Search

Biocompatible nanoparticles have been increasingly used in a variety of medical applications, including photodynamic therapy. Although the impact of synthesis parameters and purification methods is reported in previous studies, it is still challenging to produce a reliable protocol for the fabrication, purification, and characterization of nanoparticles in the 200-300 nm range that are highly monodisperse for biomedical applications.We investigated the synthesis of chitosan nanoparticles in the 200-300 nm range by evaluating the chitosan to sodium tripolyphosphate (TPP) mass ratio and acetic acid concentration of the chitosan solution. Chitosan nanoparticles were also crosslinked to rose bengal and incubated with human breast cancer cells (MCF-7) to test photodynamic activity using a green laser (λ = 532 nm, power = 90 mW).We established a simple protocol to fabricate and purify biocompatible nanoparticles with the most frequent size occurring between 200 and 300 nm. This was achieved using a chitosan to TPP mass ratio of 5:1 in 1% v/v acetic acid at a pH of 5.5. The protocol involved the formation of nanoparticle coffee rings that showed the particle shape to be spherical in the first approximation. Photodynamic treatment with rose bengal-nanoparticles killed ~98% of cancer cells.A simple protocol was established to prepare and purify spherical and biocompatible chitosan nanoparticles with a peak size of ~200 nm. These have remarkable antitumor activity when coupled with photodynamic treatment.

Radical polymerization is one of the most widely used methods for the synthesis of polymeric materials for biomedical applications, such as drug delivery, 3D cell culture, and regenerative medicine. Among radical polymerization reactions, thiol-ene click chemistry has shown excellent orthogonality in diverse reaction conditions. However, our preliminary investigations revealed that it fails in cell culture environment. Herein, we investigate the mechanisms by which cell culture media interfere with radical photoreactions. Three different models including free radical linear photopolymerization (N,N-dimethylacrylamide photopolymerization), free radical photohydrogelation (poly(ethylene glycol) diacrylate photohydrogelation), and thiol-ene photohydrogelation (4-arm poly(ethylene glycol)-norbornene thiol-ene photohydrogelation) were investigated. We showed that common cell culture media ingredients can interfere with radical polymerization by two different pathways; namely, radical chain transfer and radical scavenging effects. Thiol-ene photoclick hydrogelation was seriously affected by cell culture media especially under the alkaline conditions of many of them, due to the impact of deprotonation of the thiol reactant. We intend these findings to serve as a reference guide to researchers employing free radical-based molecular synthesis in cell culture settings. The nonbenign impact of media components, pH, and concentration should provide a cue for future studies that aim to prepare well-defined polymeric materials in the presence of cell culture media.

Hydrogels based on cellulose nanofibrils (CNFs) have been widely used as scaffolds for biomedical applications, however, the poor mechanical properties of CNF hydrogels limit their use as ink for 3D bioprinting in order to generate scaffolds for tissue engineering applications. In this study, a dual crosslinkable hydrogel ink composed of a poly(ethylene glycol) (PEG) star polymer and 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO)-oxidized nanocellulose fibers (CNFs) is presented. As the resulting hydrogel had low structural integrity, at first crosslinking of CNFs was introduced by Ca2+. Strong physical interactions between CNFs and Ca2+ cations allowed easy regulation of the viscosity of the inks for extrusion printing raising the solution viscosity by more than 1.5 times depending on the amount of Ca2+ added. The resulting hydrogel had high structural integrity and was further stabilized in a second step by photo crosslinking of PEG under visible light. In only a few seconds, hydrogels with Young's modulus between ∼10 and 30 kPa were obtained just by altering the CNF and Ca2+ content. 3D printed hydrogels supported fibroblasts with excellent cell viability and proliferation. The dual crosslinkable hydrogel ink herein developed is versatile, easy to prepare, and suitable for 3D printing of bioscaffolds with highly tailored viscoelastic and mechanical properties applicable in a wide range of regenerative medicines.

L-3,4-dihydroxyphenylalanine (L-DOPA) is a naturally occurring catechol that is known to increase the adhesive strength of various materials used for tissue repair. With the aim of fortifying a porous and erodible chitosan-based adhesive film, L-DOPA was incorporated in its fabrication for stronger photochemical tissue bonding (PTB), a repair technique that uses light and a photosensitiser to promote tissue adhesion. The results showed that L-DOPA did indeed increase the tissue bonding strength of the films when photoactivated by a green LED, with a maximum strength recorded of approximately 30 kPa, 1.4 times higher than in its absence. The addition of L-DOPA also did not appreciably change the swelling, mechanical and erodible properties of the film. This study showed that strong, porous and erodible adhesive films for PTB made from biocompatible materials can be obtained through a simple inclusion of a natural additive such as L-DOPA, which was simply mixed with chitosan without any chemical modifications. In vitro studies using human fibroblasts showed no negative effect on cell proliferation indicating that these films are biocompatible. The films are convenient for various surgical applications as they can provide strong tissue support and a microporous environment for cellular infusion without the use of sutures. Statement of significance Tissue adhesives are not as strong as sutures on wounds under stress. Our group has previously demonstrated that strong sutureless tissue repair can be realised with chitosan-based adhesive films that photochemically bond to tissue when irradiated with green light. The advantage of this technique is that films are easier to handle than glues and sutures, and their crosslinking reactions can be controlled with light. However, these films are not optimal for high-tension tissue regenerative applications because of their non-porous structure, which cannot facilitate cell and nutrient exchange at the wound site. The present study resolves this issue, as we obtained a strong and porous photoactivated chitosan-based adhesive film, by simply using freeze drying and adding L-DOPA.

Donor-acceptor copolymers featuring electron-deficient isoindigo units and electron-rich 3,4-ethyl-E enedioxy (EDOT) groups are presented as new materials for accumulation mode organic electrochemi ...

Photochemical tissue bonding with chitosan-based adhesive films is an experimental surgical technique that avoids the risk of thermal tissue injuries and the use of sutures to maintain strong tissue connection. This technique is advantageous over other tissue repair methods as it is minimally invasive and does not require mixing of multiple components before or during application. To expand the capability of the film to beyond just a tissue bonding device and promote tissue regeneration, in this study, we designed bioadhesive films that could also support stem cells. The films were modified with oligomeric chitosan to tune their erodibility and made porous through freeze-drying for better tissue integration. Of note, porous adhesive films (pore diameter ∼110 μm), with 10% of the chitosan being oligomeric, could retain similar tissue bonding strengths (13-15 kPa) to that of the nonporous chitosan-based adhesives used in previous studies when photoactivated. When tested in vitro, these films exhibited a mass loss of ∼20% after 7 days, swelling ratios of ∼270-300%, a percentage elongation of ∼90%, and both a tensile strength and Young's modulus of ∼1 MPa. The physical properties of the films were suitable for maintaining the viability and multipotency of bone-marrow-derived human mesenchymal stem cells over the duration of culture. Thus, these biocompatible, photoactivated porous, and erodible adhesive films show promise for applications in controlled cell delivery and regenerative medicine.

In any sustainable electrical systems, various high-voltage (HV) power apparatuses such as electrical cable, transformer etc. play a pivotal role to transfer electrical energy from the generation end to the consumer end. The degradation due to electrical stress is very unlikely to avoid in operation. Prominently, the insulation system is mostly expected to be strong enough, and its degradation always provides a constant threat to the reliable operation. Moreover, the continual deterioration can gradually lead to the complete breakdown of HV equipment. To assess the overall dielectric properties, the regular monitoring/diagnosing of electrical insulation has a paramount importance in power systems. One of the potential tools for diagnostic assessment is the tan-delta (tan δ ) measurement. Considering different aspects at various frequencies, this study elucidates a comprehensive review of tan δ measurement. First, a detailed review and explanation of multiple challenges associated with dielectric loss measurement are presented. Various dielectric losses, their contribution to tan δ , measurement techniques and their comparisons are also discussed. This study further reviews the analogy of different physical dipolar theories, modelling and a brief analysis of commercially available measurement instruments.

Bioelectronic materials based on conjugated polymers are being developed in the hope to interface with electroresponsive tissues. We have recently demonstrated that a polyaniline chitosan patch can efficiently electro-couple with cardiac tissue modulating its electrophysiology. As a promising bioelectronic material that can be tailored to different types of devices, we investigate here the impact of varying the synthesis conditions and time of the in situ polymerization of aniline (An) on the sheet resistance of the bioelectronic patch. The sheet resistance increases significantly for samples that have either the lowest molar ratio of oxidant to monomer or the highest molar ratio of dopant to monomer, while the polymerization time does not have a significant effect on the electrical properties. Conductive atomic force microscopy reveals that the patch with the lowest sheet resistance has a connected network of the conductive phase. In contrast, patches with higher sheet resistances exhibit conductive areas of lower current signals or isolated conductive islands of high current signals. Having identified the formulation that results in patches with optimal electrical properties, we used it to fabricate patches that were implanted in rats for two weeks. It is shown that the patch retains an electroactive nature, and only mild inflammation is observed with fibrous tissue encapsulating the patch.

Since the permeation of the inflammatory cytokines into hydrogel scaffolds has been shown to cause dysfunction of encapsulated cells, appropriate design strategies to circumvent this are essential. In the present work, it was hypothesized that highly crosslinked PVA-fucoidan and PVA-carrageenan hydrogels can control permeation of the trefoil-shaped inflammatory cytokine IL-1β while allowing the permeation of the globular protein albumin. PVA, fucoidan, and carrageenans were functionalized with methacrylate groups and the functionalized polymers were co-crosslinked by UV photopolymerization. The resultant hydrogels were characterized physicochemically and the release of fucoidan and carrageenans was quantified by developing a colorimetric assay, which was validated by XPS analysis. The permeability characteristics of the hydrogels were evaluated using bovine serum albumin (BSA), IgG, and IL-1β. The results demonstrated an increase in hydrogel swelling through the incorporation of the polysaccharides with minimal overall mass loss. The release studies showed hydrogel stability, where the formulations exhibited ~43% retention of fucoidan and ~60-80% retention of carrageenans consistently up to 7 days. The permeation data revealed very low permeation of IgG and IL-1β through the hydrogels, with1% permeation after 24 h, while allowing6% permeation of BSA. These data indicate that such hydrogels can be used as the basis for cytokine-protective implantable devices for clinical applications.

The organic electrochemical transistor (OECT) with a conjugated polymer as the active material is the elementary unit of organic bioelectronic devices. Improved functionalities, such as low power c ...

Interaction of conjugated polymers with liposomes is an attractive approach that benefits from both systems' characteristics such as electroactivity and enhanced interaction with cells. Conjugated polymer-liposome complexes have been investigated for bioimaging, drug delivery, and photothermal therapy. Their fabrication has largely been achieved by multistep procedures that require first the synthesis and processing of the conjugated polymer. Here, a new one step fabrication approach is reported based on in situ polymerization of a conjugated monomer precursor around liposomes. Polyaniline (PANI) doped with phytic acid is synthesized via oxidative polymerization in the presence of 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine (DOPC) vesicles to produce a conductive aqueous suspension of Liposome-PANI complexes. PANI interacts with liposomes without disrupting the bilayer as shown using differential scanning calorimetry and fluorescence quenching studies of the hydrophobic Nile red probe. The electronic conductivity of the Liposome-PANI complexes, which stems from the doped PANI accessible on the liposome surface, is confirmed using conductive atomic force microscopy and electrochemical impedance spectroscopy. Further, short-term in vitro cell studies show that the complexes colocalize with the cell membrane without reducing cell proliferation. This study presents a novel fabrication route to conductive suspensions of conjugated polymer-liposome complexes suitable for potential applications at the biointerface.

A range of chitosan–based biomaterials have recently been used to perform sutureless, laser-activated tissue repair. Laser-activation has the advantage of bonding to tissue through a non-contact, aseptic mechanism. Chitosan adhesive films have also been shown to adhere to sheep intestine strongly without any chemical modification to chitosan. In this study, we continue to investigate chitosan adhesive films and explore the impact on the tissue repair strength and tensile strength characteristics of four types of adhesive film based on chitosan with different molecular weight and degree of deacetylation. Results showed that adhesives based on chitosan with medium molecular weight achieved the highest bonding strength, tensile strength and E-modulus when compared to the other adhesives. (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

A novel chitosan adhesive film that incorporates the dye 'Rose Bengal' (RB) was used in conjunction with a green laser to repair transected rat median nerves in vivo. Histology and electrophysiological recording assessed the impact of the laser-adhesive technique on nerves. One week post-operatively, the sham-control group (laser-adhesive technique applied on un-transected nerves) conserved the average number and size of myelinated fibres in comparison to its contralateral side and electrophysiological recordings demonstrated no significant difference with un-operated nerves. Twelve weeks after the laser-adhesive anastomoses, nerves were in continuity with regenerated axons that crossed the anastomotic site.

Poly(ethylene dioxythiophene) with functional pendant groups bearing double bonds is synthesized and employed for the fabrication of electroactive hydrogels with advantageous characteristics: covalently cross-linked porous 3D scaffolds with notable swelling ratio, appropriate mechanical properties, electroactivity in physiological conditions, and suitability for proliferation and differentiation of C2C12 cells. This is a new approach for the fabrication of conductive engineered constructs.

A novel approach to induce disassembly of electroactive multilayer films fabricated by the layer by layer assembly technique is reported. Electroactive multilayer films are constructed using water soluble polythiophenes, i.e., negatively charged poly[ammonium (3-thienyl)ethoxypropanesulfonate] (SPT) and positively charged poly[3-(3′-thienyloxy)ethyltriethylammonium] (APT). “Induced” dissolution of the films in response to applied potential is investigated using a quartz crystal microbalance equipped with an electrochemical cell module (EC-QCM-D). Disassembly of the films is observed in response to three different potentials: +650, –650, and ±650 mV; however the time for dissolution varies as a function of the potential with films subject to +650 mV dissolving fully in 19 h compared to 42 h for films subject to –650 mV. These electroactive films and their controlled dissolution under applied potential represent an attractive architectural feature for bionic devices that could benefit from their conductivity and dissolution over time.

Conducting polymers (CPs) have exciting potential as scaffolds for tissue engineering, typically applied in regenerative medicine applications. In particular, the electrical properties of CPs has been shown to enhance nerve and muscle cell growth and regeneration. Hydrogels are particularly suitable candidates as scaffolds for tissue engineering because of their hydrated nature, their biocompatibility, and their tissue-like mechanical properties. This study reports the development of the fi rst single component CP hydrogel that is shown to combine both electro-properties and hydrogel characteristics. Poly(3-thiopheneacetic acid) hydrogels were fabricated by covalently crosslinking the polymer with 1,1 ′ -carbonyldiimidazole (CDI). Their swelling behavior was assessed and shown to display remarkable swelling capabilities (swelling ratios up to 850%). The mechanical properties of the networks were characterized as a function of the crosslinking density and were found to be comparable to those of muscle tissue. Hydrogels were found to be electroactive and conductive at physiological pH. Fibroblast and myoblast cells cultured on the hydrogel substrates were shown to adhere and proliferate. This is the fi rst time that the potential of a single component CP hydrogel has been demonstrated for cell growth, opening the way for the development of new tissue engineering scaffolds.

Injectable hydrogels have potential biomedical applications ranging from tissue fillers to drug delivery vehicles. This study focussed on evaluating the structure of poly(vinyl alcohol) (PVA) hydrogels of variable solid content and high molecular weight model drug release from the networks formed via either conventional photo-polymerization compared with chemical initiation of polymerization using an oxidation-reduction (redox) reaction. Swelling behaviour was characterised in water to assess the structural properties. Model drugs, FITC-Dextran, 20 kDa (FD20) and 4 kDa (FD4) were loaded in the hydrogels prior to curing and drug release studies conducted. Redox-cured hydrogels were more swollen than UV-cured systems, lost approximately 20% of their polymer mass compared to only 5% from UV-cured hydrogels and subsequently exhibited networks of larger mesh sizes. Also, networks of variable solid contents showed different structural properties with systems of higher polymer concentration exhibiting a smaller mesh size. The difference in structural properties of the networks affected release of FD20, being faster in redox-cured than UV-cured hydrogels, and slower from systems of higher solid content. Release of FD4 was faster than FD20 from networks of same solid content. This study suggested that PVA hydrogels can be cured by redox-initiation to function as a controlled delivery system for macromolecular drugs.

Poly (vinyl alcohol) (PVA) hydrogels are highly attractive for biomedical applications, especially for controlled release of drugs and proteins. Recently, degradable PVA hydrogels have been described, having the advantage that the material disappears over time from the implantation site. Herein, we report the synthesis of radiopaque degradable PVA, which gives a further advantage that the position of the hydrogel can precisely be determined by X-ray fluoroscopy. Radiopacity has been introduced by replacing 0.5% of the pendent alcohol groups on the PVA with 4-iodobenzoylchloride. This level of substitution rendered the polymer adequately radiopaque. The subsequent modification of 0.8% of the pendent hydroxyl groups with an ester acrylate functional group allowed for cross-linking of the macromers. The radiopaque hydrogels degraded over a time span of 140 days. Rheology data suggested that the macromer solutions were appropriate for injection.

Biocompatible, degradable hydrogel systems that can cure in situ following injection as a liquid are useful as a base for tissue engineering and drug delivery. In this study, poly (vinyl alcohol) (PVA) polymers were modified with degradable crosslinkers and formulated for either ultraviolet (UV) light initiation or chemical initiation using an oxidation/reduction (redox) curing method. A major objective was to compare the properties of degradable PVA hydrogels formed via two routes of curing. The effect of macromer concentration, degree of hydrolysis and functional group density on the degradation profiles was investigated. Also, since the hydrogels have been designed to be injected as a liquid for in situ curing, the effect of modified macromer solutions and degradation products on cell growth was investigated. Total degradation times ranged from approximately 20 days up to 120 days and increased in direct proportion with percent macromer. Initiation method (UV or redox) did not significantly impact on time for total degradation. While aqueous solutions of the modified macromer induced some cell growth inhibition, mainly associated with oxidative solutions, degradation products showed relatively low cell growth inhibition. Degradable PVA hydrogels tailored to produce networks with various degradation profiles can be cured by redox initiation and have potential as injectable polymers for soft-tissue engineering and drug delivery.

A novel chitosan adhesive film that incorporates the dye 'Rose Bengal' (RB) was used in conjunction with a green laser to repair transected rat median nerves in vivo. Histology and electrophysiological recording assessed the impact of the laser-adhesive technique on nerves. One week post-operatively, the sham-control group (laser-adhesive technique applied on un-transected nerves) conserved the average number and size of myelinated fibres in comparison to its contralateral side and electrophysiological recordings demonstrated no significant difference with un-operated nerves. Twelve weeks after the laser-adhesive anastomoses, nerves were in continuity with regenerated axons that crossed the anastomotic site.

Photochemical tissue bonding (PTB) using rose bengal (RB) in conjunction with light is an alternative technique to repair tissue without suturing. It was recently demonstrated that laser-irradiated chitosan films, incorporating RB, bonded firmly to calf intestine in vitro. It is thus required to investigate the possible cytotoxic effects of the RB-chitosan adhesive on cells before testing its application to in vivo models.Adhesive films, based on chitosan and containing ~0.1 wt% RB were fabricated. Their cytotoxicity was assessed by growing human and murine fibroblasts either in media in which adhesive strips had been incubated, or directly on the adhesive. The adhesive was either laser-irradiated or not. Cells were stained after 48 hours with Trypan blue and the number of live and dead cells was recorded for cell viability.Murine and human fibroblasts grew confluent on the adhesives with no apparent morphological changes or any exclusion zone. Cell numbers of murine fibroblasts were not significantly different when cultured in media that was extracted from irradiated (86 ± 7%) and non-irradiated adhesive (89 ± 4%). A similar result was obtained for the human fibroblasts.These findings support that the RB-chitosan films induced negligible toxicity and growth retardation in murine and human fibroblasts.