Search

BackgroundPre-exposure prophylaxis (PrEP) against HIV infection is a new approach that involves the prophylactic use of the anti-HIV drug Truvada (tenofovir disoproxil fumarate [TDF] and emtricitabine [FTC]) by people not infected with HIV. ObjectiveThe objective of this investigator-initiated clinical study of PrEP was to evaluate the incidence of HIV and sexually transmitted infection (STI), safety and efficacy of PrEP in PrEP users, and their compliance with PrEP medication. The social, medical, and economic benefits of PrEP in Japan was assessed. MethodsThis single-center feasibility study of PrEP was conducted at the National Center for Global Health and Medicine, Tokyo, Japan, where a cohort of men who have sex with men without HIV was established in January 2017. This single-arm interventional study compared the efficacy and safety of PrEP in a single group of men who have sex with men who participated in PrEP cohort studies. For reference, the cohort study participants who did not participate in the PrEP study were included for comparison. Blood samples were collected for storage at baseline and clinic visits at 1, 3, and 6 months after starting PrEP and every 3 months thereafter. The participants were administered with 1 tablet of Truvada once daily as PrEP. They underwent blood and anal swab tests 1 and 3 months after starting PrEP and then HIV and STI infection assessments at 3-month intervals. Blood samples were centrifuged at the AIDS Clinical Center Laboratory. PrEP safety was evaluated by monitoring serum creatinine levels for symptoms of renal function disorders. The primary end point was the incidence of HIV in PrEP users (100 person-years). The secondary end points were the incidence of STI in PrEP users (100 person-years), incidence of adverse events caused by Truvada, frequency of high-risk sexual activity, and adherence to periodic visits and medication. ResultsThe study protocol was reviewed and approved by the certified review board of the National Center for Global Health and Medicine (NCGM-C-003129-03) on April 20, 2020. Changes to the study plan were submitted for review by the certified review board and approved before implementation. Recruitment was completed on March 28, 2019, and the study was completed (last adult participant and last time point) on March 31, 2021. The data were analyzed, and the main results of the study have been published in a peer-reviewed journal. ConclusionsThe findings indicated that PrEP is a highly effective and feasible strategy against HIV infection in terms of prophylactic response, retention, and compliance. Trial RegistrationUMIN Clinical Trials Registry UMIN000031040; https://tinyurl.com/3msdkeb8 and Japan Registry of Clinical Trials jRCTs031180134; https://tinyurl.com/2p88mhyr International Registered Report Identifier (IRRID)RR1-10.2196/50919

Our recent results on the synthesis and properties of a novel family of polysilsesquioxanes having oligothiophenes were reviewed. The polymers anchored on SiO2 or ITO substrates showed excellent mechanical hardness due to the formation of a three-dimensional siloxane network structure and chemical linkage between polymer and the surface of metal-oxide substrates. Optical, electrochemical, and electrical properties of polymers were also investigated.

Transplantation outcomes are affected by the increase in rejection associated with ischemia reperfusion injury (IRI). Fractalkine (FKN), a chemokine for recruitment of CX3CR1+ leukocytes, contributes to the pathogenesis of various inflammatory diseases. Herein, we evaluated the importance of the FKN-CX3CR1 axis during IRIrelated rejections using a mouse heterotopic heart transplantation model. FKN expression and graft survival was compared between wild-type C57BL/6 recipients transplanted with BALB/c hearts preserved for 8 (WT-IRI) and 0.5 h (WT-control) at 4°C. Graft survival of WTIRI was shorter than that of WT-control. FKN was expressed on the vascular endothelium in WT-IRI allografts, but minimally in WT-control. The role of the FKN-CX3CR1 axis in IRIrelated rejection was directly investigated using the transplant model with CX3CR1-deficient recipients (CX3CR1 KO-IRI) or treatment with anti-mouse FKN monoclonal antibodies. Graft survival of CX3CR1 KO-IRI was longer than that of WT-IRI; antibody treatment prolonged graft survival. The contribution of CX3CR1+ monocytes to IRI-related rejection was evaluated by adoptive transfer to CX3CR1 KO-IRI. Adoptive transfer of CX3CR1+ monocytes attenuated the effect of prolonged graft survival in CX3CR1 KO-IRI. Overall, the FKN-CX3CR1 axis plays a major role during IRI-related rejection; its blockade has the potential to improve the outcomes of deceased donor transplantation. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the mechanical properties of contemporary heat-treated nickel-titanium (NiTi) rotary instruments used in the single-length technique [ProTaper Next (PTN), HyFlex EDM (EDM), and JIZAI (JZ)]. Bending loads, cyclic fatigue resistance, torque/force values and canal-centering ratios were evaluated for the three instruments and a non-heat-treated experimental NiTi instrument with the same geometry as JZ (nJZ). EDM and JZ exhibited significantly lower bending load and more cycles to failure compared with nJZ and PTN (p<0.05). PTN and JZ exhibited significantly better centering ability than nJZ and EDM (p<0.05). JZ and nJZ generated significantly smaller upward force and maximum torque than PTN and EDM (p<0.05). Under the present experimental condition, JZ exhibited flexibility and cyclic fatigue resistance comparable to EDM, better maintained the canal curvature than the other instruments, and generated smaller torque and screw-in force than PTN and EDM. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the influence of a post-machining thermal treatment on canal-centering ability and torque/force generation of reciprocating nickel-titanium instruments. Simulated J-shaped resin canals were prepared with reciprocating instruments sharing identical geometric architecture and with/without post-machining thermal treatment (Reciproc Blue/Reciproc, VDW, Munich, Germany). Using an original automated root canal instrumentation and torque/force analyzing device, files were operated in a combination of reciprocation and up-and-down motion, and torque/force values were monitored. Canal-centering ratios were measured after superimposition of pre- and post-instrumentation images. Compared with Reciproc, Reciproc Blue showed a significantly lower canal-centering ratio (i.e., less deviation; p<0.05) at 0-1 mm from the apex and generated a significantly smaller upward maximum vertical force (p<0.05). Under standardized conditions using the automated device, Reciproc Blue showed better canal-centering ability and reduced screw-in forces than Reciproc, indicating that the post-machining thermal treatment confers superior performance to reciprocating nickel-titanium instruments. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate cyclic fatigue resistance and bending properties and torque/force generation of WaveOne Gold (WOG) Primary in comparison with WaveOne (WO) Primary and Reciproc (RE) R25. A cyclic fatigue test revealed that the WOG Primary took significantly longer time to fracture compared with the WO Primary (p<0.05). The WOG Primary had the smallest load values at a deflection of 0.5 and 2 mm (p<0.05), as measured with a cantilever bending test. Torque/force measurement demonstrated that maximum upward force and maximum counterclockwise torque values in the WOG Primary were significantly lower than those in the RE R25 (p<0.05). Under the present experimental condition, the WOG Primary showed a higher cyclic fatigue resistance compared with the WO Primary, a higher flexibility compared with the WO Primary and RE R25, and generated a significantly lower maximum torque compared with the RE R25. [ABSTRACT FROM AUTHOR]

This study aimed to compare the mechanical properties of differently-tapered EndoWave nickel-titanium endodontic rotary instruments (size #30/0.04 taper and #30/0.06 taper; Group 0.04 and 0.06, respectively). Torsional and bending properties were evaluated with the cyclic fatigue test and the cantilever bending test, respectively. Canal transportation was assessed following instrumentation of curved canals in resin blocks. Torque and apical force during instrumentation were determined using an automated instrumentation and torque/force analyzing device. The number of cycles to fracture was Group 0.04>Group 0.06 (p<0.05). The bending load values were Group 0.06>Group 0.04 (p<0.05). Group 0.04 better maintained the original canal shape compared with Group 0.06. The median clockwise torque value was Group 0.06>Group 0.04 (p<0.05), whereas no significant differences were detected in the median counterclockwise torque and apical force values (p>0.05). Under the present experimental condition, 0.04- and 0.06-tapered EndoWave instruments exhibited different mechanical properties. [ABSTRACT FROM AUTHOR]

This study aimed to investigate mechanical properties related to flexibility and fracture resistance of controlled memory wiremanufactured nickel-titanium rotary glide path files [HyFlex EDM Glide Path File (EDM) and HyFlex GPF (GPF)]. Scout RaCe (RaCe) served as control. Bending loads, torsional/cyclic fatigue resistance, and screw-in forces were measured. EDM showed a significantly larger torque at fracture, a longer time to cyclic fracture in reciprocation and a larger screw-in force compared with GPF and RaCe. GPF showed significantly lower bending loads and higher angular deflection values than EDM and RaCe, and a significantly longer time to cyclic fracture than RaCe. The time to cyclic fracture was significantly longer in reciprocation compared with continuous rotation in EDM and GPF. It can be concluded that EDM and/or GPF showed higher flexibility and cyclic/torsional fatigue resistance compared with RaCe; and that reciprocation conferred better cyclic fatigue resistance to EDM and GPF. [ABSTRACT FROM AUTHOR]

Polysilsesquioxanes were obtained by hydrolysis of viologens having one or two triethoxysilyl groups, followed by their polycondensation, and anchored on the surface of an ITO electrode. The electrochromic properties of the polysilsesquioxanes were investigated and its component was optimized to enhance the cycle lifetime. [ABSTRACT FROM AUTHOR]