Search

Bioresorbable polymers have been widely investigated as materials exhibiting significant potential for successful application in the fields of tissue engineering and drug delivery. Further to the ability to control degradation, surface engineering of polymers has been highlighted as a key method central to their development. Previous work has demonstrated the ability of electron beam (e-beam) technology to control the degradation profiles and bioresorption of a number of commercially relevant bioresorbable polymers (poly-l-lactic acid (PLLA), L-lactide/DL-lactide co-polymer (PLDL) and poly(lactic- co-glycolic acid (PLGA)). This work investigates the further potential of e-beam technology to impart added biofunctionality through the manipulation of polymer (PLLA) surface properties. PLLA samples were subjected to e-beam treatments in air, with varying beam energies and doses. Surface characterization was then performed using contact angle analysis, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and atomic force microscopy. Results demonstrated a significant increase in surface wettability post e-beam treatment. In correlation with this, XPS data showed the introduction of oxygen-containing functional groups to the surface of PLLA. Raman spectroscopy indicated chain scission in the near surface region of PLLA (as predicted). However, e-beam effects on surface properties were not shown to be dependent on beam energy or dose. E-beam irradiation did not seem to affect the surface roughness of PLLA as a direct consequence of the treatment. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 100A: 2223-2229, 2012. [ABSTRACT FROM AUTHOR]

Osteoporosis (OP) is one of the most prevalent bone diseases worldwide with bone fracture the major clinical consequence. The effect of OP on fracture repair is disputed and although it might be expected for fracture repair to be delayed in osteoporotic individuals, a definitive answer to this question still eludes us. The aim of this study was to clarify the effect of osteoporosis in a rodent fracture model. OP was induced in 3-month-old rats ( n = 53) by ovariectomy (OVX) followed by an externally fixated, mid-diaphyseal femoral osteotomy at 6 months (OVX group). A further 40 animals underwent a fracture at 6 months (control group). Animals were sacrificed at 1, 2, 4, 6, and 8 weeks postfracture with outcome measures of histology, biomechanical strength testing, pQCT, relative BMD, and motion detection. OVX animals had significantly lower BMD, slower fracture repair (histologically), reduced stiffness in the fractured femora (8 weeks) and strength in the contralateral femora (6 and 8 weeks), increased body weight, and decreased motion. This study has demonstrated that OVX is associated with decrease in BMD (particularly in trabecular bone) and a reduction in the mechanical properties of intact bone and healing fractures. The histological, biomechanical, and radiological measures of union suggest that OVX delayed fracture healing. © 2007 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 26:384-393, 2008 [ABSTRACT FROM AUTHOR]

Fifty-two CFLP mice had an open femoral diaphyseal osteotomy held in compression by a four-pin external fixator. The movement of 34 of the mice in their cages was quantified before and after operation, until sacrifice at 4, 8, 16 or 24 days. Thirty-three specimens underwent histomorphometric analysis and 19 specimens underwent torsional stiffness measurement. The expected combination of intramembranous and endochondral bone formation was observed, and the model was shown to be reliable in that variation in the histological parameters of healing was small between animals at the same time point, compared to the variation between time-points. There was surprisingly large individual variation in the amount of animal movement about the cage, which correlated with both histomorphometric and mechanical measures of healing. Animals that moved more had larger external calluses containing more cartilage and demonstrated lower torsional stiffness at the same time point. Assuming that movement of the whole animal predicts, at least to some extent, movement at the fracture site, this correlation is what would be expected in a model that involves similar processes to those in human fracture healing. Models such as this, employed to determine the effect of experimental interventions, will yield more information if the natural variation in animal motion is measured and included in the analysis. [Copyright &y& Elsevier]

During the process of distraction osteogenesis new bone forms and undergoes rapid remodeling. Apoptosis may be one of the regulatory mechanisms governing the removal of the redundant callus during distraction osteogenesis. A rabbit tibial lengthening model was used and lengthened at 0.7 mm/day for 3 weeks. The regenerating tissues from the distraction gap were examined for apoptotic changes by transmission electron microscopy (TEM) and the terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick end-labeling (TUNEL) method. Osteoclastic bone resorption activities were demonstrated by tartrate resistant acid phosphatase (TRAP) staining. The apoptotic cells were mainly present in the transitional regions between the fibrous tissue and the new bone in the mineralization front, and close to or on the new bone surfaces near the center of the regenerate. The TUNEL labeling was greatly reduced in the mature bone near the osteotomied bone ends. TEM examination confirmed the presence of cells with apoptotic changes at various regions of the regenerate. TRAP staining revealed that osteoclastic bone resorption activities in the regenerate were in a similar pattern of distribution to those of the TUNEL labeling. The localization of apoptotic cells at the different regions of the regenerate, accompanied by the osteoclast activities, suggest that apoptosis is closely related to bone formation and remodeling during distraction osteogenesis. [Copyright &y& Elsevier]

Abstract : Background and purpose: The addition of gold nanoparticles (GNPs) to tumours leads to an increase in dose due to their high density and energy absorption coefficient, making it a potential radiosensitiser. However, experiments have observed radiosensitisations significantly larger than the increase in dose alone, including at megavoltage energies where gold’s relative energy absorption is lowest. This work investigates whether GNPs create dose inhomogeneities on a sub-cellular scale which combine with non-linear dose dependence of cell survival to be the source of radiosensitisation at megavoltage energies. Materials and methods: Monte Carlo simulations were carried out to calculate dose in the vicinity of a single GNP on the nanoscale. The effect of this nanoscale dose distribution was then modelled for MDA-MB-231 cells exposed to 2nm GNPs, and compared to experimental results. Results: Dramatic dose inhomogeneities occur around GNPs exposed to megavoltage radiation. When analysed using the Local Effect Model, these inhomogeneities lead to significant radiosensitisation, in agreement with experimental results. Conclusions: This work suggests that GNP radiosensitisation is driven by inhomogeneities in dose on the nanoscale, rather than changes in dose over the entire cell, which may contribute to the similar radiosensitisation observed in megavoltage and kilovoltage experiments. The short range of these inhomogeneities and the variation in enhancement in different cells suggests sub-cellular localisation is important in determining GNP radiosensitisation. [Copyright &y& Elsevier]