Search

The paper describes observers using model reference adaptive system for sensorless induction motor drive with the pulse width modulator and the direct torque control under the circumstances of incorrect information of induction motor parameters. An approximation based on the definition of the Laplace transformation is used to obtain initial values of the parameters. These values are utilized to simulate sensorless control structures of the induction motor drive in Matlab-Simulink environment. Performance comparison of two typical observers is carried out at different speed areas and in presence of parameter uncertainty. A laboratory stand with the induction motor drive and load unit is set up to verify the properties of observers. Experimental results confirm the expected dynamic properties of selected observer.

Induction motors are widely used in an industry and it is necessary to improve control methods for induction motors to increase the efficiency of them. In this paper, sliding mode controllers are proposed instead of traditional PI controllers in vector control of induction motor drives. Moreover, rotor speed is estimated by a sliding mode observer. In addition, the robustness of control and observer algorithms are also proved by Lyapunov’s criterion. The experiments are obtained in different speed changes of an induction motor drive. These experimental results confirm the dynamic properties of a sensorless sliding mode control of an induction motor drive.

The paper describes speed estimators for a speed sensorless induction motor drive with the direct torque and flux control. However, the accuracy of the direct torque control depends on the correct information of the stator resistance, because its value varies with working conditions of the induction motor. Hence, a stator resistance adaptation is necessary. Two techniques were developed for solving this problem: model reference adaptive system based scheme and artificial neural network based scheme. At first, the sensorless control structures of the induction motor drive were implemented in Matlab-Simulink environment. Then, a comparison is done by evaluating the rotor speed difference. The simulation results confirm that speed estimators and adaptation techniques are simple to simulate and experiment. By comparison of both speed estimators and both adaptation techniques, the current based model reference adaptive system estimator with the artificial neural network based adaptation technique gives higher accuracy of the speed estimation.

This paper deals with a novel method to achieve the effective performance of the extended Kalman filter (EKF) for the speedy estimate of an induction motor. The real coding genetic algorithm (GA) is used to optimize the components of the covariance matrix in the EKF, thus ensuring the stability and accuracy of the filter in the speed estimation. The advantage of the proposed method is less dependent on the parameters of the induction motor. The content includes the vector control model for induction motor, the speed estimation by modeling the reference frame-model reference adaptive system (RF-MRAS), the current based-model reference adaptive system (CB-MRAS), and the speed estimation with the EKF optimized by genetic algorithm. Simulative studies on the field-oriented controller (FOC) with different operating conditions are performed in Matlab Simulink when the rotor resistance changes in the current speed estimation methods. The simulation results demonstrate the efficiency of the proposed GA-EKF filter compared with other speed estimation methods of induction motors. [ABSTRACT FROM AUTHOR]

The paper deals with application of Kalman filter in induction motor drive using pulse-width modulation direct torque control (PWM-DTC). In the first part, the conventional PWM-DTC drive is described and Kalman filter is utilized to filter components of stator current vector those are assumed to be disturbed by white noise. The second part contains simulation results that are obtained in different cases of load torque, process and measurement noise covariances. The integral time absolute error (ITAE) performance index, undershoot, ripple of important quantities are used to compare the conventional drive structure and proposed drive structure with Kalman filter. The simulation results confirm the expected dynamic response of the proposed structure. [ABSTRACT FROM AUTHOR]