Search

Martina Trentini,1,* Ugo D’Amora,2,* Alfredo Ronca,2 Luca Lovatti,2 José Luis Calvo-Guirado,3 Danilo Licastro,4 Simeone Dal Monego,4 Lucia Gemma Delogu,5 Mariusz R Wieckowski,6 Shlomo Barak,7 Oleg Dolkart,7 Barbara Zavan1 1Translational Medicine Department, University of Ferrara, Ferrara, 44121, Italy; 2Institute of Polymers, Composites and Biomaterials - National Research Council (IPCB-CNR), Naples, 80125, Italy; 3Faculty of Health Sciences, Universidad Autonoma de Chile, Santiago de Chile, 7500912, Chile; 4AREA Science Park, Trieste, 34149, Italy; 5Biomedical Science Department University of Padova, Padova, Italy; 6Nencki Institute of Experimental Biology, Polish Academy of Sciences, Warsaw, Poland; 7Magdent B.S.R. 3, Bnei Brak, Tel Aviv, Israel*These authors contributed equally to this workCorrespondence: Alfredo Ronca; Barbara Zavan, Email alfredo.ronca@cnr.it; barbara.zavan@unife.itIntroduction: In the process of bone regeneration, a prominent role is played by macrophages involved in both the initial inflammation and the regeneration/vascularization phases, due to their M2 anti-inflammatory phenotype. Together with osteoclasts, they participate in the degradation of the bone matrix if the inflammatory process does not end. In this complex scenario, recently, much attention has been paid to extracellular communication mediated by nanometer-sized vesicles, with high information content, called exosomes (EVs). Considering these considerations, the purpose of the present work is to demonstrate how the presence of a pulsed electromagnetic field (PEMF) can positively affect communication through EVs.Methods: To this aim, macrophages and osteoclasts were treated in vitro with PEMF and analyzed through molecular biology analysis and by electron microscopy. Moreover, EVs produced by macrophages were characterized and used to verify their activity onto osteoclasts.Results: The results confirmed that PEMF not only reduces the inflammatory activity of macrophages and the degradative activity of osteoclasts but that the EVS produced by macrophages, obtained from PEMF treatment, positively affect osteoclasts by reducing their activity.Discussion: The co-treatment of PEMF with M2 macrophage-derived EVs (M2-EVs) decreased osteoclastogenesis to a greater degree than separate treatments. Keywords: PEMF, exosomes, macrophages, bone, osteoclast

Background: In the case of a degenerated intervertebral disc (IVD), even though spinal fusion has provided good short-term clinical results, an alteration of the spine stability has been demonstrated by long-term studies. In this context, different designs of IVD prostheses have been proposed as alternative to spinal fusion. However, over the past few years, much of the recent research has been devoted to IVD tissue engineering, even if several limitations related to the complex structure of IVD are still presented.Purpose/Aim: Accordingly, the aim of the current paper was to develop a strategy in designing customised multiphasic nucleus/annulus scaffolds for IVD tissue engineering, benefiting from the great potential of reverse engineering, additive manufacturing and gels technology.Materials and Methods: The device consisted of a customised additive-manufactured poly(ε-caprolactone) scaffold with tailored architectural features as annulus and a cell-laden collagen-low molecular weight hyaluronic acid-based material as nucleus with specific rheological and functional properties. To this aim, injectability and viscoelastic properties of the hydrogel were analyzed. Furthermore, a mechanical and biological characterization of cell-laden multiphasic nucleus/annulus scaffold was performed.Results and Conclusions: Analyses on the developed devices demonstrated appropriate viscoelastic and mechanical properties. As evidenced by rheological tests, the hydrogel showed a shear-thinning behaviour, supporting the possibility to inject the material. The mechanical characterization highlighted a compressive modulus which falls in the range of lumbar discs, with the typical initial J-shaped stress–strain curve of natural IVDs. Furthermore, preliminary biological tests showed that human mesenchymal stem cells were viable over the culture period. [ABSTRACT FROM AUTHOR]

The main driving idea of the present study was the comparison between two different chemical modifications of hyaluronic acid (HA) followed by the development of nanocomposite hydrogels directly in situ by biomineralization of photocrosslinkable HA polymers through sol-gel synthesis. In this way, it has been possible to overcome some limitations due to classical approaches based on the physical blending of inorganic fillers into polymer matrix. To this aim, methacrylated and maleated HA, synthesized with similar degree of substitution (DS) were compared in terms of mechanical and physico-chemical properties. The success of in situ biomineralization was highlighted by reflect Fourier transform infrared spectroscopy and thermogravimetric analysis. Furthermore, mechanical characterization demonstrated the reinforcing effect of inorganic fillers evidencing a strong correlation with DS. The swelling behavior resulted to be correlated with filler concentration. Finally, the cytotoxicity tests revealed the absence of toxic components and an increase of cell proliferation over culture time was observed, highlighting these bio-nanocomposite hyaluronan derivatives as biocompatible hydrogel with tunable properties. [ABSTRACT FROM AUTHOR]

The bioactivity of sol-gel synthesized poly(ε-caprolactone) (PCL)/TiO2 or poly(ε-caprolactone)/ZrO2 particles was already known. In designing innovative 2D composite substrates for hard-tissue engineering, the possibility to embed PCL/TiO2 or PCL/ZrO2 hybrid fillers into a PCL matrix was previously proposed. In the present study, the potential of 3D fiber-deposition technique to design morphologically controlled scaffolds consisting of PCL reinforced with PCL/TiO2 or PCL/ZrO2 hybrid fillers was demonstrated. Finite element analysis was initially carried out on 2D substrates to find a correlation between the previously obtained results from the small punch test and the Young's modulus of the materials, whilst mechanical and biological tests were suitably performed on rapid prototyped scaffolds to assess the effects of the inclusion of the hybrid fillers on the performances of the 3D porous structures. The role of the inclusion of the hybrid fillers in improving the compressive modulus (about 90 MPa) and the cell viability/proliferation was demonstrated. POLYM. COMPOS., 34:1413-1417, 2013. © 2013 Society of Plastics Engineers [ABSTRACT FROM AUTHOR]

Magnetic scaffolds for bone tissue engineering based on a poly(ε-caprolactone) (PCL) matrix and iron oxide (Fe3O4) magnetic nanoparticles were designed and developed through a three-dimensional (3D) fiber-deposition technique. PCL/Fe3O4 scaffolds were characterized by a 90/10 w/w composition. Tensile and magnetic measurements were carried out, and nondestructive 3D imaging was performed through microcomputed tomography (Micro-CT). Furthermore, confocal analysis was undertaken to investigate human mesenchymal stem cell adhesion and spreading on the PCL/Fe3O4 nanocomposite fibers. The results suggest that nanoparticles mechanically reinforced the PCL matrix; the elastic modulus and the maximum stress increased about 10 and 30%, respectively. However, the maximum strain decreased about 50%; this suggested an enhanced brittleness. Magnetic results evidenced a superparamagnetic behavior for these nanocomposite scaffolds. Micro-CT suggested an almost uniform distribution of nanoparticles. Confocal analysis highlighted interesting results in terms of cell adhesion and spreading. All of these results show that a magnetic feature could be incorporated into a polymeric matrix that could be processed to manufacture scaffolds for advanced bone tissue engineering and, thus, provide new opportunity in terms of scaffold fixation and functionalization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 [ABSTRACT FROM AUTHOR]

A basic approach toward the design of three-dimensional (3D) rapid prototyped magnetic scaffolds for hard-tissue regeneration has been proposed. In particular, 3D scaffolds consisting of a poly(ε-caprolactone) (PCL) matrix and iron oxide (Fe3O4) or iron-doped hydroxyapatite (FeHA) nanoparticles were fabricated through a 3D fibre deposition technique. As a first approach, a polymer to nanoparticle weight ratio of 90/10 (wt/wt) was used. The effect of the inclusion of both kinds of nanoparticles on the mechanical, magnetic, and biological performances of the scaffolds was studied. The inclusion of Fe3O4 and FeHA nanoparticles generally improves the modulus and the yield stress of the fibres if compared to those of neat PCL, as well as the modulus of the scaffolds. Micro-computed tomography has confirmed the possibility to design morphologically-controlled structures with a fully interconnected pore network. Magnetisation analyses performed at 37°C have highlighted M-H curves that are not hysteretic; values of saturation magnetisation (Ms) of about 3.9 emu/g and 0.2 emu/g have been evaluated for PCL/Fe3O4 and PCL/FeHA scaffolds, respectively. Furthermore, results from confocal laser scanning microscopy (CLSM) carried out on cell-scaffold constructs have evidenced that human mesenchymal stem cells (hMSCs) better adhered and were well spread on the PCL/Fe3O4 and PCL/FeHA nanocomposite scaffolds in comparison with the PCL structures. [ABSTRACT FROM PUBLISHER]