Search

Recently, high aspect ratio materials like nanofibers with outstanding mechanical properties have been developed and used to improve the mechanical characteristics of construction materials. However, despite the excellent results obtained in asphalt binder modification, only a few types of polymeric nanofibers have been used for this purpose. In this sense, polyacrylonitrile has good thermal and mechanical characteristics to maintain the shape at the typical temperatures the asphalt is heated.This study evaluates the effect of electrospun polyacrylonitrile (PAN) nanofibers on the rutting resistance and fatigue parameters of asphalt binders. For this, fibers with an average diameter of 1.3 µm were prepared and randomly dispersed into neat PG 64–22 asphalt binder. Subsequently, a dynamic shear rheometer (DSR) was used to determine G*/sin δ, Jnr, R3.2, and Nf.In the range studied, Jnr3.2 showed a reduction of up to 35%, and the elastic recovery increased up to 4.5 times compared to the reference material. It was observed that the PAN nanofibers increased the fatigue resistance of asphalt binder at temperatures when the material is predominantly viscoelastic. These results show a promising new application of PAN nanofibers to improve the performance of asphalt pavements.

Polypyrrole adhesion to indium–tin oxide electrodes was improved by adding pre-hydrolyzed alkoxysilanes to the electrodeposition media. The pyrrole oxidation and film growth rates were studied by potentiostatic polymerization in acidic media. The morphology and thickness of the films were studied by contact profilometry and surface-scanning electron microscopy. The bulk and surface semiquantitative chemical composition was studied by Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Finally, the adhesion was studied by scotch-tape adhesion test, where both alkoxysilanes showed a significant improvement in adhesion. We proposed a hypothesis for the improvement in adhesion, that involves the formation of siloxane material as well as in situ surface modification of the transparent metal oxide electrode.

Polyethylene terephthalate (PET) waste has become a major challenge for the conservation of the environment due to difficult degradation. For this reason, it is important to develop new recycling strategies for reusing this waste. In this work, the electrospinning technique was used to synthesize composite nanofibers of polyvinylpyrrolidone (PVP), recycling PET (RPET) that was obtained from the chemical recycling of postconsumer PET with glycolysis and styrene (ST) as a crosslinking agent. The polymer solutions were analyzed by viscosity and frequency sweeping, while the composite nanofibers were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis/differential scanning calorimetry (TGA/DSC), and nanoindentation to compare their properties. The PVP nanofibers presented an average diameter of 257 nm; the RPET/PVP and RPET/PVP/ST composite nanofibers had average diameters of 361 nm and 394 nm, respectively; and the modulus of elasticity and hardness of the RPET/PVP/ST composite nanofibers were 29 and 20 times larger, respectively, than those of the PVP nanofibers. With the synthesis of these composite nanofibers, a new approach to PET recycling is presented.

A highly sustainable method for the preparation of supported iron oxide and copper nanoparticles (NPs) on a biomass-derived carbon by solvent-free mechanochemical process is reported. In-situ mechanochemically obtained extracts from orange peel could behave as a green reducing agent, allowing the formation of Cu metal nanoparticles as well as generating a magnetic phase (magnetite) in the systems via partial Fe3+ reduction. At the same time, orange peel residues also served as template and carbon source, adding oxygen functionalities, which were found to benefit the catalytic performance of mechanochemically synthesized nanomaterials. The series of magnetic Cu-Fe@OP were tested in the oxidation of trans-ferulic acid towards vanillin, remarkably revealing a maximum vanillin yield of 82% for the sample treated at 200 °C.

We report a new class of polyacrylonitrile (PAN)-based Co-N-doped carbon materials that can act as suitable catalyst for oxygen evolution reactions (OER). Different Co loadings were mechanochemically added into post-consumed PAN fibers. Subsequently, the samples were treated at 300 °C under air (PAN-A) or nitrogen (PAN-N) atmosphere to promote simultaneously the Co3O4 species and PAN cyclization. The resulting electrocatalysts were fully characterized and analyzed by X-ray diffraction (XRD) and photoelectron spectroscopy (XPS), transmission (TEM) and scanning electron (SEM) microscopies, as well as nitrogen porosimetry. The catalytic performance of the Co-N-doped carbon nanomaterials were tested for OER in alkaline environments. Cobalt-doped PAN-A samples showed worse OER electrocatalytic performance than their homologous PAN-N ones. The PAN-N/3% Co catalyst exhibited the lowest OER overpotential (460 mV) among all the Co-N-doped carbon nanocomposites, reaching 10 mA/cm2. This work provides in-depth insights on the electrocatalytic performance of metal-doped carbon nanomaterials for OER.

In this study, the co-synthesis of TiO2 and Cu metallic nanoparticles obtained via one-pot cost-efficient hydrothermal process has been addressed. Different nanocatalysts with Cu contents were characterized by X-ray diffraction, nitrogen porosimetry, scanning electron microscopy, and transmission electron microscopy. The TiO2 and Cu metallic nanoparticles were synthesized with copper loading up to one (Cu/Ti atomic ratio). Synthesized catalysts exhibited pore sizes in the mesoporous range and high surface areas above 150 m2/g. The particle size for TiO2 presented a homogeneous distribution of approximately 8 nm, moreover, Cu nanoparticles varied from 12 to >100 nm depending on the metal loading. The nanostructured materials were successfully tested in the conversion of trans-ferulic acid into vanillin under sustainable conditions, achieving the best performance for 0.3 Cu/Ti atomic ratio (70% vanillin yield).

In this work we analyse the global soccer player transfer market providing a network approach that takes into account both the number of transfers and the related costs for football players in the world market. We propose a community detection methodology that considers different features of the network. We cluster countries according to similarities in their roles in the transfer market and to the presence of indirect connections due to common neighbours. Numerical results show a strict relation between the composition of clusters and the economic value of the football leagues of different countries. Indeed, we observe that, on average, leagues with a similar economic value belongs to the same cluster. The analysis has been also extended providing a comparison based on the world trade network. We observe that prominent European players in the economic trades are also relevant in the soccer transfer network. [ABSTRACT FROM AUTHOR]

Polypyrrole adhesion to indium–tin oxide electrodes was improved by adding pre-hydrolyzed alkoxysilanes to the electrodeposition media. The pyrrole oxidation and film growth rates were studied by potentiostatic polymerization in acidic media. The morphology and thickness of the films were studied by contact profilometry and surface-scanning electron microscopy. The bulk and surface semiquantitative chemical composition was studied by Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. Finally, the adhesion was studied by scotch-tape adhesion test, where both alkoxysilanes showed a significant improvement in adhesion. We proposed a hypothesis for the improvement in adhesion, that involves the formation of siloxane material as well as in situ surface modification of the transparent metal oxide electrode. [ABSTRACT FROM AUTHOR]

Background Bipolar disorder is highly prevalent and consists of biphasic recurrent mood episodes of mania and depression, which translate into altered mood, sleep and activity alongside their physiological expressions. Aims The IdenTifying dIgital bioMarkers of illnEss activity and treatment response in BipolAr diSordEr with a novel wearable device (TIMEBASE) project aims to identify digital biomarkers of illness activity and treatment response in bipolar disorder. Method We designed a longitudinal observational study including 84 individuals. Group A comprises people with acute episode of mania (n = 12), depression (n = 12 with bipolar disorder and n = 12 with major depressive disorder (MDD)) and bipolar disorder with mixed features (n = 12). Physiological data will be recorded during 48 h with a research-grade wearable (Empatica E4) across four consecutive time points (acute, response, remission and episode recovery). Group B comprises 12 people with euthymic bipolar disorder and 12 with MDD, and group C comprises 12 healthy controls who will be recorded cross-sectionally. Psychopathological symptoms, disease severity, functioning and physical activity will be assessed with standardised psychometric scales. Physiological data will include acceleration, temperature, blood volume pulse, heart rate and electrodermal activity. Machine learning models will be developed to link physiological data to illness activity and treatment response. Generalisation performance will be tested in data from unseen patients. Results Recruitment is ongoing. Conclusions This project should contribute to understanding the pathophysiology of affective disorders. The potential digital biomarkers of illness activity and treatment response in bipolar disorder could be implemented in a real-world clinical setting for clinical monitoring and identification of prodromal symptoms. This would allow early intervention and prevention of affective relapses, as well as personalisation of treatment.

This article discusses the case of a 39-year-old woman who presented with secondary amenorrhea, hirsutism, and clitoromegaly. Ultrasound examination revealed a unilateral solid rounded hypoechoic lesion within the right ovary, which was later confirmed to be a Leydig cell tumor. Leydig cell tumors are rare, usually benign, and often associated with hirsutism and virilization. The tumor in this case displayed characteristics consistent with Leydig cell tumors, including small size, regular margins, and moderate to high vascularization. The patient underwent a conservative surgical treatment to preserve fertility, and her testosterone levels returned to normal after the surgery. [Extracted from the article]

Polyethylene terephthalate (PET) waste has become a major challenge for the conservation of the environment due to difficult degradation. For this reason, it is important to develop new recycling strategies for reusing this waste. In this work, the electrospinning technique was used to synthesize composite nanofibers of polyvinylpyrrolidone (PVP), recycling PET (RPET) that was obtained from the chemical recycling of postconsumer PET with glycolysis and styrene (ST) as a crosslinking agent. The polymer solutions were analyzed by viscosity and frequency sweeping, while the composite nanofibers were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis/differential scanning calorimetry (TGA/DSC), and nanoindentation to compare their properties. The PVP nanofibers presented an average diameter of 257 nm; the RPET/PVP and RPET/PVP/ST composite nanofibers had average diameters of 361 nm and 394 nm, respectively; and the modulus of elasticity and hardness of the RPET/PVP/ST composite nanofibers were 29 and 20 times larger, respectively, than those of the PVP nanofibers. With the synthesis of these composite nanofibers, a new approach to PET recycling is presented. [ABSTRACT FROM AUTHOR]