Search

This article reviews the spectroscopic principles related to three established satellite-based systems for global greenhouse gas monitoring, namely Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY), Greenhouse Gases Observing Satellite (GOSAT) and Orbiting Carbon Observatory (OCO) series. It reveals that the worldwide endeavor of atmospheric carbon dioxide (CO2) and other greenhouse gas measurements have not only alerted mankind about the climate hazards but also have enriched basic physical science, especially spectroscopy that need more elucidation. This review points out that the technology of remote sensing of trace gases has achieved several radically new dimensions in science research, such as the shift from in situ chemical analysis to distant spectroscopic measurements and development of space-borne hyperspectral observation systems. It has implemented fundamentally new spectroscopic techniques, namely double-pendulum interferometer and imaging spectroscopy, and executed novel statistical procedures for assessing atmospheric radiative absorption. New avenues are opened, such as implementing differential optical absorption spectroscopy from space and assessing solar-induced chlorophyll fluorescence at global level. In brief, this review highlights several new spectroscopic applications of the known physical principles that were conceptualized in course of developing the remote sensing systems for atmospheric CO2 and other greenhouse gases. [ABSTRACT FROM AUTHOR]

Remote Sensing (RS) provides significant insights for the monitoring of natural disasters like earthquakes for pre-and post-seismic precursors around the seismogenic regions. The integrated analysis of atmosphere data from satellites has been vital in this progress, providing detection of anomalies associated with the seismic activities. This study provides a comprehensive study of a statistical analysis for possible atmospheric precursors over the forth coming seismic breeding zone around the world. In this study, we have investigated Outgoing Longwave Radiation (OLR) and Relative Humidity (RH) anomalies associated with 10 large magnitude (Mw ≥ 6.5) earthquakes around the world. We examined pre-and post-seismic anomalies in OLR and RH from the data of the National Oceanic and Atmospheric Administration, Physical Sciences Laboratory (NOAA-PSL). This research confirms the existence of OLR and RH precursors as candidate parameters for large earthquakes precursors over the epicenters. The study findings indicate that the OLR and RH anomalies were evident in each of the 10 seismic events, with anomalous windows occurring between 7 and 5 days before and in few cases 2 to 3 days after the earthquake. Furthermore, this study suggests that OLR and RH hold promise as reliable space-based precursors for earthquake forecasting. The identified anomalies exhibit a notable consistency with the stress-induced activation of proxy defects at the interface between the lithosphere and atmosphere within the seismic breeding zone. [ABSTRACT FROM AUTHOR]

This document serves as a comprehensive guide to the use of remote sensing in studying climate-land interactions. It explains the interconnected relationship between climate and land, with a focus on how human activities, particularly land use practices, contribute to climate change. The document highlights the role of remote sensing in understanding the global impacts of climate change and provides valuable resources for educators to create lesson plans on the topic. It also explores specific applications of remote sensing, such as monitoring surface water storage variations and mapping land surface temperature. The document emphasizes the importance of integrating societal systems and processes into the study of climate-land interactions. It offers teaching resources for various disciplines, including environmental science, physical science, and social science, providing links to professional organizations, interactive mapping tools, and satellite imagery that can be used for educational purposes. [Extracted from the article]

Important topics in Land-Atmosphere (L-A) feedback research are water and energy balances and heterogeneities of fluxes at the land-surface and in the ABL. To target these questions, the Land-Atmosphere Feedback Observatory (LAFO) has been installed in Southwest Germany. The instrumentation allows comprehensive and high-resolution measurements from the bedrock to the lower free troposphere. Grouped in three components: atmosphere, soil and land-surface and vegetation, the LAFO observation strategy aims for simultaneous measurements in all three compartments. For that the LAFO sensor synergy contains lidar systems to measure the atmospheric key variables humidity, temperature and wind. At the land-surface eddy covariance stations are operated to record the energy distribution of radiation, sensible, latent and ground heat fluxes. With a water and temperature sensor network the soil water content and temperature is monitored in the agricultural investigation area. The observations in LAFO are organized in operational measurements and intensive observation periods (IOPs). Operational measurements aim for long timeseries dataset to investigate statistics as we present as example the correlation between mixing layer height and surface fluxes. The potential of IOPs is demonstrated with a 24 hour case study with dynamic and thermodynamic profiles with lidar as well as a surface layer observation with the scanning differential absorption lidar to relate atmospheric humidity patterns to soil water structures. Both long-term observations and IOPs are important for improving the representation of L-A feedbacks in climate and numerical weather prediction models. [ABSTRACT FROM AUTHOR]

The article discusses exploration of South-Eastern Australian coastline management. It mentions use of geospatial technology to maintain and conserve valuable coastlines; and also mentions 3D surveys of the whole beach are the ideal and provide the most information, including an estimate of the total volume of sand present; and also mentions climate change will drive long-term changes in how beaches around Australia behave.

2 Special issue statementThis article is part of the special issue "Remote sensing, modelling-based hazard and risk assessment, and management of agro-forested ecosystems". Further, risk assessment has been proven to be a valid tool to evaluate different types of risk both in the riverine (Chen et al., 2019; Lee et al., 2019) and in the forest (Blanco-Gutiérrez et al., 2020) environments: although these environments are different, risk assessment methods play an important role in both. 5 Risk assessment and management for rivers and forests Risk assessment methods can be applied to riverine environments, and river management activities can largely benefit from the use of such methods. 3 Water-related hazards and weather modelling in agriculture Water-related hazards in agriculture are particularly important and are related to variations in water availability in the form of surpluses and shortages of water. [Extracted from the article]

Annual soil moisture estimates are useful to characterize trends in the climate system, in the capacity of soils to retain water and for predicting land and atmosphere interactions. The main source of soil moisture spatial information across large areas (e.g., continents) is satellite-based microwave remote sensing. However, satellite soil moisture datasets have coarse spatial resolution (e.g., 25–50 km grids); and large areas from regional-to-global scales have spatial information gaps. We provide an alternative approach to predict soil moisture spatial patterns (and associated uncertainty) with higher spatial resolution across areas where no information is otherwise available. This approach relies on geomorphometry derived terrain parameters and machine learning models to improve the statistical accuracy and the spatial resolution (from 27km to 1km grids) of satellite soil moisture information across the conterminous United States on an annual basis (1991–2016). We derived 15 primary and secondary terrain parameters from a digital elevation model. We trained a machine learning algorithm (i.e., kernel weighted nearest neighbors) for each year. Terrain parameters were used as predictors and annual satellite soil moisture estimates were used to train the models. The explained variance for all models-years was >70% (10-fold cross-validation). The 1km soil moisture grids (compared to the original satellite soil moisture estimates) had higher correlations (improving from r2 = 0.1 to r2 = 0.46) and lower bias (improving from 0.062 to 0.057 m3/m3) with field soil moisture observations from the North American Soil Moisture Database (n = 668 locations with available data between 1991–2013; 0-5cm depth). We conclude that the fusion of geomorphometry methods and satellite soil moisture estimates is useful to increase the spatial resolution and accuracy of satellite-derived soil moisture. This approach can be applied to other satellite-derived soil moisture estimates and regions across the world. [ABSTRACT FROM AUTHOR]

Investigations at the Maya site of Ceibal, Guatemala, documented an artificial plateau, measuring 600 x 340 m in horizontal dimensions and 6 to 15 m in height. Unlike highly visible pyramids, such horizontally extensive constructions covered by the rainforest are difficult to recognize on the ground, but airborne laser scanning (LiDAR) revealed its planned form. Excavations carried out over many years provided data on its construction sequence, fill volumes, and labor investments. The initial construction of the plateau occurred around 950 B.C. when a formal ceremonial complex was built in its center. This was the period when the inhabitants of the Maya lowlands were adopting a new way of life with greater reliance on maize agriculture, full sedentism, and ceramic use. The inhabitants of areas surrounding Ceibal, who retained certain levels of residential mobility, probably participated in the construction of the plateau. In this regard, the Ceibal plateau is comparable to monumental constructions that emerged before or during the transition to agriculture or sedentism in other parts of the world. The data from Ceibal compel researchers to examine the social implications of monumental constructions in the Maya lowlands before the establishment of centralized polities with hereditary rulers. Unlike pyramids, where access to the summits may have been limited to privileged individuals, the horizontal monumentality of the plateau was probably more conducive to inclusive interaction. The Ceibal plateau continued to be built up during the Preclassic period (1000 B.C.-A.D. 175), and its fill volume substantially surpassed those of pyramids. Large-scale construction projects likely promoted organizational and managerial innovations among participants, which may have set the stage for later administrative centralization. [ABSTRACT FROM AUTHOR]

Living vegetation volume (LVV), one of the most difficult tree parameters to calculate, is among the most important factors that indicates the biological characteristics and ecological functions of the crown. Obtaining precise LVV estimates is, however, challenging task because the irregularities of many crown shapes are difficult to capture using standard forestry field equipment. Terrestrial light detection and ranging (T-LiDAR) can be used to record the three-dimensional structures of trees. The primary branches of Larix olgensis and Quercus mongolica in the Qingyuan Experimental Station of Forest Ecology at the Chinese Academy of Sciences (CAS) were taken as the research objects. A new rapid LVV estimation method called the filling method was proposed in this paper based on a T-LiDAR point cloud. In the proposed method, the branch point clouds are divided into leaf points and wood points. We used RiSCAN PRO 1.64 to manually separate the leaf points and wood points under careful visual inspection, and calculated that leaf points and wood points accounted for 91% and 9% of the number of the point clouds of branches. Then, the equation LVV = V1N (where N is the number of leaf points, and V1 is cube size) is used to calculate LVV. When the laser transmission frequency is 300,000 points/second and the point cloud is diluted to 30% using the octree method, the point cloud can be replaced by a cube (V1) of 6.11 cm3 to fill the branch space. The results showed that good performance for this approach, the measuring accuracy for L. olgensis and Q. mongolica at the levels of α = 0.05 and α = 0.01, respectively (94.35%, 90.01% and 91.99%, 85.63%, respectively). The results suggest that the proposed method can be conveniently used to calculate the LVV of coniferous and broad-leaf species under specific scanning settings. This work is explorative because hypotheses or a theoretical framework have not been previously defined. Rather, we would like to contribute to the formation of hypotheses as a background for further studies. [ABSTRACT FROM AUTHOR]

Effective conservation and restoration of estuarine wetlands require accurate maps of their historical and current extent, as well as estimated losses of these valued habitats. Existing coast-wide tidal wetland mapping does not explicitly map historical tidal wetlands that are now disconnected from the tides, which represent restoration opportunities; nor does it use water level models or high-resolution elevation data (e.g. lidar) to accurately identify current tidal wetlands. To better inform estuarine conservation and restoration, we generated new maps of current and historical tidal wetlands for the entire contiguous U.S. West Coast (Washington, Oregon, and California). The new maps are based on an Elevation-Based Estuary Extent Model (EBEEM) that combines lidar digital elevation models (DEMs) and water level models to establish the maximum historical extent of tidal wetlands, representing a major step forward in mapping accuracy for restoration planning and analysis of wetland loss. Building from this new base, we also developed an indirect method for mapping tidal wetland losses, and created maps of these losses for 55 estuaries on the West Coast (representing about 97% of historical West Coast vegetated tidal wetland area). Based on these new maps, we estimated that total historical estuary area for the West Coast is approximately 735,000 hectares (including vegetated and nonvegetated areas), and that about 85% of vegetated tidal wetlands have been lost from West Coast estuaries. Losses were highest for major river deltas. The new maps will help interested groups improve action plans for estuarine wetland habitat restoration and conservation, and will also provide a better baseline for understanding and predicting future changes with projected sea level rise. [ABSTRACT FROM AUTHOR]

Cellular frustrated models have been developed to describe how the adaptive immune system works. They are composed by independent agents that continuously pair and unpair depending on the information that one sub-set of these agents display. The emergent dynamics is sensitive to changes in the displayed information and can be used to detect anomalies, which can be important to accomplish the immune system main function of protecting the host. Therefore, it has been hypothesized that these models could be adequate to model the immune system activation. Likewise it has been hypothesized that these models could provide inspiration to develop new artificial intelligence algorithms for data mining applications. However, computational algorithms do not need to follow strictly the immunological reality. Here, we investigate efficient implementation strategies of these immune inspired ideas for anomaly detection applications and use real data to compare the performance of cellular frustration algorithms with standard implementations of one-class support vector machines and deep autoencoders. Our results demonstrate that more efficient implementations of cellular frustration algorithms are possible and also that cellular frustration algorithms can be advantageous for semi-supervised anomaly detection applications given their robustness and accuracy. [ABSTRACT FROM AUTHOR]

Freely-available satellite data streams and the ability to process these data on cloud-computing platforms such as Google Earth Engine have made frequent, large-scale landcover mapping at high resolution a real possibility. In this paper we apply these technologies, along with machine learning, to the mapping of peatlands–a landcover class that is critical for preserving biodiversity, helping to address climate change impacts, and providing ecosystem services, e.g., carbon storage–in the Boreal Forest Natural Region of Alberta, Canada. We outline a data-driven, scientific framework that: compiles large amounts of Earth observation data sets (radar, optical, and LiDAR); examines the extracted variables for suitability in peatland modelling; optimizes model parameterization; and finally, predicts peatland occurrence across a large boreal area (397, 958 km2) of Alberta at 10 m spatial resolution (equalling 3.9 billion pixels across Alberta). The resulting peatland occurrence model shows an accuracy of 87% and a kappa statistic of 0.57 when compared to our validation data set. Differentiating peatlands from mineral wetlands achieved an accuracy of 69% and kappa statistic of 0.37. This data-driven approach is applicable at large geopolitical scales (e.g., provincial, national) for wetland and landcover inventories that support long-term, responsible resource management. [ABSTRACT FROM AUTHOR]

The Nankai Trough in Japan has been identified as a geological feature that could cause extensive damage in the event of a major earthquake. In this study, we investigated the impact of effective guidance signs for hearing-impaired individuals requiring special care when escaping to a tsunami evacuation building (emergency evacuation location) using geographical information system (GIS) and viewshed analysis. We selected an area we considered would suffer severe damage following a major earthquake and tsunami; we identified difficulties in the provision of escape routes. Using GIS, we determined the time required for escape and tsunami arrival time if effective signs were installed; we undertook such analysis using the height data of buildings in the target area. With effectively installed guidance signs, the average required evacuation time was 36.88 minutes; without such signs (which is currently the case in the target area), the average time was 47.10 minutes: that would result in citizens getting caught by the tsunami. Installing effective guidance signs would allow hearing-impaired individuals to escape to an evacuation building before being hit by the tsunami. [ABSTRACT FROM AUTHOR]

The aim of this investigation was to establish the validity of a GPS-based tracking system (Polar Team Pro System, PTPS) for estimating sprint performance and to evaluate additional diagnostic indices derived from the temporal course of the movement velocity. Thirty-four male soccer players (20 ± 4 years) performed a 20 m sprint test measured by timing gates (TG), and while wearing the PTPS. To evaluate the relevance of additional velocity-based parameters to discriminate between faster and slower athletes, the median-split method was applied to the 20-m times. Practical relevance was estimated using standardized mean differences (d) between the subgroups. Differences between the criterion reference (TG) and PTPS for the 10 and 20 m splits did not vary from zero (dt10: -0.01 ± 0.07 s, P = 0.7, d < -0.1; dt20: -0.01 ± 0.08 s, P = 0.4, d < -0.2). Although subgroups revealed large differences in their sprint times (d = -2.5), the average accelerations between 5 and 20 km/h as well as 20 and 25 km/h showed merely small effects (d < 0.5). Consequently, analyses of velocity curves derived from PTPS may help to clarify the occurrence of performance in outdoor sports. Thus, training consequences can be drawn which contribute to the differentiation and individualization of sprint training. [ABSTRACT FROM AUTHOR]

Road Detection is a basic task in automated driving field, in which 3D lidar data is commonly used recently. In this paper, we propose to rearrange 3D lidar data into a new organized form to construct direct spatial relationship among point cloud, and put forward new features for real-time road detection tasks. Our model works based on two prerequisites: (1) Road regions are always flatter than non-road regions. (2) Light travels in straight lines in a uniform medium. Based on prerequisite 1, we put forward difference-between-lines feature, while ScanID density and obstacle radial map are generated based on prerequisite 2. According to our method, we construct an array of structures to store and reorganize 3D input firstly. Then, two novel features, difference-between-lines and ScanID density, are extracted, based on which we construct a consistency map and an obstacle map in Bird Eye View (BEV). Finally, the road region is extracted by fusing these two maps and refinement is used to polish up our outcome. We have carried out experiments on the public KITTI-Road benchmark, achieving one of the best performances among the lidar-based road detection methods. To further prove the efficiency of our method on unstructured road, the visual outcomes in rural areas are also proposed. [ABSTRACT FROM AUTHOR]

The traditional U-turn design has significantly improved traffic operations for relieving traffic congestion. However, the U-turn diversion and merge segments still cause traffic conflicts and delays. In this paper, an exclusive spur dike U-turn lane (ESUL) is proposed with the aim of addressing the disadvantages of the traditional U-turn design. ESUL provides a separate U-turn lane to diverge, decelerate, U-turn, accelerate and merge without interacting with through traffic. The effectiveness of ESUL is demonstrated through a field data investigation, simulation and analysis with VISSIM software. The proposed design is evaluated in terms of three parameters: travel time, delay and number of stops. Compared to the traditional U-turn design, ESUL can reduce travel time by 29.15%, delay by 66.70% and the number of stops by 100% at most. The results showed that ESUL has better performance than the traditional U-turn design and could be implemented to reduce traffic congestion and the potential hazards caused by U-turn maneuvers. [ABSTRACT FROM AUTHOR]

The purpose of Fuzzy Comprehensive CS-SVR Model (FCCS-SVR) is to evaluate and monitor the health status of a radar equipment and then keep its safe operation. Due to reasons such as few samples, slow changes and the nonlinear structure of data of fault monitoring signal, the health status evaluation of a radar system is quite difficult. By establishing the evaluation index system of a radar, the combination of AHP method and Entropy weight method is studied in this paper. In order to evaluate the value of health status, several optimization algorithms including PSO, GA, BA and CS are used for optimizing the parameters of SVR model. Meanwhile, in order to avoid the problem that the system is at the edge of the state, a radar health assessment method based on the combination of Fuzzy Comprehensive Evaluation and Cuckoo Search-Support Vector Regression (CS-SVR), which is named as Fuzzy Comprehensive CS-SVR (FCCS-SVR), is further proposed. The result of case analysis reflects that the state evaluation of the radar system is realized. The system performance analysis shows that the use of FCCS-SVR evaluation method provides a high recognition rate and can accurately assess the health status of the radar system. [ABSTRACT FROM AUTHOR]

Worldwide, crop production is intrinsically intertwined with biological, environmental and economic systems, all of which involve complex, inter-related and spatially-sensitive phenomena. Thus knowing the location of agriculture matters much for a host of reasons. There are several widely cited attempts to model the spatial pattern of crop production worldwide, not least by pixilating crop production statistics originally reported on an areal (administrative boundary) basis. However, these modeled measures have had little scrutiny regarding the robustness of their results to alternative data and modeling choices. Our research casts a critical eye over the nature and empirical plausibility of these types of datasets. To do so, we determine the sensitivity of the 2005 variant of the spatial production allocation model data series (SPAM2005) to eight methodological-cum-data choices in nine agriculturally-large and developmentally-variable countries: Brazil, China, Ethiopia, France, India, Indonesia, Nigeria, Turkey and the United States. We compare the original published estimates with those obtained from a series of robustness tests using various aggregations of the pixelized spatial production indicators (specifically, commodity-specific harvested area, production quantity and yield). Spatial similarity is empirically assessed using a pixel-level spatial similarity index (SSI). We find that the SPAM2005 estimates are most dependent on the degree of disaggregation of the underlying national and subnational production statistics. The results are also somewhat sensitive to the use of a simple spatial allocation method based solely on cropland proportions versus a cross-entropy allocation method, as well as the set of crops or crop aggregates being modeled, and are least sensitive to the inclusion of crude economic elements. Finally, we assess the spatial concordance between the SPAM2005 estimates of the area harvested of major crops in the United States and pixelated measures derived from remote-sensed data. [ABSTRACT FROM AUTHOR]

Colored dissolved organic matter (CDOM), a major component of the dissolved organic carbon (DOC) pool in many lakes, is an important controlling factor in lake ecosystem functioning. Absorption coefficients at 440 nm (a440, m-1), a common measure of CDOM, exhibited strong associations with dissolved iron (Fediss) and DOC in 280 lakes of the Upper Great Lakes States (UGLS: Minnesota, Wisconsin, and Michigan), as has been found in Scandinavia and elsewhere. Linear regressions between the three variables on UGLS lake data typically yielded R2 values of 0.6–0.9, suggesting that some underlying common processes influence organic matter and Fediss. Statistical and experimental evidence, however, supports only a minor role for iron contributions to a440 in UGLS lakes. Although both DOC and Fediss were significant variables in linear and log-log regressions on a440, DOC was the stronger predictor; adding Fediss to the linear a440-DOC model improved the R2 only from 0.90 to 0.93. Furthermore, experimental additions of FeIII to colored lake waters had only small effects on a440 (average increase of 0.242 m-1 per 100 μg/L of added FeIII). For 136 visibly stained waters (with a440 > 3.0 m-1), where allochthonous DOM predominates, DOM accounted for 92.3 ± 5.0% of the measured a440 values, and Fediss accounted for the remainder. In 75% of the lakes, Fediss accounted for < 10% of a440, but contributions of 15–30% were observed for 7 river-influenced lakes. Contributions of Fediss in UGLS lakes to specific UV absorbance at 254 nm (SUVA254) generally were also low. Although Fediss accounted for 5–10% of measured SUVA254 in a few samples, on average, 98.1% of the SUVA254 signal was attributable to DOM and only 1.9% to Fediss. DOC predictions from measured a440 were nearly identical to those from a440 corrected to remove Fediss contributions. Overall, variations in Fediss in most UGLS lakes have very small effects on CDOM optical properties, such as a440 and SUVA254, and negligible effects on the accuracy of DOC estimated from a440, data for which can be obtained at broad regional scales by remote sensing methods. [ABSTRACT FROM AUTHOR]

As the Western Antarctic Peninsula (WAP) region responds to a warmer climate, the impacts of glacial meltwater on the Southern Ocean are expected to intensify. The Antarctic Peninsula fjord system offers an ideal system to understand meltwater’s properties, providing an extreme in the meltwater’s spatial gradient from the glacio-marine boundary to the WAP continental shelf. Glacial meltwater discharge in Arctic and Greenland fjords is typically characterized as relatively lower temperature, fresh and with high turbidity. During two cruises conducted in December 2015 and April 2016 in Andvord Bay, we found a water lens of low salinity and low temperature along the glacio-marine interface. Oxygen isotope ratios identified this water lens as a mixture of glacial ice and deep water in Gerlache Strait suggesting this is glacial meltwater. Conventional hydrographic measurements were combined with optical properties to effectively quantify its spatial extent. Fine suspended sediments associated with meltwater (nanoparticles of ~ 5nm) had a significant impact on the underwater light field and enabled the detection of meltwater characteristics and spatial distribution. In this study, we illustrate that glacial meltwater in Andvord Bay alters the inherent and apparent optical properties of the water column, and develop statistical models to predict the meltwater content from hydrographic and optical measurements. The predicted meltwater fraction is in good agreement with in-situ values. These models offer a potential for remote sensing and high-resolution detection of glacial meltwater in Antarctic waters. Furthermore, the possible influence of meltwater on phytoplankton abundance in the surface is highlighted; a significant correlation is found between meltwater fraction and chlorophyll concentration. [ABSTRACT FROM AUTHOR]

With wetlands categorized as one of the three major ecosystems, the study of wetland health has global environmental implications. Multiple regression models were employed to establish relationships between Landsat-8 images, vegetation indices and field measured biomass in the Yellow River Delta Nature Reserve. These models were then used to estimate the spatial distribution of wetland vegetative biomass. The relationships between wetland vegetative biomass and soil factors (organic matter, nitrogen, phosphorus, potassium, water soluble salt, pH and moisture) were modeled. We were able to achieve higher correlations and improved model fits using vegetative indices and spectral bands 1–5 as independent variables. Several important soil factors were isolated, including soil moisture and salt concentrations, which affect wetland biomass spatial distributions. Overall, wetland biomass decreased from land to the ocean and from the river courses outward. [ABSTRACT FROM AUTHOR]

A terrestrial laser scanner is a fast, high-precision data acquisition device, which has been applied more and more to the research area of forest inventory. In this study, a type of automated low-cost terrestrial laser scanner was designed and implemented based on a SICK LMS-511 two-dimensional laser scanning sensor and a stepper motor. The new scanner was named BEE(developed by the department of Electronic Engineering, Beijing Forestry University), which can scan the forest trees in three dimensions. The BEE scanner and its supporting software are specifically designed for forest inventory. The specific software was developed to smoothly control the BEE scanner and to acquire the data, including the angular data, range data, and intensity data, and the data acquired by the BEE scanner could be processed into point cloud data, a range map, and an intensity map. Based on the point cloud data, the trees were detected by a single slice of the single scan in a plot, and the local ground plane was fitted for each detected tree. Then the diameter at breast height (DBH), tree height, and tree position could be estimated automatically by using the specific software. The experiments have been performed by using the BEE scanner in an artificial ginkgo forest which was located in the Haidian District of Beijing. Four 10 m × 10 m square plots were selected for the experiments. The BEE scanner scanned in the four plots and acquired the single-scan data, respectively. The DBH, tree height, and tree position of the trees in the four plots were estimated and analyzed. For comparison, manually-measured data was also collected in the four plots. The trunk detection rate for all four plots was 92.75%; the root mean square error of the DBH estimation was 1.27 cm; the root mean square error of the tree height estimation was 0.24 m; and the tree position estimation was in line with the actual position. The scanner also was tested in more natural forest in the JiuFeng Forest Park. Two plots with a radius of 5 meters were scanned. Eleven trees in the plot with a flat ground were detected and DBH were estimated. But tree detection was failed in the other plot because of the undulating ground. Experimental results show that the BEE scanner can efficiently estimate the structure parameters of plantation trees and has good potential in practical applications of forest inventory. [ABSTRACT FROM AUTHOR]

The world’s largest macroalgal blooms caused by Ulva prolifera have occurred in the Yellow Sea for 11 consecutive years. The area covered by blooms has been approximately 500 km2 in previous years, while in 2017, the maximum area decreased significantly to 312 km2. In this study, we concluded that species competition between Ulva and Sargassum (fast rise of the golden tides), extreme high sea surface temperature and harvest for floating Ulva macroalgae were the three critical factors influencing the sharp reduction in covered area for blooms in 2017. In addition, analysis of annual variations of Pyropia aquaculture area in the Southern Yellow Sea over the past two decades revealed that a great expansion in “Sansha” regions was mainly responsible for the initial blooms in 2007, and that this expansion supported the great biomass of the blooms in following years. Based on these findings, we suggest comprehensive utilization of the macroalgal blooms is a feasible way to control them. [ABSTRACT FROM AUTHOR]

Among traditional Light Detection And Ranging (LIDAR) data representations such as raster grid, triangulated irregular network, point clouds and octree, the explicit 3D nature of voxel-based representation makes it a promising alternative. Despite the benefit of voxel-based representation, voxel-based algorithms have rarely been used for building detection. In this paper, a voxel segmentation-based 3D building detection algorithm is developed for separating building and nonbuilding voxels. The proposed algorithm first voxelizes the LIDAR point cloud into a grayscale voxel structure in which the grayscale of the voxel corresponds to the quantized mean intensity of the LIDAR points within the voxel. The voxelized dataset is segmented into multiple 3D-connected regions depending on the connectivity and grayscale similarity among voxels. The 3D-connected regions corresponding to the building roof and facade are detected sequentially according to characteristics such as their area, density, elevation difference and location. The obtained results for the detected buildings are evaluated by the LIDAR data provided by working group III/4 of ISPRS, which demonstrate a high rate of success. Average completeness, correctness, quality, and kappa coefficient indexes values of 90.0%, 96.0%, 88.1% and 88.7%, respectively, are obtained for buildings. [ABSTRACT FROM AUTHOR]

Landscape solar energy is a significant environmental driver, yet it remains complicated to model well. Several solar radiation models simplify the complexity of light by estimating it at discrete point locations or by averaging values over larger areas. These modeling approaches may be useful in certain cases, but they are unable to provide spatially distributed and temporally dynamic representations of solar energy across entire landscapes. We created a landscape-scale ground-level shade and solar energy model called Penumbra to address this deficiency. Penumbra simulates spatially distributed ground-level shade and incident solar energy at user-defined timescales by modeling local and distant topographic shading and vegetative shading. Spatially resolved inputs of a digital elevation model, a normalized digital surface model, and landscape object transmittance are used to estimate spatial variations in solar energy at user-defined temporal timesteps. The research goals for Penumbra included: 1) simulations of spatiotemporal variations of shade and solar energy caused by both objects and topographic features, 2) minimal user burden and parameterization, 3) flexible user defined temporal parameters, and 4) flexible external model coupling. We test Penumbra’s predictive skill by comparing the model’s predictions with monitored open and forested sites, and achieve calibrated mean errors ranging from -17.3 to 148.1 μmoles/m2/s. Penumbra is a dynamic model that can produce spatial and temporal representations of shade percentage and ground-level solar energy. Outputs from Penumbra can be used with other ecological models to better understand the health and resilience of aquatic, near stream terrestrial, and upland ecosystems. [ABSTRACT FROM AUTHOR]

This paper constructed a stacked-autoencoder neural network model (SAE model) to estimate sea state bias (SSB) based on radar altimeter data. Six cycles of the geophysical data record (GDR) from Jason-1/2 radar altimeters were used as a training dataset, and the other 2 cycles of the GDR from Jason-1/2 were used for testing. The inputs to this SAE model include the significant wave height (SWH), wind speed (U), sea surface height (SSH), backscatter coefficient (σ0) and automatic gain control (AGC), and the model outputs the SSB. The model includes one input layer, three hidden layers and one output layer. The SSBs in the GDR of Jason-1/2 were obtained from a nonparametric model based on the SWH and U as input variables; thus, the model has high accuracy but low efficiency. The SSBs in the GDR of HY-2A were computed using a four-parameter parametric model that uses the SWH and U as input variables; therefore, this model’s computational speed is high but its accuracy is low. Thus, we used the HY-2A radar altimeter as an unseen validation dataset to evaluate the performance of the SAE model. Then, we analyzed the contrasting results of these methods, including the differences in the SSB, explained variance, residual error and operational efficiency. The results demonstrate not only that the accuracy of the SAE model is superior to that of the conventional parametric model but also that its operational efficiency is better than that of the nonparametric model. [ABSTRACT FROM AUTHOR]

This paper presents a discretization methodology applied to the NBV (Next Best View) problem, which consists of determining the heuristical best position of the next scan. This new methodology is a hybrid process between a homogenous voxelization and an octree structure that preserves the advantages of both methods. An octree structure is not directly applicable to the NBV problem: as the point cloud grows with every successive scanning, the limits and position of the discretization, octree structure must coincide, in order to transfer the information from one scan to the next. This problem is solved by applying a first coarse voxelization, followed by the division of each voxel in an octree structure. In addition, a previous methodology for solving the NBV problem has been adapted to make use of this novel approach. Results show that the new method is three times faster than the homogenous voxelization for a maximum resolution of 0.2m. For this target resolution of 0.2m, the number of voxels/octants in the discretization is reduced approximately by a 400%, from 35.360 to 8.937 for the study case presented. [ABSTRACT FROM AUTHOR]

As an informative proxy measure for a range of urbanisation and socioeconomic variables, satellite-derived night-time light data have been widely used to investigate the diverse anthropogenic activities and reveal social economy development disparities from the regional to the national scale. The new-generation night-time light data have been proven to potentially improve our understanding in the development and inequality of urban social economy due to its high spatial resolution, strong timeliness and minimal background noise. These night-time light data are derived from the visible infrared imaging radiometer suite (VIIRS) instrument with day/night band located on the Suomi National Polar-orbiting Partnership (NPP) satellite. This study proposed a hybrid model to estimate urban consumption potentiality based on the comprehensive information of human activities obtained from the VIIRS night-time light data. Our method established a flexible geographically weighted regression-based estimation model based on the residential consumption data and DN values of the VIIRS data to predict the possible consumption potentiality of other urban areas in dynamic time. The experiment conducted in Guiyang, a provincial capital in China, affirms that our model is proven to have higher accuracy compared with traditional regression models and can potentially provide guidance for improved business management and increased profit. [ABSTRACT FROM AUTHOR]

Chlorophyll-a (Chl-a) concentration is a key parameter to describe water quality in marine and freshwater environments. Nowadays, several products with Chl-a have derived from satellite imagery, but they are not available or reliable sometimes for coastal and/or small water bodies. Thus, in the last decade several methods have been described to estimate Chl-a with high-resolution (30 m) satellite imagery, such as Landsat, but a standardized method to estimate Chl-a from Landsat imagery has not been accepted yet. Therefore, this study evaluated the predictive performance of regression models (Simple Linear Regression [SLR], Multiple Linear Regression [MLR] and Generalized Additive Models [GAMs]) to estimate Chl-a based on Landsat imagery, using in situ Chl-a data collected (synchronized with the overpass of Landsat 8 satellite) and spectral reflectance in the visible light portion (bands 1–4) and near infrared (band 5). These bands were selected because of Chl-a absorbance/reflectance properties in these wavelengths. According to goodness of fit, GAM outperformed SLR and MLR. However, the model validation showed that MLR performed better in predicting log-transformed Chl-a. Thus, MLR, constructed by using four spectral bands (1, 2, 3, and 5), was considered the best method to predict Chl-a. The coefficients of this model suggested that log-transformed Chl-a concentration had a positive linear relationship with bands 1 (coastal/aerosol), 3 (green), and 5 (NIR). On the other hand, band 2 (blue) suggested a negative relationship, which implied high coherence with Chl-a absorbance/reflectance properties measured in the laboratory, indicating that Landsat 8 images could be applied effectively to estimate Chl-a concentrations in coastal environments. [ABSTRACT FROM AUTHOR]

Proximal remote sensing is being used across a very wide range of research fields and by scientists, who are often without deep theoretical knowledge optical physics; the author of this article falls squarely in that category! This article highlights two optical phenomena, which may greatly influence the quality and robustness of proximal remote sensing: penetration and scattering. Penetration implies that acquired reflectance signals are associated with both physical and chemical properties of target objects from both the surface and internal tissues/structures. Scattering implies that reflectance signals acquired from one point or object are influenced by scattered radiometric energy from neighboring points or objects. Based on a series of laboratory experiments, penetration and scattering were discussed in the context of “robustness” (repeatability) of hyperspectral reflectance data. High robustness implies that it is possible to control imaging conditions and therefore: 1) obtain very similar radiometric signals from inert objects (objects that do not change) over time, and 2) be able to consistently distinguish objects that are otherwise highly similar in appearance (size, shape, and color) and in terms of biochemical composition. It was demonstrated that robustness of hyperspectral reflectance data (40 spectral bands from 385 to 1024 nm) were significantly influenced by penetration and scattering of radiometric energy. In addition, it was demonstrated that the influence of penetration and scattering varied across the examined spectrum. Characterization of how optical phenomena may affect the robustness of reflectance data is important when using proximal remote sensing technologies as tools used to classify engineering and biological objects. [ABSTRACT FROM AUTHOR]

Recently, Li et al. proposed a novel smart card and dynamic ID-based remote user authentication scheme for multi-server environments. They claimed that their scheme can resist several types of attacks. However, through careful analysis, we find that Li et al.’s scheme is vulnerable to stolen smart card and off-line dictionary attacks, replay attacks, impersonation attacks and server spoofing attacks. By analyzing other similar schemes, we find that a certain type of dynamic ID-based multi-server authentication scheme in which only hash functions are used and whereby no registration center participates in the authentication and session key agreement phase faces difficulties in providing perfectly efficient and secure authentication. To compensate for these shortcomings, we propose a novel dynamic ID-based remote user authentication scheme for multi-server environments based on pairing and self-certified public keys. Security and performance analyses show that the proposed scheme is secure against various attacks and has many excellent features. [ABSTRACT FROM AUTHOR]

Wind and temperature data are important parameters in aircraft performance studies. The lack of accurate measurements of these parameters forces researchers to rely on numerical weather prediction models, which are often filtered for a larger area with decreased local accuracy. Aircraft, however, also transmit information related to weather conditions, in response to interrogation by air traffic controller surveillance radars. Although not intended for this purpose, aircraft surveillance data contains information that can be used for weather models. This paper presents a method that can be used to reconstruct a weather field from surveillance data that can be received with a simple 1090 MHz receiver. Throughout the paper, we answer two main research questions: how to accurately infer wind and temperature from aircraft surveillance data, and how to reconstruct a real-time weather grid efficiently. We consider aircraft as moving sensors that measure wind and temperature conditions indirectly at different locations and flight levels. To address the first question, aircraft barometric altitude, ground velocity, and airspeed are decoded from down-linked surveillance data. Then, temperature and wind observations are computed based on aeronautical speed conversion equations. To address the second question, we propose a novel Meteo-Particle (MP) model for constructing the wind and temperature fields. Short-term local prediction is also possible by employing a predictor layer. Using an unseen observation test dataset, we are able to validate that the mean absolute errors of inferred wind and temperature using MP model are 67% and 26% less than using the interpolated model based on GFS reanalysis data. [ABSTRACT FROM AUTHOR]

Comparing the functional performance of biological systems often requires comparing multiple mechanical properties. Such analyses, however, are commonly presented using orthogonal plots that compare N ≤ 3 properties. Here, we develop a multidimensional visualization strategy using permutated radar charts (radial, multi-axis plots) to compare the relative performance distributions of mechanical systems on a single graphic across N ≥ 3 properties. Leveraging the fact that radar charts plot data in the form of closed polygonal profiles, we use shape descriptors for quantitative comparisons. We identify mechanical property-function correlations distinctive to rigid, flexible, and damage-tolerant biological materials in the form of structural ties, beams, shells, and foams. We also show that the microstructures of dentin, bone, tendon, skin, and cartilage dictate their tensile performance, exhibiting a trade-off between stiffness and extensibility. Lastly, we compare the feeding versus singing performance of Darwin’s finches to demonstrate the potential of radar charts for multidimensional comparisons beyond mechanics of materials. [ABSTRACT FROM AUTHOR]

As China’s political and economic centre, the Beijing–Tianjin–Hebei (BTH) urban agglomeration experiences serious environmental challenges on particulate matter (PM) concentration, which results in fundamental or irreparable damages in various socioeconomic aspects. This study investigates the seasonal and spatial distribution characteristics of PM2.5 concentration in the BTH urban agglomeration and their critical impact factors. Spatial interpolation are used to analyse the real-time monitoring of PM2.5 data in BTH from December 2013 to May 2017, and partial least squares regression is applied to investigate the latest data of potential polluting variables in 2015. Several important findings are obtained: (1) Notable differences exist amongst PM2.5 concentrations in different seasons; January (133.10 mg/m3) and December (120.19 mg/m3) are the most polluted months, whereas July (38.76 mg/m3) and August (41.31 mg/m3) are the least polluted months. PM2.5 concentration shows a periodic U-shaped variation pattern with high pollution levels in autumn and winter and low levels in spring and summer. (2) In terms of spatial distribution characteristics, the most highly polluted areas are located south and east of the BTH urban agglomeration, and PM2.5 concentration is significantly low in the north. (3) Empirical results demonstrate that the deterioration of PM2.5 concentration in 2015 is closely related to a set of critical impact factors, including population density, urbanisation rate, road freight volume, secondary industry gross domestic product, overall energy consumption and industrial pollutants, such as steel production and volume of sulphur dioxide emission, which are ranked in terms of their contributing powers. The findings provide a basis for the causes and conditions of PM2.5 pollution in the BTH regions. Viable policy recommendations are provided for effective air pollution treatment. [ABSTRACT FROM AUTHOR]

Echolocating bats rely on active sound emission (echolocation) for mapping novel environments and navigating through them. Many theoretical frameworks have been suggested to explain how they do so, but few attempts have been made to build an actual robot that mimics their abilities. Here, we present the ‘Robat’—a fully autonomous bat-like terrestrial robot that relies on echolocation to move through a novel environment while mapping it solely based on sound. Using the echoes reflected from the environment, the Robat delineates the borders of objects it encounters, and classifies them using an artificial neural-network, thus creating a rich map of its environment. Unlike most previous attempts to apply sonar in robotics, we focus on a biological bat-like approach, which relies on a single emitter and two ears, and we apply a biological plausible signal processing approach to extract information about objects’ position and identity. [ABSTRACT FROM AUTHOR]

Honeybees, Apis mellifera, perform re-orientation flights to learn about the new surroundings of the hive when their hive is transported to a new location. Since the pattern of re-orientation flights has not yet been studied, we asked whether this form of exploratory behavior differs from the well described exploratory orientation flights performed by young honeybees before they start foraging. We also investigated whether the exploratory components of re-orientation flights differ from foraging flights and if so how. We recorded re-orientation flights using harmonic radar technology and compared the patterns and flight parameters of these flights with the first exploratory orientation flights of young honeybees and foraging flights of experienced foragers. Just as exploratory orientation flights of young honeybees, re-orientation flights can be classified into short- and long-range flights, and most short-range re-orientation flights were performed under unfavorable weather conditions. This indicates that bees adapt the flight pattern of their re-orientation and orientation flights to changing weather conditions in a similar way. Unlike exploratory orientation flights, more than one sector of the landscape was explored during a long-range re-orientation flight, and significantly longer flight durations and flight distances were observed. Thus, re-orienting bees explored a larger terrain than bees performing their first exploratory orientation flight. By displacing some bees after their first re-orientation flight, we could demonstrate that a single re-orientation flight seems to be sufficient to learn the new location of the hive. The flight patterns of re-orientation flights differed clearly from those of foraging flights. Thus, re-orientation flights represent a special exploratory behavior that is triggered by a change in the location of the hive. [ABSTRACT FROM AUTHOR]

Feature selection is considered to be one of the most critical methods for choosing appropriate features from a larger set of items. This task requires two basic steps: ranking and filtering. Of these, the former necessitates the ranking of all features, while the latter involves filtering out all irrelevant features based on some threshold value. In this regard, several feature selection methods with well-documented capabilities and limitations have already been proposed. Similarly, feature ranking is also nontrivial, as it requires the designation of an optimal cutoff value so as to properly select important features from a list of candidate features. However, the availability of a comprehensive feature ranking and a filtering approach, which alleviates the existing limitations and provides an efficient mechanism for achieving optimal results, is a major problem. Keeping in view these facts, we present an efficient and comprehensive univariate ensemble-based feature selection (uEFS) methodology to select informative features from an input dataset. For the uEFS methodology, we first propose a unified features scoring (UFS) algorithm to generate a final ranked list of features following a comprehensive evaluation of a feature set. For defining cutoff points to remove irrelevant features, we subsequently present a threshold value selection (TVS) algorithm to select a subset of features that are deemed important for the classifier construction. The uEFS methodology is evaluated using standard benchmark datasets. The extensive experimental results show that our proposed uEFS methodology provides competitive accuracy and achieved (1) on average around a 7% increase in f-measure, and (2) on average around a 5% increase in predictive accuracy as compared with state-of-the-art methods. [ABSTRACT FROM AUTHOR]

During the atmospheric correction of remote sensing data in inland waters, the original Second Simulation of the Satellite Signal in the Solar Spectrum-Vector version (6SV) model does not eliminate the specular reflection of downward skylight radiance at the air-water interface. Thus, we propose a modified version of the 6SV model (M6SV) that does remove reflected skylight at the air-water interface. We apply the new model to the atmospheric correction of a Landsat 8 Operational Land Imager (OLI) image over Taihu Lake, China, where the aerosol optical depth is known. In situ reflectance measurements acquired concurrently with the L8/OLI image are used to validate the performance of the new M6SV algorithm. To further analyze the merits and demerits of M6SV, the model is compared with two short-wave infrared (SWIR)-based atmospheric correction models: the Sea-Viewing Wide Field-of-View Sensor Data Analysis System short-wave infrared (SD-SWIR) model and the Vanhellemont & Ruddick short-wave infrared with a per scene fixed aerosol type (VR-SWIR-F) model. Comparisons of results from all three L8/OLI image atmospheric corrections with the in situ remote sensing reflectance data show that M6SV produces reliable atmospheric corrections in the green and red spectral bands and is an effective alternative for Landsat 8 OLI atmospheric correction in inland waters. [ABSTRACT FROM AUTHOR]

Sparse spectral clustering (SSC) has become one of the most popular clustering approaches in recent years. However, its high computational complexity prevents its application to large-scale datasets such as hyperspectral images (HSIs). In this paper, we propose two efficient approximate sparse spectral clustering methods for HSIs clustering in which clustering performance is improved by utilizing local information among the data. Firstly, we construct a smaller representative dataset on which sparse spectral clustering is performed. Then the labels of ground object are extending to whole dataset based on the local information according to two extending strategies. The first one is that the local interpolation is utilized to improve the extension of the clustering result. The other one is that the label extension is turned to a problem of subspace embedding, and is fulfilled by locally linear embedding (LLE). Several experiments on HSIs demonstrated that the proposed algorithms are effective for HSIs clustering. [ABSTRACT FROM AUTHOR]

A simple approach to enable water-management agencies employing free data to create a single set of water quality predictive equations with satisfactory accuracy is proposed. Multiple regression-derived equations based on surface reflectance, band ratios, and environmental factors as predictor variables for concentrations of Total Suspended Solids (TSS) and Total Nitrogen (TN) were derived using a hybrid forward-selection method that considers both p-value and Variance Inflation Factor (VIF) in the forward-selection process. Landsat TM, ETM+, and OLI/TIRS images were jointly utilized with environmental factors, such as wind speed and water surface temperature, to derive the single set of equations. Through splitting data into calibration and validation groups, the coefficients of determination are 0.73 for TSS calibration and 0.70 for TSS validation, respectively. The coefficients of determination for TN calibration and validation are 0.64 and 0.37, respectively. Among all chosen predictor variables, ratio of reflectance of visible red (Band 3 for Landsat TM and ETM+, or Band 4 for Landsat OLI/TIRS) to visible blue (Band 1 for Landsat TM and ETM+, or Band 2 for Landsat OLI/TIRS) has a strong influence on the predictive power for TSS retrieval. Environmental factors including wind speed, remote sensing-derived water surface temperature, and time difference (in days) between the image acquisition and water sampling were found to be important in water-quality quantity estimation. The hybrid forward-selection method consistently yielded higher validation accuracy than that of the conventional forward-selection approach. [ABSTRACT FROM AUTHOR]

Introduction: The aim of the study was to (i) analyze the match performance of professional female tennis players in different Grand Slams; (ii) model the relationships between match performance variables and relative quality; and (iii) build typical performance profiles for those players in Grand Slams. Method: Data of a total of 1369 matches were collected within 2014–2017 four Grand Slams (Australian Open: n = 499; Roland Garros: n = 249; Wimbledon: n = 249 and US Open, n = 372). Correlations between 37 performance variables and relative quality (difference of expected rounds between two competing players of given ranking) were determined and automatically classified into two groups of magnitudes via two-step cluster analysis. Higher-correlated variables were used to build players’ typical performance profiles via regression-based technique to give percentage evaluation scores (%ES), which means the percentage of matches where a performance variable value would be expected to be lower than the observed value considering the RQ of two competing players. Results: Players had more service winners, double faults, return winners and return unforced errors in the Australian Open and US Open, implying a “fast-fast” serve strategy, and higher dominance ratio and better serving performance in Wimbledon. While receiving players had better chances to break opponents’ service game in Roland Garros. Distance covered became similar in all Grand Slams. All studied variables showed obvious correlation with RQ expect for those of physical performance. Conclusions: The findings (i) indicate that female game in Grand Slams remained to be a contest over baseline, although players had good efficiency at net; (ii) demonstrate the influence of relative quality on serve and return, break point, net point and efficiency performance; and (iii) evidence the usefulness of applying %ES to evaluate performance of individual player. [ABSTRACT FROM AUTHOR]

Image registration of remotely sensed imagery is challenging, as complex deformations are common. Different deformations, such as affine and homogenous transformation, combined with multimodal data capturing can emerge in the data acquisition process. These effects, when combined, tend to compromise the performance of the currently available registration methods. A new image transform, known as geometric mean projection transform, is introduced in this work. As it is deformation invariant, it can be employed as a feature descriptor, whereby it analyzes the functions of all vertical and horizontal signals in local areas of the image. Moreover, an invariant feature correspondence method is proposed as a point matching algorithm, which incorporates new descriptor’s dissimilarity metric. Considering the image as a signal, the proposed approach utilizes a square Eigenvector correlation (SEC) based on the Eigenvector properties. In our experiments on standard test images sourced from “Featurespace” and “IKONOS” datasets, the proposed method achieved higher average accuracy relative to that obtained from other state of the art image registration techniques. The accuracy of the proposed method was assessed using six standard evaluation metrics. Furthermore, statistical analyses, including t-test and Friedman test, demonstrate that the method developed as a part of this study is superior to the existing methods. [ABSTRACT FROM AUTHOR]

Land use and land cover change research has been applied to landslides, erosion, land planning and global change. Based on the CA-Markov model, this study predicts the spatial patterns of land use in 2025 and 2036 based on the dynamic changes in land use patterns using remote sensing and geographic information system. CA-Markov integrates the advantages of cellular automata and Markov chain analysis to predict future land use trends based on studies of land use changes in the past. Based on Landsat 5 TM images from 1992 and 2003 and Landsat 8 OLI images from 2014, this study obtained a land use classification map for each year. Then, the genetic transition probability from 1992 to 2003 was obtained by IDRISI software. Based on the CA-Markov model, a predicted land use map for 2014 was obtained, and it was validated by the actual land use results of 2014 with a Kappa index of 0.8128. Finally, the land use patterns of 2025 and 2036 in Jiangle County were determined. This study can provide suggestions and a basis for urban development planning in Jiangle County. [ABSTRACT FROM AUTHOR]

Climate change projections show that temperature and precipitation increases can alter the exchange of greenhouse gases between the atmosphere and high latitude landscapes, including their freshwaters. Dissolved organic carbon (DOC) plays an important role in greenhouse gas emissions, but the impact of catchment productivity on DOC release to subarctic waters remains poorly known, especially at regional scales. We test the hypothesis that increased terrestrial productivity, as indicated by the normalized difference vegetation index (NDVI), generates higher stream DOC concentrations in the Stordalen catchment in subarctic Sweden. Furthermore, we aimed to determine the degree to which other generic catchment properties (elevation, slope) explain DOC concentration, and whether or not land cover variables representing the local vegetation type (e.g., mire, forest) need to be included to obtain adequate predictive models for DOC delivered into rivers. We show that the land cover type, especially the proportion of mire, played a dominant role in the catchment’s release of DOC, while NDVI, slope, and elevation were supporting predictor variables. The NDVI as a single predictor showed weak and inconsistent relationships to DOC concentrations in recipient waters, yet NDVI was a significant positive regulator of DOC in multiple regression models that included land cover variables. Our study illustrates that vegetation type exerts primary control in DOC regulation in Stordalen, while productivity (NDVI) is of secondary importance. Thus, predictive multiple linear regression models for DOC can be utilized combining these different types of explanatory variables. [ABSTRACT FROM AUTHOR]

Little is known of the spatio-temporal occurrence of beaked whales off western Ireland, limiting the ability of Regulators to implement appropriate management and conservation measures. To address this knowledge gap, static acoustic monitoring was carried out using eight fixed bottom-mounted autonomous acoustic recorders: four from May to December 2015 on Ireland’s northern slope and four from March to November 2016 on the western and southern slopes. Recorders ran for 205 to 230 days, resulting in 4.09 TB of data sampled at 250 kHz which could capture beaked whale acoustic signals. Zero-crossing-based automated detectors identified beaked whale clicks. A sample of detections was manually validated to evaluate and optimize detector performance. Analysis confirmed the occurrence of Sowerby’s and Cuvier’s beaked whales and Northern bottlenose whales. Northern bottlenose whale clicks occurred in late summer and autumn, but were too few to allow further analysis. Cuvier’s and Sowerby’s clicks occurred at all stations throughout the monitoring period. There was a significant effect of month and station (latitude) on the mean daily number of click detections for both species. Cuvier’s clicks were more abundant at lower latitudes while Sowerby’s were greater at higher latitudes, particularly in the spring, suggesting a spatial segregation between species, possibly driven by prey preference. Cuvier’s occurrence increased in late autumn 2015 off northwest Porcupine Bank, a region of higher relative occurrence for each species. Seismic airgun shots, with daily sound exposure levels as high as 175 dB re 1 μPa2·s, did not appear to impact the mean daily number of Cuvier’s or Sowerby’s beaked whale click detections. This work provides insight into the significance of Irish waters for beaked whales and highlights the importance of using acoustics for beaked whale monitoring. [ABSTRACT FROM AUTHOR]

Global environmental changes are rapidly affecting species’ distributions and habitat suitability worldwide, requiring a continuous update of biodiversity status to support effective decisions on conservation policy and management. In this regard, satellite-derived Ecosystem Functional Attributes (EFAs) offer a more integrative and quicker evaluation of ecosystem responses to environmental drivers and changes than climate and structural or compositional landscape attributes. Thus, EFAs may hold advantages as predictors in Species Distribution Models (SDMs) and for implementing multi-scale species monitoring programs. Here we describe a modelling framework to assess the predictive ability of EFAs as Essential Biodiversity Variables (EBVs) against traditional datasets (climate, land-cover) at several scales. We test the framework with a multi-scale assessment of habitat suitability for two plant species of conservation concern, both protected under the EU Habitats Directive, differing in terms of life history, range and distribution pattern (Iris boissieri and Taxus baccata). We fitted four sets of SDMs for the two test species, calibrated with: interpolated climate variables; landscape variables; EFAs; and a combination of climate and landscape variables. EFA-based models performed very well at the several scales (AUCmedian from 0.881±0.072 to 0.983±0.125), and similarly to traditional climate-based models, individually or in combination with land-cover predictors (AUCmedian from 0.882±0.059 to 0.995±0.083). Moreover, EFA-based models identified additional suitable areas and provided valuable information on functional features of habitat suitability for both test species (narrowly vs. widely distributed), for both coarse and fine scales. Our results suggest a relatively small scale-dependence of the predictive ability of satellite-derived EFAs, supporting their use as meaningful EBVs in SDMs from regional and broader scales to more local and finer scales. Since the evaluation of species’ conservation status and habitat quality should as far as possible be performed based on scalable indicators linking to meaningful processes, our framework may guide conservation managers in decision-making related to biodiversity monitoring and reporting schemes. [ABSTRACT FROM AUTHOR]

Strontium isotope ratios (87Sr/86Sr) are gaining considerable interest as a geolocation tool and are now widely applied in archaeology, ecology, and forensic research. However, their application for provenance requires the development of baseline models predicting surficial 87Sr/86Sr variations (“isoscapes”). A variety of empirically-based and process-based models have been proposed to build terrestrial 87Sr/86Sr isoscapes but, in their current forms, those models are not mature enough to be integrated with continuous-probability surface models used in geographic assignment. In this study, we aim to overcome those limitations and to predict 87Sr/86Sr variations across Western Europe by combining process-based models and a series of remote-sensing geospatial products into a regression framework. We find that random forest regression significantly outperforms other commonly used regression and interpolation methods, and efficiently predicts the multi-scale patterning of 87Sr/86Sr variations by accounting for geological, geomorphological and atmospheric controls. Random forest regression also provides an easily interpretable and flexible framework to integrate different types of environmental auxiliary variables required to model the multi-scale patterning of 87Sr/86Sr variability. The method is transferable to different scales and resolutions and can be applied to the large collection of geospatial data available at local and global levels. The isoscape generated in this study provides the most accurate 87Sr/86Sr predictions in bioavailable strontium for Western Europe (R2 = 0.58 and RMSE = 0.0023) to date, as well as a conservative estimate of spatial uncertainty by applying quantile regression forest. We anticipate that the method presented in this study combined with the growing numbers of bioavailable 87Sr/86Sr data and satellite geospatial products will extend the applicability of the 87Sr/86Sr geo-profiling tool in provenance applications. [ABSTRACT FROM AUTHOR]

Accurate estimation of the fraction of absorbed photosynthetically active radiation (fPAR) for maize canopies are important for maize growth monitoring and yield estimation. The goal of this study is to explore the potential of using airborne LiDAR and hyperspectral data to better estimate maize fPAR. This study focuses on estimating maize fPAR from (1) height and coverage metrics derived from airborne LiDAR point cloud data; (2) vegetation indices derived from hyperspectral imagery; and (3) a combination of these metrics. Pearson correlation analyses were conducted to evaluate the relationships among LiDAR metrics, hyperspectral metrics, and field-measured fPAR values. Then, multiple linear regression (MLR) models were developed using these metrics. Results showed that (1) LiDAR height and coverage metrics provided good explanatory power (i.e., R2 = 0.81); (2) hyperspectral vegetation indices provided moderate interpretability (i.e., R2 = 0.50); and (3) the combination of LiDAR metrics and hyperspectral metrics improved the LiDAR model (i.e., R2 = 0.88). These results indicate that LiDAR model seems to offer a reliable method for estimating maize fPAR at a high spatial resolution and it can be used for farmland management. Combining LiDAR and hyperspectral metrics led to better performance of maize fPAR estimation than LiDAR or hyperspectral metrics alone, which means that maize fPAR retrieval can benefit from the complementary nature of LiDAR-detected canopy structure characteristics and hyperspectral-captured vegetation spectral information. [ABSTRACT FROM AUTHOR]

Urban extent data play an important role in urban management and urban studies, such as monitoring the process of urbanization and changes in the spatial configuration of urban areas. Traditional methods of extracting urban-extent information are primarily based on manual investigations and classifications using remote sensing images, and these methods have such problems as large costs in labor and time and low precision. This study proposes an improved, simplified and flexible method for extracting urban extents over multiple scales and the construction of spatiotemporal models using DMSP/OLS nighttime light (NTL) for practical situations. This method eliminates the regional temporal and spatial inconsistency of thresholding NTL in large-scale and multi-temporal scenes. Using this method, we have extracted the urban extents and calculated the corresponding areas on the county, municipal and provincial scales in China from 2000 to 2012. In addition, validation with the data of reference data shows that the overall accuracy (OA), Kappa and F1 Scores were 0.996, 0.793, and 0.782, respectively. We increased the spatial resolution of the urban extent to 500 m (approximately four times finer than the results of previous studies). Based on the urban extent dataset proposed above, we analyzed changes in urban extents over time and observed that urban sprawl has grown in all of the counties of China. We also identified three patterns of urban sprawl: Early Urban Growth, Constant Urban Growth and Recent Urban Growth. In addition, these trends of urban sprawl are consistent with the western, eastern and central cities of China, respectively, in terms of their spatial distribution, socioeconomic characteristics and historical background. Additionally, the urban extents display the spatial configurations of urban areas intuitively. The proposed urban extent dataset is available for download and can provide reference data and support for future studies of urbanization and urban planning. [ABSTRACT FROM AUTHOR]

The hydrography and dynamics of NW Iberian margin were explored for July 2009, based on a set of in situ and remote sensing observations. Zonal sections of standard CTD casts, towed CTD (SeaSoar), Acoustic Doppler Current Profilers (ADCP) and Lagrangian surveys were made to characterize cycles of upwelling and relaxation in this region. Two periods of northerly winds, bounded by relaxation periods, were responsible for the formation of an upwelling front extending to the shelf edge. An equatorward flow was quickly set up on the shelf responding to the northerly wind pulses. South of Cape Silleiro, the development and subsequent relaxation of an upwelling event was intensively surveyed in the shelf, following a Lagrangian drifter transported by the upwelling jet. This region is part of an upwelling center extending from Cape Silleiro to Porto, where the surface temperature was colder than the neighboring regions, under upwelling favorable winds. As these winds relaxed, persistent poleward flow developed, originating south of the upwelling center and consisting in an inner-shelf tongue of warm waters. During an event of strong southerly wind, the poleward flow was observed to extend to the whole continental shelf. Although the cruise was executed during summertime, the presence of river-plumes was observed over the shelf. The interaction of the plumes with the circulation on the shelf was also described in terms of coastal convergence and offshore advection. The sampling of the offshore and slope regions showed the presence of the Iberian poleward current offshore and a persistent equatorward flow over the upper slope. [ABSTRACT FROM AUTHOR]