Search

Several studies have investigated the feasibility of reducing the implementation cost of base isolation. In this optic, recycled rubber–fiber-reinforced bearings (RR–FRBs) represent a suitable solution for structures in developing countries. Such devices can be produced using simple manufacturing procedures at a limited cost with respect to conventional isolators. Full-scale tests on RR–FRBs featured energy dissipation values similar to those associated with high-damping natural rubber bearings (HDRBs). Equivalent viscous damping, ranging from 10 to 15%, resulted from testing of RR–FRBs, with poor degradation after cyclic loading. On the other hand, a sensible softening response, associated with the axial–shear interaction, which is much more significant compared to that exhibited by HDRBs, was observed. As a result, the numerical description of the cyclic behavior of the RR–FRBs appears to be more challenging than that of HDRBs. In past studies, simple bilinear hysteresis models were adopted to describe the cyclic behavior of low-cost rubber bearings, thus completely neglecting the P-delta effects which significantly influence the dynamic behavior of such bearings. In this paper, advanced hysteresis numerical models, able to capture the nonlinear response of RR–FRBs, were examined and properly calibrated using a powerful optimization technique, the differential evolution algorithm. Preliminary results of the numerical analyses, performed in OpenSees, were described and compared with those of experimental tests on low-cost rubber bearings. The findings of this study represent the first step of a characterization procedure aimed to provide an accurate representation of the dynamic behavior of these particular bearings. Obviously, additional studies are needed to compare results of response history analyses with those of experimental tests for real structures on RR–FRBs. In this optic, the present paper, along with further studies, could provide a new impulse for the application of low-cost rubber-based devices in current practice.

Earthquakes threaten humanity globally in complex ways that mainly include various socioeconomic consequences of life and property losses. Resilience against seismic risks is of high importance in the modern world and needs to be sustainable. Sustainable earthquake resilience (SER) from the perspective of structural engineering means equipping the built environment with appropriate aseismic systems. Shape memory alloys (SMAs) are a class of advanced materials well suited for fulfilling the SER demand of the built environment. This article explores how this capability can be realized by the innovative SMA-based superelasticity-assisted slider (SSS), recently proposed for next-generation seismic protection of structures. The versatility of SSS is first discussed as a critical advantage for an effective SER. Alternative configurations and implementation styles of the system are presented, and other advantageous features of this high-tech isolation system (IS) are studied. Results of shaking table experiments, focused on investigating the expected usefulness of SSS for seismic protection in hospitals and conducted at the structural earthquake engineering laboratory of the University of Bonab, are then reported. SSS is compared with currently used ISs, and it is shown that SSS provides the required SER for the built environments and outperforms other ISs by benefitting from the pioneered utilization of SMAs in a novel approach.

Comprehensive methodologies based on a fully probabilistic approach (i.e., the performance-based earthquake engineering approach, PBEE), represent a refined and accurate tool for the seismic performance assessment of structures. However, those procedures are suitable for building-specific evaluations, appearing extremely time-consuming if applied at the urban scale. In the proposed contribution, simplified loss assessment procedure will be applied at the urban scale with reference to the residential building stock of the center of Potenza. After the identification of the main reinforced concrete (RC) structural typologies and the definition of specific archetype building numerical models, the direct estimation of expected annual loss (DEAL) methodology will be applied to derive the EAL (i.e., expected annual loss) of RC buildings, deriving information on the effectively seismic quality (or seismic resilience) of the aforementioned built heritage at urban scale. Similarly, the monetary losses associated with downtime are evaluated. Preliminary considerations on the socio-economic effects of seismic scenarios on the territorial scale are also proposed.

Few studies have investigated so far the collapse capacity of buildings with base-isolation. In such studies, preliminary considerations have been drawn based on a number of assumptions regarding: (i) the methodology used for assessing the collapse capacity, (ii) the collapse conditions and failure modes assumed for both superstructure and isolation system, and (iii) the numerical modeling assumptions. The main results pointed out that the collapse conditions of base-isolated buildings may occur for intensity levels slightly higher than those associated with the design earthquake. In this paper, further developments are made through the use of enhanced models for the description of the behavior of a rubber-based isolation system and the assumption of more rational collapse conditions. Collapse fragility functions, in terms of mean and dispersion values, are proposed for two archetypes representative of existing buildings retrofitted using the seismic isolation technique. The collapse margin ratio (median collapse capacity Sa,C, namely the spectral acceleration associated to a probability of exceedance equal to 50%, divided by the design spectral acceleration at the collapse prevention limit state) has been evaluated for each examined case-study. Values ranging from 1.10 to 1.45 were found.