Search

A new ECRH launcher mainly aimed at experiments on MHD stabilization has been recently installed in FTU and integrated with a Real Time controller. The new plug-in antenna is capable of injecting two beams over wide angular ranges, ±40 in toroidal and ±15 < θ < 44 in poloidal direction with fast mirror speed. The power is delivered to the launcher with two additional transmission lines (TL) connected to the existing ECRH system with remotely controlled switches. After the optical alignment of the TLs, a campaign of tests on the steering antenna was made with the launcher ex- and in-vessel. A procedure to calibrate the absolute mirror angular position was developed and successfully used. First high power pulses were carried out on plasma target delivering 2 × 0.3 MW EC power for 200 ms. © 2013 CNR-IFP Instituto di Fisica Plasma.

The use of quadrupole mass spectrometers in plasma experiments with magnetic field confinement presents troublesome problems because of the presence of static magnetic fields. In mass spectrometers, the Lorentz force associated with the magnetic field deflects the ion trajectory in the analyzer section with a subsequent loss of instrument sensitivity. In order to reduce the effect of the externally applied magnetic field in the quadrupole, different magnetic materials have been considered as a shielding structure iron Fe-37, soft iron Armco(TM), Amumetal(TM) sheets. The present work describes a solution to shielding quadrupole mass spectrometers against strong magnetic fields giving an introduction to magnetic shield design, by means of finite element calculations, taking into account many factors such as the material used, the length and thickness of the shield, and the effects of openings. To prove the efficiency of the shielding system, the hydrogen signal from the quadrupole instrument has been monitored. The intensity and the direction of the magnetic field with respect to the quadrupole head axes have been varied. Measurements of the magnetic field have been made in order to validate the calculations and an example of application of the shield design guidelines to a magnetic confined plasma device is presented and tested in situ. The principal aim of the present work is to indicate a possible approach to the problem and how to obtain a practical solution with a worthy compromise between costs and performances.

An increased power handling of rf-beam loads is required by the development of high power gyrotrons for fusion research, as well as the achievement of full capability to work under vacuum conditions, which is imposed by the use of evacuated transmission lines. New techniques were developed at IFP/CNR, leading to two prototypes. One is capable of 1 MW CW operation, while the second one is designed for precise measurements at short-pulses (0.1 s) at higher peak power (2 MW). Preliminary tests at 140 GHz, high power and long pulse (500 kW, 10 s) were performed. (c) 2005 Published by Elsevier B.V.

High power gyrotron testing at long pulses is a necessary step in the development of mm-wave systems for fusion research. For this purpose a compact calorimetric load is being developed, with low overall reflectivity (< 5%) and aiming at 1 MW-CW capabilities, after the good performances of the loads (0.5 MW, 0.5 s per pulse) installed on the 140 GHz ECRH plant of the FTU Tokamak in Frascati. Tests at the same frequency but at higher power (0.7 MW, 1 s) and longer pulses (up to 2 s at 0.5 MW) on the ASDEX-Upgrade ECRH plant showed, after repeated exposures, damages on the absorbing layer, recognized as thermal effects due to the local enhancement of incident power: the effects visible near the entrance port are explained studying the superposition (with interference) of waves reflected inside the sphere. Samples of degraded and non-degraded coating have been analyzed with various techniques, revealing changes of the substrate's physical characteristics. Measurements of absorber temperature during and after the pulse, performed with an infrared detector looking directly into the load, allowed estimates of the peak temperature and thermal properties of the coating in the real working conditions. Improvements on power deposition, geometry and cooling are proposed, to be integrated in a new load design. (C) 2003 Elsevier Science B.V. All rights reserved.