Search

Achieving nitrogen fixation in visible light-driven using metal-free and eco-friendly semiconductors at acceptable temperature and pressure still remains a big challenge. In the field of artificial photosynthesis, reported semiconductors for nitrogen fixation have large band gap around 3.0 eV and requires high temperature and pressure which results the catalytic nitrogen fixation is navigate under visible light, consume supply of global energy, and emit global greenhouse gas. In conflict this report illustrates a metal free catalyst EBCNDG with a band gap of ∼2.64 eV at room temperature and pressure indicate photocatalytic campaign toward nitrogen fixation in visible light without producing any harmful gases. The EBCNDG photocatalyst has a vacancy of high active oxygen which helps adsorb and stabilize the intermediate and increases the rate of nitrogen fixation. The EBCNDG photocatalyst was prepared by coupling of an eosin B (EB) with N-doped graphene (NDG) via amide linkage. This unique combination opens a new trial for nitrogen fixation as well as NADH regeneration under acceptable conditions using visible energy. The amount of ammonia obtained by EBCNDG is 0.513 mM and the regeneration yield of NADH is 90.3%. [ABSTRACT FROM AUTHOR]

Elevated global pollution level is the prime reason that contributes to the onset of various harmful health diseases. The products of Biginelli reaction are enormously used in the pharmaceutical industry as they have antiviral, antibacterial, and calcium channel modulation abilities. This work reports a novel eosin Y sensitized boron graphitic carbon nitride (EY‐Ben‐g‐C3N4) as a photocatalyst that efficiently produced 3,4‐dihydropyrimidine‐2‐(1H)‐one by the Biginelli reaction of benzaldehyde, urea, and methyl acetoacetate. The photocatalyst EY‐Ben‐g‐C3N4 showed a successful generation of 3,4‐dihydropyrimidine‐2‐(1H)‐one (Biginelli product) in good yield via photocatalysis which is an eco‐friendly method and has facile operational process. In addition to the production of Biginelli products, the photocatalyst also showed a remarkable NADH regeneration of 81.18%. The incorporation of g‐C3N4 with boron helps increase the surface area and the incorporation of eosin Y which is an inexpensive and non‐toxic dye, and in Ben‐g‐C3N4, enhanced the light‐harvesting capacity of the photocatalyst. The production of 3,4‐dihydropyrimidine‐2‐(1H)‐one and NADH by the EY‐Ben‐g‐C3N4 photocatalyst is attributed to the requisite band gap, high molar absorbance, low rate of charge recombination, and increased capacity of the photocatalyst to harvest solar light energy. [ABSTRACT FROM AUTHOR]

Photocatalyst‐enzyme coupled system for harnessing solar light stands out as a highly promising avenue that facilitates bio‐transformation and produces solar fuels. This study explores the integration of a metal‐free photocatalyst in the bio‐reduction of furfural to produce furfuryl alcohol. However, the bio‐reduction of furfural to produce furfuryl alcohol faces challenges due to harsh reaction conditions and expensive catalysts. Likewise, photocatalysts confront various research obstacles, including the absence of long‐lasting photogenerated charge carriers (electrons and holes), stability, and reusability. This work introduces an eco‐friendly and benign catalytic system, featuring an easily prepared photocatalyst using TBA (2,4,6‐tribromo aniline) by standard Ullman coupling. The newly designed polymeric tribromo aniline (PTBA) is cost‐effective, with outstanding light harvesting characteristics, appropriate energy band gap, and remarkably enhanced ability for transfer and migration of photo‐generated carriers. The research aims to optimize parameters for efficient conversion of furfural to produce furfuryl alcohol and also the photocatalytic production of NADH (80.08 %) from consumed NAD+. The photocatalytic efficiency was estimated by the yield percentage of this organic transformation. The absence of metals in the photocatalyst enhances sustainability, showcasing its potential in the green synthesis of furfuryl alcohol which is a valuable chemical with diverse applications. [ABSTRACT FROM AUTHOR]

The use of solar-driven semiconductor photocatalysis to solve energy and environmental issues is an intriguing and difficult subject. As a consequence, various types of photocatalysts have been developed subsequently to fulfill the requirements of photocatalysis.Since graphene was discovered, materials based on graphene have garnered considerable interest. The aloe-vera derived (ADG)/nickel oxide (NiO) nanocomposite is a notable example of a graphene derivative.The uniform structure of graphene fibre is altered by nickel oxide(NiO) which tunes its band gap and causes electronic arrangements within graphene that is requiste for photocatalysis. Herein, we have used a one-pot chemical approach to design aloe vera-derived graphene/nickel oxide nanocomposites (ADG/NiO), a novel photocatalyst that show high molar absorbance, suitable band gap of 2.68 eV, good photo-stability and reusability. Under solar light irradiation, the ADG/NiO nanocomposite exhibited remarkable photocatalytic activity. It effectively fixed nitrogen into ammonia with an apparent quantum efficiency(AQE) of 0.64% and efficiently photo-oxidized dyes. Specifically, it achieved a dye removal efficiency of 94.2% for methylene blue (MB) and 86.41% for Eosin-B, converting them into harmless inorganic species like CO2 and H2O within just 90 minutes. The cost-effective ADG/NiO nanocomposite shows significant potential as a photocatalyst activated by solar light for practical applications such as the selective generation of NH3 and the purification of industrial wastewater containing dyes. [ABSTRACT FROM AUTHOR]

A solvent‐free sulfur‐bridge‐eosin‐Y (SBE‐Y) polymeric framework photocatalyst was prepared for the first time through an in situ thermal polymerization route using elemental sulfur (S8) as a bridge. The addition of a sulfur bridge to the polymeric framework structure resulted in an allowance of the harvesting range of eosin‐Y (E‐Y) for solar light. This shows that a wider range of solar light can be used by the bridge material's photocatalytic reactions. In this context, supercharged solar spectrum: enhancing light absorption and hole oxidation with sulfur bridges. This suggests that the excited electrons and holes through solar light can contribute to oxidation–reduction reactions more potently. As a result, the photocatalyst‐enzyme attached artificial photosynthesis system developed using SBE‐Y as a photocatalyst performs exceptionally well, resulting in high 1,4‐NADH regeneration (86.81%), followed by its utilization in the exclusive production of formic acid (210.01 μmol) from CO2 and synthesis of fine chemicals with 99.9% conversion yields. The creation of more effective photocatalytic materials for environmental clean‐up and other applications that depend on the solar light‐driven absorption spectrum of inorganic and organic molecules could be one of the practical ramifications of this research. [ABSTRACT FROM AUTHOR]

Sulfur‐doped Eosin‐B (SDE‐B) photocatalysts were synthesized for the first time utilizing sublimed sulfur (S8) as a dopant in an in situ thermal copolymerization technique. Sulfur doping not only increased Eosin‐B (E‐B) absorption range for solar radiation but also improved fixation and oxygenation capabilities. The doped sulfur bridges the S‐S bond by substituting for the edge bromine of the E‐B bond. The improved photocatalytic activity of SDE‐B in the fixation and oxygenation of NAD+/NADP+ and sulfides using solar light is attributed to the photo‐induced hole of SDE‐B's high fixation and oxygenation capacity, as well as an efficient suppression of electron and hole recombination. The powerful light‐harvesting bridge system created using SDE‐B as a photocatalyst works extremely well, resulting in high NADH/NADPH regeneration (79.58/76.36%) and good sulfoxide yields (98.9%) under solar light. This study focuses on the creation and implementation of a sulfur‐doped photocatalyst for direct fine chemical regeneration and organic transformation. [ABSTRACT FROM AUTHOR]

Glucose, an abundant and renewable form of biomass, has garnered significant attention in research for its conversion into high‐value chemicals such as gluconic acid. Traditional methods for biomass transformation typically involve high energy input, elevated temperature, pressure, and costly systems. In contrast, photocatalysis emerges as a promising approach to produce organic molecules under mild conditions, harnessing energy from natural sunlight or lamps. This study presents the nitrogen‐enriched graphene with zeolite second Mobil–5 (NenG/ZSM‐5) photocatalyst, evaluated for generating high‐value chemicals (gluconic acid and leucodopaminechrome) under solar light irradiation. The NenG/ZSM‐5 photocatalyst, synthesized from nitrogen‐doped graphene and ZSM‐5, successfully converted dopamine into leucodopaminechrome (71.54 %) — a critical step in dopamine regeneration and transformed glucose into gluconic acid (85 %). The addition of ZSM‐5 to NenG provided stability and enhanced product selectivity. The outstanding performance of the NenG/ZSM‐5 photocatalyst can be attributed to its heightened solar light harvesting potential, appropriate energy band gap, and uniformly arranged π‐electron channels. This research focuses on solar conversion of glucose to gluconic acid and dopamine regeneration, with potential for further exploration in the research domain. [ABSTRACT FROM AUTHOR]

A schematic strategy is presented to overcome the problem of low photocatalytic performance of graphene. Herein, we synthesized nitrogen-doped graphene (NDG)-coupled acid fuchsin (AF) photocatalyst, i.e.; NDGCAF photocatalyst. The NDGCAF photocatalyst has excellent solar light harvesting ability, band gap suitability, and high molar extinction coefficient than the NDG photocatalyst. Due to these properties, the NDGCAF photocatalyst has the ability to oxidize aryl-vinyl into aryl-vinyl-aldehyde under the irradiation of visible light. In this context, it exhibited the utmost conversion efficiency of aryl-vinyl to aryl-vinyl-aldehyde with a good yield of 98.15%. Current research highlights the significant application of NDGCAF light-harvesting photocatalysts in the research field of organic transformations. [ABSTRACT FROM AUTHOR]

The combination of excellent electronic properties and thermal stability positions orange‐derived graphene quantum dots (GQDs) as promising materials for solar light‐based applications. Researchers are actively exploring their potential in fields such as photovoltaics, photocatalysis, optoelectronics, and energy storage. Their abundance, cost‐effectiveness, and eco‐friendly nature further contribute to their growing relevance in cutting‐edge scientific research. Furthermore, only GQDs are not much more effective in the UV‐visible region, therefore, required band gap engineering in GQDs material. In this context, we designed GQDs‐based light harvesting materials, which is active in UV‐visible region. Herein we synthesized GQDs coupled with 2,6‐diaminoanthrquninone (AQ), that is, GQDs@AQ light harvesting photocatalyst the first time for the oxidation of sulfide to sulfoxide under visible light. For the integrating reactions of sulfide in aerobic conditions under visible light by GQDs@AQ photocatalyst exhibit utmost higher photocatalytic activity than simple GQDs due to low molar extinction coefficient and slow recombination charges. The use of GQDs@AQ light harvesting photocatalyst, showed the excellent organic transformation efficiency of sulfide to sulfoxide with excellent yield (94%). The high efficiency and excellent yield of 94% indicate the effectiveness of GQDs@AQ as a photocatalyst for these specific organic transformations. [ABSTRACT FROM AUTHOR]

Aloe vera‐derived graphene (ADG) coupled system photocatalyst, mimicking natural photosynthesis, is one of the most promising ways for converting solar energy into ammonia (NH3) and nicotinamide adenine dinucleotide (NADH) that have been widely used to make the numerous chemicals such as fertilizer and fuel. In this study, we report the synthesis of the aloe vera‐derived graphene‐coupled phenosafranin (ADGCP) acting as a highly efficient photocatalyst for the generation of NH3 and regeneration of NADH from nitrogen (N2) and oxidized form of nicotinamide adenine dinucleotide (NAD+). The results show a benchmark instance for mimicking natural photosynthesis activity as well as the practical applications for the solar‐driven selective formation of NH3 and the regeneration of NADH by using the newly designed photocatalyst. [ABSTRACT FROM AUTHOR]

4-hydroxynitrobenzene (4-HNB) is a highly effective industrial pollutant that causes adverse effects to human beings. In this regard, detoxification of noxious water is utmost indispensable. Highly efficient metal-free photocatalytic degradation and reduction of 4-HNB with and without reducing agent still challenge. Additionally, for this role, largely expensive reagents that can create inauspicious impacts on the environment are utilized. Herein, we developed a '1' photocatalyst that has the excellent ability for the H2O2-mediated degradation and reductant-free reduction of 4-HNB. The '1' photocatalyst has an excellent turnover number (TON) 0.644×1020 molecules and turnover frequency (TOF) 0.0035×1020 molecules /min. [ABSTRACT FROM AUTHOR]

The solar‐driven catalytic reduction of CO2 to value‐added chemicals is under intensive investigation. The reaction pathway via *OCHO intermediate (involving CO2 adsorbed through O‐binding) usually leads to the two‐electron transfer product of HCOOH. Herein, a single‐atom catalyst with dual‐atom‐sites featuring neighboring Sn(II) and Cu(I) centers embedded in C3N4 framework is developed and characterized, which markedly promotes the production of HCHO via four‐electron transfer through the *OCHO pathway. The optimized catalyst achieves a high HCHO productivity of 259.1 µmol g−1 and a selectivity of 61% after 24 h irradiation, which is ascribed to the synergic role of the neighboring Sn(II)–Cu(I) dual‐atom sites that stabilize the target intermediates for HCHO production. Moreover, adsorbed *HCHO intermediate is detected by in situ Fourier transform infrared spectroscopy (CO stretches at 1637 cm−1). This study provides a unique example that controls the selectivity of the multi‐electron transfer mechanisms of CO2 photoconversion using heteronuclear dual‐atom‐site catalyst to generate an uncommon product (HCHO) of CO2 reduction. [ABSTRACT FROM AUTHOR]

To minimize the ever‐increasing global warming and environmental problems, the conversion of atmospheric CO2 into value‐added solar chemicals/fuels is one of the most challenging tasks. As a means to accomplish this, herein we have synthesized first time novel in situ selenium‐doped polyimide frameworks (Se‐PIFs) photocatalyst via thermal co‐polymerization approach between melem (M) and perylene 3, 4, 9, 10‐tetracarboxylic dianhydride (PTDA) along with selenium (Se) as a dopant. The Se‐PIFs photocatalyst shows outstanding photocatalytic stability and activity for high solar fuel production (HCOOH ~ formic acid) from CO2. The solar light active Se‐PIFs photocatalyst was demonstrating the ~ 10‐fold higher photo‐conversion of CO2 to formic acid with yields of 250. 6 μmol. The current work is providing a facile and scalable avenue as well as sheds light on creating a new route for in situ judicious design highly efficient Se‐PIFs photocatalyst. The outcome is a benchmark instance for the use of selenium‐doped polyimide frameworks as a highly practical and efficient solar light active photocatalyst for carrying out the selective production of formic acid from environmental CO2. [ABSTRACT FROM AUTHOR]