Search

Halide perovskite materials are excellent light harvesters that have generated enormous interest for photovoltaic technology and an increasing number of other optoelectronic applications. Very recently, their use for miniaturized chemical sensors has shown a promising room-temperature response. Here, we present some insights on the use of CsPbBr2I (CPBI) perovskites for self-powered room-temperature sensing of several environmentally and medically relevant compounds demonstrating rapid detection of down to concentrations of 1 ppm. Notably, the photocurrent of these self-powered CPBI-based devices increases under exposure to both reducing (e.g. acetone, propane) and oxidizing (e.g. NO2, O2) gas molecules and decreases rapidly upon reverting to an inert atmosphere. In situ photoluminescence (PL) analysis of the CPBI during exposure to oxidizing molecules reveals a strongly increased PL intensity and longer lifetime indicating a prevalent role of CPBI trap states in the sensing mechanism. These findings provide new insights for the engineering of perovskite-based materials for their future chemical sensing applications. [ABSTRACT FROM AUTHOR]

The open-circuit voltage ( VOC) and fill factor are key performance parameters of solar cells, and understanding the underlying mechanisms that limit these parameters in real devices is critical to their optimization. Device modeling is combined with luminescence and cell current-voltage ( I- V) measurements to show that carrier transport limitations within the cell can significantly reduce the cell voltage around the maximum power point as well as, under certain conditions, at VOC. An important consequence is that the cell terminal voltage cannot be assumed a priori to be only limited by parasitic recombination. It is demonstrated that luminescence-based measurements can be used to reconstruct cell I- V curves with removal of any transport limitation effects, which allows the contribution of recombination, shunt resistance, and series resistance on the fill factor to be clarified. Such luminescence-based measurements allow the contactless characterization of cells and cell precursor structures, and should prove highly valuable as a diagnostic tool for the development of new cell structures and large-area cells. [ABSTRACT FROM AUTHOR]

The issue of hysteresis in perovskite solar cells has now been convincingly linked to the presence of mobile ions within the perovskite layer. Here we test the limits of the ionic theory by attempting to account for a number of exotic characterization results using a detailed numerical device model that incorporates ionic charge accumulation at the perovskite interfaces. Our experimental observations include a temporary enhancement in open-circuit voltage following prolonged periods of negative bias, dramatically S-shaped current–voltage sweeps, decreased current extraction following positive biasing or “inverted hysteresis”, and non-monotonic transient behaviours in the dark and the light. Each one of these phenomena can be reproduced and ultimately explained by our models, providing further evidence for the ionic theory of hysteresis as well as valuable physical insight into the factors that coincide to bring these phenomena about. In particular we find that both interfacial recombination and carrier injection from the selective contacts are heavily affected by ionic accumulation, and are essential to explaining the non-monotonic voltage transients and S-shaped J–V curves. Inverted hysteresis is attributed to the occurrence of “positive” ionic accumulation, which may also be responsible for enhancing the stabilized open-circuit voltage in some perovskite cells. [ABSTRACT FROM AUTHOR]

We report on the prototyping and development of a highly reflective dielectric back reflector for application in thin-film solar cells. The back reflector is fabricated by Snow Globe Coating (SGC), an innovative, simple, and cheap process to deposit a uniform layer of TiO2 particles which shows remarkably high reflectance over a broad spectrum (average reflectance of 99% from 500 nm to 1100 nm). We apply the highly reflective back reflector to tandem thin-film silicon solar cells and compare its performance with conventional ZnO:Al/Ag reflector. By using SGC back reflector, an enhancement of 0.5 mA/cm2 in external quantum efficiency of the bottom solar cell and an absolute value of 0.2% enhancement in overall power conversion efficiency are achieved. We also show that the increase in power conversion efficiency is due to the reduction of parasitic absorption at the back contact; that is, the use of the dielectric reflector avoids plasmonic losses at the reference ZnO:Al/Ag back reflector. The Snow Globe Coating process is compatible with other types of solar cells such as crystalline silicon, III–V, and organic photovoltaics. Due to its cost effectiveness, stability, and excellent reflectivity above a wavelength of 400 nm, it has high potential to be applied in industry. [ABSTRACT FROM AUTHOR]