Search

A major challenge in building energy renovation is to cost effectively achieve notable energy savings. This paper investigates cost-effective passive energy-efficiency measures for thermal envelope retrofit of a typical Swedish multi-apartment building from the 1970s. Here, the use of different types of insulation materials for the retrofits of roof, exterior walls, and ground floor are analyzed along with changing windows and doors with varying thermal transmittance values. The cost-effectiveness analysis is based on the net present value of the investment costs of the energy-efficiently measures and the achieved energy cost saving. Different economic scenarios and renovation cases are considered in techno-economic analyses to determine the cost-effective energy-efficiency retrofit measures. The results indicate that improved windows reduce energy demand for space heating by up to 23% and yield the highest final energy savings. However, additional mineral wool roof insulation is the most cost-effective measure under all economic scenarios. This measure gave the lowest ratio of cost effectiveness of about 0.1, which was obtained under the stable scenario. The final energy savings that can be achieved in a cost-effective manner vary between 28% and 61%, depending on the economic scenario and renovation case. This analysis emphasizes the influence of different renovation cases and economic parameters on the cost effectiveness of passive energy-efficiency measures.

Floor heating and radiators are two of the most common types of hydronic heating systems used for space heating in single-family houses in cold climate regions. Notwithstanding, there are few comparative studies on indoor temperature distribution and system cost evaluations for radiators and floor heating. Furthermore, there are no aligned outcomes in terms of total heat supply for a single-family house with radiators or floor heating. In this study, the effect of building energy efficiency level and construction type, including flooring material, on the supply heating demand and transmission heat losses were studied for both radiator and floor heating systems. For this purpose, a single-family house located in Växjö, Sweden, was modeled as a case study. The heating demand was supplied with a district heating system with a similar supply temperature at 45 °C for both the radiator and floor heating system. A sensitivity analysis was also performed to assess the effect of flooring configurations on the annual supply heating demand for both conventional and passive versions of the case-study building. The results showed that the radiator-integrated building had a lower supply heating demand in comparison with the floor heating-integrated buildings. Based on the sensitivity studies, the flooring material did not have a significant influence on the supply heating demand and on the transmission heat losses in the case of the radiators. The supply heating demand was only reduced up to 3% if the flooring U-value was improved by 60%. The results also showed that refurbishment in a standard conventional building with a radiator heating system based on the passive criteria led to a 58% annual energy savings, while this amount for a building with a floor heating system was approximately 49%.

This study presents an analysis of the impacts of climate change on thermal comfort and energy performance of residential buildings in Ghana, in sub-Saharan Africa, and explores mitigation as well as adaptation strategies to improve buildings’ performance under climate change conditions. The performances of the buildings are analyzed for both recent and projected future climates for the Greater Accra and Ashanti regions of Ghana, using the IDA-ICE dynamic simulation software, with climate data from the Meteonorm global climate database. The results suggest that climate change will significantly influence energy performance and indoor comfort conditions of buildings in Ghana. However, effective building design strategies could significantly improve buildings’ energy and indoor climate performances under both current and future climate conditions. The simulations show that the cooling energy demand of the analyzed building in the Greater Accra region is 113.9 kWh/m2 for the recent climate, and this increases by 31% and 50% for the projected climates for 2030 and 2050, respectively. For the analyzed building in the Ashanti region, the cooling energy demand is 104.4 kWh/m2 for the recent climate, and this increases by 6% and 15% for the 2030 and 2050 climates, respectively. Furthermore, indoor climate and comfort deteriorate under the climate change conditions, in contrast to the recent conditions.