. In the paper, an overview of the most used process to produce dissimilar joints of aluminum, magnesium and titanium is given. Both fusion based and solid state welding processes can be used. Although the joining of these materials is possible, particular attention must be taken to the choice of process parameters in order to avoid the formation of intermetallics, often resulting in brittle behavior and poor mechanical properties of the joints.

Solid bonding based processes represent an effective solution in terms of both joints mechanical performances and sustainability. In the last years, both the academic and the industrial researchers focused their work on two solid-state processes: Friction Stir Welding (FSW) and Linear Friction Welding (LFW). The former, patented in 1991 by TWI, is used to weld sheet metal in different joint morphologies, i.e. butt, lap T and 3D joints. The latter has been known for several years, but a growing interest is observed in the last years due to the enhancement of the welding machines performances. LFW, used to join bulk components, is particularly suited for aeronautical and aerospace applications. In this paper, the potential of the two processes is investigated analysing the joints properties and the metallurgical modifications induced by the processes as related to the welded alloy. For both the processes, the effect of the main process variables is highlighted and the impact on industrial production is pointed out.

Spot welding can be considered a very common joining technique in automotive and transportation industries as it permits to obtain effective lap-joints with short process times and what is more it is easily developed through robots and automated systems. Recently, Friction Stir Spot Welding (FSSW) has been proposed as a natural evolution of the already known Friction Stir Welding (FSW) process, allowing to obtain sound spot joints that do not suffer from the insurgence of typical welding defects due to the melting of the base material. Similarly to FSW, both geometrical and technological parameters must be considered as they affect the material flow and the heat flux generated during the process. In the paper the results of an experimental campaign on AA6082-T6 aluminum alloy are presented. Lap joints have been FSSWed under different process conditions. During the process temperature fields have been measured through embedded thermocouples. The micro and macro mechanical joint properties have been measured and the effect of the joint geometry on the microstructure and local strength of the material was highlighted.