Search

Rare earth-based coated conductors have large ac magnetization losses, which hinder their use in a variety of applications. A common way to reduce these losses is by striating the superconductor into narrow filaments by means of laser ablation. Practical superconductors also need a sufficiently thick copper stabilization. The best way of creating copper-stabilized filamentized coated conductors is still to be found. In this paper, the ac magnetization losses of differently prepared 12 mm wide coated conductors manufactured by SuperOx were measured. The samples differ in terms of thicknesses of copper stabilization (5 and 10 \mu \textm), number of filaments (from 10 to 60), and order for copper deposition (filaments produced before or after electroplating the tape). The ac loss measurements were performed at 77 K in a wide range of frequencies of the external magnetic field, which allows determining the onset of coupling currents and the importance of the coupling losses. Complementary dc measurements of the transverse resistivity between filaments help to understand the path of the coupling currents. Thanks to the variety of tested samples and operating conditions, this paper provides a direct comparison of the two striation processes in commercially available high-temperature superconductor coated conductors. [ABSTRACT FROM PUBLISHER]

First experimental observations of the ferromagnetic shielding effect in high-Tc superconducting coated conductors were carried out. Experimental results were compared to simulations calling upon finite-element calculations based on the H-formulation of Maxwell equations to model superconducting strips with ferromagnetic shields. Samples of copper-stabilized coated conductors were electroplated with nickel shields and afterwards characterized. Both externally applied oscillating transverse magnetic fields as well as transport currents were studied. Having observed promising gains with respect to the reduction of ac losses in both cases, we further investigated the potential of ferromagnetic shielding. The numerical model was able to reproduce and also predict experimental results very well and will serve as an indispensable tool to determine the potential of soft ferromagnetic materials to significantly reduce hysteretic losses. [ABSTRACT FROM AUTHOR]

In the superconducting applications, the wires are exposed to time-varying magnetic field when the current changes. This generates losses which can be minimized by reducing filament size, twisting the wire, and increasing the transverse resistivity. However, the high losses of magnesium diboride wires often arise from magnetic sheath materials, and therefore, this work presents new type of wires with nonmagnetic matrix and multi-filamentary structure. The results of AC loss measurements, in external sinusoidal magnetic field, are presented. Two MgB2 samples were measured both in two temperature ranges, as two different set-ups were used, one with fixed LHe bath temperature 4.2 K. Second one enabled operation temperatures from 23 K up to the critical temperature of 39 K. Amplitude of magnetic field of the former set-up was up to 0.8 T and frequency range was from 0.1 to 1.4 Hz. In the latter one, the maximum amplitude was 28 mT, and the frequencies were 72 and 144 Hz. The results evidenced that the superconducting filaments were uncoupled and the measurements agreed with theoretical models based on this assumption. In practice, the uncoupling was modeled so that the net current in each filament was set to zero. [ABSTRACT FROM AUTHOR]

The distributions of dc transport current in a copper stabilized mono-core YBCO coated conductor sample were compared with that of sinusoidal ac transport current, i(t) = Io · sin(wt), with frequencies up to 700 Hz. The current distribution was determined from the measurement of the magnetic field produced by the transport current using a small active area Hall probe. The ac magnetic field component perpendicular to the surface of the tape was measured to determine its variation across the tape. A triggering Data AcQuisition (DAQ) system, which had a capability of sampling frequency of up to 200 kHz, based on DAQ measuring cards was used. The current distribution at various phases within one ac transport current cycle for different frequency was studied. The change in frequency from ∼0 Hz up to 40 Hz had only a minor effect on the current distribution at any of the studied phases and the current distribution is practically the same as the one in dc regime. [ABSTRACT FROM AUTHOR]